No sound on my G580 Notebook after upgrading to win 8.1

SInce upgrading to Win 8.1 on my 64bit Lenovo G580 notebook I kept receiving a message about Dolby driver problems (my sound did work though). Then I thought I would get rid of this message - update Dolby drivers - and followed advice on the internet. As I remember, this advice told me to uninstall all sound / dolby drivers and then install new drivers.
In doing this I somehow also uninstalled Dolby PCEE4 drivers for my G580.
I subsequently installed the latest G580 conexant drivers but with no success. I can "see" that the drivers are working (when I click on the sound icon bottom right of the desktop), but there is no sound. Other internet advice has been to obtain PCEE4 drivers - but I don't find any files from Lenovo to download.
I've tried to reload Dolby Advanced Audio V2, but it ends prematurely with the prior message that PCEE needs to be installed.
Can someone please assist?

http://support.lenovo.com/gb/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g580-no...
are you sure its not the realtek drivers as some have said its in there
Thx dave
yoga 2, lenovo b540
3 custom gaming pc systems

Similar Messages

HP Compaq CQ60-215dx: sound will not switch to headphones after upgrade to Win Vista 64bit Ultimate

HP Compaq CQ60-215dx: sound will not switch to headphones after upgrade to Win Vista 64bit Ultimate
what can I do?

Uninstall the current audio driver and install it again.
other option is trying driver from microsoft update.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer working

After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer recognizing discs. When I first put a disc in the drive runs for a bit and then stops. I've tried updating the driver but it says it has the most current driver. Under manage, it does not show any error codes and it says it is working correctly. I've looked at the regedit and it does not have any of upper and lower filters. I've tried disabling, rebooting, and reenabling. What am I missing? Another issue I've had since upgrading is that my network adapter needs reset several times a day in order to remain connected to wifi.

Hey hvbnfrgvn,
Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
I hope this information helps, please keep me posted on how it goes.
Best of luck and have a great day!
I worked on behalf of HP.

System recovery fails after upgrade to Win 8.1 on Satellite L75D-A7283

My elderly uncle forgot the password to his Win 8 user account sometime after upgrading to Win 8.1. He was the administrator, we haven't been able to get Microsoft to reset the account, so I thought to roll back the computer to its factory installation of Win 8.
However, when I try to do that, I get as far as the Reset your PC screen and find that the only target OS is Win 8.1, not the original Win 8. Ok, I accept that. But after choosing to restore Win 8.1, it says "Unable to reset your PC. A required drive partition is missing."
I have examined the disk by removing it and attaching it to another computer and find that both the original Win 8 recovery partition and the new Win 8.1 GPT recovery partition are both there. They just don't seem to be accessible.
It seems that the Win 8.1 upgrade has made the original factory recovery partition inaccessible, which is not particularly helpful. We have no recovery disks to work from, so I think my only recourse is to try to get a Win 8 factory recovery disk from Toshiba, but I wondered if anyone else has a suggestion? Thanks.

Satellite L75D-A7283
It's my understanding the upgrade does not modify any other partitions while upgrading Windows itself. Seems likely something else is wrong.
If you did not create recovery media before and cannot do so now, then obtain it from Toshiba. Scroll down to Get Recovery Media here.
All the information in the section Recovering the Internal Storage Drive, which begins on p. 53 of the User's Guide, should still be applicable.
Satellite/Satellite Pro L40/L50/L70/S40/S50/S70 - A Series User’s Guide
-Jerry

After upgrade to Win 8, the key's has changed

After upgrade to Win 8, the key's has changed, for example, when i am trying type @ but the key has changed as ". so please help me to rectify the problem.

Hi,
What was the keyboard language BEFORE and what it is NOW ? Did you use SAME KB language for both Windows 7 and Windows 8 ? When click to the KB (bottom right corner) what do you see ? This is mine:
Please use instructions from the following link to fix:
http://windows.microsoft.com/en-AU/windows-vista/Change-your-keyboard-layout
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Icloud stopped after upgrading to win 8

icloud stopped working after upgrading to win 8.
Says "map cannot be found".
Any suggestions? Or will it simply not work with Win 8?

Solved.
Needed upgrade to 2.1

No Bluetooh Driver after upgrade to Win 8.1- HP Pavilion TS 11 Notebook PC

Hello,
I need help.
When I bought this laptop it came with Win 8.0 and everything worked fine. But after the upgrade to win 8.1, the bluetooh crashed, and since there its not recognized.
I tried everythig even try to install the drive to win 8.0 but did not work ...
What should I do?
thank you

Thanks paulovpinto. I do not see Bluetooth drivers available for Windows 8.1 for your computer.
HP Pavilion TouchSmart 11-e000sp Notebook PC Drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5396...
This thread has a possible solution, albeit complicated if you are using Ralink Bluetooth in Windows 8.1. See mpw101's post here.
Re: HP Support Assistant - Ralink August 2013 Update:
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/HP-Support-Asistant-Ralink-...
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

