No sound on any video playback after 5-10 seconds

The sound on my second generation ipad seems to disappear after 5-10 seconds of watching any video playback, although sound works when i stream to my apple TV so I'm assuming its the device that's problematic. Any suggestions on how to resolve this issue and get sound from the ipad would be greatly appreciated.

Perform a "reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
Then test to see if it solved the problem.

Similar Messages

  • My MacBook will not play videos. No sound and the video stops after a few seconds.

    My Mac book pro will not play videos. No sound and the video stops after a few seconds.

    Hello GrahamBIOM,
    I understand while viewing a video or listening to some different content, you lose audio, is that correct? I will do all I can to assist you with this issue.
    Does the issue occur when you have headphones inserted? If you are not sure, if you have a set of headphones available could you test that please?
    Please respond back at your earliest convenience with results.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • After the latest update my laptop stopped playing any sounds and any videos. How can I fix this?

    I have the HP envy 14-2166se and downloaded the newest update from HP today and I can no long play any sounds or any videos. If someone could help that would be great. 

    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook. You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
    Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Slow video playback after reinstalling Geforce2 MX  card

    Ok, reinstalled (took out the 9200 card) my Geforce2Mx card and now everything is in super slow motion - video, scrolling, typing, opening and closing of apps, pull down menus, loading of web pages - everything. It's like being back on an old SE30 and now even that seems fast to what is happening now. What did I do wrong? Tried rebooting a few times and resetting pram with no better results.
    G4 Mac OS X (10.3.9)
    Posts: 536
    From: Vancouver, Canada
    Registered: Dec 30, 2005
    Re: Slow video playback after upgrading to ati 9200 card
    Posted: Apr 10, 2006 11:56 PM
    in response to: G J
    Press the button near the battery on your logic board, it will reset the PMU, which might help.
    Gigabit Ethernet G4 upgraded 1.2Ghz, 120GB HD, 10GB HD, 1GB RAM Mac OS X (10.4.6) ibook G4 1.42Ghz, 80GB HD, 786 MB RAM, 1GB iPod Shuffle
    Tried that also with no results. Also repaired permissions. What could have happened to the machine to do that?
    G4 Mac OS X (10.3.9)

    Installed the modified Radeon ATI 9600 Pro for G5 Edition card and I still have the same slow video playback results. However when I boot up from another internal hard drive I do not have the video problems. Everything works just fine. Both of my hard drives had no video problems before screwing around with the ATI cards and now the one still has the problems with the video playback. This one also has Classic on it and Classic also runs slow. BTW I don't know if this has anything to do with it but when I ran a search result for "ATI" no files are installed on that 2nd hard drive which is playing video and loading pages with no problems. Would trashing all those ATI files on the slow drive do anything to help? Or is this just a coincidence?

  • TS3274 My I pad will no longer do key board clicks and there is no sound to any videos

    For some reason my ipad no longer has keyboard clicks, and has no sound to any videos. I have checked to make sure all is turned on. Turned off then back on. I am at a loss.....any suggestions?

    Hi Grdning,
    If you are having issues with sounds from the built-in speaker on your iPad (keyboard clicks, audio for videos, etc), you may find the troubleshooting steps in the following article helpful (it is primarily aimed at iPhones but the steps should still apply for iPads, other than the speaker location info):
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Regards,
    - Brenden

  • Can't get any video playback in program or source monitor after updating premiere

    I'm having a problem I hope someone might be able to shed some light on. I just updated my premiere pro cc to v8.2 Everything Worked fine before I updated.  Now I can't get any video to play back. I can hear the audio in my timeline but the video does not show up. When I export though everything is fine and the video is there. So basically I cant get any video to play in my program monitor or my source monitor.

    Please double-check that the same sequence that's open in the current Timeline is also loaded in Program Monitor. We recently discovered a bug that resulted in the Program Monitor having a different sequence loaded than the active Timeline. The scenario in which this occurs is as follows:
    Open two sequences (or more) in the same panel, say Seq_A and Seq_B.
    Set focus on Seq_B.
    Maximize the Project Panel.
    Double-click Seq_A in the Project Panel.
    At this point, the Project Panel reverts to its normal size and the Program Monitor loads Seq_A, but Seq_B remains in front of Seq_A. This disconnect persists if you set focus on the Seq_B Timeline; when Seq_B is played with things in this state, you will hear that sequence's audio, but the Program Monitor will remain static.
    This is not likely to explain your situation, but it's worth ruling out before pursuing further troubleshooting.

