No Sound on U305-S7467

Hello All,
I'm getting a Red X next to the speaker in the taskbar, when I put my cursor over the icon I get No Audio output Device is installed this happened after reinstalling Vista Home Premium. I went onto the Toshiba site and got the latest Realtek Audio driver which didn't do anything after installing it. Also, I noticed that when I go to the Device Manager theres no section for Sound, Video, or Game Controller. Any suggestions? Thank you!

thank you for your reply but I have also tried that which worked initially but now does not solve the problem! When it reboots I get a message saying the driver installation failed. There is another thread on the forum I have since found which seems to think it is a problem which occurs after installing service pack 2 (which is what I did!) and there is no known solution as yet. Would appreciate if anyone could disprove that theory though! Thanks

Similar Messages

No sound at U305 S5077

No Audio output Device is instaled after Vista Home Premium atualization SP2. I've already gone first to the Toshiba Support Download and after to the Realtek web page and got the latest driver and instaled one after another but still not working. Help.

Informations I picked up from de Problem Report. Anyone can Help?
Description
Windows was able to successfully install device driver software, but the driver software encountered a problem when it tried to run. The problem code is 10.
Problem signature
Problem Event Name: PnPDeviceProblemCode
Architecture:    x86
Hardware Id:   hdaudio\func_01&ven_10ec&dev_0260
Setup class GUID:       {4d36e96c-e325-11ce-bfc1-08002be10318}
PnP problem code:      0000000A
Driver name:    RTKVHDA.sys
Driver version: 6.0.1.5783
Driver date:      02-03-2009
OS Version:     6.0.6002.2.2.0.768.3
Locale ID:        1046
Extra information about the problem
Bucket ID:       467191634

Recovery/Windows vistas

Hi everyone,
I have a Satellite S305-S7467, after several reboots, needed a Recovery. After inserted both disc, it went to a windows Boot Manager page and is asking me to install the windows installation disc.
Because it have a pre-install windows vistas(32), I don't have the disc. I'm still able to see the activation for the windows vistas underneath the laptop.
How can I get a disc or download the software. I couldn't find anything under the download tab on Toshiba web?
Thank you,
Gus

Satellite U305-S7467
Your model came with recovery discs, Gus. They enable you to restore the hard drive to its original out-of-the-box contents.
If you've lost the discs, obtain them from Toshiba.
Order Toshiba Recovery Media
-Jerry

U305-S2804 AUDIO DEVICE FAILLURE

My U305-S2804 lost sound driver and the speakers does not work. I installed the driver from CD and nothink. I downloaded the driver from this page and nothink. The speakers some times work when I start the laptop. In SOUND windows / PLAYBACK shows NOT AUDIO DEVICES ARE INSTALLED.

Wilmer wrote:
My U305-S2804 lost sound driver and the speakers does not work. I installed the driver from CD and nothink. I downloaded the driver from this page and nothink. The speakers some times work when I start the laptop. In SOUND windows / PLAYBACK shows NOT AUDIO DEVICES ARE INSTALLED.
Try to update the BIOS.

No audio & No Sound Folder

I lost my sound last week and I tried going to device manager to get to sound. However, there was no audio folder. I'm going crazy over here. I have a Toshiba Satellite U305 S5077. I even used the recovery disc and nothing. Can anyone help me? I really need sound because my autistic son uses software for learning. Thank you!

Ok I fixed my sound on my laptop... I just installed hardware for realtek and then took my battery out for the whole night and put it back in and I got sound...

U305-S5077: Audio is not working

Hello,
   My toshiba laptop's audio is not working. I tried downloading the driver online, rebooting the computer to its factory default setting, and looking for other solution online, but I can't seem to get the sound working. When I go to the device manager, the sound icon is not there even after downloading the driver and restarting the computer. I don't know what else to do. Please help. Thanks.
Christinne

Satellite U305-S5077
One of these drivers, Christinne? May as well try both.
   Realtek Audio Driver for Windows Vista (Version: 6.0.1.5473)
   Realtek Audio Driver for Windows Vista (Version: 6.0.1.5420 Logo)
When I go to the device manager, the sound icon is not there
On the other hand, when the device is missing from Device Manager, it normally indicates a hardware malfunction.
-Jerry

No Audio Output Device message on u305-s5077

I am showing the "NO AUDIO OUTPUT DEVICE" message. I have followed a few of the posts for similar laptops and and tried downloading new drivers which don't seem to be working.
In Device Manager, isn't there supposed to be a "sounds" tab or something to that effect? In System Devices, I see High Definition Audio Controller which says it's working fine.
Any suggestions to get Sound going again would be greatly appreciated.

Satellite U305-S5077
In Device Manager, isn't there supposed to be a "sounds" tab or something to that effect?
Look under Sound, video and game controllers.
In the meantime, try reinstalling a driver. Try them both.
Realtek Audio Driver for Windows Vista (Version 6.0.1.5473 - Released 01/29/08)
Realtek Audio Driver for Windows Vista (Version 6.0.1.5420 Logo - Released 06/05/07)
-Jerry

Needed all WXP SP2 drivers for Satellite U305-S2808

Hi,
I have installed win XP service pack 2 in Satellite U305-S2808. How can get all drivers for it ?
I appreciate your help.
regards,
Saleh

Hib
The Satellite U305-S2808 seems to support the Intel Graphics card X3100 with 64MB-251MB dynamically allocated shared graphics memory.
The driver could be found on the Intel page or on the Toshiba European driver page.
Check other U300 notebook series!
The sound driver seems to be from Realtek.
So you could find it also on Realtek website!!!
Cheers

Realtek audio, U305-S5077 Laptop, Windows Vista

OK, so I've had this computer for two years and the sound keeps quitting. Anyone know what the problem is and how to fix ? Systemic problem.

