No sound on LCD TV when Satellite A200 is connected via HDMI

The problen is: I connect notebook (A200) to LCD TV (Philips) by HDMI. The video is OK, but sound stay on notebook not in LCD TV.
May be the problem is HDMI 1.2 does not support sound and video together? Only 1.3?
Sorry for my English

Sound should work with every HDMI cable as far as I know. Have two of them, one with HDMI 1.3 and another one, which I don't even know, but I guess not the 1.3 standard, as it was pretty cheap.
To enable sound via HDMI you will have to go to control panel - sound. There select the digial output device as standard. Make sure you have closed the media player or any program which has sound output before. Then start player again and sound should now be heard through TV.

Similar Messages

How do you switch output sounds set to my external monitor that is connected via HDMI.

How do you switch output sounds set to my external monitor that is connected via HDMI.

Hello gail from Ajijic,
If you'd like to change the audio output of your Mac, you can do so by accessing the Sound preferences in your System Preferences.
Before you start, open the Output pane of Sound preferences (choose Apple menu > System Preferences, click Sound, then click Output).
Choose a sound output device
From the list of sound output devices, select the one you want to use. All sound output devices available to your Mac are listed, including the computer’s internal speakers, devices plugged into your computer’s sound port (), USB speakers, and AirPlay devices.
For any device plugged into the computer’s sound port, choose Headphones.
OS X Yosemite: Adjust your computer’s sound output settings
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

Can not select TV speakers when connected via HDMI

I have a MBP fully updated connected to a Sony TV vis HDMI/miniport. Up until today this configuration was working fine. Suddenly, I can no longer select the HDMI speakers in my audio preferences. They are recognized and appear on the list but when I select them it has no effect. Before today, when the TV was connected the HDMI output would be automatically selected and I could not access the volume control from the menu bar, which is the way I prefer it.
I have restarted with no success in changing this behaviour. If I open/close the lid, the sound goes to the proper settings for about 2s but then the HDMI speakers are de-selected and the built-in speakers are highlighted. I can manually select the TV speakers but the setting has no effect.
However, I *am* getting audio output through the TV but can not control volume from the mac or any app. I slide the volume slider on the menu bar and the audio output does not change. The sound is also playing from the laptop speakers which is highly annoying.

and now there is no audio through the TV at all. TV works fine with other inputs such as PS3. Any help?

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working, help!

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working. help!

I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
Why are you posting in this forum about what occured with an independent service provider? How is is at all relevant to Apple?? In fact, service by any person or business not authorized by Apple voids any waranty.

HT204380 I am new to Facetime. I want to be able to talk to my iMac from my Macbook. When I try to connect via email I get a message that says the person being called "is not available for Face Time".

I am new to Facetime. I want to be able to talk to my iMac from my Macbook. When I try to connect via email I get a message that says the person being called "is not available for Face Time".

Hi PhiDor,
Thanks for visiting Apple Support Communities.
See this article for some information that can help:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Regards,
Jeremy

Shaking image on external monitor when Satellite A200 is running on AC

Hello
I have this problem which is driving me crazy .... I bought an external monitor for my Toshiba Satellite A200-1s9 laptop but the problem with it is that the image, on the external monitor, is shaking. I tried another monitor, the same, another cable, same problem; the only way how to stop it is to unplug the AC from the laptop.
I also tried to move the monitor further from the laptop but nothing.
I can making stop shaking so hard only if I switch to the AC profile from FULL POWER to Save power ... but even with this the image is still shaking a bit.
So basically there is a magnetic field around there, probably in the laptop, which is making my image shaking like crazy ... does anybody know how to stop it?
tx

Hi,
hmmm...
I don't think that this has to do something with magnetic fields.
Cause it is related to the power consumption of the computer, it seems that there is a problem with the AC-Adaptor.
If it has to deliver much 'juice', it's condensators to keep the voltage absolutely stable are perhaps too weak.
Such instabilities ( which have the 50 Hz frequency of the power supply ) can disturb the signal to the monitor.
A solution for that ? ..if you know how to solder some fat condensators somehow in between...
Or:
It's a grounding problem
I never heard from such problems with LCD-Monitors (VGA out??). Mostly this is the case when you you use analog video out,
leading to no color on the TV.
Do you have an annoying buzzing when you connect audio out to an amplifier ? That would be a sign for that.
I had such a problem and solved it by plugging my laptop on AC on another circuit in the house than my audio devices
So experiment with that.
First: disconnect all other stuff ( printer, sticks, antennas, everything ) These are nasty problems with lots of possible interferences.
Let me know!
Greets Matz

