No sound on pavilion zv6000 after windows xp install

any help?

Install Audio driver from here
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-29888-1&cc=us&dlc=en&lc=en&...
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Similar Messages

No Sound on U205-S5002 After Windows 7 Install

I tried replying to a similar thread on these forums, but the reply button was grayed out. Anyway, I'm having the problem where my sound was set to mute when I installed Windows 7 over Windows XP on my U205-S5002, and now there is no sound output regardless of whether mute is off. I found the download utility that fixes this issue when upgrading from XP to Vista, but there is not a utility for doing the same when updating to Windows 7. When can I expect an update to this utility to fix the same issue with Windows 7?
-D

Google search for "Toshiba U205-S5002 Sound Utility to Turn Mute Off After Upgrading"
These are the steps I took to resolve my issue and I was able to do it sucessfully.
-Uninstalled/Reinstalled drivers (multiple times in various ways)
-Opened up Laptop and poked and proded until I found there was no visible issue with hardware
-After extensive research found and installed the software listed above
-Pushed mute button multiple times, held for a couple seconds, pushed a few more times until I heard a popping sound from speakers
Good Luck to the many people who have had this issue, hopefully Toshiba lists the utility listed above for Windows Vista as one for Windows 7 as well (along with the muting/unmuting sound) as a solution.

No sound from laptop speakers after Windows update installed Realtek HD Audio

Laptop is HP6626US with Windows Vista 32 bit SP2.
I had an error with Windows Update which was recently fixed. When I ran the update Realtek HD Audio was installed, among many other items. I now have the red circle white X by my speaker icon and do not get any sound out of internal speakers.
The Driver version is 6.0.1.6662
Direct X version 11.0
Audio Codec ALC 268
In Device Manager Under Sound, video and game controllers Realtek HD Audio is listed with Unimodem Half Duplex Audio Device if that is helpful.
Help Appreciated.

Hello,PaulM25.
I see that you're having an issue with the sound on your notebook. Typically this means the Drivers don't exist and can also be considered as a hardware issue.
I have a couple of questions for you before we get going.
This is your notebook (HP Pavilion dv6626us Entertainment) correct?
Did this issue occur after you updated the audio drivers?
Now, you can go ahead and try these steps to resolve the issue.
Please completely remove the drivers for the Audio Device in Device Manager and “Control Panel – Programs and Features”.
Reboot the computer.
Please check if the device will be installed automatically after the computer starts. If not, please go to Device Manager and then navigate to the Audio Device, right click on it and choose “Update Driver software”
If the issue persists, please try to manually install the device driver which comes with the computer to see if it works. (You can also go to HP website to install the drivers. If you cannot find it, please give me the detail information of the device or the computer, such as brand, model, etc., I will help you search for the proper driver.)
THX

Satellite Pro U400-15I - Sound Wheel not working after Windows 7 install

The sound wheel on my Satellite Pro U400-15l does nothing after the Windows 7 clean install from XP pro.
I used the recommended Software update tool downloaded from Toshiba. The VolumeIndicator.exe process is running and the sound works OK - just not under the control of the wheel! Also the Toshiba Power control is not there but this is not a problem.
Any suggestions welcome.
Bob Sheppard

Hi Syntax,
there is no option to add the volume control to the taskbar in the control panel.
The sound driver is 'Conexant High Definition Smart Audio 221'
Interestingly, when I click on the speaker icon on the taskbar and select the mixer option I get 3 sliders called 'Device','Applications' and 'Sound Volume Indicator of Toshiba Control'. If I move this slider with my mouse I get the indicator I am looking for ( The Toshiba indicator I had under XP). However, this slider only works as a 'minimum' for the other sliders.
Thanks for your help but I still would like that volume indicator back!
Bob Sheppard

Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?

Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?