The synth pad sound Warm Pad has changed after upgrading from Logic Express 7 to Logic Studio

Hello!
I have composed a lot of songs over the years using Logic Express 7, and my favourite synth pad sound there was a sound called Warm Pad (from the EXS24 Sampler).
A half a year ago I upgraded to Logic Studio, mainly because I needed WaveBurner. Happily, all my songs sounded exactly the same after the upgrade, except from 1 sound: The synth pad sound Warm Pad. It still got the same name and location, but the sound was replaced with a very sharp and much more distinct sound (not warm at all, in my ears at least).
I have tried to replace it with different synth pad sounds from the EXS24 Sampler, and the one I find to come most close to the old Warm Pad from Logic Express, is a synth pad sound called Pad 1. Still, I don’t think it sound exactly the same.
So, in order to finish all my songs and make an album, I ask you for help:
1. Do you know how I can get EXACTLY the same sound as the old Warm Pad Logic Express, with my new Logic Studio?
2. Have you experienced the same with sounds, after upgrading from one Logic version to a newer one? And what have you done to find back to the old sounds?
I will be VERY thankful for help, because I am not a genius in the mysterious (but yet exiting) world of synthesizer synthesis.
Best regards,
Asle
Composer, guitarist and entrepreneur
Norway

I have the boxed version of logic studio.
When you install, if you pick the "ad hoc" installation you can add the logic7 patches to your existing patches.
I think running installation again you should be able to install just that.

After upgrade to Win 10 ENVY TouchSmart 15-j001tx Notebook PC display doesn't respond to touch

I just upgraded to Windows 10 from 8.1 and after I did, my touch screen doesn't respond or work. I basically have a non-touch display... ugh I've searched this forum and the hp support for possible drivers but don't see anything. I've even tried the Win 10 Drivers Update process with no success. Any suggestions?

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY TouchSmart 15-j001tx Notebook and the Touch display doesn't respond to touch after a Windows 10 update. If your computer is having problems finding and installing operating system updates, try using the Windows Update Troubleshooting tool to fix the problem. Here is a document that shows how to update drivers that are not working correctly with Windows 10. Here is a link to your driver page. I would try the section on Driver -Chipsets. Intel Management Engine Interface Driver should help. Restart the Notebook after the install. I hope something here helps you. Thanks.

No sound from the 'Music' app after upgrading to iOS 5

After upgrading to iOS 5 I went to play music in the new 'Music' App. However, no sound came from the iphone (3gS) athough the songs continued to play. Has anyone encountered this issue and how have you resolved it. I thank you for responding to my question.

Hi Guys,
I have post eariler on another forum and I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed. You probably have the problem when you use youtube or your music external speaker that there is no volume bar and no sound.   I have had the same problem But I need to happily say that I now have the fix!!!! This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along. I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed. some worked for an hour but then failed. hours of my life that I will never get back.   but since I have learnt this is not a IO5 problem but a hardware issue! ... and in paticualar is has to do with your bottom connection. Your phone is thinking it is docked all the time.
To fix the no sound problem what you need is...
1. a torch
2. a tooth brush
3. methalated spirits
4. a butter knife
Step 1.
get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there.   all that need to be removed! everything! it might look clean but still thats ok go to step 2.
step 2.
Turn on your music app and put the speakers on! If your phone is like mine it should not work. you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound.   its important you try and run the speakers as this will show you that it is a hardware problem.
step 3.
Dip your tooth brush into some methated sprits.   then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone. work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
(As you bushing you should notice the volume bar come back on or off as you scub.   This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off.   but once I cleaned it this still didn't fix the problem...)
Step 4.
Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone. Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again. slide it back and forward. Now the area of interest is about 2/3 along the connection plate to the right.   This is the area that has the infomation sent when your iphone thinks its docked.
This has worked for me and I have not had a problem since I did this 2 weeks ago.   I have since learnt that the new IOS 5 has activated a different part of the bottom conectors. if you have been using dodgy connectors or unapproved apple cables (as I was) any damage or hair and dirt on the terminal this is effecting it. Try it.   just remember if you can do something external to your phone then there lies the problem.
Hope this works for your phone as it did for mine.
Cheers

Microphone Problem in Beats Audio after upgrading to Win 10

I have a HP Envy 15 j103tx laptop which I recently upgraded to Windows 10. After upgrading, the sound worked well but the little checkbox next to the output source stopped working. As you can see I have two playback devices: one my laptop's speaker and other my tv's speaker which I have connected with a hdmi. I cannot select my device through the checkbox now. It doesn't do anything. Similarly, I also cannot select the Internal Microphone of my laptop. Due to which my microphone no longer works. I have tried to uninstall the IDT drivers and codec and reinstalling it through the HP Customer Support page. http://support.hp.com/gb-en/drivers/selfservice/hp-envy-touchsmart-15-j100-notebook-pc-series/5401191/model/6413154 . But to no avail. I request Hp to solve my problem as soon as possible.

