No sound not muted please help and thanks

My iPad was working great the first part of the day yesterday and then later that night I went to listen to some music and there was no sound. I plugged in my headphones and nothing. I checked to see if it was muted and it wasn't I also checked the switch above the volume and it wasn't muted either. Is my iPad broken? Please help and thank you in advance.

Do you have sound through the built in the speaker?
You could try resetting the iPad and see if the sound comes back. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
You can also try reinserting the headphones and removing them a couple of times and see if the sound comes back on.
The side switch will mute system sounds if it is set to do so. Music will still play even if you mute system sounds.

Similar Messages

  • HT201304 ello my little brother has developed lock my iPhone and I could not see the unlocking code Please help and thank you

    Hello
    ello my little brother has developed lock my iPhone and I could not see the unlocking code Please help and thank you
    edited by host

    Hi Omar_a983,
    If you are having an issue with the passcode on your iPhone, you may find the following article helpful:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Regards,
    - Brenden

  • Just got my Mac air and i would like to make a file to store some web addresses for my new business with rodan and fields and I can't do it. Made the file but i cant copy and paste the web addresses in the file to save them. Please help and thank you.

    Just got my Mac air and i would like to make a file to store some web addresses for my new business with rodan and fields and I can't do it. Made the file but i cant copy and paste the web addresses in the file to save them. Please help and thank you.

    Yes - well you have to make the file in a word processing Application.
    You could use TextEdit (it's free) Pages (words only), or Numbers (data base) (they are part of iWorks - and may or may not be free (included) on your machine.  You could use MS Office (it is not free) You could use any Open source word processor that plays well with Office (NeoOffice, StarOffice) they are free.
    That's how you create content and copy/paste URLS. Then you save the file to the desktop. If you are going to make more than one file... you make a folder on the desktop and save, or drag the file(s) into it.
    You attach it to your e-mail client which will compress it and e-mail it. An excellent reference is to use Help, from the menu bar, also from inside any application. From your library or book store the OS X for Dummies has a lot of useful information (you don't read it cover to cover but look up chapters about what you'd like to do)
    You can also make appointments at your local Apple store for individualized help (if a store is nearby)

  • HT201210 I have a iPhone 3 g, I'm doing update and give me error 1015 Please help and thank you

    I have a iPhone 3 g, I'm doing update and give me error 1015 Please help and thank you

    You can not get help here per the terms of service. Discussing jailbroken devices is forbidden.
    The ONLY thing we can advise you to do is try putting the phone in DFU mode (google for instructions) and restore it.
    Beyond that, you're on your own.

  • Hello I want to change the plan Single App to Photography please help and thank you

    Hello I want to change the plan Single App to Photography please help and thank you

    Hi Rasheed,
    Contact Adobe support for that: https://helpx.adobe.com/contact.html
    Thanks,
    Kevin

  • Sound not working. please help!

    hello, I just got this new iMac that i got used and the sound on the computer does not seem to be working, I have tried doing what the computer tells me and going into System Prefrences and selecting the sound option, but the sound seems to have been permanantly disabled and shows that there are no output or input devices available, when clearly the monitor has speakers. whats more, is that the volume icon does not show up in the menu bar even when I select that I want it in the menu bar. I would greatly appreciate if someone would get back to me on this as soon as possible and tell me what the **** is going on because I dont know what to do and I want my sound. So Please Help!

    Do you hear the startup "bong" sound when powering up the iMac?  If you do, that means the speakers work and there is probably something messed up in software or settings.
    First, try resetting PRAM.  This is the procedure.
    http://support.apple.com/kb/HT1379
    Sound volume setting is one of the things stored in PRAM.  If you hear the startup sound after holding down those four keys at startup, then your speakers are probably working now.

  • Hi,may computer sound is cutting,please help me thank u

    Hi
    My computer sound is cutting
    Please help
    Thank u

    1. Reset PRAM.  http://support.apple.com/kb/PH14222
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • I have bought Adobe Flash on my school computer (Windows 8) and I'm trying to get it on my home computer (Windows 8). I'm stuck with my serial number, how do I find it? It is asking me for my serial number and I don't remember it. Please help and thanks.

    I am in desperate need of finding my serial number so please help asap!

    Hi,
    Which version of Flash Pro are you on? If on Flash CC and are being asked for a password, see Creative Cloud applications ask for serial number
    If you are on a perpetual license of CS6 or earlier, contact Adobe Customer CareContact Customer Care
    Thanks,
    Preran

  • My daughter has an iPod touch and is emailing a much older boy via text free app she downloaded. How can I see the conversations? Please help and thank you

    Please help me...My 12year old daughter has been talking to a older teenager through the text free app. How can I see the conversations? Also, there is a photo vault that is locked. What is that? Please someone help me. I don't know what else to do. I paid and downloaded a program that is supposed to tell you everything that's on the ipod but that was a joke. Thanks for your help.

