No sound on my amd

so i got this new mobo and cpu and i cant get my sound blasver li've to work.
i have disabled the on board sound from bios.
amd 64-bit 3200+ socket 939
52 DDR 400
Sound blaster li've 5.
Message Edited by NoXNF on -2-2004 0:3 PM

NoXNF,
What OS are you using? If you are using XP /2000 then try using the Li'veDrvUni pack.
Go to the driver download page and do a search for this filename - Li'veDrvUni-Pack(ENG).exe
Jason

Similar Messages

Trouble running DVI video and HDMI audio out of 6950

Twin frozr iii 6950 2gb (X2 crossfire)
Asus VG236 Monitor
Windows 7
MSI P67A-G43 Motherboard
Yamaha RX-V371 Receiver
I have two Twin Frozr iii 2gb 6950 cards and am attempting to use the HDMI on the video card solely for 5.1 audio out to my receiver while using video through the DVI jack of the same card directly to my monitor without success.
-Audio functions if I run the HDMI from the card into my receiver, then out to my Asus VG236 monitor.
-Audio functions when I run from the card to my receiver then out to my plasma tv.
-Audio functions if I have the DVI run directly to the Asus VG236 monitor and HDMI to the receiver then plasma tv (only in dual display and the tv must be on for audio to function this way. If I turn the tv off even though the receiver is still on the audio stops working and windows sound lists the 'AMD HDMI Output' as not plugged in).
-Audio even fuctions when I run DVI to the monitor and HDMI to the receiver, then out to the HDMI port on the same monitor but the monitor will only run at 60hz this way even when DVI is selected on the monitor, as though it defaults to the HDMI when dvi and hdmi are both plugged into the monitor.
And if i run the hdmi to the receiver "HDMI IN" port without using the "HDMI OUT" port from the receiver to anything, like my tv or monitor, the sound doesn't work and in windows sound the "AMD HDMI Output" is listed as "not plugged in" .
I purchased this monitor for the true 120hz capabilities, the HDMI on this monitor doesn't support 120hz, the maximum is 60hz. DVI is required to run at 120hz. I don't see any option in windows sound settings or CCC to resolve this.
I have also tried disabling onboard audio in BIOS with no effect.
For now i'm running the audio out my MOBO jack through an optical cable to the receiver but optical only supports 2.1 sound.
Any suggestions you can offer would be appreciated, thank you

bump,
Anybody?

Siri problems since upgrading to iOS 7

What is with Siri? Since upgrading my iPhone 5 to iOS 7, there are long periods during the day and evening where reponse is either deadingly slow, or where I get an error message back saying they cannot take requests now.
This never ever happened with iOS 6.
And I'm on a high-speed network.
Is it just me, or are there Siri problems in iOS 7, or is Apple just inundated with a lot of new Siri requests since the new iPhones were released and can't cope with the load?
It's become unreliable to use for dictation on the iPhone.
Thanks,
doug

Add me to the list, Doug.
Since updating to iOS 7, Siri takes way too long (easily 15 seconds+) before providing a response if it hasn't aborted with "cannot take requests". ****, even having it set a timer and resume my audiobook, both not requiring the internet, takes time.
Lastly, on a purely personal note, the new Siri voice drives me nuts. Its pitch is too fast making it sound mousy, hurried, amd un-natural.

Catalyst control center stopped working

HP Pavilion HPE h8-1287c
Video card Radeon HD 7450
Windows 7 64-bit
Error message "Catalyst Control Center stopped working......."
Two monitors connected, HPw2408h and TV. HP monitor is connected using DVI and the TV using HDMI.
The issue is that when the pc starts things run fine. WhenI want to have the sound to the TV I switch the Sound Playback to AMD HDMI Output and the TV now has the sound. After a while I will get an error message "Catalyst Control Center stopped working.......". When Sound Playback is opened the AMD HDMI Output is no longer working and has a red arrow pointing down and it indicates the AMD HDMI Output is "not plugged in".
I have download the latest drivers and still have the same results.
What is needed to correct the issue?