How can I turn off sound controll whele on the Satellite A200

How can I turn off the external sound controll in front of laptop - the wheel? It does not work, sound volume is permanently muted.
OS: MS Windows XP
Thanks

Thank you Jaba,
it is Toshiba Satellite A200 Series. Drivers, its configuration and configuration of operating system is OK. The wheel is mechanical damaged, so that is the point. I have to disable its function in operating system. But where can I disable it? I have tried to uninstall Toshiba utilities (controls, hotkeys), reinstall drivers. I have tried to find an option in BIOS, there was no one.
btw: I am a linux administrator, but I have advanced knowledge of windows systems so you can be short.

Satellite A200-1T8: Cannot enable HDMI

Hi
I have install hdmi on my laptop Satellite A200-1T8 with Win 7 32BIT and any time i open it, it tell's me 'you must enable hdmi '
If i go to hdmi control, the enable is there but i can't click to make it enable.
Can some please tell me what to do, to enable it .
thank to you all

Hello
> and any time i open it,
What do you open exactly?
For me it sounds like that you have disabled HDMI in BIOS as Paolo30 wrote. Check the BIOS and enable HDMI.
Furthermore if you have installed Windows 7 32bit that was not delieved with your notebook make sure that display driver from official Toshiba page is installed.

When iPhone 5s is connected via USB no audio is heard

Hi There -
I've seen older threads on this issue but I don't think I've really come across any solutions. My issue started yesterday; now before reading further I have to ask that you please keep in mind that I did perform the latest upgrade on my iPhone a bit earlier in the day.
When I connect my iPhone to my vehicle sync system and announce that I'd like to connect via USB, the voice recognition repeats my request and then the music on my iPhone shows to be playing on the display in my vehicle. The problem is that though the music appears to be playing and the minutes played are being displayed there is no audio coming through. When I switch to the Bluetooth Audio option all sound comes through.
Now, as a 2nd test, we connected my sons iPhone 5s via USB (he has not taken the latest update on his iPhone) and the same issue happens with his. Voice recognition changes to the USB format as requested, music appears to be playing but no audio is heard. When we change his phone to Bluetooth Audio the audio comes through nice and clear.
I'm not entirely convinced the update caused the issue so I wanted to put this out there to see if anyone has run into this and were able to actually resolve the issue.
I know the USB cable is working fine because when I do plug it into either phone the phone makes the little connection sound and pops up a brief battery percentage box. I also know the cable is working because when we announce USB as our audio of choice the system recognize USB via the iPhone.
One other thing I tried looking for was the option on the phone to switch from Docked to Synch - I know on my iPhone 4 I was able to switch back and forth through iTunes and would also have the option if I tried to watch anything via You Tube when connected to the dock; I cannot find this anywhere on the 5s when connected via USB.
Help is greatly appreciated!!!

I have had similar troubles with wifi.. some improvement removing BlackBerry desktop software & drivers & reinstalling after reboot... I used the same installer I had previously, but a fresh downloaded installer couldn't hurt...
10.3.1 SW .1779 OS .2726 WLAN .1.1 Radio .2727

Online conference participants hear echo when cinema display is connected via mini-displayport, even though I am using headphones with mic.

When I use Google Hangout or GoToMeeting, other participants in the meeting hear an echo of their sound -- loud and obtrusive. When I mute, it goes away.
This only happens when I am using my Apple Cinema Display 27" (recent vintage) connected via the mini-displayport (natively, not an adapter).
On my end, i don't hear their echo, but I do hear waves of squelching -- basically it sounds like their end is trying to adjust their input down to account for what it thinks I saying, even though I'm not talking, it's just the echo making that happen.
Sometimes this doesn't occur -- it seems to crop up intermittently, but happens around 75% of the time at some point in a conversation.
I am using iPhone-compatible in-ear earphones with built-in mic; the earphones are the rubber seal type, so there's no sound escaping them that the system should even be able to hear.
I have my audio set up for "Headphones" as output device.
Input device is set up as "External Microphone" -- this part confuses me because even though I know my Cinema Display has a microphone, the OS seems not to list it as a separate input device. So I wonder if it's getting confused trying to use both the cinema display's mic *and* the earphone mic? (see dropdown image)
OS version 10.20.2; Macbook Air 13 inch, "early 2014" and Apple LED Cinema Display 27inch
Earphones are skull-candy brand iPhone compatible (with built-in mic), plugged into the macbook air's earphone jack. (without the display connected, this has always worked fine -- and with a prior non-apple display that had no mic/camera this was not a problem)
This is an ongoing issue in our office, in fact ... especially troublesome in client meetings.
I haven't tried other configurations, other than when using the Cinema Display's USB connector, the same thing happens.
It also happens even when I'm not using the "USB PnP Sound Device" you see listed in the dropdown here -- that's something I use for controlling music output to my desk speakers.
A general question: is there no way to control the cinema display's mic and/or camera more directly?
(EDITED TO ADD: Ok I see in the Cinema Display manual, there should be a listing for "Display Audio" in the input list, but my SysPref panel has none listed. See other screenshot. I wonder if this is the problem??)

