No sound or iSight in boot camp with win7

Recently installed Win7 Pro via boot camp and most all has gone fine, with exception of no sound and compatability issue with iSight hardware. Device mgr. does not show specific hardware under sound controller and can't seem to get iSight cam to work, however it is recognized in the device mgr. as well.
Open to all suggestions....thanks in advance!

Bob, you got me thinking....I ASSumed that by keeping the USB drive connected while installing win7 that it would install the appropriate drivers etc. Initially they did, as my screen, mouse, keyboard all worked fine.
When I was searching thru the flash drive for appropriate drivers etc. I noticed "setup.exe. I ran it and it went thru the process and essentially solved the problem.
My comment to readers is to be sure that when in the windows control panel to make sure that BootCamp is listed there, as this was my clue that the installation did not go completely right.
All is OK now, with iSight, trackpad, nVidia control panel, Bluetooth all in operating condition.

Similar Messages

Slow video update with iSight on Boot Camp Windows XP SP3

I have the latest White Macbook with the NVidia Chipset. I have installed Windows XP SP3 via Boot Camp and all has gone fairly well. Only issue is iSight... It shows up in Devices as iSight and will open and initialise. However, the video preview is VERY slow. The picture updates every 10 seconds or so! It can take a still picture but any attempt to use as a video device (under Windows Movie Maker) causes a crash. Have used iSight under Boot Camp before, on earlier MacBooks with no such problem. It works fine under OSX. Any ideas? Many thanks.

Still no thoughts? If it helps, I've found out that if I use Windows Movie Maker and lower the resolution to the lowest available, iSight works fine. A clear preview is available and it will record video from the iSight. However, the original problems are still present when selecting the iSight icon from, "My Computer" or trying to use Windows Messenger. Anyone any ideas?

Can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition?

can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB external hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition? I now want to add another 500 GB?

Yes. Windows supports external USB drives.

Cinema DIsplay sleeps when I use Boot Camp with Radeon 5870 through DVI connection

I just created a bootcamp partition on my Mac Pro (1,1) with Radeon 5870 and XP Professional so I can play Train Simulator 2012 with maxed out settings. Well after hours of installing Windows XP and updating it (via Parallels so I could do other things while waiitng for Windows) I got Train Simulator 2012 installed, Windows XP Professional fully upto date and reboot to bootcamp. I see the Windows screen and then my monitor goes to sleep (best guess). I am using an Apple Cinema Display 20" and is of course connected to the DVI port. One guess (and I hope I am totally wrong about this) is I think I remember reading the DVI port id display 3 not 1. I hope this isn't the problem (requiring me to buy a $40 Mini Display port for DVI adapter.
Any ideas as to why this is happening? I was so looking forward to playing Train Simulator with maxed out graphics via Boot Camp with the Radeon 5870 1GB. Don't get me started as to why my line out is not being detected by XP Pro.
I also have the latest Bootcamp drivers for XP (3.2).

Never used XP and on Mac Pro I wanted to use all 4-cores and more than 1.9GB RAM but often it seems that in the past and with Fusion anyway you would need to install Windows updates and drivers natively not thru or in the VM.

Driver issue FIXED in Vista / boot camp with new, unibody macbook pro!!

Hay people, I found a fix for the freezing issues with Vista running in Boot camp with the new, unibody Macbook pros. The driver for the 9600M Gt is no good if you install it from the Apple 2.1 version driver disc (Mac osx disc)for some (most) of us.
I needed to go to Nvidia's site and download the one from DECEMBER 08. If you click the "download drivers" tab on the site, scroll past the current driver it wants you to look at (go to the near bottom of page), click the archives, and input your OS version. Also input "Gforce" and "M" series when needed. It will give you a choice of two drivers. DO NOT CHOOSE THE FEB 09 Driver. Thats the BAD driver for most of us. Choose the DECEMBER 08 driver. Download and enjoy. Be sure to roll back the VGA driver (or the current driver) first before you install this. It should work.
I've been through the ringer with this for weeks now and have even tried to take my MBP back to swap for a new one. Apple wont have any of that so I thought I was SOL. Not quite. This DOES work for me with Vista. It also works for Windows & if you have it handy.
By the way, I am posting this for people who HAVE HAD THE FREEZING problems, not for people who haven't. Apparently there are some out there who are running Vista just fine on their unibody MBS's. Most of us are not.
Cheer's-----Seattle, where the evil empire looms dark

This never worked. I sold that machine and got a new 17" unibody. IT, by the way, works just fine. I KNEW it was that **** 15'. It took 30 more seconds to boot up I found out also.

