No sound on video cature (fx5200-vtd128)

Does anybody know how to add sound to the video-in?
I'm watching the video from the MSI Media Center Deluxe II. There is just no sound.
My soundcard is a soundblaster128.
Ports include:
line-in
microphone
line-out (front) jack
auxiliary in\line out (rear) jack

ME VERY STUPID.
I tried both the Line-In & Mic ports before I posted.
Unfortunately, I didn't try looking to see if the plug was in the audio out on the back of the VCR. the plug must have come loose.
Now I have the VCR sound coming over my PC speakers, but i seem to be having problems with MSI Media Center Deluxe II.
I was able to save 2 video recordings. After that, I go to record and it asks me for what I want to name it, but the clip never appears in the list.
I also cant figure out a way to delete the 2 previously saved recordings.
Any help would be greatly appreciated.

Similar Messages

Help with FX5200 VTD128 video capture

Hi all,
Just got this card - works great except video capture. When I try to use Windows Movie Maker, I get a message saying that the device is not responding, close any applciations that may be using the device & try again, then a message saying the device could not be used because there was an error starting the device. I have used MSI Live Update to get the latest drivers for this card. Also, I see a nVidia TV Tuner in my Control Panel - is this related to my problem?
Thanks!
Asus A7V
1.25 Gb PC133 SDRAM
FX5200 VTD128
Audigy 24-bit w/1394
LG DVD-Burner
1 x 40 Gb 7200RPM HD
1 x 120 Gb 7200RPM HD

Just a thought - had a friend with an FX5900 on an nForce chipset which would not show anything on the display. Another VGA card put in its place had the same problem. The mobo (an MSI) had two jumpers to set it in safe mode (100Mhz bus speed). After flipping these into position and turning it on there was the display!!
Reset items in BIOS and jumpers and the system went on without problem. Maybe your board has the same jumpers.
Just a thought!

Fx5200 VTD128 Screen flickers using video in?

Hi, I just installed a MSI FX5200 VTD128 video card on a ASUS A7N8X deluxe motherboard. I used the MSI Utility to download their latest drivers. I am running WinXP. The problem I have is I run the video out from my satelite receiver to the composite video in on the video dongle. Using the MSI media center Watch TV mode the screen flickers and is almost unwatchable. I also tried hooking my VCR to the same input and had the same problem. I plan to get a better patch cable but anyone have any other suggestions?
Thanks

I had the same problem with my 5600VDTR 128Mb, it seemed to be a conflict between the 2.03 (msi) wdm drivers an the 45.23 (NVIDIA) VGA drivers. Using the msi 45.33 drivers cured it for me.
However, I am now using the latest 2.13 VIVO drivers from Nvidia with the new Forceware 52.16 nvidia graphics drivers and everything works great!

FX5200 VTD128 problem

Two weeks ago, I bought the new PC components and I have following problems: Symptoms: System stops for 2 seconds, and then monitor blacks out for approx 0,5 second. It happens in different programs. I downloaded new VGA 53.03 drivers from MSI web side, I downloaded new Mainbord INF file. Please help me with advice. Is it the hardware VGA card problem?
MOBO: MSI 875P Neo-FIS2R
P4 2,4GHz
VGA: MSI FX5200 VTD128
TV card: MSI TV@nywhare Master
RAM: 256 MB Apacer 2,5
HDD: 80GB
Windows XP HomeEdition, SP1

Also sometimes there are some color blocks on sreen, and I think that generally card is not powerfull as it could be.
MOBO: MSI 875P Neo-FIS2R
Bios: V 1.9 112603
P4 2,4GHz
VGA: MSI FX5200 VTD128
TV card: MSI TV@nywhare Master
RAM: 256 MB Apacer 2,5
HDD: 80GB
Windows XP HomeEdition, SP1
Power Supply: (DC Output)
+3,3 V 14A
+5V 25A
+12V 10A
-5V 0,5V
-12V 0,8A
+5sb 2A
IRQ
ISA 0 System timer
ISA 1 Standard 101/102 – Keyboard PS/2
ISA 3 COM2
ISA 4 COM1
ISA 6 FFD
ISA 8 System CMOS/real time clock
ISA 12 PS/2 Compatible mouse
ISA 13 Numeric Data processor
ISA 14 Primary IDE channel
ISA 15 Secondary IDE channel
ISA 20 Microsoft ACPI –Compliant System
PCI 11 Intel 82801EB SMBus Controller –24D3
PCI 16 Intel 82801EB USB Universal Host Controller –24D2
PCI 16 Intel 82801EB USB Universal Host Controller –24DE
PCI 16 NVIDIA GeForce FX5200
PCI 17 MSI 8606 Audio Capture
PCI 17 MSI 8606 Video Capture
PCI 17 SoundMax Integrated Digital Audio
PCI 18 Intel 82801EB USB Universal Host Controller –24D7
PCI 18 Intel PRO/1000 CT Network Connection
PCI 19 Intel 82801EB USB Universal Host Controller –24D4
PCI 19 Soft56 Data Fax Voice Speakerphone CARP
PCI 21 VIA OHCI Compliant IEEE 1394 Host Controller
PCI 23 Intel 82801EB USB2 Enhanced Host Controller –24DD
I could not find any information about AGP Voltage for MSI FX5200 VTD128 card. What Voltage should be set up for AGP slot in BIOS or in Core Center?
Thank you for helping me.