Hello insco6750,
When you updated the drivers did you install over top of existing software or uninstall beforehand?
First we should try ripping everything ATI off of the system, including software, drivers and CCC. You should be able to uninstall everything through Add/remove programs.
After you remove everything reboot and let windows reinstall it's own drivers and software. You don't need CCC to do dual monitors so we can do testing without it.
Once you let windows install see if your HDMI output no longer works when you switch to the TV.
Post back your results after completing this.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

MX 440 VT8X (MS-8891) Gray Screen

Every time in install the drivers for the MX440 8X (128mb) on my Win ME system I end up with a solid grey screen and a blinking curser. I have to reboot the machine, go to safe mode and change the drivers to standard vga to get back in.
System configuration is below.
Here's what I've done so far:
-- Out of the box standard installation -- grey screen
-- Enabled / disabled 8x AGP support on MB -- grey screen
-- Downloaded and installed several versions of drivers:
closest model number I could find was MS-8888 (mine is MS-8891 -- at least that looks like my card) . I started with the standard driver (v 31.00) that comes with the card -- grey screen. I downloaded both newer versions (40.74 and 41.07) installed and tried both with the same results.
-- Using the Live Update 2 software I was able to download and updated the Bios too -- still grey screen
Note: I have the 64m / 4x AGP version of this card in another system and it works very well. I haven't had a chance to pull it out and test it in this system yet. But I'd like to take advantage of the 8x AGP on the MB and new vid card.
Any and all advice welcome.
Thanks!
Configuration (new install - new system):
OS: Win ME
Motherboard: ASUS A7N8X Delx
-- Bios set to AGP 8X (tested both 8x and 4x)
-- Both Network adapters are configured
-- Onboard sound enabled
CPU: AMD Athlon XP 2400+ (standard - not overclocked)
Video Card: MX440-VT8X (MS-8891 -Red card / gold fan)
Memory: 1024 DDR 2400 Samsung
HardDrive: WD 1200 (7200, 8mg)
I/O: 1394 and USB enabled
Case: 400w ATX formfactor

combined watt
amps 3 main voltages
all of psu label

I have a HP Pavillion all-in-one with AMD processor running Windows 8.1 64 bit. Flash Player 16.0.0.235 with all current drivers. I'm consistantly experiencing a green sceen on all Flash Player videos but I have sound.

I have a HP Pavillion all-in-one with AMD processor running Windows 8.1 64 bit. Flash Player 16.0.0.235 with all current drivers. I'm consistantly experiencing a green sceen on all Flash Player videos but I have sound.

[discussion moved to Using Flash Player forum]

[solved] No sound and AMD-Vi: Event logged

Hello,
Today I started to migrate my HTPC from openElec to Arch Linux since several things started to annoy me.
For now, I have made a fresh install and installed XBMC but I can't get audio. It is a AMD setup and has an Asus Xonar XD PCIe card installed. Integrated HD Audio is disabled.
The user xbmc is in the audio group and when I ssh into the HTPC and try to play a file with aplay I get tons of these on the TV:
[ 46.215678] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0000 address=0x0000000000100000 flags=0x0050]
Channels are unmuted and I priorized the output with the following alsa-base.conf:
options snd slots=snd_virtuoso
options snd_virtuoso index=0
Alsamixer shows the desired sound card as default.
xbmc@xbmc ~ % LANG= aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: DX [Xonar DX], device 0: Multichannel [Multichannel]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: DX [Xonar DX], device 1: Digital [Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
xbmc@xbmc ~ % aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=DX
Xonar DX, Multichannel
Default Audio Device
sysdefault:CARD=DX
Xonar DX, Multichannel
Default Audio Device
front:CARD=DX,DEV=0
Xonar DX, Multichannel
Front speakers
surround40:CARD=DX,DEV=0
Xonar DX, Multichannel
4.0 Surround output to Front and Rear speakers
surround41:CARD=DX,DEV=0
Xonar DX, Multichannel
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=DX,DEV=0
Xonar DX, Multichannel
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=DX,DEV=0
Xonar DX, Multichannel
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=DX,DEV=0
Xonar DX, Multichannel
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=DX,DEV=0
Xonar DX, Multichannel
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=HDMI,DEV=0
HDA ATI HDMI, HDMI 0
HDMI Audio Output
Setting iommu=pt as suggested here did not do any trick...
Does anyone here have a hint of what can be wrong?
Maybe this is interesting, too. The device, the AMD-Vi-Event refers to, is the mentioned sound card.
xbmc@xbmc ~ % lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7480D]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03)
00:10.1 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5
01:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)
02:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio]
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 06)
Last edited by And1G (2013-08-20 13:43:11)