Boot Camp with Win 8 Can't See The USB External Drive [MBR with NTFS, Fat32, HFS Partitions]

Hi. When I boot to Boot Camp with the latest Apple Windows Support drivers can't see my USB Flash Drive, DVD and OS X volumes but not my USB external drive that has an MBR partition scheme (using iPartition from GUID) and in there it has different volumes [HFS when I boot to Snow Leopard, Fat32, NTFS]. What can I do with Boot Camp to make it see my USB external drive and why isn't it seeing the USB when it can see the USB flash drive both use USB?
Thank you in advance.
God bless.

Buy Paragon NTFS for OS X $20.

Keep getting error occurred while formatting the disk using boot camp with usb

So I keep getting the above error when trying to use boot camp with a USB drive. I have tried with more than one flash drive, all formatted to FAT32, multiple isos, both ripped right from a windows 7 ultimate dvd and downloaded, and I have made sure the iso was unmounted. I have also tried all different combinations of checking the options in the boot camp assistant menu. Any ideas on how to get this to work?

I was mistakenly thinking of the Fat16 limit. That is my mistake.
When bootcamp assistant failed to create the USB from my iso disk (with no explanation), I decided to experiment a little with the dd and cp utilities. dd failed, and cp told me the install file was too big.
The install.wim on my iso is 4,351,019,025 bytes. So even if 4GB is the file size limit, it is too big. 4GB is 4,294,967,296 bytes if I recall.
If I am still right about the file size, smaller editions of windows 7 would be able to fit on the flash drive, or people can have an actual DVD with windows 7 and install from there.

Hi, I have installed boot camp with wins xp home but i can't get on line with it. can only one help please.

Hi, I have installed boot camp with wins xp home but i can't get on line with it. can only one help please.

Please close this thread, I have managed to get a hold of a DVD including all the drivers, so I suppose that will work, if not one way then another.
Thank you for the quick answers.

Urgent help needed related to boot camp and Win7 32 bit

I have installed boot camp and Win7 32 bit on my iMac (2010) but I can't start from my mac os even by holding the option key. Windows doesn't recognize my wireless mouse either, but for now going back to the mac os is the priority. Can anyone help please?

Welcome to Apple Support Communities
Hold the Option (Alt) key after hearing the startup chime and until you see all bootable partitions in the screen. Do you see the OS X partition? If so, select it to start up in OS X. If you want to start up in OS X by default, open System Preferences > Startup Disk, and select your OS X partition.
Respecting to your wireless mouse, you have to install the Windows support software. To download it, you can use Windows or OS X, from this site > http://support.apple.com/kb/DL1630 If you are in Windows, decompress the file and run the installer. If you are in OS X, follow the steps of the website to burn it to a USB drive

Can I reinstall Windows 7 on Boot Camp with the same product key?

I have run into some issues with my Windows partition, so I want to reinstall Windows 7. I have a genuine copy of Windows 7 Ultimate Edition.
What I wish to do is to completely remove the Boot Camp partition, and then create a new one and install Windows 7 over it. However, I have only 1 product license key. When I reinstall Windows 7, it's going to ask for the product key, whih is obviously going to be denied because I have used it.
Is there any way I can acquire another key for this purpose? I am willing to pay a small fee, but I am definitely not willing to pay the full amount for a new Windows 7 copy.
Furthermore, and a little off-topic: Does anyone know if there are any compatability issues with the Windows 8 dev edition and Boot Camp? Can I use the support software for Windows 7? Will it be able to take advantage of the hardware? Will I get sound and internet? Will I be able to scroll with my trackpad?
Thanks.
[EDIT] I forgot to mention that the main reason I have to create a new partition instead of just Custom Installing over the previous one, is because I require a larger partition size.