After you install Apple driver to enable the audio chip, YOU then need to manually download and install (Cirrus or Realtek audio depending on the Mac).
Cirrus realitypod mac audio driver
MacBook Pro '10 Cirrus Logic CS4206A (AB 11)
Realtek Drivers

Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me? Regards Eddie Johnson

Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?

Eddie,
There is a forum specifically for Boot Camp & MS Windows users. Because that is where the Boot Camp guru's hang out I'd recommend re-posting there.

I m unable to access apple os after windows 7 instalation and its not giving the boot option

i m unable to access apple os after windows 7 instalation and its not giving the boot option. plz any one help me out .. how to fix it or how to delete windows 7 on my macbook

Reboot, as soon as you hear the chime press and hold the option key, when the Boot Manager appears select OSX.

No network connection after windows 10 install

No internet connection after windows 10 install- laptop wont recognize any wi-fi networks- repair option on MY ATT has no option for windows 10 system

Hi,
Sorry about that. One other thing to try is to try this in the command prompt:
Start - All Programs - Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt. [For Windows 8 or 10: <Windows Logo> + x - Command Prompt(Admin)]
Reset WINSOCK entries to installation defaults: netsh winsock reset catalog
Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log
Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log
Reboot the machine
If still having issues, you may need to uninstall your network adapter and install it again.
-ATTU-verseCare

Blue screen: HP Pavilion dv6 after Windows update on Aug 1.

Last year or so, I had this blue screen issue with my dv6 laptop and was solved by uninstalling KB2670838.And things have been very peaceful since then, but the blue screen re-occured recently after windows update last week.The updates were suggested by HP Support agent installed in and was for getting ready for Windows 10 installation.But my pc gets blue in every 3 min now, so I un-installed all updated job occured last week as temporal solution. Though I wish to be ready for Windows 10 installation, I need to have operable PC for my work.(This is Win7 sp1, home eddition) It would be great if anyone could assist me on this. Thank you, Piko.

I have this problem. It happens without any warning.
I don't know the reason. Please help me.

Microphone doesn't work after Windows clean install

I have a satellite A135-S4677 (Part# PSAD0U-0N700P) which came with 32 bit vista.
I recently did a 32 bit windows 7 clean install on a new hard drive. Everything works fine except the internal microphone which does not work. If I connect an external mic it works. Speakers work fine.
I have tried the Toshiba Software Installer but it didnt help
I have tried both drivers on toshiba's website for Realtek but it still doesnt work
driver_audio_realtek_TC40053600B.exe
driver_audio_realtek_TC40064600A.exe
Anything else I can try. Please help
Thank you.

Satellite A135-S4677
After a clean install, the order of loading first the Toshiba supplied hardware drivers and hardware utilities, then the Toshiba utilities and software is critical for success.
1st Hardware Drivers & Hardware Utilities
1) Chipset related
2) Display
3) Sound
4) All other hardware drivers & hardware utilities
2nd Toshiba Utilities & Toshiba Software
1) Toshiba Value Added Package (TVAP)
2) Toshiba Flash Card Utility (sometimes included in the TVAP)
3) All other Toshiba utilities and Toshiba software
Also, Toshiba laptops are very finicky about only using Toshiba supplied hardware drivers to work properly, and those drivers supplied by Windows Update and/or the chip makers. That's why I recommend disabling automatic Windows Updates. To do this, click 'Start - All Programs - Windows Update', on the menu at left click on 'Change settings', under 'Important updates' click on the drop down menu at right and choose 'Never check for updates (not recommended)', and click OK. Then only manually check for Windows Updates, check all available updates carefully, and never allow Windows Update to change any of your hardware drivers. Though you should still regularly check for updates.
So, after disabling automatic Windows Updates, try downloading and installing these drivers in this order, and see if it resolves your mic problem.
Intel Chipset SW Installation Utility for Windows 7 (32/64)
Intel Display Driver for Windows 7 (32)(v8.15.10.1825)
Realtek Audio Driver for Windows 7 (32/64)(v6.0.1.5904)
Please let us know what happens. Good luck.
Mike

Strippe Problem after windows re-install...