Hi tien huu!
I have an article for you that can help you understand how to adjust your input volume from your built-in microphone on Mountain Lion. That article can be found here:
OS X Mountain Lion: Change the sound input volume
http://support.apple.com/kb/PH10824
Also, this article will help you understand some of the options you have in the sound input pane of Mountain Lion:
OS X Mountain Lion: Input pane of Sound preferences
http://support.apple.com/kb/PH10925
Thanks for using the Apple Support Communities!
Cheers,
Braden

BIAS SoundSaver Input Level Not Working after upgrade from Win 8 to 8.1

Have been using BIAS SoundSaver for INport software to digitize music LPs and cassette tapes to load on MP3 player. Worked fine with Windows 8. However, now that I have upgraded to Win 8.1, I can get sound of LPs and cassette tapes but the Input Level that controls the recording level on the software no longer functions. My computer is an HP ENVY Phoenix h9-1355 Desktop Computer with IDT High Definition Audio CODEC. I am wondering if the problem may be with the audio drivers installed on the computer.
This question was solved.
View Solution.

Hi @Alkay
I see that you are having sound issues after your 8.1 upgrade. Did you update to the 8.1 versions of the drivers?
They may be found here: HP ENVY Phoenix h9-1355 Desktop PC Drivers
Is it only the one application seeing this problem?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Hp Mini 110 1013tu Keyboard is Not working after upgrade to win 7

Hello need help on weird happenings to my keyboard..
Before i upgrade the Operating System From Windows XP to Windows 7 the Hp Mini 110 is working fine..
All keys on keyboard is working and touchpad is also working.
But after upgrading to windows 7 some keys on keyboard are not working like z,x,c,v, left ctrl and other more keys..
what do you think is the problem??
Hardware Issue? or Driver Issue?
please help thank you..

Hello @MysticDragon ,
Welcome to the HP Forums!
I understand some of the keys on your keyboard are not working after installing Windows 7.
I do not see any drivers available for your notebook for Windows 7 on the HP website, so their might be some compatibility issues as it's going to rely on Windows update to find current drivers. This doesn't mean it will not work, but I cannot say for sure that it will.
Try this:
1. Click Start.
2. Click Control Panel.
3. Click Clock, Language, and Region.
4. Click Region and Language.
5. Click the Keyboards and Languages tab.
6. Click Change keyboards...
7. On the General tab, make sure English (United States) - US is selected in the Default input language field.
8. Click on any other keyboards in the Installed services list.
9. Click Remove.
10. Repeat for all other non-English (United States) keyboards.
You may also want to try rolling back to Windows XP and see if the issue persists. It is possible the issue is coincidental and not the direct result of the update to Windows 7.
Let me know if this works!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

After upgrading from win 7 - win 8, do I really need the win 7 recovery partition?

Hello.
I'm a happy camper after upgrading my HP Spectre XT from win 7 to win 8 (Win 8 upgrade offer). The 128GB SSD disks just makes everything so smooth and fast.
However I am abit annoyed with the Win 7 recovery partition that still uses 20 GB of my total 128GB space.
I have tried searching the forums, as well as the www for any good answers, but I end up more confused.
So I am asking the community some questions that interests me, and hopefully you can provide me with some meaningsful answers
1. Can I now delete my win 7 recovery partition, and if so what is the most effiecient and safe way to do it?
2. Is there a a good way to make sure that if (heaven forbid) something would happen, I still would be able to recover my notebook preferably to win 8, and not the preinstalled OEM win 7?
3. Of course the Spectre XT has no optical drive, so if its doable I might need to make an win 8 recovery partition in the end. Is it possible?

You can use Windows builtin Disk Management to delete the partition, or EaseUS software. Both procedures are outlined at EaseUS site:
http://www.partition-tool.com/resource/windows-8-partition-manager/delete-windows-8-partition.htm
As for a Recovery option after deleting, look at System Imaging which is builtin Windows 8 also.You need an external USB hdd for this.
http://www.eightforums.com/tutorials/8956-system-image-create-windows-8-a.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Lost Mobile Network After upgrade to Win 10

Hi, any thoghts on an issue on 2nd gen X1 (3460-2SG) that after Win 10 upgrade lost Mobile Network but has WiFi OK?Looked for updated drivers but found none...Looked in "Mobile accsses" tool in previous profiles i had, and it states "device is not found" in front of the H5321 gw Mobile broadband driver Any help will be much appreciated

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY TouchSmart 15-j001tx Notebook and the Touch display doesn't respond to touch after a Windows 10 update. If your computer is having problems finding and installing operating system updates, try using the Windows Update Troubleshooting tool to fix the problem. Here is a document that shows how to update drivers that are not working correctly with Windows 10. Here is a link to your driver page. I would try the section on Driver -Chipsets. Intel Management Engine Interface Driver should help. Restart the Notebook after the install. I hope something here helps you. Thanks.

No sound on my G580 Notebook after upgrading to win 8.1

Similar Messages

Maybe you are looking for