No sound or music playback after update

I updated my AppleTV today, and now it won't play my music stored in the device and there is no sound from the unit. Any fixes?

Same problem here. Whe I power cycle TV or go to another channel and back, HDMI syncs and sound is back for about 5 seconds, then it is gone again. Seems like a broken HDMI handshake...
I do get the startup sound and some menu soundeffects. Even AirTunes from MacBook to ATV and then to TV is working! but none of ATVs local contents or internet trailers give any sound.
EffBee
Message was edited by: effbee

Similar Messages

Iphone 4s no sound via music player after update to ios 7

I was totally depressed by you.My iphone 4s is having a problem with sound after updating to ios 7.0.3.No sound via music player. Some times i can hear sound but it is repeating same problem,suddenly sound disapears.I think it is the problem with the software ios 7.
i hope you will solve through another update..............................................................

Hello everyone, I am having the exact same issue. My charger stopped working following 7.0.3 upgrade. I since bought couple more charger (must admit one was definately counterfiet; and the other one what I believe to be genuine purchased from ebay). I even tried my friend's genuine apple charger that came with his 5s which is also not working.
What is the resolution?

No sound in multimedia playback after update (xine,vlc,mplayer)

Hi!
For some days now I don't have sound anymore in amarok and vlc. Since the sound works on e.g. youtube I don't know how to find the root of the problem and of course not the solution. In amarok my sound card doesn't show up any more. I'm using ALSA. "aplay /usr/share/sounds/alsa/Front_Center.wav" doesn't give any output. (I don't know if it matters.)
I already spent time in searching (googling) by myself without success. Can anyone give me a hint?
Thanks in advance,
Maximalminimalist
Last edited by Maximalminimalist (2010-12-14 20:05:41)

Ultraman wrote:What vitals did you check? What DE/WM are you running? KDE by any chance?
I'm using i3. (tiling WM)
Ultraman wrote:Did you check the mixer? Anything muted there? Probably not, but worth a check.
Alsamixer should be fine. (Sound works on youtube anyway.)
Ultraman wrote:Have you blacklisted the snd-pcm-oss module to prevent some app using OSS instead of ALSA and claiming the soundcard that way? (rc.conf -> MODULES=(!snd-pcm-oss) )
No, I even had it in the modules but the "!" makes no difference.
Ultraman wrote:If you are running KDE: Have you checked Phonon's settings? Does it recognize any backend (e.g. Xine, Gstreamer)? What about sound hardware?
I'm not using KDE but amarok recognises xine.
Ultraman wrote:Tried starting VLC and Amarok from a terminal and looked at the output they send to it? Perhaps any error messages among them?
When I start VLC from terminal I get this:
vlc Weird\ Al\ Yankovic\ -\ White\ And\ Nerdy\ \[HQ\].avi
VLC media player 1.1.5 The Luggage (revision exported)
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE")
Blocked: call to setlocale(6, "")
Blocked: call to sigaction(17, 0x7fec095fbac0, 0x7fec095fbb60)
Blocked: call to setlocale(6, "")
frame skip 8
frame skip 8
When I tell vlc to use alsa. (Which wasn't necessary before.) I get this as a "pop-up error":
Potential ALSA version problem:
VLC failed to initialize your sound output device (if any).
Please update alsa-lib to version 1.0.23-2-g8d80d5f or higher to try to fix this issue.
But pacman tells me:
pacman -Qs alsa-lib
local/alsa-lib 1.0.23-2
An alternative implementation of Linux sound support
local/lib32-alsa-lib 1.0.23-4
An alternative implementation of Linux sound support (32 bit)
EDIT: I just tried KDE. (I have it installed but don't use it.) Everything is weird. I can't press anything right with the mouse because everything is mirror inverted and some zones are covered with a weird mix of pixels...fact is KDE doesn't work fine on my computer right now.
Last edited by Maximalminimalist (2010-12-12 04:01:53)

Trouble with ä,ö,ü in Music Manager after updating...