Curious, is the 30-inch Cinema Display you have, one listed in this Support Article:
•Apple Cinema Display (20-, 23-, and 30-inch DVI) - Technical Specifications
or is yours a later build series; which one do you have...? This says Mini unsupported.
The specifications vary across the line of Displays, as do the graphic support in Macs.
I'd suspect your version is a later 30-inch display, but it may be one of these. And a
newer 27-inch Display has the Thunderbolt cable.
In any event...
Good luck & happy computing!

Setting up new imac on network using dhcp nut not getting a valid ip address. Same happens when I try to connect via wi-fi. IP address being assigned is 10.45.190.195

Have new Imac that I'm setting up. Company is using DHCP to manage IP addresses. Mac is plugged into netgear hub along with a PC. Mac is getting an invalid IP address of 10.45.190.195. PC is working fine. I've powered the hub on and off. I've renewed th DHCP lease on the Mac many times but IP address always comes back as 10.45.190.195. I've plugged the network cable directly in the network port bypassing the hub. Same result.
Having the same issue when trying to connect via Wi-Fi,
Anyone experiencing this issue?

I see what you are saying. When I lived in the dorms, I was set up in bridge mode because we had that type of modem. My question now is do I distribute a range of static IP's or share a public? Either of these settings give me errors where the starting and ending DHCP addresses conflict. I use 10.0.1.1 and 10.0.1.100 and this error no longer seems to persist, but then I am not able to connect to the internet and the amber light keeps flashing- along with my computer showing that I am still connected to the TM.
Thank you for your support so far.

Help with sound to LCD TV when using HDMI

I would love any assistance with a problem I am having. I have a new mac mini with a 40" Proscan LCD. I am using a mini-DVI to HDMI adapter and am getting great video - 1080. My issue is that via Keynote I need to get sound to the LCD TV. It is coming through the mini speaker - what do I need to do to get the sound over to the TV? Any assistance would be appreciated!

Welcome to the Apple Discussions!
The user guide which came with your TV should cover the issue in the different connections available for your unit.
DVI is video only. HDMI is audio and video. If you are using an adapter to connect DVI to HDMI there is no audio because of this. So to connect a Mac mini with a DVI to HDMI adapter you will also need an audio cable to run the audio from the mini's audio outport to an audio inport on the TV. This is why I refer you to the user guide for your unit, because it should point out the correct port to use on the TV, as well as point out if you have options for using analog or digital audio. The mini's audio ports can do both.

Why do i not get sound on my tv when I'm linked with an hdmi cord from apple

I purchased an HDMI cord from apple and was told I would get sound thru my TV.
No sound from tv, only from my computer

Starting pretty much the same time as when the thunderbolt came out, if my memory serves me correctly, it should support sound output as well as video. However your adapter you choose to use also plays a part in this. It has to support sound output, and most of the time you have to choose it as a soud output in the system preferences under the sound section. But if you could go to the apple logo and click about this mac and give us more info on your computer we can assist you better .

Sound won't work when my MacBook is connected to my TV via HDMI

I have my MacBook connected to my HDTV via mini DVI to HDMI and the picture is perfect, but I cannot make the sound work. I've tried going to sound under system preferences but my tv is not listed as a device. Do you know how I can make the sound work?

You need an audio cable to connect your Mac's audio out port to your TV's audio in port. The minidisplayport does not send sound.

Satellite A200: How connect a parallel port printer?

Probably a very silly question, but would like to connect A200 series laptop to a parallel port printer that does not have a USB port... what is the best option?

Hi
You ask for the best way?
Well, you have got only one way?
You need an USB to parallel adapter. Check in the google for some offers.
I searched in the google and found some good options.
Maybe this could be a good choice;
http://www.ramelectronics.net/html/usb_printer_cable.htm#UP6C
Best regards

No sound on LCD TV when Satellite A200 is connected via HDMI

Similar Messages

Maybe you are looking for