No Sound On Video When Converted

Hey kids,
been trying for months to get my videos that i have downloaded to play on Ipod. now my flatmate has the same issue. really stressed out here with it...
Any help??

1. What iPod do you have?
2. Which software do you use?
3. It would be helpful to fill in your computer info in your profiles so that I could now if your running Mac OSX or Windows?
4. Have you converted to the right resolution?
Check out my earlier post on handbrake (Mac) and Vieora(Win) here:
http://discussions.apple.com/thread.jspa?threadID=657719

Similar Messages

  • I get sound no video when using AirPlay.  Any ideas?

    I get sound no video when using AirPlay.  Any ideas?

    Do you get an "HDCP error"?
    Since the last ATV software update, I have had  problems playing You Tube content from the iPad to the ATV using airplay, yet the same content from the You Tube channel on the ATV plays fine. I get the dreaded "HDCP error" which is nonsense, as YouTube content does not have this protection. Netflix also gives the same error. (I have posted seperately about this problem.)
    I have had a couple of years of fault-free playing with my setup, the only thing that has changed is the Apple ATV software. Ergo, they need to fix whatever bug they introduced. None of the recommended "fixes" have worked.

  • No audio channels (only video) when converting/exporting media formats

    Hi,
    Last year i bought a license for quicktime 7 but i still have problems when converting.
    Als with the new iTunes7 the problem still relies.
    When i am converting a mpeg file to the m4v in iTunes the problem is the same.
    It doens't matter which media format i get, but after the conversion is done... there are no audio channels!
    When u look at the movie info option in the quicktime menu, you can see an video channel, but no audio. the orginal files do get video and audio channels...
    about 6 months ago i contacted apple support for this, but the problem still relies..
    Does anybody know a fix or maybe Apple can investigate this important bug!! In the past i have used Videora iPod coverter that does the job correct and muchhh faster, but i want quicktime to do that!!!
    Regards,
    Rick Beemsterboer

    Quicktime has never exported the sound from muxed mpeg-1 or -2 files: QT Mpeg Limitations
    You can run a separate demuxer to get the audio stream out or just use this freeware that exports both video and audio from mpegs to other formats: Mpeg StreamClip

  • How can I get my ipad Pages app to keep video when converting to epub file?

    I am trying to create a epub file to be opened in  Ibook using Pages on the IPad. I have inserted a video and when I go to export to Ibooks it gives me a warning that video has been converted into an image.  I have created this same video on a desktop computer and been able to email and open it in IBook on my IPAD.
    Is there a way to have video embedded on the IPAD Pages app to be able to be published as an epub and be able to be opened later.
    Cassy Mate

    I'm wondering about this also. Even when importing very small videos it converts into pictures... Hope someone can shed some light on this matter for us!

  • Can't play sounds on videos when using 'Facebook', music plays

    On my wife's iPad she cannot hear sound from video clips when in 'Facebook', but she can hear sound when she opens iTunes.  Any help, suggestions?

    Sorry I don't. It just happens at random and usually most YouTube videos and other similar styled videos. I'm not really a tech guy but it just seems like there is something else going on. Everything else on my PC works fine except when I want to open a video using flash. It isn't just one site or one video it is nearly every flash video and it's almost like they're loading one at a time except in no order if there is more than one tab. Even if it is just one video, it takes a long time to load.
    Imagine going to YouTube to load up a vid and the controls or progrss bar never load, it just stops and only a solid black box is displayed. Eventually the controls load and it seems like it's about to play at any moment.. only the waiting lasts 5 minutes. Even if you refresh it still has to do this all over again.

  • No sound in videos when played in iTunes or on iPod

    I can get videos onto my ipod but there is no sound when i listen to them and also if i try to view them on iTunes i hear nothing either. But if i play it through Windows media player or on Quicktime then it will play sound... anybody know whats going on? all help appreciated!

