No sound on sb live24 created fi

I have just installed a sb li've 24 external which works fine playing back music that is already on my pc. The problem is when I transfer a track from cassete tape to the pc (via the 'line in' jack), it creates the file which I can save as mp3 or wma but there is no sound when it is played back.
any ideas would be appreciated.

Mikeyice,
Try doing a cleansweep and reinstall of the sound card to see if perhaps the updated drivers did not install correctly. Follow these instructions to cleansweep:
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jeremy

Similar Messages

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

Well, I really would love the new unreleased mac pro however , I'm not sure of the expected cost , Everyone speculates from $3,000 to $8,000, in which I may have to wait a while to purchase.
To the point .... I want fully functional thunderbolt ports to be on the current mac pro's .... wonder if anyone had workarounds yet?... or could I chain the the current mac pro to a mac mini to make that happen?

I am trying to record voice only from a mixer so I can sing in real time on an internet Karaoke site. The sound that the mixer creates is not transferred on to the on site recording.

I am using a Behringer mixer with FX. I have tried a number of ways to hook up. I using headphone jack on puter to outputmusic tracks to mixer throgh CD/ Tape in on the mixer. Then output fro mixer to line in on computer and monitorin g through the mixer. The ranges and mixer effects are heard through the headphones, however the voice sound created does not transfer to the online recording. The quality is lost in the Mac. Can anyone help me please?

I´m using same config, MBA rocksmith cable and Mic powered by a (singleAA baterry) Ive tried recording in Quicktime (more or less noise, good volume), audacity(way too low volume) SoundtrackPro (same low volume), GARAGEBAND (lot better volume and very decent recording, great presets and much better export options!
when you listen your recording on garageband it will sound LOW volume, im using mac headphones almost at max vol, maybe it lowers the volume so there is no feedback,... BUT whe you export to file and open it on Soundtrack or quicktime VOALA! normal voice recording is hitting 0dbs, so that gives me chance to lower down to -12dbs after doing my edits.
Use GARAGEBAND to recrod voice, or any other intrument, works great with Rocksmith USB cable, mic does require use of AA battery.
Busting my head with this for hrs until I tried Garageband.
good luck.

Problems with sound VIs - can't create usable new sound file

hello all!
I'm trying to create a VI that will, in real time, take a sound file and place it, on demand, as many times as you want into a longer sound file. it should place the file once each time a button is pressed. The rest of the audio I want to be just silence, but still filling time so that the output file is in real time.
(i am a sound editor for TV shows, and for my master's thesis i'm trying to create this program so that I could say, watch a video clip of someone walking and at the same time place footstep sounds in real time while watching the clip, just by pressing a button each time i see a footfall.)
i attached the VI i have so far. the only subVIs are in the Sound VI palette (no custom subVIs are used). No external hardware is used, so you should be able to see exactly what i see. i would attach the WAV file, but it's not an allowed attachment. You should be able to use any WAV, stereo 16-bit, 44.1 kHz file.
the problem i'm having so far:
the resulting WAV file is not playable by any means I can figure out. and it's always 4 KB. So obviously I'm missing something - maybe misuse of the Sound VIs? (Though the VI does recognize that I'm feeding it a stereo, 44.1kHz, 16-bit file. so that's good.)
i'm working on a Mac Powerbook G4, Labview 8.2, 1.5 GHz, Mac OS 10.4.8, 1 GB RAM. and i've tried both the
internal sound card and an external sound card (Digidesign's MBox which works with
ProTools).
thanks so much for your help!!
--Liz F.
Attachments:
prototypeA.vi ‏31 KB

Is a printer connected? Is it turned ON? Is the driver up to date?
Illustrator checks this every time and also writes information on the printer into the file.

Sound design: How to create a buzzing resonance?