Thanks for your help!
Not to be a pain, but I just want to clarify some things.
The hatter wrote:
The retail version can be reinstalled as much as you want, even to a new computer (just not two at same time)
Yes it will activate just fine on reinstall. Not an issue.
Let's assume I do not have issues about reallocating disk space, and just want to re-do my whole partition. Here's what I would do. Please tell me if it would work fine, or if I would hit a snag somewhere:
Have original retail W7 disk at hand (the one I previously used for my first install).
Remove existing partition using Boot Camp Assistant.
Re-install using the said disk.
W7 should activate without a problem, even though I've used the license before.
Do I have to do anything on Windows before re-installing it to "deactivate" the copy (or something along those lines) before I can re-activate successfully on my new install?
And what is System Builder?
Thanks for all your help!

ISight in Boot Camp - Unusable?

Hello, I bought a new white MacBook (May/2009) and I'm trying to use the iSight camera in Windows XP. I installed all the Boot Camp drivers, and although the camera is detected and installed, it's barely usable, refreshing the image every 10 seconds or so.
The camera works perfectly on OSX, the problem is only happening on Windows. If I open it via "Apple Built-in iSight" under Windows Explorer, I can see that it works for about one second (with normal refresh rate) then it freezes and starts updating every 10 seconds. If I try to use it as a capture device in Windows Movie Maker, it just crashes the app.
Any toughts on that? Is it the "expected" behavior on Windows?

Bob, you got me thinking....I ASSumed that by keeping the USB drive connected while installing win7 that it would install the appropriate drivers etc. Initially they did, as my screen, mouse, keyboard all worked fine.
When I was searching thru the flash drive for appropriate drivers etc. I noticed "setup.exe. I ran it and it went thru the process and essentially solved the problem.
My comment to readers is to be sure that when in the windows control panel to make sure that BootCamp is listed there, as this was my clue that the installation did not go completely right.
All is OK now, with iSight, trackpad, nVidia control panel, Bluetooth all in operating condition.

Trying to Boot Camp with Windows 8.1 Problem

I'm trying to Boot Camp my Mac with Windows 8.1 and have been getting this problem:
"The disk cannot be partitioned because some files cannot be moved."
I did a search for help with this topic and found 100s of threads with the same problem. However, from what I read it seemed that the problem is that there wasn't enough continuous space to create the partition. I'm skeptical to believe the same is the case with my problem, and if it is then I'm quite disappointed with Apple.
The reason being that I bought and opened this computer literally yesterday (Nov 24th, 2014) it is the latest model MBP 15'' 2.8 Ghz and 16GB of RAM, and 1 TB SSD. I find it hard to believe that in 980 GB of un-used space, boot camp can not find 95 GB (what I'm trying to partition) that are continuous.
I saw that the most common solution to this was doing the whole back up, delete and restore method. Are there any simpler methods that do not require an external hard drive (as I don't currently have one).
Thank you very much in advance to anyone who can help.

Oddly enough, this is what seemed to do the trick, I've now got a fully working Windows 8.1 partition running on my rMBP:
Solution:
Finally got this working, thanks to a person named "turbostar" over on discussions.apple.com:
Re-run Boot Camp Assistant to remove the Windows partition and restore the full Mac HD as a single partition.
Run a PRAM reset (restart, while screen is still black, hold down ⌘+Option+P+R and keep them pressed until you hear the startup sound a second time).
Open disk utility and repair permissions on the Macintosh HD partition. TWICE.
Start Boot Camp Assistant again.
Seems hokey. With those instructions I thought I would also have to stand on one foot, point to my nose, rub my belly, and hope for rain. But it did end up working.

Can my MacBook Pro use boot camp with Windows 7 with BitLocker encryption?