Can't anyone help on this one? I just checked with a Fedora 19 Live image (Kernel 3.9.5) and I get the same error messages in dmesg as in this Arch installation, also no audio.
I believe the problem here might not be directly audio related, but where could I search for the cause?
Also, I don't really think it's a hardware failure since audio is working nice with openElec (using Kernel 3.10, if I remember that right)...
Edit: So I've set up openELEC to boot (over PXE, so I don't have to reinstall everything) and sound is working out of the box. Here is some data for comparison to the above statements from the Arch system:
xbmc:~ # cat /proc/cmdline
root=/dev/ram0 rdinit=/init BOOT_IMAGE=openelec/KERNEL ip=dhcp boot=NFS=192.168.178.20:/srv/nfs/openelec disk=NFS=192.168.178.20:/srv/nfs/openelec overlay
xbmc:~ # uname -r
3.10.5
xbmc:~ # lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
00:00.2 IOMMU: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 9993
00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device 9902
00:02.0 PCI bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:10.0 USB controller: Advanced Micro Devices [AMD] Hudson USB XHCI Controller (rev 03)
00:10.1 USB controller: Advanced Micro Devices [AMD] Hudson USB XHCI Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 14)
00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 5
01:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)
02:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio]
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
xbmc:~ # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: DX [Xonar DX], device 0: Multichannel [Multichannel]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: DX [Xonar DX], device 1: Digital [Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Generic [HD-Audio Generic], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Generic [HD-Audio Generic], device 1: ALC887-VD Digital [ALC887-VD Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
xbmc:~ # aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=DX
Xonar DX, Multichannel
Default Audio Device
sysdefault:CARD=DX
Xonar DX, Multichannel
Default Audio Device
front:CARD=DX,DEV=0
Xonar DX, Multichannel
Front speakers
surround40:CARD=DX,DEV=0
Xonar DX, Multichannel
4.0 Surround output to Front and Rear speakers
surround41:CARD=DX,DEV=0
Xonar DX, Multichannel
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=DX,DEV=0
Xonar DX, Multichannel
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=DX,DEV=0
Xonar DX, Multichannel
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=DX,DEV=0
Xonar DX, Multichannel
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=DX,DEV=0
Xonar DX, Multichannel
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=HDMI,DEV=0
HDA ATI HDMI, HDMI 0
HDMI Audio Output
default:CARD=Generic
HD-Audio Generic, ALC887-VD Analog
Default Audio Device
sysdefault:CARD=Generic
HD-Audio Generic, ALC887-VD Analog
Default Audio Device
front:CARD=Generic,DEV=0
HD-Audio Generic, ALC887-VD Analog
Front speakers
surround40:CARD=Generic,DEV=0
HD-Audio Generic, ALC887-VD Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic,DEV=0
HD-Audio Generic, ALC887-VD Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic,DEV=0
HD-Audio Generic, ALC887-VD Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic,DEV=0
HD-Audio Generic, ALC887-VD Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic,DEV=0
HD-Audio Generic, ALC887-VD Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Generic,DEV=0
HD-Audio Generic, ALC887-VD Digital
IEC958 (S/PDIF) Digital Audio Output
Not a single one of these AMD-Vi Events is in the dmesg output.
Does anyone have a clue on how I could figure out if they installed uncommon patches or use weird parameters to get all this running?
Edit #2:
So I've searched through some of these odd IOMMU options and found this: https://www.kernel.org/doc/Documentatio … ptions.txt
I tried iommu=soft as a kernel parameter and I get audio output and the AMD-Vi Events are no longer present. But can anyone explain to me what exactly I have done here? Using a "software bounce buffering" seems weird to me if I have some hardware present, that can do such things (The IOMMU, I assume)...
Since this really does not look like only audio-related problem, can someone perhaps move the thread to the right place. Although I'm not quite sure which this will be.
Last edited by And1G (2013-08-19 22:12:20)