Hi forum,
I'm trying to simulate the sound of this African instrument called Dzi. It's basically a marimba with gourd resonators that add a kind of buzzing sound. Marimba samples are easy to come by, but I've had a hard time adding the buzzing element. I've spent a few hours with Sculpture, but never even got close. Does anyone have any advice? Other ways to think about the sound I'm trying to get to are: The buzzing vibrations of a coin on a drum after you hit the drum (or a wooden bar); or the buzzing when you slap a ruler with one edge held to a desk, or even blowing on a comb with paper wrapped around. Any ideas?
I need to end up with a full-range sample instrument, so it would be nice to use a software instrument for this, rather than recording and layering and making all the zones from audio files.
Powerbook G4 Mac OS X (10.4.5)

I ended up using a second sample from a EMU soundfont (a drum called Bendir which has a buzzing rattle-kind sound), used a high-pass to get rid of the drum part, and added the sound to the Xylophone sound.
The distortion idea, by the way, sounded pretty neat, it was just difficult to get the distorted sound to appear significantly different from the original. All sorts of processing (including pitching down) still ultimately couldn't hide the fact that the sound came from the same sample, not from a different sound "generator" of the same instrument.
So thanks again to everybody for helping me think this through and come up with such elegant solutions.

Sound Blaster Audigy Platinum creating hard re

Greetings. Looking for insight on what I might do to alleviate a problem I am having with a Sound Blaster Audigy Platinum sound card and dri've.
This is the original Audigy Platinum. I am running windows XP pro with all sevice packs installed.
Installation of this new unit went well. No hardware or software conflicts and the card and audio "dri've" worked on the first attempt. All software also installed properly.
Unfortunately, when playing any audio through the system continuously for over a minute or so, the system begins to have trouble. This trouble is exerienced independent of what software or media type is playing the audio.
First, the sytem will have momentary "hangs" where the audio will be interrupted by a monotone electronic beep lasting from a fraction of a second to a couple of seconds long. The audio will then resume from the point it had left off when the tone began. If I continue to play audio after these tones begin, the system will shortly thereafter go through a hard reset. (By hard reset I mean an immediate return to memory count, bios screen and then startup as if I had pressed the reset button or the power had been interrupted)
The ONLY time this takes place is when I have been playing some sort of continuous audio.
As I said, if anyone has experienced this and has any insight as to the cause or more importantly the remedy to to the problem, I would appreciate the input.
Thanks.
JP

No comments on this?
Just hoping someone will be able to help me so I can use my audio files once again.
JP

How to setup IIS to play sound ? How to created .raw? Where Doccument?

I programming with IPPhone for 3 ys, but so surprised, there is less more less about how to setup the IIS to test RTP (or something like streaming). Please anyone can help to provide information about this. My customer want to Broadcast a wav file to announce some thing, how can I do it? I search all cisco doc but no any infomr

There are 3rd party software out there which can do a much better job at broadcasting wave file, send live page, text notification, weather alerts, etc.
If you want to develop yourself, you need to use RTPTx, RTPRx and CiscoIPPhoneExecute objects from SDK. To broadcast audio to a multicast, there is also sample code available. The problem is managing the phone list and groups and providing an intuitive interface for users and sys admins. I do have some sample code that we used in PhoneTop Messenger product, but it is all in Java and needs a Windows box to host it.

Memory leak in AudioServicesCreateSystemSoundID with sound files

hi !
Instruments indicates a 64Ko memory leak in "AudioServicesCreateSystemSoundID" when I use a sound that I have created with GBand / iTunes. When I use the sound file "tap.aif" from the "sysSound" sample, there is no memory leak.
What's wrong with my audio file ?
It's a AIFF file, 95Ko, 8 bit mono 22Khz @ 176kbps.
thanks...

appFile = [ [ NSBundle mainBundle ] pathForResource : _filename ofType : _extension ];
FileUrl = [ NSURL fileURLWithPath: appFile ];
if ( AudioServicesCreateSystemSoundID( ( CFURLRef ) FileUrl, &soundID ) != kAudioServicesNoError )
return false;
I don't think the code is wrong because when I change the name of the sound in '_filename', there is no leak.
I haven't found in the documentation the audio file properties ( 8/16 bits, ... ) supported by 'AudioServicesCreateSystemSoundID'.
The code is for iPhone.

