NO SOUND NO WEBCAM NO MIC
Hello all as it says in the subject NO SOUND NO WEBCAM NO MIC i have updated all drivers and full system restor baught new speakers but steill nothing but i put ear phones in i get sound please help
thanks all tony
Hi,
barney74 wrote:
hello all i have hp pavilion dv9500 and i have no sound no webcam no mic please help
on the sound i can see the green part on the volume control move so i know drivers are fine but i cant hear it at all i bought new speakers and fitted them still no sound im thinking hardwear prob there is a chip that feeds them all and also the power button could it be this please help thanks all
Which operating system is installed?
What do you mean by "fitted speakers"? Do you mean plugged the connector in?
What is the exact product name/number of your notebook?
Is there no webcam or mic internally installed or do you mean that they are not working?
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer
Similar Messages
-
No sound no webcam no mic please help
hello all i have hp pavilion dv9500 and i have no sound no webcam no mic please help
on the sound i can see the green part on the volume control move so i know drivers are fine but i cant hear it at all i bought new speakers and fitted them still no sound im thinking hardwear prob there is a chip that feeds them all and also the power button could it be this please help thanks allHi,
barney74 wrote:
hello all i have hp pavilion dv9500 and i have no sound no webcam no mic please help
on the sound i can see the green part on the volume control move so i know drivers are fine but i cant hear it at all i bought new speakers and fitted them still no sound im thinking hardwear prob there is a chip that feeds them all and also the power button could it be this please help thanks all
Which operating system is installed?
What do you mean by "fitted speakers"? Do you mean plugged the connector in?
What is the exact product name/number of your notebook?
Is there no webcam or mic internally installed or do you mean that they are not working?
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Output sound distortion when USB Mic Connected
Hi everyone,
Really appreciate anyone’s help on this sound distortion problem.
I have been using the new 2014 iMac 27' for last 8 Months, bought Brand New, and recently updated to Yosemite. Everything worked fine including recording, until this update.
I'm using Blue Yeti USB Mic for recording, and few days after the update I was trying to record in GarageBand and the output sound (via headphone connected to USB MIc) started to distort and then suddenly dropped the bitrate/ sound and I could only hear some clicks. I reinstalled the GargeBand, still its the same distortion happens. The sound gets back to normal, only for few seconds, after I unplug the USB cable from the Mic device. And I tried changing the bit rate and again sounds starts to drop after few sec. This happens only when I connect the Blue Yeti USB Mic and sound output from the Mic itself. Same thing happens with iTunes as well. Output sound from Internal mic and speakers are working fine as normal.
I tried connecting the USB Mic to my Windows laptop and its working fine with the Cubase 5 without any problem. So the problem is with the output sound, when external Mic connected.
I don’t know the solution for this. Have checked on every single blog/ thread, sill couldn’t find the answer I’m looking for, to fix this.
It would be great if you have any kind of a solution for the same.
Info : FYI
Mac
OS X Yosemite: Version 10.10.2
iMac (27-inch, Late 2013)
Processor : 3.2 GHz Intel Core i5
Hard-drive : 1 TB SATA Disk
Ram: 8 GB 1600 MHz DDR3
Graphics: NVIDIA GeForce GT 755M 1024 MB
Built-in Output:
Default System Output Device: Yes
Manufacturer: Apple Inc.
Output Channels: 2
Current SampleRate: 48000
Transport: Built-in
Yeti Stereo Microphone:
Default Input Device: Yes
Default Output Device: Yes
Input Channels: 2
Manufacturer: Blue Microphones
Output Channels: 2
Current SampleRate: 48000
Transport:Nope. The larger buffer didn't work. What did work was running a cord out of the 1/4-inch jack from the direct box to a 1/4-to-1/8-inch adapter and then into the mic/line-in jack on my computer. I set GarageBand to use the built-in line-in and had no static problems. It's a stopgap until this gets fixed.
A post by LinuxMercedes on Oct. 3 at http://discussions.apple.com/message.jspa?messageID=8158914 may provide a solution. -
I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc
I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc
-
Can I use my headset for "sound-out" and phone mic...
I have an E51 and the headset that came with it. I would like to achieve the following during calls: To use the headset for sound-out (i.e. as headphones) and the phone mic for sound-in. The mic on the headset gives a lot of static and I would rather use the phone mic (girlfriend complains).
So I tried this: Under Tools>Settings>General>Enhancement, I set the Default to Headphones.
Still, when I connect my headset it says "Default Enhancement: Headset" and the headset mic is automatically used.
The default enhancement settings does not seem to matter.
Does anyone know if there is a way to solve this? Is there a way to manually switch between the headset and phone mics?
Thanks!Thanks for the reply. I am not using a bluetooth headset but a cabled one (that one that came with the phone for me -- I guess nokia skimped a bit here, not shipping with a bt headset).