Hi,
I'm the happy owner of a K8N Diamond Plus with, as you know, two raid controllers onboard (NVidia & Silicon Image).
I've been using two strippe (Raid0) on the two raid controllers for 6 months now w/o any problem...
Since my windows became unstable, i've decided to do a fresh windows xp re-install.
My system boots from a strippe (connected to the NVidia Raid controller, 2x250Gb Raid0) w/o any problem BUT after reinstalling windows and installed the
silicon image raid driver it couldn't recover the strippe (raid0) connected to the silicon image controller (drivers & utility are installed correctly).
How can i recover my partitions on this strippe !!
I really need to recover those because i've really valuable data on those drive.
I can't understand why my raid0 & my partitions where automaticaly recovered when installing the drivers & software... It works fine with all other raid controllers i've ever used.. (promise & nvidia)
Any help appreciated..
Yves

Hello !!
MSI released new silicon image drivers for this mobo, install them while windows setup using F6.
You can find them here:
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=710&kind=1
Greetz

HT3986 how do you enlarge boot camp partition after windows is installed

how do you enlarge boot camp partition after windows is installed

Welcome to the Apple Support Communities
You can do it with third-party programs, but I don't recommend it because you can damage the hard drive. The best way to do it is to delete your Windows volume and create it again with the size you need

Computer OS wont startup after windows 10 install

Hello im having problem booting my system after installing windows 10 . I made the installation and it worked fine from upgrading from 8.1. But then I wanted to format the drive and at the format menu it got stuck at 2 % and then I restarted the computer. Now it will hang at hp logo and go back to the same logo again. Do I have to replace my hard drive?

From what I understand, if you completed the Windows 10 install and all went to completion, then you are supposed to be able to do a clean install with the Windows 10 DVD or USB download. With a working computer, GO TO THIS PAGE and scroll down to the "Download Tool button" Pick the 64 Bit version. Once clicked it will ask if you want a DVD or USB for the iso.Once it is done and you have either the DVD or the USB version, see if you can then install Windows 10. If that fails, you might need to replace the hard drive.

Z580 won't boot after Windows 7 Install

Hi,
After a clean install of windows 7 on the hard drive, Lenovo Z580 wont boot up but when hard drive it put into my old Acer laptop, boots fine.
Initially had to remove the hard drive from the Lenovo and put into another laptop to install windows 7 as lenovo wouldnt boot from usb or CD. And then after install tried putting hard drive back into Lenovo and just doesn't boot at all. Just goes to boot manager sceen and then blank in a continous loop.
Please help!
Thanks in advance!

Welcome to the forum!
"remove the hard drive from the Lenovo and put into another laptop to install windows "
You stated the exact reason for your problem. You can't install Windows 7 on one laptop and expect it run on another by swapping the hard drive. It doesn't work. During the installation Windows inventories the installed hardware and configures itself accordingly. Since they are two different machines, Windows won't boot. You are going to have to resolve the USB or Optical drive boot problem on the Lenovo laptop you wish to install Windows on.
During bootup have you tried using the Boot Menu to boot the machine specifically from the optical drive?
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

How do I use existing sync key after Windows clean install?

Hi,
I had setup Firefox Sync on my old Windows 7 install and I have the Sync Key given during the set up. I had to clean install (format C drive) my Windows.
Is there any way I can use the old Sync Key to get all my bookmarks and stuff back?

The problem has resolved itself...
...despite spending several pointless hours trying to delete the existing BootCamp drivers without success, I finally restarted Windows yet again - and this time I was easily able to delete the existing drivers.
I then restarted my Mac, installed the latest drivers without issue and it all works just fine.
Windows, eh?!

No sound on pavilion zv6000 after windows xp install

Similar Messages

Maybe you are looking for