No Sound on R3D files in AE

I have some R3D files here from my Red Scarlet and Epic. I used the A Box from wooden camera and a microfone with xlr to record sound direct on footage. In Redcine X and Premiere i got the waveform and the sound, but in After Effects i got only a dead spine. No visible waveform. I can activate sound button on and of, also can change the DB, but nothing happend. I also got no sound with Ram preview or rendering. If i put the footage in a Premiere project and import this Pr Projekt to after effects, than i got the waveform. But that is not the way i want to use my footage. Now i lost al the RAW abilitys from my R3D files and some other specials
Does somebody know, why i got no sound/waveform?
I have the latest CC version of AE.

I got an other project now. First time i imported the files, i got al my waveforms. Than i start working. Deleting, cut, duplicate, some files in the composition. But i did not deleted the files in the project. I leaved them al imported. Since i have done a bit of cuting, i lost al my waveforms. If i add al files to another comp i also have no waveforms. Reload footage has no effect. Also starting a new project and import the footage has no more effects on the waveform. I do not get the waveform anywhere.
Pls i need some help, why i lose my waveforms

Similar Messages

R3d files previously functional in CC 2014

I have previously used these files and now get and error "unsupported media or corrupt file" The R3d files are able to open in REDCINE X....any solutions?

A screen grab of your sequence settings would be handy. Also, I'm assuming you've checked the sequence settings and sound hasn't somehow been muted or something ...
Neil

Audio stops after several seconds of playing in CS6 on PC (R3D files)

Hi,
I have recently come across a significant problem while editing R3D files in Premiere Pro CS6. When I play back my sequence the video will play fine but the audio will only play for a couple of seconds before cutting out. The audio meters continue to show that audio is coming through though no sound can be heard at all. When I stop and start the sequence again the audio begins to play again for a couple of seconds before cutting out. There is no problem with video whatsoever.
- Has anyone else experienced similar problems or have any suggestions to what might be going on and a possible fix?
My system specs are below. System speed should not be an issue at all as the sequence plays fine on my much slower and older imac (albeit at a reduced resolution).
I am on an intel 3rd Generation i7 PC (quad core) running Windows 7 Home Premium (64bit)
8GB of RAM
2GB Nvidia 650M graphics card
256GB SSD drive for startup and applications.
Any help would be very much appreciated, unfortunately until this problem is solved editing on this system just wont be possible.
Thanks,
David

I seem to have it working properly now. My issue seems to be centered around USB3 connections only operating at USB2 speeds. When the USB3 connection is working correctly all audio works perfectly. The store where I purchased my laptop from did a bit of a lazy software and driver install when I purchased the system. They are fixing the issue today and should have the laptop back and fully functional by tomorrow. Will test it again then. From what I have seen though, system runs very well when USB3 connections function as should.
Strangely though, I now seem to be experiencing an identical issue with my iMac after updating to the latest version of CS6. It is even worse though, with no audio playing at all. From both these experiences, I'm guessing there still might be a few bugs in the software too.

STRANGE problem with sound in SWF files...Please help if you know how...

Hello,
Okay, so, I recently learned how to use Adobe InDesign to create a book. there is a lot a still don't know. When I export my document as a SWF file, it works great and has sound and animations where it should. However, if I move that SWF to a new location, such as my desktop or uploading it to an e-mail, it looses all the sound information. To add sound to each page, I added a hidden object to each page that was the sound file so that I could attach it to a button. It seems that it is loosing that sound file if I move it to a new location. Any ideas or solutions?

UPDATE: I have learned that my problem is related to a "resourse folder" which must go wherever the file goes in order for it to have sound. This is a bit inconvinient for me, as my client is computer illiterate. I really want to find a way to just embed the sound into a file that you can just open and play. To the best of my knowlege, SWF format is the only format that allows for the page turning animation. Does anyone know a way to embed the sound into the SWF file or am I SOL here?