I was recently told basically the same thing you are saying in a store, that it is not possible to use the mic for sound-in during a headset call. He also said that any cabled headset or even *headphones* will be recognized as a headset by nokia phones because they all have the same 3 connectors (right, left, mic) on the 2.5mm jack. Can that really be right?
So that means that even if I get a set of cabled headphones for my e51, I will not be able to use them for sound-out during a call?
cheers -
Sound blaster tactic sigma3d mic
hello, i've had my sigma for almost a year now and i barely used my mic. the mic doesn't work anymore and i don't know whats the problem.my computer doesn't detect any sound when i do mic tests but the computer recognizes that the mic is connected. could you help me and try to help me find out whats the source of this problem? thanks.
EDIT: i barely use my mic and i leave it in my headset and i only take it out every often. (last time i took it out was 4 months ago)same problem, always freezes and have not been able to get it to work
-
AA3 Sound input from computer mic port-help needed
My new HP desktop has Vista 64 home premium (with creative soundblaster soundcard upgrade) and
I've installed audition3 and have it working fine when using audio files
but now I want to record audio using the mic port on the desktop. I have a headset mic (from dragon speaking software)
and the windows sound recorder hears the mic just fine. I am going nuts trying to get AA3 to hear it!
Any turotials I haven't found yet?I spent 3 hrs at it, durin and steve thanks! now
there is audio from the mic input in edit view. I hope to find it in multitrack view but need a break!
my problem with vista is that i'm so anti-change that i'd rether stay with it. I dont know how to change to Win 7 and as Steve says there3 is concern that we waqit for next version so the bugs are fewer. like Steve, I liked XP; I would take it back, but I'm not a tecchie and have no time to learn these thiongs.
thanks again
JohnO -
My sound nor webcam does not work on my Satellite L505D-GS6000. how can i get it to work again?
As well as the full model number, which you have given, you should always give the operating system and version that you are running, like Windows 7 32bit.
Also, a little history of what happened would be useful. Did you just upgrade to Windows 7? Did you recently install some software or critical or important Windows Update? Etc? Specifically, when did the sound and webcam stop working? What happened just before that might have created the problem?
If you installed some software, new hardware, or Windows Updates just before sound & webcam stopped working, go into System Restore and go to the restore point around the date things messed up.
Otherwise, you could try reinstalling the sound & webcam drivers for your operating system version. Here's the driver/utility page for your system:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=252079...
Good luck.
Mike -
Need sound and webcam drivers for Satellite A660-156
hi all,
my hard disk was physically damaged and replaced by new one. All data and setting were copied.
But I found that no sound and webcam drivers are installed. I successfully had found them and installed, but still no changes. See sound icon with 'no sound' indication, click on it to fix the problem, but no problems have been found.
Offered to see additional info or close the window. On Toshiba website found two sound drivers, but it doesn't help.
Any idea how to fix that problem?
Thnx in advance!Hmm I think you shoud ochekc if you have installed all the drivers in the right order:
Here is the one which i found in one thread:
1 Windows 7 64bit
2 QFE KB974332
3 QFE KB974431
4 QFE KB974571
5 QFE KB975467
6 QFE KB975806
7 QFE KB978258
8 QFE KB977620
9 QFE KB975777
10 QFE KB972270
11 QFE KB977609
12 QFE KB979099
13 QFE KB978251
14 QFE KB971468
15 QFE KB975560
16 QFE KB977074
17 QFE KB978207
18 QFE KB978506
19 QFE KB978262
20 QFE KB976422-x64
21 Registry Patch for System Restore V1.00.00
22 PlayReady PC Runtime 1.3
23 TOSHIBA Bulletin Board 1.6.07.0
24 TOSHIBA ReelTime 1.6.06.0
25 Intel Chipset SW Installation Utility 9.1.1.1024
26 Intel Management Engine Interface V6.00.40.1215
27 NVIDIA Display Driver 189.58
28 Intel Turbo Boost Technology Driver 1.1.1.1007
29 Intel Rapid Storage Technology Driver 9.5.7.1002
30 TOSHIBA Supervisor Password Utility 1.63.0.9C
31 TOSHIBA HW Setup Utility 1.63.0.22C
32 TOSHIBA Flash Cards support utility 1.63.0.6C
33 TOSHIBA Value Added Package 1.3.4_64
34 Realtek Audio Driver 6.0.1.6069
35 NVIDIA HD Audio Driver 1.0.9.1
36 Broadcom Wireless LAN Driver V5.60.48.35_DrvOnly
37 Synaptics Touch Pad Driver V15.0.8.1
38 TOSHIBA HDD Protection 2.2.0.4
39 Bluetooth Stack for Windows by Toshiba v7.10.10(T)
40 Realtek LAN Driver V7.013.0112.2010
41 Jmicron Card Reader V1.00.44.01
42 ENE CIR Driver (if available) V3.2
43 YUAN DVB-T/ATSC Tuner Driver (if available) 2.3.3.31
44 TOSHIBA Sleep Utility 1.4.1.1
45 TOSHIBA eco Utility 1.2.11.64
46 Intel Proset 13.1.1.0.1.s64
47 TOSHIBA HDD/SSD Alert 3.1.64.6
48 TOSHIBA Service Station 2.1.40
49 HDMI Control Manager 2.0.0.5.64
50 TOSHIBA Remote Control Manager 3.0.1.0
51 TOSHIBA PC Health Monitor 1.6.0.64
52 TOSHIBA Fingerprint Utility 1.0.2.27
53 ConfigFree 8.0.29
54 TOSHIBA Web Camera Application V1.1.1.15
55 TOSHIBA Face Recognition 3.1.3
56 TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-7
58 PatchFiles PCIIDEREG-1.1
59 PatchFiles TosVolRegulator_x64_1.1 -
Why is my built in webcam and mic on my hp pavilion dv6-6113cl not working?