I'm at wit's end with this, and I'm hoping I can get some advice here. I've read so many forum, posts and reviews that I'm not entirely sure what I can trust.
I have an early 2011 MacBook Pro (MacBookPro8,3). I need to run Windows encrypted for work purposes. It needs to be real windows with full-disk encryption (FDE). The business tools run in boot camp, but not in Parallels, because Parallels doesn't support DirectX 11. I would also benefit greatly from an SSD.
I do not want to do anything hacky like removing the Mac reocovery partition, because I've read that just loading Disk Utility in OS X might mess up your patrition boot tables as it tries to "fix" things. I don't want to have to manually reocover to fix stuff or chance losing data.
I have read (and tried) installing BitLocker on Windows 7 Ultimate under boot camp, but ran into the partition limit on my internal HDD. A maximum of 4 partitions are allowed, and between OS X, its recovery, boot camp, and the Windows partition, all 4 are used.
I have considered one of the following, which may work:
Install OWC's Data Doubler Kit with an additional 240GB SSD (http://eshop.macsales.com/item/OWC/DDMBS6E240/). I would replace the internal SuperDrive with the HDD, and install the new SSD on the faster SATA 6G port. Windows would be installed on the SSD and OS X would stay on the HDD.
Replace the internal HDD with a new SSD (keeping the SuperDrive). I would lose OS X altogether and just have Windows installed.
Forget the entire thing and just buy a PC for work.
My thoughts are that with option both options #1 and #2, I don't even know if these setups will allow BitLocker. In both cases, Windows will be the only partition on the drive, so I'm assuming that when BitLocker is installed, there will be room for the new partition it creates. With option #1, I'm pretty sure I'd still be using Boot Camp, but how would that would for option #2? Is boot camp used even though there is no Mac partition? Would I still need to keey the Mac Recovery partition for this to work? I'd probably need to use Boot Camp drivers under Windows, I think.
I'd certainly be interested in using a self-encrypting drive (SED), especially a SSD, but I'm concerned that most of them appear to require TPM or BIOS functions that Mac's EFI does not provide. Such a drive would allow me to drop BitLocker, but I would need to be use the self-encryption actually works on this setup. From what I've read, most of the SED drives will work just fine under EFI, but you won't be able to set or access the encryption password, which pretty much makes these drives unencrypted.
I've read that BitLocker can be configured to use a flash drive as a decryption key, but I haven't been able to test that yet. I'm tried creating bootable flash drives under Windows and OS X, and none of them seem to appear when I access the boot menu (hold option during boot chime). I don't even know if this system supports bootable USB flash drives, or whether they can be used as a BitLocker key under boot camp.
For the record, I have attempted to use an external thunderbolt drive as my Windows partition, but Windows doesn't want to be installed on removable media, and even if it worked, I believe you can only boot OS X from thunderbolt. I do have a second OS X install booting from the thunderbolt drive, so I know that works. Also, FileVault 2 is installed on my OS X partition, and I read something about FV2 using the Recovery partition somehow so you can't remove the recovery partition to make room for BitLocker.
So ... does anyone have any suggestions preferably based on personal experience as to whether options #1 or #2 should work for my needs?
At this point, I'm really thinking I should just bite the bullet and purchase a PC that I will forever look down upon.

Are you using a MacBook Pro? Is everything installed on the same drive?
I would love to know how that install was performed. When I install Windows under boot camp, my MacBook Pro drive ends up with 4 partitions: Mac, Mac Recovery, Windows, and a small partition that I believe is used by boot camp.
Installing BitLocker on Windows requires the creation of a new small partition that Windows will boot off. The small partition is unencrypted, while the primary Windows partition will get encrypted. The following post discusses the maximum partition issue: https://discussions.apple.com/message/22753791#22753791
Has anyone installed Windows through boot camp on it's own drive, and if so, can BitLocker be installed on that without reaching any partition limit? I'm assuming that's possible, but would like to know before I spend hundreds on new hardware.

I can access internet via boot camp with windows 7, but not when I use the Mac w/Mt Lion side. Thanks for any tips!

