No sound on youtube or any other webpage
When I go to a website such as youtube.com or any other site that plays sound, it only plays through the speakers on my monitor. The speakers in my monitor do not work very well, so i bought a Edifier Surround Sound System. The surround sound works with
my Windows Media Player but not with webpages that play music or videos. I've already went through my Internet Options and the multimedia settings are checked, nothing is muted. Im so frustrated! Help!
Hi,
Thanks for posting in Microsoft TechNet forums.
Did it work before? When did this issue begin to occur? If it works before, system restore can be under consideration.
Please go into Internet Options>Advanced tab scroll down to Multimedia and make sure that "Play sounds in web pages" is check, click Apply/OK.
If it is already checked, uncheck it, click Apply/OK then go back and recheck it, click Apply/OK.
Meanwhile, does the sound work in the following website?
http://www.microsoft.com/Windows/windows-7/videos-tours.aspx
Meanwhile, it seems you have two output devices, please go to control panel-> sound->under playback tab, set the other device as default to test
the issue.
Best Regards
Magon Liu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
Similar Messages
-
Videos won't play. Not YouTube or any other videos (just started today). I also have no sound, keypad clicks, shutoff click, etc. Are these common failures for a three year old Gen 2 iPad?
For the issue with the videos that will no longer work, try closing all apps and then reboot the iPad.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
For the issue with sounds, you have system sounds muted.
Check the side switch above the volume rocker on the side of the iPad. Flip it the other way and see if you get sound from the apps, keyboard clicks, etc.
If not, double tap the home button to bring up the task bar at the bottom. In the task bar swipe all the way to the right. Look on the far left side and see if there is a speaker icon. If there is, tap it and see if the sounds on apps come back. Then tap the home button.
You can change how the side switch works to either lock screen rotation or to mute system sounds. You can go to Settings>General>Set Side switch to Lock Rotation or mute. If you choose mute, the switch will turn off apps sounds. Otherwise you use the task bar as described above to mute those sounds.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
problem with latest version of firefox 15.0.1,whenever i download video from youtube or any other site using idm it shows only .webm format to download instead of flv or mp4.previous version works fine.also other browsers work fine.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies -
I cannot Play Youtube or any other Videos in the Browser. It says Update FLASH Player though I have updated the Flash Player to latest version. The Videos work fine in IE/Safari/Google Chrome
== URL of affected sites ==
http://
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Dealio Toolbar Plugin
4.0.2
true
[email protected]
Search Settings Plugin
1.2.3
true
[email protected]
Skype extension for Firefox
2.2.0.102
false
Java Console
6.0.02
true
Java Console
6.0.20
true
RealPlayer Browser Record Plugin
1.1.4
true
Veoh Web Player Video Finder
1.4
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.importBookmarksHTML
false
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
dom.max_script_run_time
0
extensions.lastAppVersion
3.6.3
network.cookie.prefsMigrated
true
places.last_vacuum
1274198820
privacy.popups.showBrowserMessage
false
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false -
Getting sound to load on any other computer
I've never really been great at sound in flash, because it
always struck me as being fairly complicated, but this is the first
time it's legitimately not worked for me. I used the following
code:
var soundthrust:Sound = new Sound();
soundthrust.loadSound("cannister_loop.mp3", false);
var soundhit:Sound = new Sound();
soundhit.loadSound("explode_4.mp3", false);
to load two mp3s and later play them as sound effects when
certain things occur (one's when the user presses a key, the other
when a spaceship collides with the ground. Unfortunately, these
sounds do not play on other computers, as I have loaded the
executable file published through flash to the web here:
http://valinet.com/~sheldon/climateorbiter.exe
I even tried uploading the mp3s to the same folder online,
assuming they might not be included in the executable, but alas,
there is still no sound. How to I get sound to play on other
machines? Is there a different way to create sounds (I can use
wav's or anything else if those work better) or a different way to
publish the flash document (although I dislike how viewing normal
documents in browser lets the user see the area around the stage,
unlike an exe) that will make the sound work? Thanks for the help,
and sorry I'm a bit of a n00b."kombucha284" <[email protected]> wrote in
message news:[email protected]...
> So why does sound work for me on my computer? Any idea?
Also, I can't really tell as a result if that worked or not... I
won't
> know until tomorrow at school and by then it is due...
