No sound or very poor one from front speakers T7900 system

I have a T7900 system and sudenly I have no more sound or a very poor one from the front speakers (left and right). The others (central, rear and subwoofer are working fine). I tried all configurations posible and from the control panel but still no result.
Anyone can help?

Hi,
Try swapping the front speakers with the others, this should tell you if the speakers are faulty. You might want to get in touch with support for further assistance on this.

Similar Messages

  • Sound from front speakers only

    I am using optical audio with Sony DAV-DZ810 home theater and my Apple TV2. The system is new and I am not very familiar. When I watch a trailor (have not watched a movie yet) on ATV2, I notice that sound only comes from two front speakers only. No sound is heard from center and rear speakers.
    Can anyone please advise?

    Normal.
    Trailers do not usually have 5.1 surround.
    Not all movies have 5.1 surround either - it should say or show the dolby icon on the movie preview screen and once you choose to rent it often says you are renting film x which has surround surround (or something like that).
    AC

  • Playing back Recorded TV Programs using Windows Media Player and only hearing Sound from Front Speakers

    Hi All,
    I have Windows 7 Ultimate 64-Bit Service Pack 1 with Windows Media Player 11 installed.
    When I click on one of my Recorded TV Programs to watch and hear, I can only hear the Sound coming from the Front Speakers.
    When I right-click on the Program and open it up in Real Player Cloud. I can indeed watch the program and hear Clear Sound coming from all 5 Speakers plus the Subwoofer.
    What setting do I change to use Windows Media Player and have sound coming from all 5 Speakers and the Subwoofer?
    Thank you!
    thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

    Hi Andreas,
    Thanks for the reply.
    The link you put up, takes me to the page, but
    "The requested URL /surround/www_lynnemusic_com_surround_test.wma was not found on this server."
    That was WaterFox.
    The webpage cannot be found
    This in Internet Explorer 11.0
    The Files in question were Recorded by Beyond TV to my Local Hard Drive.
    When I open the recording in Real Player Cloud, installed on my computer, not streaming over the Internet, I hear it correctly played.
    When I use Windows Media Player, nothing can be heard from the Rear Speakers.
    Speakers and Hardware are working fine.
    thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

  • Quality of imported movies is very poor: SWITCHER FROM PC TO MAC NEEDS HELP

    I find the quality of the video images imported from my JVC gz-mg575e to be very poor. If I play my movies directly of camera on TV I have a crystal clear image. After importing the movie in IMovie 08 the quality gets worse.
    I already selected the ultrafine mode for the camera.
    Is there something wrong with my setting of iMovie?
    Or is it because I use iMovie08 instead of Final Cut Pro?

    This is a PAL camcorder I think. Are you are selecting PAL as your setting when you import into iMovie?

  • Whistle from front speakers

    Why do I hear a high pitched whistle noise coming from my speakers when I accelerate?  How can I fix this problem?   
    I had an cap. In my last car and the same thing happened.  I currently have a Yellow top battery which I heard would be better.  Do you know any other solutions to this problem?  thanks

    You also need to ensure that all of your equipment is grounded at the same place.  Otherwise, you can set up a ground loop between components.  When low-level lines (i.e. RCA cables) HAVE to cross any other automotive wire make sure that it crosses at 90 degrees to minimize cross-talk and interference.  Why? Every wire acts as an antenna and your sensitive audio equipment wires can easily pickup your car's electronic noise.
    I do not work for Best Buy and am not affiliated with them in any way. I like HT and want to help people improve their HT experience. "There is a LOT more than just having a TV to make a home theater"

  • Audigy 2 ZS won't play Sound from Front speakers, just Rear

    ;? ? I recently installed Windows 7, and have been having trouble with my speakers playing correctly. Intially, the first time I installed the 07/3/09 drivers from Creative, I could only play music/test sounds out of my front 2 speakers. I unistalled the drivers, and re-installed the Beta drivers instead, and I also uninstalled the Realtek drivers as I heard that they can cause problems.
    ?? So now I have the Beta installed, and Realtek not installed - and now music/test sounds ONLY play out of the rear/center speakers, and NOT my front 2. In addition, the rear/center speakers are flakey - sometimes it plays, sometimes it doesnt.
    Help! Anyone have a solution or a step in the right direction?
    Edit: If its worth mentioning, under the Creative Audio Console -> CMSS 3D, before Windows 7 I had to option to mix CMSS 3D. Now the only 2 options are Off and CMSS. No CMSS 3d.