Can't get sound to work

Hello,
haven't posted here in a long time, but now I decided to install arch on the new laptop I bought and I managed to get myself in a bit of trouble seeing that I never used a laptop before, let alone installed arch on it.
So my laptop model is Lenovo IdeaPad G510 ( CPU: Intel Core I5-4200m Haswell GPU: AMD Radeon HD 8570M).
I installed the propriety driver for the gpu but I use the intel integrated gpu for now because the X server doesn't start when using the amd driver, so that's one problem I jope you can help me with.
My other and more urgent problem is that I can't get the sound to work and creating a custom alsa conf just breaks alsa anyone has a clue as to how I can fix that?

it's the one built in with the CPU (that's why I posted the cpu make) and the alsa conf was like the one listed in the wiki where you specify one card to load before the other ( already delted the .conf so I can't post it sorry), my main problem is that I don't even know how to decide which of the devices show by aplay - l is my sound card, just never had to deal with sound before

Sound Loading in IE

Hi,
I'm trying to load a sound into various objects created on
stage dynamically.
Within Flash env. and FireFox, all goes right:
A container MC is created
A Sound object is created within that MC
onLoad function is registered for each container['s].sound
I can't figure out how to bypass the fact that IE wouldn't
fully-load the sound into memory. Needless to say this problem
stucks my movie from playing properly later on.
Following is how I create the sound obj.
Thanks.

Here are some thoughts
1. Is it possible a corrupted sound is caught in the cache on
the testing
machine?
2. Substitute other sounds to see if the sound is a problem.
3. Assign the onLoad BEFORE the loadSound method. It is
remotely possible
that at run time the loadSound gets an undefined reference to
onLoad.
Remember that thisMC_snd.onLoad = function is a runtime
assignment versus a
compile time and so for runtime do things in the order needed
for proper
memory assignment.
Lon Hosford
www.lonhosford.com
Flash, Actionscript and Flash Media Server examples:
http://flashexamples.hosfordusa.com
May many happy bits flow your way!
"Tal_CS" <[email protected]> wrote in
message
news:ed4a4k$ba$[email protected]..
> Hi,
>
> I'm trying to load a sound into various objects created
on stage
> dynamically.
> Within Flash env. and FireFox, all goes right:
>
> A container MC is created
> A Sound object is created within that MC
> onLoad function is registered for each
container['s].sound
>
>
> I can't figure out how to bypass the fact that IE
wouldn't fully-load the
> sound into memory. Needless to say this problem stucks
my movie from
> playing
> properly later on.
>
> Following is how I create the sound obj.
>
> Thanks.
>
>
> var thisMC:MovieClip =
this.createEmptyMovieClip("object"+i+"_mc", i);
> thisMC.snd = new Sound(thisMC);
> thisMC.snd.loadSound(objects_array
.src, false);
> // false = [I want the sound to load into memory as an
event sound, for
> later
> use. (short sounds)]
> [...]
> thisMC.snd.onLoad = function(success:Boolean):Void {
> if (success) { [...]
> // to this step IE doesn't reach!!
>

Help setting up sounds effect page for ipad

Hello,
For the past few years I've maintained a fun webpage (made in DW) that plays sounds on click. I use it to accent certain moments in my class and sometimes I run several sounds at once to create a mood during stories. This year our students are using ipad's and this sound page does not work the same way. It does not play certain sounds, and opens others (wav, mp4 on a separate page) one at a time. Here is a sample line of code that works on Macbooks, but will not play at all on ipads.
Here is the code:
<embed name="CS1345392109055" src="rimshot.mp4" loop="false" autostart="false" hidden="true" width="0" height="0" enablejavascript="true"></embed>
Found on this page: http://gr8writers.com/soundtest2.html
It plays on a laptop, but no sound on an ipad.
This next sound plays, but opens up a separate page - also not what I need to happen:
<embed name="CS1345400314623" src="creepyorgan.mp4" loop="False" autostart="False" hidden="True" width="0" height="0 enablejavascript="true"></embed>
Found on this page: http://gr8writers.com/soundtest2.html
What I need to be able to do is have these sounds play on click without opening a separate window. Thanks if you can help!