[solved] No sound with AMD Fusion C-60

I have a freshly-installed headless server with a Fusion C-60 APU (http://www.newegg.com/Product/Product.a … 6813131843). It's mostly a NAS box, but I'm also trying to set it up to run MPD. However, I apparently have no sound at all:
sir ~ # aplay -l
aplay: device_list:268: no soundcards found...
Is the C-60 just too new to be supported? Do I need to be running a GUI of some sort to make the audio work?
sir ~ # lsmod
Module Size Used by
acpi_cpufreq 10470 0
mperf 1267 1 acpi_cpufreq
kvm_amd 51746 0
kvm 388889 1 kvm_amd
eeepc_wmi 4552 0
asus_wmi 15520 1 eeepc_wmi
sparse_keymap 3114 1 asus_wmi
rfkill 15633 1 asus_wmi
video 11170 1 asus_wmi
pci_hotplug 22930 1 asus_wmi
evdev 9912 2
microcode 14196 0
psmouse 76297 0
pcspkr 2027 0
serio_raw 5041 0
radeon 896820 1
r8169 56439 0
mii 4059 1 r8169
k10temp 3050 0
sp5100_tco 5784 0
i2c_piix4 10311 0
ttm 64499 1 radeon
drm_kms_helper 35090 1 radeon
drm 223795 3 ttm,drm_kms_helper,radeon
i2c_algo_bit 5391 1 radeon
processor 27239 3 acpi_cpufreq
i2c_core 22774 5 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon
wmi 8379 1 asus_wmi
button 4701 0
ext4 471524 2
crc16 1359 1 ext4
jbd2 77224 1 ext4
mbcache 5930 1 ext4
sd_mod 30818 4
ahci 22096 2
libahci 20503 1 ahci
libata 168037 2 ahci,libahci
ohci_hcd 26544 0
ehci_pci 4120 0
ehci_hcd 47407 1 ehci_pci
usbcore 173007 3 ohci_hcd,ehci_hcd,ehci_pci
scsi_mod 129231 2 libata,sd_mod
usb_common 954 1 usbcore
sir ~ # lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Wrestler [Radeon HD 6290]
00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 09)
sir ~ # uname -a
Linux sir 3.8.8-2-ARCH #1 SMP PREEMPT Tue Apr 23 10:28:14 CEST 2013 x86_64 GNU/Linux
Last edited by rabidfurby (2013-05-10 16:22:46)

Thanks, apparently it was disabled in the BIOS. Never thought to check there because I've never had a motherboard ship with sound disabled by default.

DEAR FRIEND..PLEASE GIVE ME COMPAQ PRESARIO V3500 MODEL V3751AU AMD PROCESSOR AUDIO AND SOUND DRIV

DEAR FRIEND..PLEASE GIVE ME COMPAQ PRESARIO V3500 MODEL V3751AU AMD PROCESSOR AUDIO AND SOUND DRIVER

Hi,
This is all supported derivers from HP:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3413040&lang=en&cc=us...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

High pitch hissing sound from 970A-G46 motherboard with AMD FX 8 core processor

I am getting high pitch hissing sound from 970A-G46 motherboard with AMD FX 8 core processor.
Sound is coming from some place near CPU area.
I tried changing Core C 6 State in BIOS from Enabled to Disabled to fix this issue.
I also followed steps in following link, w w w . tomshardware.com/forum/292915-30-high-pitched-noise-coming-area
No luck with above changes.
I heard this is a common problem with MSI motherboards. Is there any fix for this issue.

Quote from: flobelix on 12-January-13, 18:49:48
That is surely no typical problem of MSI mainboards. In fact that is very rare if it is the board.
Tke the board out of case on a non conductive surface with nothing else connected but but mainboard, ram, psu, cpu and vga. Try it again after clearing CMOS (>>Clear CMOS Guide<<)
If you are then 100% sure that it is the board this could be a defect as MSI mainbaords normally don't cause coil whine and I haven't heard that about 970A-G46 so far
I tried clearing CMOS by replacing jumper and loading factory defaults. Still high pitch sound is coming intermittently. As my 30 day period is over with Frys Electronics, How easy to get a replacement board from MSI. Does anyone know the steps?