Hi, it seems there is a bug in the Nokia Music Manager after updating the PC Suite to version 7.1.26.0. The german special characters (Umlaute) like ä, ö, ü, ß are no more correctly saved or displayed in the file names and tags.
Can you help?
Kind regards
netdog63

Quote from: NovJoe on 23-March-09, 14:53:31
Why don't you want to follow up with your previous thread?
It'll be confusing when you started multiple threads linking to the issue.
Sorry, I haven't posted here much so I'm not familiar with the protocols. I just thought it would be less confusing to make this a separate issue. I linked them to avoid duplicating info on my config & h/w

Premiere pro CC drop playback after update 7.2.1

Why premiere pro cc drop playback after update 7.2.1? I have a MacBook Pro late 2011 with ATI Radeon HD6770m 1GB. Premiere pro cc 7.1.0 run normal, ok, without crashing and drop-freeze frame, but after update 7.2.1 i have all this problems.

Just came on here to post about the buzzing transitions, glad to see it's been fixed already!
Another thing though I don't see mentioned, since moving to 7.2 I find audio playblack is out of sync while editing, and in some clips significantly more noticeably than others. This only happens during playback, if I pause and scrub manually, the audio is perfectly in sync. This actually messed up a project for a client. I thought the audio off the camera was out of sync in one segment so I bumped it a few frames before exporting. Didn't check it after of course and sent him the file, then got a reply back that it was out of sync in that spot. Check the exported video and sure enough, he was right. Check it again in project but it looks in sync. So I bump the audio back in the timeline so that it LOOKS out of sync again during playback, but the new exported video is perfectly in sync!
Editing a TV show now with hundreds of clips and it's maddening with some looking fine, some looking a little off, and some looking completely off and having to manually scrub to check and be sure along the way.
Hopefully this is also fixed in this update..will see tomorrow.

My new iPad sound is not working after updating to ios 6.1

My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

Hi,
I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
I Have tried:
- Updating to iOS 6.1.3
-re starting the device
-checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
-going into general settings and reset all settings
-the device reset several times (waiting until I saw the all important apple logo)
-removing the last few apps I installed.
Nothing at all has worked, please help!
New iPadiPad

All music gone after update

After updating yesterday I clicked on iTunes and all my music is gone. No playlist. This happened a few weeks ago while using the old version. I took the laptop into the Geeks and they were able to find my music on my backup drive. They said they could not help me today because of the new update. I don't understand why this keeps happening. I have had iTunes for a while now and never had a proble.

You know, I had the same exact problem. Updated my phone to 4.2 and left the house went to play music and it was all gone!!! I was so upset! Turned it off and on, Reset it, re-synced, and still the same problem. All the music showed up while synced but not with iPhone alone. Until!!! While it was synced I played a couple of the songs that appeared to be still in my iphone library. I then gave up thinking i would just have to restore to factory settings and just start over. but one last try and shock of all shocks my music reappeared! Dont know if it was just a fluke but I wanted to share the info in case there is something more to it. Good luck Iphone users! I hope you find some relief from your problems as I have

Cannot restore music/apps after Update to phone

Hi. Really hope someone can help here. Don't think I have a severe problem, at least hope not. Nutshell:
-Started Update about 3 hours ago.
-After update, got error message stating problem, needed to restore to back-up.
-Thankfully I had backed up the device just prior to update, and just checked, I still have all of my data on HD
-When trying to restore, I kept getting error message, asking me to repeat the process, and phone is completely bricked at this point
-Saw message stating this is frequently caused by anti-virus/firewall, so disabled AV/Firewall, restore again, successfully
-Phone no longer a brick, but ALL data is gone, like a brand new phone, not a good thing
-I can see all of my apps/music in my itunes library, as well as my hard drive, but can not find a way to get the data back to my iphone.
-Tried syncing (haven't tried restoring yet, wanted to do a little research first) no success, no drag and drop, etc... very stupid imo, how can you not be able to drag and drop?! anyway...
So, need help getting my data back to my phone, music and apps.
Again, your help will be greatly appreciated. Thank you
Message was edited by: Dave1818