Can a MacBook (Early 2008) Support both sound and video to 1080p HDTV by Mini-DVI to HDMI cable?

Can a MacBook (Early 2008) Support both sound and video to 1080p HDTV by Mini-DVI to HDMI cable?

The mini dvi on the MacBook will only support video, in order to get audio you'll need to a cable from the sound out port to the sound in port on the TV.

How do you get sound and video from a macbook pro (before 2010) onto a 2010 toshiba 40" tv?

Any help on connecting a macbook pro (late 2009) to a 2010 toshiba 40" for both sound and video? I have the mini-hdmi cable, but have no idea about running sound through the tv. I can use the headphone jack, but don't know where to connect it to on the back of the tv. Am I supposed to change any settings on the tv or computer to allow the sound to go through the tv? thanks for any help.

You need a stereo mini to RCA break out cable.
https://discussions.apple.com/message/16276201#16276201

Loss of sound and video playback on ENVY X2

Every so often, more often than I would like, my HP Envy X2 loses sound and video playback capabilities; any ideas anybody? The concept of this machine is great and have had it for the past 9 months but this loss of sound and vision is so unpredictable and frustating...

Hi Brumage,
I saw your post regarding the sound and video issues and I will be happy to help. Do you get any error messages when this happens? Have noticed if it is a particular site like YouTube or program that you are using when the issue occurs or does it occur on all programs? When you restarted the Envy X2 does the issue go away?
I would start by suggesting that you make sure all updates have been installed through HP Support Assistant and Windows Update.
What operating system are you running? What is your product number?
Find your product number on a notebook:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
Finding your OS:
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Docked iPod only outputs sound during video to TV

I have a 5G iPod in an Apple dock, connected to my TV using a Monster audio cable and an S-Video cable. For some reason, it only outputs sound during videos or a photo slide show - not at all for music only playback. I'm baffled! Any idea why? It's a Panasonic plasma, and I've tried three different inputs. None work for music, but video is fine.

The iPhone 4, unlike iPod, doesn't ask you to set for PAL or NTSC. In fact, in the SETTINGS/Video menu it only asks if you want to "Start Playing From Beginning", "Closed Captioning" and "Home Sharing". I was surprised it had no settings like the iPod at all.

I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

Recurring theme with the 4s losing alerts except for the phone ringing. Most complaints seem to center on the 7.1 upgrade. The fix is dodgy, putting in a charger, playing a you tube video then pulling out the charger and wiggling it until you get the sound back. When you get the sound back, the volume buttons start to work again. Alternate solutions involve cleaning the docking port with a toothbrush, running a pick over the electrodes etc.

No sound or video in Finder Preview window anymore

Hello everybody,
My hard drive recently crashed and I had to get a replacement drive, reinstall OSX, and migrate my backup clone back to the hard drive with SuperDuper. Everything is running fine, except for some reason I can't hear any sound, or see any video when previewing movies or mp3s in preview. The time marker moves to the right, but there is no sound or video. Sound works in itunes and in Quick time, but not in the preview?Volume is up all the way. I tried some sort of suggested adjustment in the Audio Midi utilities screen to no avail. Any suggestions

Ok, i figured out what the problem was. For some reason I had to install Flip4Mac to make the previews work again. Hope this helps everyone else.

No Sound on Videos

Ok, so I have a few videos I want to put on my ipod. Well actually I have put them on, but, only one works. I know that you have to convert the files into m4v before putting them on iPod, and that's what I have done. However, previous to the conversion only ONE of those files was an MOV file (.mov) and the rest were mpg/mpeg . The ".mov" video worked on my iPod, sound and video. The others didn't, only the video part, no audio. Why is this? I know that there have been a lot of posts relating to this, but I found my situation to be a little more specific and decided to give it a shot, since the other sweren't so much in my "ballpark" of problems.
Thanks