Thanks!
Ok, I looked at it again.
To be able to control volumes of sound objects separately you
need to attach each object to a separate movieclip, otherwise your
volume control for the thrust sound will also affect the
explosion sound. When you release the up arrow to let the lender go
down
the thrust volume goes to zero so the explosion sound can't
be heard either. Secondly, if you don't use a preloader and someone
pushes the arrow keys for the thruster before the thrust
sound is completely loaded from the server you can get a missing
sound.
That doesn't happen on your local computer because the sound
loads so quickly. The slower loading of the external sounds across
the
Internet makes a big difference.
Either add a preloader or import the sounds into the library
and use a linkage name and attach sound instead. Since you are
short
on time, that's what I would do.
Also the two mp3 files are pretty small.. 47k and 25k so it
won't add that much to the file size.
1) import canister_loop.mp3 into the library
2) right click on the sound in the library
3) choose 'linkage' and give it a linkage name like
'thrustSound'
Make sure 'Export for Actionscript' and 'Export in Frame 1'
are selected
4) import explode_4.mp3 into the library
5) give it a linkage name of 'explosionSound'
6) create two empty movieclips to attach the sounds to..
this.createEmptyMovieClip("one",10); // create clip 'one' at
depth 10
this.createEmptyMovieClip("two",11); // create clip two at
depth 11
7) attach the sounds to the movieclips...
soundhit = new Sound(one); // soundhit belongs to movieclip
'one' now
soundhit.attachSound("explosionSound");
soundthrust = new Sound(two); // soundthrust belongs to
movieclip 'two' now
soundthrust.attachSound("thrustSound");
Now when you set the thrust volume to 0 for the thrust sound
it won't make the explosion sound volume zero too.
Hope that helps. I tested it and it works fine. How come you
can't test it? Don't have Flash at home?
I put the file on my website for you to test it.. click once
to activate before using the arrow keys.
http://www.kompanionkare.net/flash/lander10.html
No place to land yet?
tralfaz -
It's not just youtube but any sites where I want to watch tv shows or movies also.
Try the solutions in this article - [[Flash 11.3 doesn't load video in Firefox]]
-
Cannot hear any sound from WMP, youtube, or any other videos
I use a Vista SP2 HP Pavilion dv6 laptop. Yesterday suddenly, all sound died on me. The previous day, I had downloaded flash videos from a website called www.auditchannel.tv (this is a website run by the Institute of Internal Auditors, a
global organisation), and was able to hear the sound. I muted the speaker at that time. Yesterday, I tried to listen to the same flash videos after unmuting the speaker, but could not hear any sound. Tried playing videos on Youtube, other
videos that I had downloaded earlier, but even there no sound was audible. Then tried playing my mp3 files on windows media player but got the error message saying "Windows Media Player encountered a problem while playing the file. For additional
assistance, click Web Help."
I've tried everything listed on Microsoft Support sites. This includes:
i) going to Device manager and ensuring that all the sound devices are showing as working correctly, and all related drivers are uptodate
ii) downloading Microsoft Fixit exe files for AudioPlayback and WinMediaPlayer, running the exe files, which reinstalled WMP...
but the problem was not resolved !
Would appreciate your help to fix this issue.
One more point - Day before yesterday night, some automatic updates were downloaded by Windows Update overnight, and when I woke up my machine the following morning, I noticed that it had actually shut down and restarted. But it seemed that the auto
update files had not been fully installed. So, yesterday night, I ran the Windows Update manually, and installed all the pending updates fully. Not sure if this sound problem could have been caused by this event - ie. partial installation, then
running Windows Update again ?? The auto updates were the following:
Cumulative Security Update for Internet Explorer 9 for Windows Vista
Security Updates for Windows Vista...various
Windows Malicious Software Removal Tool - December 2013
Microsoft .NET Framework 4.5.1 for Windows Vista
ZTEMT Corporation - Bus Controllers and Ports - ZTE...various
Synaptics - Input - Synaptics PS/2 Port TouchPad
Definition Update for Windows DefenderThe internal speakers started working after uninstalling the sound drivers and restarted the machine, after which the system reinstalled the High Definition Audio Device driver, which was hitherto being used for the Headset speakers.