  • Program Monitor is Black, no video playback after installing new graphics card

    I bought a PNY Nvidia Quadro 2000 graphics card a few days ago, and since it's been installed, I've been unable to watch video playback in my program, source or even reference monitor.
    Similarly, If I designate one of my monitors soley for video playback, the screen is just black, and as the timecode advances on my timeline I only hear sound.
    My project is using "Mercury Playback Engine GPU Acceleration" for Premiere Pro CS6.0.1
    I went from using one graphics card to using two graphics cards, and installed a third monitor. I've spent the last few days trying everything I could think of, I even uninstalled and re-installed premiere.
    Hardware Specs:
    Windows 7 Ultimate (64-bit)
    HP Pavilion h8-1230z
    AMD-FX8150 3.59Ghz 8 core processesor
    16GB RAM
    600W PS
    EVGA Nvidia GeForce GTX 550Ti
    PNY Nvidia Quadro 2000
    I am using a PCI x16 for the Quadro 2000
    I am using a PCI x1 slot w/x1-x16 adapter for the 550Ti
    Could this be the problem?
    Additional Information
    Vectorscope, All scopes, YC Waveform - Display modes all work.
    I downloaded the most recent Nvidia drivers for both of my cards.
    I haven't received any error messages or had any problems in After Effects CS6, as video playback is working properly in my other adobe applications.

    I am still building a new system, so currently I'm still using a 480. You can read all about my choices and progress here: Adobe Forums: Planning / building a new system. Part 1
    There are 11 entries in the Benchmark Results that succesfully use the GTX 680, even though it is not 'supported'. They all use the 'hack'. However, the 680 has been added to the list of supported cards for AE, so it is only a matter of time before the 680 will be added to the list of supported cards for PR. Todd had made that clear. Now, when the 680 is added, it makes sense that the 670 will also be added. My guess is that both will be added in a short while.

  • Flash videos stop after about a second of playback ?

    ANY flash videos that are played inside Internet explorer OR
    firfox stop after about a second of playback, I can drag the slider
    to the middle of the video and it will play for another second then
    stop. Can anybody HELP. PS I also have NO sound in any FLASH stuff
    since installing flash player 9. ALL other video's (WMP,MOV,RM)
    play OK WITH sound

    Hi ATR
    Thanks for the advice and ideas.
    I think that the vertical white line basically just shows where the mouse pointer last was relative to the time line, and if you move it from the editing window to the viewing window, it retains its last known position on the time line.
    None the less - I implemented your suggestion.
    Even if I move the clip further down the timeline, the playback stops about 1-4 secons after I hit play. Even if I move the clip 60 seconds back from the starting line, playback stops while the the playback position is running through the empy space prior to reaching the new starting time of the clip.
    If I move the blue cursor that shows the current playing point to anywhere else in the clip, it plays for about 1-4 second and then freezes as before.
    Clearly the playback freezes regardless of where it is in the content stream.
    I have also discovered a new unexpected feature... The problem seems to be intermittent - if I open a few other clips, and play them, and return to the previous clip, it may run for some time and then freeze. After it has then frozen once, it freezes consistently after 1-4 seconds.
    It is also worth noting that it freezes in quick mode too, regardless of timelines.
    So there you have it - an intermittent issue.
    I have bad to use iMovie in the meantime, which works without issues.
    It is beginning to look like a bug in the application...
    Thanks again for your suggestions.
    Regs
    FF

  • Video Playback After 3.1.2 Update

    I have recently updated to 3.1.2 and now find that some videos, that played perfectly well before the update, are now pixelated and of a considerably lesser standard.
    Is anyone else aware of this issue and is there any way around it?
    Thanks in advance.

    Your suggestion to reset and restore is much appreciated.
    However, I wouldn't have labelled the video playback issue a bug before trying something so basic.
    To review, just like to person who began this thread, when playing back videos on my 2G iPod touch using OS 3.1.2, any attempt to summon the video controls, after about the first 10 seconds of playback, does not work. The iPod offers no response to any gestures on the screen.
    That the iPod's behavior (a) was not observed before the current OS, (b) has been experienced by other users with the same hardware and firmware combination, and (c) continues no matter how many times I reset and restore the device, sounds very much like a bug to me.
    My apologies if I offended anyone with the question I posed at the end of my previous post, but it does seem that, in their rush to get stuff out to us, high-visibility glitches like this are becoming more frequent. Perhaps, with our ridiculously high expectations of Apple, we are in part to blame.

  • Ipod 5.5G hangs on ANY video playback

    I've seen references to this various places, but so far no cure.
    My iPod will not successfully play any video, including any video obtained from the iTunes store. Any attempt leads to a black screen, no audio, and frozen controls. The only way out is to reboot the iPod. No video or sound on the internal screen or when connected to a TV.
    As far as I know, everything else works as advertised. Never any problem with audio-only playback.
    Things I have already tried (but thanks for thinking of suggesting it):
    -- I have tried all 3 settings for "TV out".
    -- I have reset the iPod about 17 times with Apple's 5 Rs.
    -- An Apple "genius" said I needed a new hard drive. Although that sounded like nonsense to me, I did it anyhow.
    -- I tried the little test for video conversion at http://support.apple.com/kb/HT1211. iPod hung on playback of both the original and the converted versions.
    Most or all of these same video files play just fine on the same iPod running RockBox software.