    If you used the 'Convert selection for iPod' feature in iTunes I had the same problem... there was sound from them in iTunes but not on the iPod
    Chris

  • Videos when converted have no audio

    i have a ipod classic...just bought it...i have alot of videos in the quicktime format...when i convert for ipod it converts the file however there is no sound...i saw someone else had the same problem...has there been a solution???
    help!!

    Quicktime or Quicktime Pro (which iTunes uses) don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    See this for help: Guide to converting video for iPod (Mac/Windows).

  • Lost images/sound clips/video when changing langua...

    i've never had this problem or any similar problems in the 4 months i've had this phone. today i changed the language from english to tagalog (pilipino), and when the phone restarted it had deleted all of my images (bar one), videos and sound clips (bar one). that's all i've noticed it has deleted so far, my messages and contacts are still there. i've never had problems with it prior to this happening... is there any way of recovering the data?

    I've also got same problem. Interestingly enough, background music added to DVDs title page plays OK on the burned CD (everything previews perfectly). However, go to 'play' the burned DVD, and while the video is there, the audio tracks are silent. Source material is an iMove project, and audio tracks are all AIFF files.
    Also tried physically burning the DVD with Disk Utility. DVD burns OK, but on playback (both on home stereo DVD player, and on Mac), title slide and background music works fine, but after selecting to play the movie, the audio tracks are all gone... only silence This is with burning directly from iDVD, or by saving the project as an img file, and then burning it to DVD via Disk Utility.
    Any clues appreciated!
    iMac   Mac OS X (10.4.10)  

  • Adobe Premiere - blurred video when convertering from MOV to AVI

    Hey!
    When I exporting my video I made with my iphone (.MOV) to .AVI then the videos quality gets worse that it should be.
    What does that depends on and what can I do to fix it?

    What does that depends on and what can I do to fix it?
    The phone. Don't use the phone to change the wrapper. Use a converter or better yet, use a video camera. Use a phone to make calls.

  • No video when converting M4V to FLV

    Hi,
    I ripped a DVD with Handbreak by using their HighProfile. The output produced was an 11 minute m4v video encoded with x264. I tested this video, and it works just fine. Now when I try to convert it with AME 4.2 I tried the following presets:
    F4V same as source (Flash 9.0.r115 and Higher)
    F4V Web Large, Widescreen Source (Flash 9.0.r115 and Higher)
    F4V Web Medium, Widescreen Source (Flash 9.0.r115 and Higher)
    Every single test resulted in a black screen with no audio for 164 minutes.
    Now this computer has a Adobe Web Premium CS4, but it also has some sort of AME 5.5 trial.
    I wouldn't expect them to conflict with each other, but I don't know.
    Any Ideas?
    Thank you,

    Instead of ripping to such a highly compressed format, and then further compressing it again, try this:
    http://www.videohelp.com/tools/XviD4PSP

  • IPhone video, when converted is upside down?

    Hi - I can't find too much on this.... When I record video on my iphone and import to Aperture it plays fine. When I convert the .mov file to mp4 via various convertors, the video always plays updide down??!!
    Anyone?
    TIA

    You need to address that question to the developers of the converting software you use. 

  • Strobelike Video when converted from 1080i - 720x480

    I've been running into this problem quite a bit... my opening segment which was made on Adobe After Effects is having a strobe-like interlaced look during periods of quick movement.
    I was instructed that the issue would be resolved by overlaying the 1080i Timeline onto a Standard Def Timeline ... but that didn't seem to fix the issue (when viewed on a television).
    Can anyone explain the technicalities of why this issue periodically comes up? I know that a good part of the problem is that I am on FCP 5.1.4. However, I know it can be manually fixed if I can get some insight into what causes this problem.

    Sounds like a field order problem.
    Try reversing them (if set to upper - try lower ... or vice versa).
    x

  • Why can't I import sound with video into iMovie from digital camera?