Today, the external speakers (the ones used by the headset) stopped working. Both the internal and external speakers
have the same High Definition Audio Device driver. Both are showing "device is working properly", but when the headset is plugged into the two jacks (in and out), the sound does not come from the headset earpiece, but from the internal speakers (ie the loudspeakers).
Any solution for this ?
My wife's machine has been having a similar, though not identical problem, since the last couple of weeks. In her
case, when the headset is plugged in, there is no sound at all, neither from the headset speakers, nor from the internal speakers.
Just to eliminate the possibility of the headsets malfunctioning, I tried using another headset, but with the same
results as above.
All these audio problems started a couple of weeks ago, after a Windows overnight update, as detailed in my opening
post under this thread. -
No sound on youtube on any browser!!
Unbelievable i get forced to download your product to watch a video on youtube only to have it get totally screwed up.Read and applied every damn "fix" for the problem and still no damn sound!!!Honestly i would love to live in the world you guys live in so i can put out a faulty or non working product and then make the people you wronged do all the damn work for you to fix it!!Because of your incompetence i cant one word of any video i try to watch on youtube all i get is dead noise.If i wanted to be a damn computer programmer or repair tech i would have gone to school to do so get off your asss and fix this all these problems.
And don't respond with another one of your useless recommended solutions that have not worked.I just want my computer running correctly and using all the functions that i pay good damn money for!''s.Turjoe [[#answer-666962|said]]''
<blockquote>
Crashes or other problems with certain multimedia content in Firefox (such as Youtube videos and Flash animations or games) can often be resolved by performing the steps in these Knowledge Base articles:
* [[Flash Plugin - Keep it up to date and troubleshoot problems]]
* [[Flash 11.3 crashes]]
* [[Flash 11.3 doesn't load video in Firefox]]
On Windows Vista and above, you can disable Flash protected mode by following the instructions on these pages:
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround
* http://kb.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3
(See [http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html this Adobe blog post] for technical details about Flash protected mode.)
For recent updates for Adobe Shockwave Flash, please update your version to 14.
Please refer to the security updates [http://helpx.adobe.com/security/products/flash-player/apsb14-18.html and Adobe Security Bulletin] for more information.
<!--Please also note that html5 may need to be enabled to view some videos on youtube [https://www.youtube.com/html5]-->
<!--[version 13]Please refer to these security issues [http://helpx.adobe.com/security/products/flash-player/apsb14-13.html and Adoble Blog post] for more information on the security update. -->
Please tell us if this helped!
</blockquote>
Nothing of the above helped. It's still happening. -
No sound on YouTube videos and others
I have read through other discussions so I am prepared!
I am using Windows XP Prof. PC 32 bit.
Hello!
I did the checking with the Adobe / Forum website - as to what version I am using in Flash: I was able to get animation - NO Sound
I copied this information in hope that you'll see what I need to do!
*** Flash10c.ocx File version: 10.0.32.18 Type: Active X Cointrol
*** 2. FlashInstall Type: Text Document
*** 3. flashplayer.xpt Type: XPT File
*** 4. FlashUtil10c File version: 10.0.32.18 Type: Application
*** 5. FlashUtil10i Plugin File version:10.0.82.76 Type: Application
*** 6. install Type: Text Document
*** 7. NPSWF32.dll File version:10.0.82.76 Type:Application Extention
*** 8. uninstall_activeX File version:10.0.32.18 Type:Application
FF Plugin Shockwave Flash 10.0.82.76 Shockwave Flash 10.1 r 82 Enabled
IE Add ons Shockwave Flash Object Enabled IE : LISTED: 10.0.32.18 Enabled
Name: Shockwave Flash Object
Publisher: Adobe Systems Incorporated
Type: ActiveX Control
Version: 10.0.32.18
File date:
Date last accessed: Today, September 14, 2010, 1 minute ago
Class ID: {D27CDB6E-AE6D-11CF-96B8-444553540000}
Use count: 243
Block count: 0
File: Flash10c.ocx
Folder: C:\WINDOWS\system32\Macromed\Flash
I COPIED THE FOLLOWING FROM THE ADOBE FORUM WEBSITE:- PLEASE NOTE ***
Re: Flash Player 10 not working in specific sites
Hi, thanks. Well the fact that you could see the animation means you have Flash Player Installed correctly and the latest version. However, I would like you to Use IE and go to Tools, Manage Addons. Then look for "Show"(very light text) and look in All Add ons for Shockwave Flash Object and make sure it is Enabled. It should also say vs 10.1.82.76. -->
***MINE IS: IE 10.0.32.18 ***
Then use FF(Firefox) and go to Plugins and look for Shockwave Flash vs 10.1.82.76 and make sure it is Enabled.