I can't get CS6 to recognize R3D files. I put the plugin and the server files in the proper spot and I used 64 not 32 like it said. I still can't get it to work

The only thing to do to get the R3D files working is download a plugin pack with 2 files in it. one goes in your plugin folder the other in some other folder. I found both original files and replaced them with the new ones. I have rebooted twice... nothing. it won't recognize R3D files. The Camera is a Red brand Epic Dragon and it puts our R3D files. R3D's are easily manipulated in Redcine, but I can't add my .mov files on it so I need to be able to work with these files in PP.

I'm sad now
Good thing I have a PC with 32-bit windows!
Now, I can only assume apple is working on a 64-bit
fix? I suppose that info/ETA is on the itunes page,
I'll go take a look.
Who knows what Apple plans are? I do know that they do not discuss upcoming releases of anything until its available.

Workaround for slow performance and poor resolution with RED R3D files in After Effects CC 2014 (13.0)

http://blogs.adobe.com/aftereffects/2014/06/red-r3d-problems-after-effects-cc-2014-13-0.ht ml
The After Effects team are investigating a bug in After Effects CC 2104 (13.0) where RED (.R3D) files are very slow and the image resolution is poor, about 1/8 sampling.
The following workaround has been reported to solve the problems in some cases:
Save the project.
Choose Edit > Purge > All Memory & Disk Cache.
Please post in this thread about whether or not this workaround helped you.

Intentionally cross-linking threads: this issue was first reported in this thread, which has an ongoing discussion:
AE 2014CC RED R3D files support broken - footages looks bad, everything slow.
The thread you are in now is the comment thread for the blog post. Please post in whichever thread makes more sense for you. I am monitoring both.

I have elements 12 in Windows 7 but is unable to see mp4 files in the organiser. The sound from the file is there but no image!

I have elements 12 in Windows 7 but is unable to see mp4 (Canon G16) files in the organiser. The sound from the file is there but no image!
Other file formats from Canon is no problen. So What to do??
Roger

Me again,
A friend suggested that I do a system restore.
I did a search for system restore in Windows 7 and got a very intuitive menu.
I selected an earlier system restore point and executed the restore.
After the computer restart I reloaded Firefox 5.0 and the Ask.com problem was corrected.
My friend says this approach may work about 25% of the time to fix this kind of problem. In my case it worked and I am happy.
Thanks all.
Richard Ryer

Problem accessing sounds in jar file

Hi,
I have made a program and packed it to a jar file.
Everything works fine in the IDE, so this is purely a matter of jar access.
The jar has 6 folders.
framework (which is one of my packages)
META-INF
sound (also my package)
sounds (my wav files for the program)
sprite (another package)
sprites (my graphics for the program).
I access the graphics in sprites, from a class in sprite and have no problem with it.
try {
               URL url = this.getClass().getClassLoader().getResource(ref);
               if (url == null) {
                    fail("Kan ikke finde ref: "+ref);
               sourceImage = ImageIO.read(url);
          } catch (IOException e) {
               fail("fejl ved load: "+ref);
          }The problem is accessing the wav file in the sounds folder from a class in the sound folder.
try{
               AudioInputStream stream = AudioSystem.getAudioInputStream(new File("Sounds/1999.wav"));
               AudioFormat format = stream.getFormat();
               DataLine.Info info = new DataLine.Info(Clip.class, stream.getFormat(),
                         ((int)stream.getFrameLength()*format.getFrameSize()));
               clip = (Clip) AudioSystem.getLine(info);
               clip.open(stream);
          }I have tried to use the class loader like this (instead of AudioSystem.getAudioInputStream) :
AudioInputStream stream = (AudioInputStream) this.getClass().getClassLoader().getResourceAsStream("sounds/1999.wav");
but it didnt help.
Does anyone have any suggestione?
Please, if all you can do, is paste a link to the java API, save your energy. I have already looked and it was no help, as im still only a student of java.
I would like an actual suggestion, so i can see it work, then i can make work my way through the API from there.
Edited by: Mondariz on May 7, 2008 8:26 AM

Don't try to use a File object to access resources from the jar. You have a working process for accessing the sprites, just use the same process to access the sounds. Only not quite the same method, there's one method which returns a URL and a very similar method which returns an InputStream. I would post the link to the documentation but you asked for us to not do that. Anyway you seem to know where it is.