Hi all. Just in case you end up searching this thread, the answer was so stupid and should have been obvious... man, Apple is really screwing things up that should be easy. Anyway, here is the dumb answer, and yep, maybe it is me who is dumb, but we all miss the obvious, (who hasn't last keys lately???) it should have been a super easy fix.
Ok, I never had an issue with syncing prior to this, default settings worked fine, and I am not someone who uses iTunes for anything other than this required use for updates and back-ups. So, I had/have very little interaction and knowledge of iTunes.
When looking at the GUI, clicking on your iphone or other device, you immediately see the summary page. I never noticed the tabs on the inner frame of the window, with the info/apps/music/etc subtabs. I always browsed my libraries by the main tabs on the left side.
Then, after all of this crud yesterday, I did find them. After the update, for some reason, they were all unchecked, all music, apps, frikking so stupid!! When you go into the page, you have to re-check the box to sync, something I had never had to do before. Then, as with most preference set-ups, I cycled through the pages, checked the boxes, tried to sync after, and it still didn't work...
Well, the genius coders here decided that the only way to make these changes 'sticky' was to click 'apply' on EACH SEPARATE TAB!!! You have to do each 1 by itself: music sync check then APPLY, apps sync check then APPLY, you get it..
Again, thanks SO MUCH Apple for another update with Unacceptable major flaws, so simple I was always looking tons deeper. Steve Jobs, Get your team back on point, this is getting to be a major mess..
Hope this helps others.

Can't connect to music store after updating itunes; ?connection refused?

Can someone from itunes please help. i mean ****. i guess u guys don't think of the people in ur forums that have problems. i have a problem accessing the music store. it says the network connection was refused. please check ur settings...blah blah blah. anyway the point is there are tons of people with this problem, no solutions, end of story. and lots of people have been having this problem right after updating their itunes. WHATS WRONG WITH THIS PICTURE? just tell us how to fix our music store. then maybe people would actually still use itunes instead of limewire.

The iTunes Music Store uses both HTTP Port 80 and 443. Make sure both are open in any firewall, and also make sure that the following domains are exempted in any firewall/filtering software:
phobos.apple.com
phobos.apple.com.edgesuite.net
You might want to completely shut down any firewall temporarily, just to see if that makes a difference. If you can then connect, you know it's a problem with your firewall.
Another possibility is an erroneous entry in the Hosts file. This tip from Mark Holly resolved problem for another poster (please note that I have not tried this fix so I cannot vouch for nor support the suggestion: I provide it only as a suggestion that worked for someone else):
NOTE: this will change a Windows operating system file. This could cause you problems if not done correctly.
Using Windows Explorer navigate to the following folder:
C:\WINDOWS\system32\drivers\etc.
In this folder is file called 'hosts'. Open it using Wordpad.
On the poster's pc there was in this file one long line. At the end of this line was "127.0.0.1 phobos.apple.com:. phobos.apple.com is the web address for the music store. What "127.0.0.1 phobos.apple.com" is doing is telling the pc to look for the web address only on the computer rather than the internet. By remove this section of the line and saving the changes you may then be able to access the music store without any problems.
IMPORTANT: Before making the changes to the hosts file I highly recommend making a backup of it. That way you can restore the original if other problems occur.
Hope this helps.

Music erased after updating to IOS5

After updating my iPod to ios5 my whole music erased. How do I get it back? Help please!

I had the same problem with my 3GS after an iOS5 update and found the following link: I found deleting the music and re-syncing solved the problem (at least for now!).
http://www.iosappadvice.com/forum/fix-music-not-working-bug-in-ios-5-beta-7/
1) Plug your iDevice into iTunes
2) Under your devices music tab, de-select Sync Music -> Click on Sync (this should remove your itunes library from your iDevice
3) After completing step 2, go back to the music tab and re-select Sync Music -> then click on Sync
4) After completing step 3 your iTunes library should have returned to your iDevice
5) Try playing your music now from the music app. It should work.
As I only tick the music I want to load individually, I deselected everything, selected synchronize iPhone, then ticked the boxes I wanted to load again and synchronized a second time. Worked immediately.