Use an HTML5 doc type with the <audio> player tags.
<html>
<head>
<meta charset="utf-8">
<title>HTML5 Audio Demo</title>

</head>
<body>
<p>This works in all modern browsers.
The .ogg file type supports Mozilla and Gecko browsers.
MP3 audio is supported by the rest.</p>
<audio controls>
<source src="path/yourSong.ogg" type="audio/ogg">
<source src="path/yourSong.mp3" type="audio/mp3">
</audio>
</body>
</html>
Nancy O.

Keynote sound/picture synchronisation problems

I am using Keynote '08 for a presentation with 500 photos and a sound track which I created in GarageBand using various music tracks (total time 45min.) The problem is that when showing the presentation the sound track is no longer correctly synchronised with the picture slides, although this was the case when I last quit keynote. I know a lot of you have been having problems with keynote 08. Is this just another unsolved problem that needs to be fixed by apple? Any thoughts / ideas would be appreciated.

Try a planner rebuild - Sercices 0 0 1 Select Planner Rebuild and follow the on-screen instructions.

Background Movie has No Sound

Hello,
I am new to Livetype and am trying to create end credits for my film.
I have exported a quicktime movie from FCP of the last scene and the music to play during the end credits.
When I bring this clip as a background movie into Livetype it plays with NO SOUND at all.
I need sound so we can create the credits to the rhythm of the music.
Anyone have any suggestions?
Thanks,
Marc Griffin

LiveType doesn't support sound.
If you must have sound, try to do this in Motion.
Otherwise, place cuts to the beat in a duplicated version of your end credits sequence, then export that for LiveType. The cuts should show up as markers in LiveType.

Problem to create Explain Plan and use XML Indexes. Plz follow scenario..