why is my built in webcam and mic on my hp pavilion dv6-6113cl not working?
Enter the device manager and verify that the webcam is present and has a driver installed.
1) Test your webcam by using the YouCam software that was delivered with your notebook. (you should also be able to test it with MSN or Skype setup). You may have to uninstall it and then reinstall the software.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
I have an Irig but sound still records through mic on my ipod. How do I know if my iRig works??
Does Settings > GarageBand > Crosstalk Protection > On help?
tt2 -
[MSI GT60 0NC] WEBCAM and Mic Problem
Hello,
I have a problem with my webcam and mic.
- People hear me from really far when I use skype even if i talk with a 1cm distance from the mic.
- The webcam is not detected by skype or msn. When I go to the device manager there is no (!).
Can you help me ?
Thanks
TeddyThanks a lot ! I have never noticed this webcam key (F6) !!!
I tried to boost up the mic but didn't work. I am trying to d/l the latest realtek drivers and I will let you know. -
Is it possible to use USB webcam + USB mic simultaneously?
I would like to use a USB mic (Blue Snowball USB) and USB webcam (Ligoitch Quickcam) together simultaneously, because I understand the one is good sound and the other is good video for live internet broadcasting of music.
can anyone tell me if this should be possible? I'd hate to buy them and find it doesn't work... THANKS!
I'm using Macbook 2.2 GHz Intel Core 2 Duo OSX 10.5.8No reason why not.
-
Calling all sound wizards: webcam not recording audio
Hey guys so I just bought a Creative Live! HD 1080 webcam to record video on my computer, and for some odd reason, the audio does not record with the video when I use the webcam's software. I experienced the same issue using ManyCam, but I did find that SmartPixel webcam software recorded audio when I used my headset, however it did not record audio with just the webcam mic.
I've tried just about everything in the control panel that would be related to sound, and that doesn't seem to be solving the issue. I also went to accessories: sound recorder to see if the audio would record from there, and it did.
I want to also note that the same issue occurred while using the Logitech c920. I returned that one because I could not get the audio OR video to record.
I am currently using Realtek High Definition Audio and Windows 7 Ultimate 64-bit. I've updated all drivers.
There must be a solution to this - anyone have some bright ideas?Are you launching Captivate with Run As Administrator privilege?
If one of your co-workers logs onto your PC with their user profile, does the same microphone that doesn't work for you work OK for them? -
I can't listen to songs or sound while facetiming or while I'm on a app but when I go into sounds and turn the ringer up I can hear that so I know that my speakers work. My mic doesn't work either.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
MacBook Pro Connecting to a Samsung TV trouble. Please help ^^
Hi, I have been trying to connect my Macbook Pro to my Samsung TV LE32B530P7W (HDTV) with a MINI DISPLAYPORT to HDMI adapter and then the HDMI cable, but nothing shows up on the TV (it says no signal), what should I do to make it work?? Do I need to
-
Mac Mini Ethernet dead.
The title is pretty self-explanatory--I have tried installing the restore discs and it didn't help any. I can't go to the Apple Store or any authorized Apple repair people because they're in Utah, or because they're insanely far away from my town. I
-
EMail report in HTML format in Background
Hi all, We have a report which sends the output in HTML format to the internet email address. We use the function module SO_NEW_DOCUMENT_ATT_SEND_API1 for doing this. When we are executing this in foreground the entire output is available in the HTML
-
My bookmark drop down menu disappeared next to the home button on firefox 4. When I right click customize, the bookmark drop down appears on menu bar, but when clicking done, it's gone again. I went into customize and removed it then put it back. Whe
-
After last update my iphone doesn't work as a USB modem anymore
Hi, I installed some softwareupdate to my MacBook Air today - and now my iPhone doesn't work as a USB modem anymore. Connecting via Wifi works. But this drains too much batteries - and USB usually works more consistant for me (and it connects a lot f