iMovie does not work with muxed MPEG-1 and MPEG-2 clips
When using any version of iMovie, please note that you cannot import muxed (multiplexed) MPEG-1 or MPEG-2 video clips into projects. If you try, one or more of the following things can happen:
iMovie refuses to import the clip and displays an alert instead (such as "File could not be imported because QuickTime could not parse it. -2048").
iMovie allows you to import the clip, however:
You won't hear audio on playback.
You won't see video on playback.
When you export the project to QuickTime, iDVD, or a connected camera, the clip no longer contains audio.
When files are muxed, they contain interleaved audio and video tracks (they're mixed together instead of stored in separate tracks). Because of this, iMovie cannot support them.
If you want to find out if a movie file is "muxed," follow these steps:
Open the original movie file in QuickTime Player.
From the Window menu, chose Show Movie Info.
Click the More Info disclosure triangle in the Movie Info window (if it's closed).
Note the entry next to "Format."
If the format is "MPEG1 Muxed" or "MPEG2 Muxed," you can't use the clip in iMovie. You may want to consider using a third-party utility to convert the clip to DV format for use in your iMovie project.
Note: If you have the QuickTime MPEG-2 playback component installed, it may not change the issues described above. Editing muxed MPEG-1 and MPEG-2 files is not supported in iMovie, even with this component installed
Understand about iMovie Now? No under no circumstance should you convert twice. Quality will go downhill and fast. I convert to MPEG-4 ASP (Simple Profile). This is why all my videos continue to play correctly even after the new IPOD updater. I am not a MAC user so I will refrain from suggesting any programs. Folks have mentioned Handbrake although. Learning how to identify the different video formats and the different standards within each is important to success and getting your IPOD full of videos.

I get sound no video when using AirPlay. Any ideas?

I get sound no video when using AirPlay. Any ideas?

Do you get an "HDCP error"?
Since the last ATV software update, I have had problems playing You Tube content from the iPad to the ATV using airplay, yet the same content from the You Tube channel on the ATV plays fine. I get the dreaded "HDCP error" which is nonsense, as YouTube content does not have this protection. Netflix also gives the same error. (I have posted seperately about this problem.)
I have had a couple of years of fault-free playing with my setup, the only thing that has changed is the Apple ATV software. Ergo, they need to fix whatever bug they introduced. None of the recommended "fixes" have worked.

Watch TV with a FX5200 VTD128

HI
I want to know if I can watch TV with a VGA Card FX5200 VTD128. If so, How can I do it?
Thanks

Hi there,
I really know what u want to do, so take a look at this post of mine, it may help u.
https://forum-en.msi.com/index.php?threadid=38078&sid=

My IPOD WONT PLAY SOUND ON VIDEOS

i just got an ipod and i can play videos but there is no sound. the videos i want to play are music videos i have downloaded and ren and stimpy videos and meet the barkers tv series. i have clicked convert to ipod in itunes and they convert but after they convert they lose there sound on itunes and when i transfer them to the ipod there is no sound. has anyone else got this problem or have an idea to correct it. please help cuz i have minimal ipod / computer knowledge and i need all the help i can get thanks

i downloaded a few videos and they played fine on
itunes. BUT, they couldnt be added to my ipod. i
followed instructions to convert them for my ipod but
the converted videos dont have any sound. when i put
the converted videos on my ipod, they wont play- they
show up like a song- white background, name of song
and band, and, instead of the album cover, there is a
still frame from the video. is there something wrong
with the videos??? help!!!!
That sometimes happend to me when I converted the videos using Itunes....So, I use this converter instead...
Videora Ipod Coverter
http://www.videora.com/en-us/Converter/iPod/
It'a a free program to download and your videos should play fine in your ipod once you use this to covert them.
As for the videos not playing for you, it could be the fact that you coverted them using Itunes, so try the above converter instead and that should work okay. If that still doesn't work for you try getting your settings back to their original state - Go to 'Settings' and then 'reset Settings' and this will put your settings back the way they were once you bought the ipod originally. The videos should definately play in your ipod then.
If you need anymore help, just let me know, I know how annoying it is when the videos won't play properly!!!
Good luck with it!
Dell Windows XP Pro

Can't play sounds on videos when using 'Facebook', music plays

On my wife's iPad she cannot hear sound from video clips when in 'Facebook', but she can hear sound when she opens iTunes. Any help, suggestions?

Sorry I don't. It just happens at random and usually most YouTube videos and other similar styled videos. I'm not really a tech guy but it just seems like there is something else going on. Everything else on my PC works fine except when I want to open a video using flash. It isn't just one site or one video it is nearly every flash video and it's almost like they're loading one at a time except in no order if there is more than one tab. Even if it is just one video, it takes a long time to load.
Imagine going to YouTube to load up a vid and the controls or progrss bar never load, it just stops and only a solid black box is displayed. Eventually the controls load and it seems like it's about to play at any moment.. only the waiting lasts 5 minutes. Even if you refresh it still has to do this all over again.

No sound on video cature (fx5200-vtd128)

Similar Messages

Maybe you are looking for