No sound in swf file

I need to resize an flv file. I opened it in Flash and embedded it as a movie clip in the timeline. I also embedded into the timeline frame sequence. I was able to resize the file successfully. When I preview publish it as a swf file, it plays with sound in Flash. When I export the clip to a flv file, it doesn't play with sound. I have also tried to convert the flash from swf back to flv using After Effects, but there is no sound either in AE and when I play the converted file in Adobe Media Player. I am stumped on how to get any sounds from this file and appreciate any help I could get.

Have you asked Maps Marker Pro for support for their product?
https://www.mapsmarker.com/support/
Chances are you need specific code for Gecko based browsers, which might need different code than Trident, WebKit, and Blink based browsers use.

Naming R3d Files in Premier + Timeline Settings for 4K plus archival HD and SD footage

We recently made the switch over to Premier and are beginning post on our first 4k 16x9 project. Very exciting to be editing with the raw r3d files, our one concern is that naming the files (it is a feature doc with a lot of footage) in premier will break the link to the orginal file once we export via xml to resolve for the online as well as to go back to color correct in Red CineX. Is this correct or comepletely misguided. My gut says that naming the files in premier is just adding to the metadata associated with the clip and the export should be fine. Can you please set me straight?
We are also going to be adding archival footage from 1080 to SD with varied frame rates. The bulk of the footage is shot at 4k 16x9 at 23.98. What would you recommend our timeline setting be set at? Ultimately we will be exporting at 1080, but ideally want to keep the timeline as high res as possible for future export at higher resolutions.
Thank you for your help and guidance!
Best,
Travis Rummel
felt soul media

I'm afraid there probably isn't a good way to scale SD to 4K...
unless it originated on film and you can go back to transfer.
Magic Bullet Instant HD works pretty well upscaling SD to HD.
when you say renamiong can "sometimes make tracing the original media file on disk more difficult"
I am referring to file management on disk as it relates to the Project.
For example if you load all of your media and change the file names,
then discover that there is something quirky with a particular file... it will
make it more difficult to trace on disk for evaluation.
It will not affect the media reference in .xml export at all.

Lightroom 4 won't save color correction to .R3D file

Really didn't have problems until export. I'm amazed with how fast Lightroom plays playback on .r3d files. Anways after all the color correctrion is done I try to export the file to its original format (r3d) but upon playing the file in Red Cine-X, non of the color corrections I made are saved. It's as if I didn't edit the file at all. However if I choose to save the file as a H264 and play the file, all my corrections are saved. So it only doesn't work if I choose to export my file as the original R3d format. Anyone know whats wrong or how to solve this?

Hi mikey,
LR never writes to original files, and it does not do sidecars for videos.
So in order to view your LR adjustments outside LR you need to use a format which LR can write to, like H264.
Cornelia

Scratchy, distorted, garbled sound from MP3s files

I'm having really horrible scratchy, distorted, garbled sound from MP3 files. AAC encoded files play extremely clearly on iTunes 10.5

After reviewing all comments, it appears that this issue is squarely with the 10.5 upgrade that Apple did on I tunes. I have done all the uninstall and re-install that you can do. Songs play fine on some, terrible on others, but yet they all will play on Windows Media Player. I can't believe it is the chipset for those that AMD processors, because everything was fine on the 10.4. So, Apple please fix this or offer us a way to uninstall from the 10.5 to the 10.4 where everything should be okay. Awaiting your reply with thousands of others!