    This is disturbing. I have a digital video camera that took great video + sound. I import into iMovie (using my DV cable that came with the camera) and get video but no sound.
    Now, in the past the sound came in, but no longer. Any and all advise is requested. I have to make number videos of lectures starting Wednesday evening and have to be able to provide video with audio.
    Thanks.

    Try importing video shot with the camera's internal
    microphone. If that doesn't work either, the mic is
    not the problem.
    I have no problem importing sound with video when using the internal video camera mic. No problem (other than sound quality issues with the speaker being 40 feet away from the camera's internal mic!
    But I can play back the video made with the external mic in the camera and the sound is stunningly clear, crisp and loud. It's just a matter of getting it out of the camera into my Mac. I don't think it's the microphone; it must be the computer.
    I just find it sad to believe that Apple's software is so limited--even in Final Cut Express HD.

  • No sound when converting video to iPod compatible

    When I right-click in video to 'convert selection for iPod' it converts it, but with no sound. My other videos in iTunes (6.0.3.5) play fine and with sound, but not the converted ones. What to do?

    I have seen some advice on "muxing" but since I don't have a video ipod, haven't paid much attention.
    You might have better luck in the 5th generation video iPod forums:
    http://discussions.apple.com/category.jspa?categoryID=157

  • Trouble shoot Issue in QT Pro: I have sound but no Video after convert

    I hope this hasn't been answered somewhere else if so I apologize. I have been using QuickTime Pro to convert .mkv files to .mp4. I muxed them with MkvMerge. Then I open them in QuickTime Pro and export as a mp4 for Ps3 playback. They are 1080p Hd movie files and I have had no problems until today. I have one mkv that when converted to mp4 plays only sound and no video. Its just a black screen. I checked the muxed files when I open them in QT Pro and they work fine so its only after I convert the .mka to .mp4 that I have the video issue. I've already done a few other files so I don't know why this isn't working? Any ideas?

    It could be a 'difficult' form of Matroska file. FYI Matroska is just a container like MOV or AVI, and some mkv have the video encoded with Real Video Codec (RV9 RV10). Perian+QT can't decode this, but VLC will play .mkv files just fine on OS X, as long as they don't use H.264!
    It's a bit of a lottery until Matroska decide to support the Apple platform. I have found this:
    http://mkv4mac.free.fr/index.php?lang=en&p=lec
    which may help.
    But there may be another workaround: 1. Get Info the mkv file
    2. Change to extension to wmv. Save as wmv and that could work better.
    Or this link may be helpful:
    http://www.squidoo.com/mkv-converter-mac
    Recently, a poster (ZachP14) suggested this:
    "There's a program called Plex that runs .mkv files awesome on my 2.0 ghz macbook."
    http://www.plexapp.com/
    Maybe worth a try?

Maybe you are looking for

  • IWeb 1.0.2 modifications in iWeb 2.0.2

    In iWeb 1.0.2 I make modifications in the .js files to delete the controller and autoplay and loop the music for both Macs and PCs and modifications in the slideshow.html files to prevent the slideshow from looping, remove the reflections, and change

  • FORM LAYOUT DESIGNING

    Hi, Can anyone suggest me the approach to go for FORM LAYOUT DESIGNING in ISU? As i need to convert existing client Letters into ISU Forms(proabably smart forms). Secondly, if a client is having different body type (of letters) but same variable data

  • How to Disable Syntax Checker for DDL Generation

    Would like to include shell script commands before a create table statement. Modified the .xdb but PowerDesigner does not recognize this code as it is not native to the database. Is there a way to disable the syntax check so that the create table scr

  • Installing i tunes with vista

    i'm trying to install i tunes i have windows vista but i always have the same error message saying that there was an issue reading the package and the error number is 2738 can somebody help please i deleted the temp files and try to reinstall but sam

  • Anyone having issues with large Import from Catalog w/ LR 5.3?

    I'm trying to consolidate into a single master LR catalog from several different machines, and keep having one of the three Import from Catalog operations I need to do fail. I've had LR 5.3 fail to do a large (5000+) item Import from Catalog twice no