Usb sound interface - AMD processor - win7 noise problem

I use m-audio mobilepre usb as the external sound interface. I got the noise(crackles) problem when I was using win XP and vista but HP USB filter patch solved the prblem.
Now I use win7 but usb filter doesn't work at the same problem. I checked all USB ports and one of them -sometimes- works properly. But it's not an exact solution and I don't want to re-use WinXp etc. There are many people crying about the same problem. In different forums I saw problem was related with IRQ, hubs etc. but I don't know how to configurate. Do you have any idea? Thanks...

I am one person who has been posting about and investigating this problem with various usb1.1 audio interfaces. I believe the mobilePre is usb 1.1 rather than usb2.0, but I may be wrong.
I have been in touch with m-audio about my Fast Track device and this issue and they say they have raised it as a bug with AMD who are responsible for the chipset in my machine as well as the processor. I can only assume that this means that they, m-audio, are seeing the same problem.
I can record and play cleanly if I insert an external usb2.0 hub, with or without external power and also disable the wi-fi on the machine.
There are free Microsoft applications that allow you to log and see the commands being sent via usb, and here they clearly show usb problems that only occur under Windows 7. I can post about these tests if they will help, but they do involve some nerdiness and hard work getting them to work. Alternatively, I am still trying to get anyone to respond after trying my simple test of setting up the usb device to play using asio drivers, open Windows 7 Control Panel audio device manager and switch between the recording and replay tab. This should not affect the asio usb audio at all. Does this alter the crackling?

Sound Card and Wifi device Not working - Compaq Presario CQ60 -109EM AMD Sempron

I need a driver for my new note book Compaq Presario CQ60 109EM for Windows XP sp2 operating system.
It was on Vista Home Basic. I hated it because it made the computer ran very slow, i downgraded to XP Sp2
by myself, but now i am getting issues with all drivers. Everything is not working, the worse one is the sound
card and wifi device are not working event not detected by xp. Please help me.

grr i have the same problem, my laptop is the same model as urs. Go to Nvidia.com for the graphics card driver, the graphics card for our laptops is the nvidia geforce 8200 m card, just search it into the download section (it will ask you to). I cant get the internet working but im usin a usb modem. The webcam can be activated by going to the start menu and right clicking my computer and going to the manage option from here go to the device manager.
Go to the yellow section and it will say other devices it will say hp webcam now download a youcam driver or whatever and right click on the hp webcam
and select update driver click on this time only and select download from a spesific location and select the webcam driver it will hopefully work and be removed from the yellow section. now using a webcam veiwer you can use it. Thats all i know so far but i really would like to get my sound working mainly because on xp on this laptop it is pretty powerful for games as i can run crysis at medium settings at an exeptional level but obviously, NO SOUND GRR.....

MSI MEGA 180 AMD Deluxe - NO SOUND!!

Hi there, can anyone help with this problem!?!?!?!?
My onboard sound has stopped working! I switched my machine off before I went to work, came home, switched it back on ond no sound!!!!
Specs as below!

Thanks for the tips, tried all suggestions, but they didnt work.
Got it working in the end though, took out my Pixel View Pro tuner card and it all worked fine!
Not sure why this is? Any suggestions would be great, as I dont want to have to buy the MSI card as the one I have is great!
Many thanks in advance!

No Hdmi output on Amd 8570 (video AND sound)

Hello!
I've been having problems connecting monitors with HDMI cables to my destktop pc ( HP pavillion 500-089 ). everthing works fine for a couple of weeks than the display stops working, only display's a check signal cable message. The screen will work with other computers, gaming systems or bluray players. It's really frustrating because i only have 2 video outputs on the graphics card ( vga+hdmi ) and the VGA is used for a wacom cintiq tablet. I've sent it back to hp several times, they switched the video card on the first try but after that they would only send it back, stating there was no issues found... This has happened on 2 monitors, a samsung s24c350hl LED and a hitachi 720p ( which model code i can't remember.)
Please help!!