    Perform a "reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
    Then test to see if it solved the problem.

  • No video playback after 20 minutes of editing with

    Hello,
    I have problem with Premiere CS6, which is driving me insane. After around 20 minutes of editing, Premiere stops showing me any video content. I can still interact with the program, the only thing that doesn't work is viewing clips and interacting with them in the timeline. The only things I see are grey boxes.
    After quitting Premiere I cannot immediatly restart it, because it stays forever at "Loading ExporterQuickTimeHost.prm". It is also notable that after quitting Premiere CS6 the application stays in the task manager und is not killable. I read that "Adobe QT32 Server.exe" (which is also still running and is not killable after quitting Premiere) might be the issue but I didn't find a way to fix the problem.
    I am working on Windows 7 64-bit machine with DNxHD enocoded files in a mov-wrapper. I reinstalled Quicktime (newest version) but the problem remains.
    Any suggestions?

    Unfortunatly it didn't help. Playback froze up on me again a minute ago. The DNxHD files I am using contain 6 audio tracks, which Premiere doesn't recognize (it only displays one track) and it also freezes up, when it's automatically creating peak files. Maybe the problem has something to do with that?

  • HP 620 Win 8 64bit - Please fix this HP! No sound and audio/video playback on slow motion

    Please offer native audio drivers for HP 620 Windows 8 64 bit.
    Problems:
    - There is no working audio driver for HP 620 win 8 64 bit (Celeron Intel)
    - Both audio and video playback is on slow motion (speed is like 1 sec is 3 secs).
    I want to use 64 bit version so please do not suggest to do any downgrades. 
    Maxis

    Hello cbabos,
    I see that you are having a no sound problem on your computer. I would like to help with this issue but I need some information.
    Can you provide the model and product number of the computer? Here is a link that shows how to find that information.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Sound from videos stops after a few seconds on Quicktime

    I bought a new Samsung camera and took some videos at a concert. When I put the videos on my MacBook Pro and try to play them on Quicktime, the sound stops after a few seconds. When I try to play them on iMovie or use them in iMovie, not only is there no sound after a few seconds but the sound that is there is sped up.
    The audio works fine in VLC but doesn't seem to work with anything else on my Mac. I've tried Perian, Flip4Mac...
    Codecs: H.264, AAC
    Help?

    I've seen this issue in the past.  I think it is connected to the operating system itself.  I say this because I reinstalled the os using itunes and then restored a backup.  Then garageband started behaving again.  Then the issue came back - after I did an os update.  So I'd try reverting back to a fresh version of the latest os, and then restoring your apps using a backup.
    Hope it helps
    @zorin

  • G5 crashes during iTunes video playback after Leopard install

    I have a G5 1.6 single-processor running 10.5.1. Since I installed Leopard, I have been experiences frequent crashes during iTunes video playback (TV shows bought in the iTunes store). The crashes hang my whole system and require a restart by holding down the power button. The video itself sort of "blip-blip-blips" during the crash, but the mouse and keyboard are unresponsive, windows don't do anything, etc.
    Any thoughts? Anyone else with this problem? Thanks!

    Ever since I installed Leopard on my dual 2ghz G5, neither itunes nor quicktime player works. They both crash on launch. Maybe not the same issue, but I'm regretting the upgrade.

  • Slow video playback after upgrading to ati 9200 card

    Just upgraded my graphics card to the PCI ATI 9200 but now I have slower video playback than I had with the OEM Geforce AGP card. Does anyone know why this has happened? I thought I was gonna get better playback by upgrading
    G4 Quicksilver 733 896mb ram   Mac OS X (10.3.9)  

    Hi,
    Well, you have me scratching my head, that's a real puzzle.
    Try an Open Firmware re-set, do the 're-set all' procedure:
    http://docs.info.apple.com/article.html?artnum=42642
    BTW, ATI (and OWC) has just released this info on their 9600 video card, meaning it's not so good for G4's:
    Knowledge Base
    ATI Customer Care > Product Information > Specifications, Features, Comparisons >
    737-21888: Radeon 9600 PRO PC & MAC Edition list of supported system configurations
    The information in this article applies to the following configurations:
    Radeon® 9600 PRO PC & MAC Edition
    "Quicksilver" Power Mac G4 model
    "Quicksilver 2002" Power Mac G4 model
    "Digital Audio" Power Mac G4 model
    The Radeon 9600 Mac & PC Edition is not compatible with the "Quicksilver", "Quicksilver 2002" or the "Digital Audio" PowerMac G4. If a Radeon 9600 Mac & PC Edition board is installed in one of these systems the result is a blank display.
    For assistance in differentiating Power Mac G4 models, please refer to Apple Article 58418.
    Regards,
    Dave

Maybe you are looking for