I'm using a 2012 Intel-based iMac with Mt. Lion and Windows 7 with Boot Camp. I used to be able to access the internet on both sides. Now, my only internet access is through Boot Camp. At one point, access was unable on both sides but IE in Windows 7 automatically diagnosed the problem, changed some settings (which I don't know) and I could access the internet on both sides . . . for a while. Now, I can only get online in Boot Camp. Since IE detects no problems it doesn't apply the fix as it did before. Does anybody know what's going on?
I should mention that I installed Boot Camp because there is no Mac version of the software (VantagePoint) I need to use (duh). I wanted to be able to use the software w/o rebooting all the time so I installed Fusion. Of course, I didn't ask the VantagePoint techs if this would solve my issue. It didn't - VantagePoint won't work with Fusion, but it will with Parallels. So I installed Parallels and imported Boot Camp. Apparantly, it was not set up properly, I'm getting all kinds of errors reported in Console (e.g. "Found cross-bounds GPT partition. GPT disk detected," mdworker cannot talk to sandbox, etc.). The VantagePoint techs say the first step in a VM retry is to regain internet access to the Mac.
Anybody who can help will become my new best friend. Thanking you.
Message was edited by: Marmadukemark
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Mark-PC
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Bluetooth Network Connection 2:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network) #2
   Physical Address. . . . . . . . . : 44-2A-60-CF-D0-93
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection 2:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
   Physical Address. . . . . . . . . : 32-9A-DD-9F-1D-FF
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection:
I neglected to add that I'm using using ethernet with a cable modem. I'm the only user, so it's not networked for others. Below is the report that was generated with respect to the connection problem - when Boot Camp could not access the internet.
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
   Physical Address. . . . . . . . . : C8-2A-14-1B-EE-D1
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::a47a:3af7:72e6:f899%11(Preferred)
   Autoconfiguration IPv4 Address. . : 169.254.248.153(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   DHCPv6 IAID . . . . . . . . . . . : 348662292
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-CD-DA-86-10-9A-DD-9F-1D-FF
   DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                       fec0:0:0:ffff::2%1
                                       fec0:0:0:ffff::3%1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wireless Network Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Atheros AR938x Wireless Network Adapter
   Physical Address. . . . . . . . . : 10-9A-DD-9F-1D-FF
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter 6TO4 Adapter:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft 6to4 Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{077AEF3E-6752-42C5-A037-9FB69A17CB27}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{83EF0082-ADD7-4283-8303-9133BD882E39}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{22AA845D-6210-4549-AAE5-3D8917BA7286}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{D364C869-F7DD-4F9A-ADBA-7EBF53DD21D2}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Are you using a MacBook Pro? Is everything installed on the same drive?
I would love to know how that install was performed. When I install Windows under boot camp, my MacBook Pro drive ends up with 4 partitions: Mac, Mac Recovery, Windows, and a small partition that I believe is used by boot camp.
Installing BitLocker on Windows requires the creation of a new small partition that Windows will boot off. The small partition is unencrypted, while the primary Windows partition will get encrypted. The following post discusses the maximum partition issue: https://discussions.apple.com/message/22753791#22753791
Has anyone installed Windows through boot camp on it's own drive, and if so, can BitLocker be installed on that without reaching any partition limit? I'm assuming that's possible, but would like to know before I spend hundreds on new hardware.

Video Out in Boot Camp with Windows XP

Sorry, this is my first help request... i hope i write in a correct section.
I installed Windows XP SP2 with boot camp in my Mac Book Pro. I have the third part MiniDisplay Port to HDMI adapter with audio. I use it for projector. I always use it without problems.
With Windows XP i can't use it... i don't know why. The adapter is power off (led is off) and i don't know what i have to do for use second monitor in woindows XP.
I know about FN+F5 in windows... but in Mac F5 is keyboard light and if i set Functions keys as normal key (from Boot Camp Options) F5 is refresh key and fn+F5 is the keyboard light.
So what i have to do?
Thaks
Ale

Yes, XP will be able to detect the expansion card if you download the appropriate drivers online. When bootcamp was first starting... this article circulated http://docs.info.apple.com/article.html?artnum=305401... summary, you should remove the fiber channel card before bootcamping. Since then the software has gone through the proper modifications that you can just plug the card in, boot into windows, and download the LSi driver for XP.
So you'll have no problem setting this up.
Cheers
Ron

No sound or iSight in boot camp with win7

Similar Messages

Maybe you are looking for