*** MINE IS: FF: Shockwave Flash 10.0.82.76 AND Shockwave Flash 10.1 r82 ***
I so not know if these answers (above) apply completely to my problem, they were very simular!
PLEASE Advise? I am not even sure if the problem is with Adobe... feeling stupid! -- Understanding all of this is difficult for me to absorb!
I would Appreciateany help you can provide, I haven't had sound in a long time. Other sounds from my file work fine.
Thank you,
Char9/26/2010 9:16pm
Pat Wellner - backwards
Hello again.
I uninstalled and reinstalled - Followed all of your advise, Thank you for responding!
This is SO FRUSTRATING!
I have had no sound for a very long time now. Not your problem, mine! - I should have not waited in dealing with this!
Restarted the computer.. here is the current info. after reinstalling:
From http://www.adobe.com/software/flash/about/
Windows Internet Explorer (and other browsers that support Internet Explorer ActiveX controls and plug-ins) 10.1.85.3
Windows Firefox, Mozilla, Netscape, Opera (and other plugin-based browsers) 10.1.85.3
Macintosh - OS X Firefox, Opera, Safari 10.1.85.3
Linux Mozilla, Firefox, SeaMonkey 10.1.85.3
Solaris Mozilla 10.1.85.3
At least their all using the same version now, IE and FF were using different versions when I checked last time!
I also visited the website you suggested for checking my Adobe settings, I found it interesting but have no clue as to what I am supposed to do there? I read the entire page, and went through each of the different settings, but don't understand how that applies to my no sound problem!
*** I am also not getting any of the Windows start up sounds, or closing etc. Does this make a difference for helping to identify the problem / SOLUTION any further?
I read Microsofts help pages, they suggested looking at my device manager, everything was okay there (so far).
I thought I had read in one of the Adobe Forums to check for Driver updates...? Do you know for which Drivers?
I did check the Realtek website - As I am using: Realtek Semiconductor Corp AC97 Audio for VIA (R) Audio Controller Dated: 12/28/2006 this date has to be wrong!
Version no. 5.10.0.6210
I am afraid of doing Anything without some kind of direction.- - - Please HELP? (Don't give up)!
Do you have Any more ideas? Or Suggestions?
YOU and your help are Very much Appreciated!
Thanks again, Char
Message was edited by: uccharisme -
any time im using the internet wanting to play videos or listen to music the sound doesnt seem to work. i can turn up the volume and hear the clicks from the volume bar but the sound will not play!! and it works anytime im in itunes store or my own library. ( used about 4 diferent sets of headphones, so this is not the cause.)
maricanavan--
That information is in the information dominic linked for you. Take a minute to really read it, OK? It's not hard. -
i have an ipod tough 3g and its like about 4 to 5 years old it works perfectly fine except the home button is abit messed up and the ipod sometimes crashes. but other than that everything is fine. so i was watching something on an app and then al of a sudden i dont see the video i can just hear it. i then think its just the app but when i go on youtube the same exact thing happens. you click to watch a video and you can hear it perfectly but you cant see anything. the screen is just black when u ONLY watch a video. this happened last night so yea.i really hope somebody can help me figure out how to fix this and whats wrongwith it:)
thanks for your time and help!
Noor .T.When it goes black do a very short press of the button on the right upper side of the phone and the screen will reappear. Make it a very short quick press.
OTOH, if you are using the speaker so you can watch the screen as you are talking when it goes dim touch the screen anywhere that it is blank and it will again go bright. On long calls you have to repeat this.
Many folks have had the same problem you described and what I have told you is the best and ONLY way around the screen going blank during a call.
JerryF -
Safari 6.0.1 not responding while opening Youtube or any other websites.
Hi,
My safari is getting frozen and am getting the noise when its trying to consume more resources (just while opening webpages). The only process that was running is safari and its started using 99% of my CPU. Can someone please help?
Sathish.Rhi,
i had the same problem after update.anyway its just permission problem on Safari directory.