Hello Zackdesrochers,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are experiencing issues with your HDMI cutting out after working for a couple weeks on your HP Pavilion 500-089 Desktop PC. I would be happy to assist you, but first I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this I can provide you with accurate information.
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Given you have sent it in a couple times and nothing can be found that is wrong I am assuming it is software related and require this information to assist you with the issue.
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Loss of Sound

hey everybody,
My desktop has lost all sound output. today I was trying to fix this, reconfiguring alsa, uninstalling and reinstalling it and setting everything up again. still no sound.
shutdown the comp, made sure the cables still hooked up on the inside (I had just put in a new fanless heatsink on my vid card last week). everything is fine.
I booted up with a live cd, first tried fedora13...only to have fedora barf and not load the live environment.
then booted from crunchbang 10a2, which worked fine. still no sound here, either.
could this be caused by anything else, or is my on-board sound just dead?
is there anything else to troubleshoot?
here's what I've got :
[b]$ ls -l /sys/module/snd/holders[/b]
total 0
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_ac97_codec -> ../../snd_ac97_codec/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 [b]snd_intel8x0 -> ../../snd_intel8x0/[/b]
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_mixer_oss -> ../../snd_mixer_oss/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_mpu401 -> ../../snd_mpu401/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_mpu401_uart -> ../../snd_mpu401_uart/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_pcm -> ../../snd_pcm/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_pcm_oss -> ../../snd_pcm_oss/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_rawmidi -> ../../snd_rawmidi/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_seq -> ../../snd_seq/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_seq_device -> ../../snd_seq_device/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_seq_oss -> ../../snd_seq_oss/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_timer -> ../../snd_timer/
this one i'm not sure about. should it be at the top?
[b]$ lsmod|grep '^snd' | column -t[/b]
snd_seq_dummy 1447 0
snd_seq_oss 28928 0
snd_seq_midi_event 5420 1 snd_seq_oss
snd_seq 50530 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_mpu401 5376 0
snd_mpu401_uart 5931 1 snd_mpu401
snd_rawmidi 19235 1 snd_mpu401_uart
snd_pcm_oss 39096 0
snd_seq_device 5241 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
snd_mixer_oss 16932 1 snd_pcm_oss
[b]snd_intel8x0 26839[/b] 0
snd_ac97_codec 110525 [b]1 snd_intel8x0[/b]
snd_pcm 71653 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 19660 2 snd_seq,snd_pcm
snd 57225 12 snd_seq_oss,snd_seq,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_pcm_oss,snd_seq_device,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 7201 2 snd_intel8x0,snd_pcm
[b]$ ls -l /dev/snd[/b]
total 0
crw-rw----+ 1 root audio 116, 4 Jul 9 20:14 controlC1
crw-rw----+ 1 root audio 116, 3 Jul 9 20:14 midiC1D0
crw-rw----+ 1 root audio 116, 5 Jul 9 20:14 seq
crw-rw----+ 1 root audio 116, 2 Jul 9 20:14 timer
[b]$ lspci[/b]
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV41.1 [GeForce 6800] (rev a2)
05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
THis is also weird...sometimes this will work, and sometimes it won't. when I say sometimes I mean as I've been fidling around with settings. but even when it worked a while ago I still had no sound.
[b]$ alsamixer[/b]
cannot open mixer: No such file or directory
Right now, alsamixer opens normally. (after a reboot)
/etc/rc.conf excerpt:
MODULES=(!usblp !acpi-cpufreq !snd_intel8x0m vboxdrv vboxnetflt !snd-pcsp snd_i$
/etc/modprobe.d/modprobe.conf
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
options snd-intel8x0 ac97_quirk=1
#NVidia CK804 Chip: Realtek ALC850 rev 0
options snd-pcsp index=2
thanks!

windscape wrote:
Hi jamba,
I think the issue is that your output of lspci shows no Audio device. Perhaps it got disabled in the BIOS? dmesg output may indicate something else afoot with your audio hardware.
Hope that helps.
I'll check out dmesg output. also still need to check if something got disabled in the BIOS.
!snd_intel8x0m <- is your problem. Your sound module got blacklisted so un-list it. Modprobe it then try sound again or just reboot and it should work.
moonswan. snd_intel8x0 is the sound card (I think), in the alsa wiki it said it was recommended to blacklist snd_intel8x0m as a quirk fix.
No sound with or without it blacklisted still :-(
thanks

No sound on my amd

Similar Messages

Maybe you are looking for