Music dissappeared after update

after updating my ipod touch in itunes wipe of music in my libary and on ipod device how do i retrevie my music

iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem
NOTE:
You will have to backup the iPod to the old computer and then restore from backup since you can only sync with one computer and the updating computer is now your syncing computer
iOS: Back up and restore your iOS device with iCloud or iTunes

No sound from m4v files after update to IOS 5.1

Hello
After updating my AppleTV3 to IOS 5.1 there is no sound from mine .M4V files.
MP4 plays just fine. My apple TV is connected to LAN, and uses HDMI through my receiver.
Has anyone experienced similar problems?

Bought a new ATV3 and updated software. Gives me picture, but no sound when I play movie trailers on the Apple service. Also, no sound when I play purchased movies. These same trailers and movies play through my ATV1. Installed my new HDMI cable on the ATV1. No change.
I'm not interested in plugging directly into the TV. As I use an HDMI switch, the ATV3 follows the same path through the receiver.
Right now the thing is just a paper weight. Doesn't give me sound when mirroring from my iPad which was my reason for buying it.

Help with video playback after updating to 3.1

Hi there, after updating to 3.1 on my 2nd gen iPod Touch, I restored it and loaded some videos I converted. On playing those files, the video would play normally until at a random point the video frame would freeze, while the audio continues to play. If I quit the video app and go back to the video, it would play again normally for maybe 1 minute and then the video frame would freeze again, while audio still continues.
These video files were working perfectly before I updated to 3.0, so I doubt that there is a problem with the files. Could someone suggest what I should do in this situation? Should I revert the firmware back to what it was before updating to 3.0?
Thanks in advance for your help!

I have the same issue, except that if I let it go on for a few secomds the video eventually catches up. I am also watching converted videos, and mine are in mp4 format. I haven't tried m4v yet but this is still a bug that Apple should fix.

Sound issues in games after updates

Hi all,
I have a Quad w/ 2GB RAM, 250GB HDD and 7800GT. Just a couple of days ago, all the games I play worked fine (Rise of Nations, Rainbow Six III, Ghost Recon, America's Army etc. etc.). Now, when I load Ghost Recon, I get music on the menus, but no sound at all in the game. Rainbow Six III refuses to load at all (I get a blank black screen). America's Army's sound seems to be of terrible quality now, and finally, once Rise of Nations passes the intro movie and gets to the splash screen, it quits just as the music plays and loads the menu.
I've checked all audio settings everywhere - in the games, system prefs etc. iTunes still works fine, and I can still watch movies.
This only started happening after I installed a few Apple updates (specifically, the latest Security Update and iPhoto). I thought that if I updated QuickTime the problem may go away, so I downloaded the patch but this did not fix anything.
I ran the extended hardware test to see if anything got picked up, but it doesn't appear to test the Sound Card (which I am suspecting). It's more likely a software issue though, right?
Any one else in a situation similar to mine? Would a simple re-install of Tiger fix up the issues?
Thanks in advance,
-Travis
PM G4 DA Dual 1GHz, iMac G4, iBook G3, Dual 2.3GHz G5, 40GB 4G iPod Mac OS X (10.4.6) (in the G4) 768MB RAM, Radeon 9800 Pro, 120GB + 30GB HDD, Pioneer DVR-109, 2 19"

Don't worry, I fixed it the day after posting. Had to change the output frequency in the Audio MIDI Setup Utility
-Travis

Sounds didn`t work after update to iOs 7.1

After the update to iOs 7.1 the sounds (incoming calls, Whats App, Facebook) didn`t work on my iPhone 4 when the screen is locked. If I like to hear music or the screen is unlocked, they work.
Can somebody tell me what happened and how to solve that problem? Thanks for your help!

No problems with Wi-Fi on iOS 7 here.
Try restoring the software > iTunes: Restoring iOS software
Might want to try this first ...
Tap Settings > General > Reset > Reset All Settings

No sound or music playback after update

Similar Messages

Maybe you are looking for