    As long as you can't get a hold of the device, you can't do anything more than talking to your daughter about it.
    Erasing the device could also be an option to keep her from using apps you don't want her to have on her device.
    Try talking first

  • Please help and thank you

    i visited Belguim and there i bought an Iphone 4s second-hand but the phone now is stuck on icloud activation screen and i have really no contact with the previous owner and im stuck, please help , the phone's imei is :  PLEASE HE
    <Personal Information Edited by Host>

    Hi Rasheed,
    Contact Adobe support for that: https://helpx.adobe.com/contact.html
    Thanks,
    Kevin

  • While upgrading my 3,2 8 core power Mac , it will not boot. Going from 10.8.3 to 10.8.4. There is no visible video after chime.  I need to get up and running ASAP.  Could the video drivers have not loaded. Please help and thank you. Ps. Main drive ssd.

    The Mac will not boot to a cd, Mac or disk warrior.
    It will run for  10 minutes with no video, then shut itself down.
    I've attempted Cd boot, zapping Pram, safe mode,
    My new Dell monitor power light pulses as if no video is present
    Wondering if the vid.  driver did not load during update?
    Can't seem to light one pixel, no matter what.
    Thanks.
    Mac Pro 8 core 32 gigs ram gtx285 card
    512GB  ssd.  3 other slots 1,5 TB seagates.
    Thanks for reading and responding

    Update on this issue. I replaced the video card with an old one that I had and it boots fine.
    Question, if a driver were missing from the update process, would I see anything on the screen at all. I had pure black as if no signal was carried to the monitor. I'm trying to rule out hardware failure, as this card is 1.5 years old.
    thanks!!!

  • Ipod nano sound not right - please help!

    Hi, I got an ipod nano for my birthday today, followed the instructions and loaded it all in, loaded all my CD's into itunes, loaded them all onto the nano, but when I finally came to listen to my songs, the sound is all weird. The vocals are very quiet and out of sync with the music, and the music sounds 'distorted'. Any ideas?? All help greatly received, I'm so sad!

    Lianne:
    Welcome to the Apple Discussion Boards. I assume as this is your first post that you have not used Macs or iTunes before. Have you listened to your music within iTunes on your computer? Does it sound OK there?
    As a first step, I would check your settings in iTunes. Go to Preferences/Advanced/Importing and be sure the setting are at least 160kbs (High Quality).
    David

  • Hi, my friends ID and password works fine for downloading apps etc but when I try to set up iMessage once you put in the apple I'd and password it say email incorrect so can't go any further but we know this is correct. please Help and thanks

    Hi
    I have set up iMessage and FaceTime and tried to set up for a friend but won't work? The apple ID is ok as downloading Apps but when I try to set up iMessage it won't go to the next stage as it says the EMail can't be verified? Either though we know its working
    Please help

    Reset all settings and try again. If that doesn't help contact Apple.

  • My ipod nano touch screen is not responding please help, and i tried to hold down the volume and power button but its still not working

    ipod nano touch screen is not responding to my touch and whenever i click on something it just shows up as a white box

    Have you double check to make sure VoiceOver and other accessibility features have not been turned on?  See this article for more information and assistance.
    iPod nano (6th generation): How to use VoiceOver
    B-rock

  • HT4993 I am unable to send text imessages after update on 4S...please help and thank you.  They just sit there in the sending mode.

    I am unable to send text messages after the update.  They just sit there in "sending" mode.  Thank you.

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste (command-V) into the text box that opens, then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Maybe you are looking for

  • Getting inventory error while running Opatch command after R12.1.1 installe

    edcdqh0:/db01/opt/oracle/product/11.1.0_egebrt> $ORACLE_HOME/OPatch/opatch lsinventory -invPtrLoc /db01/opt/oracle/product/11.1.0_egebrt/inventory Invoking OPatch 11.1.0.6.2 Oracle Interim Patch Installer version 11.1.0.6.2 Copyright (c) 2007, Oracle

  • Web Auth Cert Download

    I have a verasign cert that I put on all my old bbsm's for guest portal access via https. I wanted to put that cert on my 5508 controller as well for the same purpose. But when I try to download it I get a message saying it failed, even though the tf

  • How Change Flash CS5.5 save file CS5.

    Hi, I using Flash CS5.5. But i am save the file save default CS5.5. We need to save CS5 Format. With Using Save As option. Default save CS5 format.  What to do? Any setting change in CS5.5 Default save CS5 format. or what way change the format. any o

  • Wizard based forms Master-Detail

    I was wondering how I could used the Browse/Edit forms generated by the wizards for BC4J-JSP and UIX-JSP pages to create a "tabbed page" Mater-Detail type application. Suppose I have a PurchaseOrderMaster (POM) vo and a PurchaseOrderDetail (POD) vo.

  • Invalid translation in bill of exchange

    Hello, In the french localisation, a failed bill of exchange dit not generate the good remarks in journal entry, the remarks have the value : "Annuler entrée pour numero d'encaissement XXXX". But this bill of exchange is failed not cancelled. So the