1, Open Terminal
2 sudo or login as root
3, chmor 775 /Users/username/Library/Safari/ ( i did it, since i dont care about the permission on this directory)
4, u reply back happily if ur problem is solved
and i am sorry abt my language, am not english speaking and i dont know much abt mac just bought it last week.
see ya -
How do I remove and reload safari? Do I have to reload the operating system?
Install Flash Player in Safe Mode.
Shut down the computer.
Press the power button. Immediately after you hear the startup sound, press and hold the Shift key.
The Shift key should be pressed as soon as possible after startup,but not before the startup sound.
Release the Shift key when you see the Apple logo on the screen. Startup will take longer than usual.
Login to your account. Launch Safari.
Install Adobe Flash Player.
Type in this address in Safari address bar manually.
http://get.adobe.com/flashplayer/
Install Adobe Flash Player.
Once done, quit Safari and restart the computer from in the menu bar.
Once back in to the normal mode, make sure that plug-ins are allowed.
Safari > Preferences > Security > Allow Plug-ins. -
Xine codecs installed. no video on youtube or any other site.
Using suse linux 13.1. Installed xine codecs. Firefox is aware of this according to the "tools -> manage content plugins" list, and "edit -> preferences -> applications" list. I am at a complete loss as what to do. I really need to get this sorted otherwise I am going to have return to windows which is not something that I want.
Flash Player is usually required to play videos on most sites, including YouTube. It looks like you already have the latest version installed (it's listed as "Shockwave Flash" in the Add-ons Manager, Plugins category). What happens exactly? Do you get an error message?
* [[Flash Plugin - Keep it up to date and troubleshoot problems]]
Alternatively, if you have the right packages installed, you should be able to play videos in HTML5 format. According to bug 972638,
The backend right now depends on the following gstreamer modules: gstreamer, gst-plugins-base, gst-plugins-good, gst-plugins-bad and either gst-libav or some 3rd party h264 decoder (I believe Fluendo has one, but there are also others).
If you meet the requirements, then to play videos on YouTube in HTML5 format, you can
# Disable the Flash Player plug-in by setting Shockwave Flash to "Never Activate".
# Install the following add-on.
#* https://addons.mozilla.org/firefox/addon/youtube-all-html5/
# Some insist that [https://www.youtube.com/html5 joining the HTML5 trial] also works, but it's never worked for me and others.
To play videos on other sites in HTML5 format, you can
# Install Greasemonkey.
#* https://addons.mozilla.org/firefox/addon/greasemonkey/
# Install the ViewTube user script.
#* http://userscripts.org/scripts/show/87011
Note that not all sites have videos in HTML5 format, and those that do tend to serve only Flash videos to desktop browsers (which is why the above user script is necessary). -
Cant open any videos in youtube and any other sites. please help
i cant buffering or see any video content in the website such as you tube . in you tube it just says an error occured and refreshing didn't work. in some other sites the big panel for the video just didn't show up. its just blank. please help . i try installing adobe flash video and still not working
Thanks its solved by upgrading my firefox to 28 thank you. All works fine now
Maybe you are looking for
-
I am trying to retrieve what was on a lost Ipad. I THOUGHT when I signed into APple it would just BE there. All my photos, program apps installed and etc but apparently there were not compatible - one was a 6.1.0 and the other was 6.1.2. Soooo, I
-
In Photoshop Elements 12 eigener Ortner Löschen
Guten Abend Kann mir jemand sagen, wie ich bei Photoshop Elements 12 bei Eigene Ortner ein solchen löschen kann. Damit die Fotos da drauf verschwinden. Lg Speedpic
-
Can't access a value stored in a form text field
I created a small test page to try and understand how a piece of javascript works, well actually it's not working. All I'm trying to do is display the value entered in a text field in a form and it's failing with SCRIPT5007: Unable to get value of t
-
Hi, i'm having issues within the folders area of the library module. My setup is the following. My home PC has Windows 8.1. My work laptop is a 17" MacBook Pro. The library file as well as the smart previews are all located on a dropbox drive. My iss
-
Report/Concurrent Request shortcut on desktop..
Hi All I want to create a shortcut for a report/concurrent request which I use frequently. I dont want to login into Oracle Apps. I just want to run the report/concurrent request by clicking on the shortcut and giving the parameters. Is it possible i