Satellite U305-S5077
Most likely failing hardware, but it can't hurt to reinstall the driver.
Realtek Audio Driver for Windows Vista
-Jerry

Lock ups and sound looping!

I remember reading something here about people having trouble with their systems locking up and then getting a loud static noise then a sound loop when playing games.
I am getting this about 2-3 times a night now and it is driving me nuts, I do not have temp problems of any sort and I have all of the latest drivers for everything on my system.
Any ideas?
Specs in sig

Set your PCI/AGP Freq to 66.66/33.33MHz.
Increase your DDR Voltage to 2.7~2.8v.
Check if you have any background programs causing all high CPU load times while gaming.

My downloaded text sounds do not show up under the sounds tab in settings after installing 8.1.1. can someone help me please?

i downloaded a couple text tones and since installing 8.1.1, they will not show up under the sounds tab. in fact, they do not show up in my recent purchases on itunes, but when i go to buy them again, it says that i have already bought this tone. I just want to use the tones i paid for as the tones on my phone. not asking much.... thanks for the help. i hope someone can help me get the tones working. thank you.

This was happening to me too but only for some of my songs. I have a mac so I dunno about PCs, but for most of my ringtones I had to create an ACC version in itunes to make them short enough then turn that into a m4r and those all worked fine. But if the song was already short enough and I didn't create an ACC version and just turned the original into a m4r, then it wouldn't appear in my itunes.
so if you're on a mac:
1. go to get info, options, pick when you want the song to start and end.
     Has to be pretty short to work, 30 second or less is good
     if it's already short enough that's fine
2. right click and click 'create ACC version'
     a copy with the length you put in will appear, drag that into a folder or whatever and just type in m4r where m4a would be
     still make an ACC version even if it's the right length
Hopefully this helps someone else.

When i login to my account and it takes me to the desktop, the error sound plays, then the rainbow wheel appears, and finder immediately stops responding

It started yesterday when i was listening to itunes when all of a sudden the music stopped playing and i had to hold down the power button to shut it down and reboot, and then, when i logged back in, the error sound played, and then finder opened up, but the window was grayed out like i had another app selected, bu i didn't, so i tried to open up itunes and the icon started bouncing and then it stopped midbounce and i had to reboot again because finder wasnt responding. now when i log in, the error sound plays, and finder immediately stops working and then i have to reboot again because i cant click anything and i cant properly relaunch finder. please help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Loading sound clips in my swing application

I have searched all the forums, din't find what i want.
I have many small sound files to be played in my application. Even on mouse Pressed, Drage etc etc....
Now I was looking for a better way of Loading the Sound files in memory as the application starts.....
If I use the Clip Interface of javax.sound and initilize them and open a stream, invoke the open() method, and store it in hashmap. So that when ever i need that file i will lookup for that clip and trigger the start() method which actually plays the sound. IS the approach the right approach, will not the Cip object keep the IO handle open, I have nearly 40 Clips to be loaded.
Can any one suggest me the better way of implementing this.
TIA
Zoha

As far as I know,there is no facility for detecting mouse scrolling wheel in JDK 1.3.
Check it in the later releases of JDK.

Problem with sound in my Torch 9860

HI, i have been using Torch 9860 since about a month, am facing a problem since last 20 days. the problem is the sound suddenly goes off. everything else is functional , its just that i cant hear ring tones , cant hear the person talking on other side, if dialled. Every thing goes fine when i open the backcase, take the battery out and restart. This keeps occuring more than 5 times a day. Feeling miserable.. hey could anybody advise me how to overcome this problem.

pkvinayjain wrote:
HI, i have been using Torch 9860 since about a month, am facing a problem since last 20 days. the problem is the sound suddenly goes off. everything else is functional , its just that i cant hear ring tones , cant hear the person talking on other side, if dialled. Every thing goes fine when i open the backcase, take the battery out and restart. This keeps occuring more than 5 times a day. Feeling miserable.. hey could anybody advise me how to overcome this problem.
What is your Operating System loaded to your device? Look at Options > Device > About, third line down beginning with a "v.7.0.x.xxx", What is yours?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Help with sound to LCD TV when using HDMI

I would love any assistance with a problem I am having. I have a new mac mini with a 40" Proscan LCD. I am using a mini-DVI to HDMI adapter and am getting great video - 1080. My issue is that via Keynote I need to get sound to the LCD TV. It is coming through the mini speaker - what do I need to do to get the sound over to the TV? Any assistance would be appreciated!

Welcome to the Apple Discussions!
The user guide which came with your TV should cover the issue in the different connections available for your unit.
DVI is video only. HDMI is audio and video. If you are using an adapter to connect DVI to HDMI there is no audio because of this. So to connect a Mac mini with a DVI to HDMI adapter you will also need an audio cable to run the audio from the mini's audio outport to an audio inport on the TV. This is why I refer you to the user guide for your unit, because it should point out the correct port to use on the TV, as well as point out if you have options for using analog or digital audio. The mini's audio ports can do both.

No Sound on U305-S7467

Similar Messages

Maybe you are looking for