Newbie question: Why is "learn sound model" greyed out when trying to remove background sounds in a file using the Spectral Frequency display?

I am trying to remove background sounds in a file using the Spectral Frequency display. The first edit on a new file, this process works fine:
1. use brush to cover sound
2. right click, learn sound model
3. effects/noise-reduction-restoration/Sound Remover
The next time I try to remove another sound in the file, "learn sound model" is greyed out. I have to close the file and reopen to be able to make another edit. What on earth is going on? Can it only learn one sound model or something?
I'm a newbie, so thanks in advance for your advice!

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Trying to convert R3D to mov but have the converted file placed in the same folder as the source R3D file.

Hay all :-)
Had a quick search and couldn't find an answer to this so asking the question :-)
It looks like i'm going to have to use Premier Pro to convert all my R3D files to mov because *Another Piece of Software ;-)* just doesn't recognise them :-/
I know i can import the R3D files into Premier and then export then as mov which is fine but the problem is in the export window theres no option to place the exported file into the same folder as the original R3D file, there is only the option of choosing a folder which, doesn't pre-designate itself to be the original files folder for some reason.
I have 100s of R3D files to convert to mov and having to find and choose the correct folder for each of them individually would be an incredible pain.
Thx for any help :-)

Wow ... just checked through PrPro myself and queued out to AME, and even went into Prelude to try a transcode. You're right, you have to specify a location, or have one in the preset group ... but it has to be a specific one, there's no option for "original folder".
I'd suggest a wish be placed on this, as there's times I'd want to use it also.
https://www.adobe.com/cfusion/mmform/index.cfm?event=processform&name=wishform
Neil

Can´t import R3D Files from external HDD

Hello everyone,
Hallo Zusammen,
I´ve got a huge problem with importing files from my external Thunderbolt Drive. It´s from LaCie, a 6TB Version connected to a Mid 11 iMac.
Ich habe ein großes Problem beim Import von meiner externen Thunderbolt Festplatte. Es ist eine von LaCie mit 6TB, welche mit einem iMac Mid 2011 verbunden ist.
Since I´ve upgraded from OS X Mavericks to Yosemite I´m not possible to import my R3D Files (Raw footage from RED Camera) from the Thunderbolt Drive anymore. There was no problem
Seit ich meinen Mac von Mavericks zu Yosemite geupgradet habe, ist es nicht mehr möglich R3D Dateien (Rohdatenmaterial von der RED Kamera) von der Thunderbolt Platte zu importieren. Es gab
at this with Mavericks.
mit Mavericks keine Probleme.
I´m using Premiere Pro CS6. Importing R3D Files directly from the internal Drive sometimes still working, but with the LaCie it says: Not supported file format..
Ich benutze Premiere Pro CS6. Wenn ich R3D Dateien direkt von der eingebauten Festplatte importiere, funktioniert es hin und wieder, aber bei der LaCie kommt immer: Dateiformat wird nicht unterstützt oder ist beschädigt.
Same problem with Prelude - all my connections are lost.
Das gleiche Problem habe ich mit Prelude - alle meine Verbindungen wurden gelöscht.
Java Update is done.
Ein aktuelles Java Update wurde bereits durchgeführt.
Specs:
- 6TB LaCie Thunderbold
- Mid 11 iMac i7
- Premiere Pro CS6
- Java 8
It would be awesome if anyone could help me!
Es wäre großartig wenn mir jemand helfen könnte!
Thanks
Danke

Hey Kevin,
thanks for your reply. I fixed the problem.
I need to download these 3 programs from RED:
RED APPLE WORKFLOW INSTALLER
RED ROCKET-X™ INSTALLER
REDCINE-X PRO
After installing and restarting everything works fine - no other problems with importing the R3D files.
Donwload Link: Downloads - RED Digital Cinema
Hope it also works for the others,
best regards,
Marc

No Sound on R3D files in AE

Similar Messages

Maybe you are looking for