Hi,
Oracle Version - Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit
I have been able to reproduce the error as below:
Please run the following code in Schema1:
CREATE TABLE TNAME1
   DB_ID            VARCHAR2 (10 BYTE),
   DATA_ID          VARCHAR2 (10 BYTE),
   DATA_ID2         VARCHAR2 (10 BYTE),
   IDENTIFIER1      NUMBER (19) NOT NULL,
   ID1              NUMBER (10) NOT NULL,
   STATUS1          NUMBER (10) NOT NULL,
   TIME_STAMP       NUMBER (19) NOT NULL,
   OBJECT_ID        VARCHAR2 (40 BYTE) NOT NULL,
   OBJECT_NAME      VARCHAR2 (80 BYTE) NOT NULL,
   UNIQUE_ID        VARCHAR2 (255 BYTE),
   DATA_LIVE        CHAR (1 BYTE) NOT NULL,
   XML_MESSAGE      SYS.XMLTYPE,
   ID2              VARCHAR2 (255 BYTE) NOT NULL,
   FLAG1            CHAR (1 BYTE) NOT NULL,
   KEY1             VARCHAR2 (255 BYTE),
   HEADER1          VARCHAR2 (2000 BYTE) NOT NULL,
   VERSION2         VARCHAR2 (255 BYTE) NOT NULL,
   TYPE1            VARCHAR2 (15 BYTE),
   TIMESTAMP1   TIMESTAMP (6),
   SOURCE_NUMBER    NUMBER
XMLTYPE XML_MESSAGE STORE AS BINARY XML
PARTITION BY RANGE (TIMESTAMP1)
   (PARTITION MAX
       VALUES LESS THAN (MAXVALUE)
NOCOMPRESS
NOCACHE
ENABLE ROW MOVEMENT
begin
app_utils.drop_parameter('TNAME1_PAR');
end;
BEGIN
DBMS_XMLINDEX.REGISTERPARAMETER(
'TNAME1_PAR',
'PATH TABLE     TNAME1_RP_PT
                          PATHS (INCLUDE (            /abc:Msg/product/productType
                                                                /abc:Msg/Products/Owner
                                 NAMESPACE MAPPING (     xmlns:abc="Abc:Set"
END;
CREATE INDEX Indx_XPATH_TNAME1
   ON "TNAME1" (XML_MESSAGE)
   INDEXTYPE IS XDB.XMLINDEX PARAMETERS ( 'PARAM TNAME1_PAR' )
local;Then in Schema2, create
create synonym TNAME1 FOR SCHEMA1.TNAME1
SCHEMA1:
GRant All on TNAME1 to SCHEMA2Now in SCHEMA2, if we try:
Explain Plan for
SELECT xmltype.getclobval (XML_MESSAGE)
FROM TNAME1 t
WHERE XMLEXISTS (
'declare namespace abc="Abc:Set"; /abc:Msg/product/productType= ("1", "2") '
PASSING XML_MESSAGE);WE GET -> ORA-00942: table or view does not exist
whereas this works:
Explain Plan for
SELECT xmltype.getclobval (XML_MESSAGE)
FROM TNAME1 t- Please tell me, what is the reason behind it and how can I overcome it. It's causing all my views based on this condition to fail in another schema i.e. not picking up the XMLIndexes.
Also
SELECT * from DBA_XML_TAB_COLS WHERE TABLE_NAME like 'TNAME1';Output is like:
OWNER, || TABLE_NAME, || COLUMN_NAME, || XMLSCHEMA || SCHEMA_OWNER, || ELEMENT_NAME, || STORAGE_TYPE, || ANYSCHEMA, || NONSCHEMA
SCHEMA1 || TNAME1 ||     XML_MESSAGE ||          ||          || BINARY     || NO     || YES ||
SCHEMA1 || TNAME1 ||     SYS_NC00025$ ||          ||          || CLOB     ||     ||
- Can I change AnySchema to YES from NO for -column_name = XML_MESSAGE ? May be that will solve my problem.
- SYS_NC00025$ is the XML Index, Why don't I get any values for ANYSCHEMA, NONSCHEMA on it. Is this what is causing the problem.
Kindly suggest.. Thanks..

The problem sounds familiar. Please create a SR on http://support.oracle.com for this one.

How to create ringtone from my music?

I've been able to download some of my short music clips and use the clips as ringtones. However, for the longer pieces of music, I want to use just 30 second of it. I've already imported the audio file into my BB's micro SD card.
The BB Media Manager Help Center provides the following instructions (below), but when I try to right-click on the file, I don't get the "Edit with Quick Sound Editor" function at all. I've tried everything to get this function with no avail. Please help!
You can create ringtones from existing audio clips—such as your favorite song—with the Quick Sound Editor.
To create a ringtone:
In Media Manager, browse to the audio file from which you want to create a ring tone.
Right-click the audio file and choose Edit with Quick Sound Editor.
If necessary, display the Trim & Fade view by clicking Trim Fade.
Move the play head to the beginning of the section you want to use as your ringtone, either by clicking Preview or by clicking the waveform.
Click Set Start.
Move the play head to the end of the section you want to use as your ringtone.
Click Set End.
Click Create Ringtone.
Specify a file name and location for the new file, and click Save.
To exit from Quick Sound Editor, click Close.
The ringtone is added to the All Music > Ringtone Smart View.
Solved!
Go to Solution.

Hi and welcome to the forums,
Here are some alternatives in the thread:
http://supportforums.blackberry.com/rim/board/message?board.id=8300&thread.id=10501
Please let me know if this helps!
Thanks!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

No sound on sb live24 created fi

Similar Messages

Maybe you are looking for