    ? Yeah, actually I found that a handful of the environmental changes work. For example, "small room" does work for me. However, it still is not very good. The environment effects for me make it very difficult to hear.
    Sigh - this is the only driver for me that does not work correctly under Windows 7 64bit.
    Hopefully there will be a new driver soon.

  • Audigy 2 ZS with 5.1, very low volume from front center spea

    I have an Audigy 2 ZS and Altec Lansing 25CN speakers (5.). The sound comes out fine from all but the front center speaker, from which I can barely hear anything. However, if I run the Creative Diagnostic and test the speakers, the sound comes out just fine. Tests in the THX Console work fine too. Anyone have an idea what's going on?

    I have an Audigy 2 ZS and Altec Lansing 25CN speakers (5.). The sound comes out fine from all but the front center speaker, from which I can barely hear anything. However, if I run the Creative Diagnostic and test the speakers, the sound comes out just fine. Tests in the THX Console work fine too. Anyone have an idea what's going on?

  • Re: Sound is very poor on MBP 2011, any solution?

    Hi,
    I have been trying to wach videos either through dvd or netflix, but sound quality is really poor. I have to use headphone, then only can hear the sound better.
    Anyone having same problem? or any solution for this?
    Thanks in advance.

    Hello,
    Yes.
    I did following:
    1) System Preference > Sound
    2) Sound Effects > internal Speakers
    I have kept output volume as maximum.

  • Sound from front speakers only with X-Fi in Game mo

    Hope someone can help me with this. I just installed the latest x-fi drivers for my xtreme gamer on a fresh install of xp and now in when in Game mode I don't get any sound from the rear speakers. When I switch to entertainment mode I get sound from all my speakers. I have a 4. setup and have checked that this is selected in both the creative audio console and the windows control panel.
    Is this a problem with the new drivers? Has anyone else got this problem or knows how to fix it's
    Cheers.

    you have to activate x-fi cmss 3d and try the options within

  • JMS Demo Not working!!!Very poor samples from Oracle.

    Hi i have installed the CHat JMS Sample into Oc4j.
    Everything was OK until i wanted to log into the chat application.
    Then on my oc4j consol the following occured:
    03/10/04 14:49:08 javax.jms.JMSException: TopicConnection[Oc4jJMS.Connection.bak
    desktop.e06940:f807230602:-8000.9]: cannot invoke method "setClientID" within th
    e J2EE container.
    03/10/04 14:49:08 at com.evermind.server.jms.JMSUtils.make(JMSUtils.java:1
    920)
    03/10/04 14:49:08 at com.evermind.server.jms.JMSUtils.toJMSException(JMSUt
    ils.java:2003)
    03/10/04 14:49:08 at com.evermind.server.jms.JMSUtils.toJMSException(JMSUt
    ils.java:1969)
    03/10/04 14:49:08 at com.evermind.server.jms.JMSUtils.assertNotContainer(J
    MSUtils.java:2427)
    03/10/04 14:49:08 at com.evermind.server.jms.EvermindConnection.setClientI
    Can anyone help? It is very sad because i experienced that most samples will not work if you only follow the install manual.
    regads,
    attila

    Hello Attila,
    It seems that you are using OC4J 10G to run the sample. The sample has been tested on OC4J 904 Developers preview. Please use this to run the sample application.
    This demo uses JMS 1.0 and OC4J 10G supports JMS 1.1. In JMS 1.1, you cannot call setClientID() directly within the J2EE container. Due to this inherent change in the spec, the Chat Demo does not work properly in OC4J 10G.
    This is a known problem and we are working on rectifying this.
    Thanks,
    Rajat

  • Very poor response from autharised service center "T Touch powered by HCL"

    i purchased my bbZ3 on 7 dec 2014 and after few months it started heating and reduces battry life, excessive heating and the main problem arises when sim card failed to detect  then i went to autharised service center t touch in new delhijob sheet no {REMOVED}, on 25/05/2015 my mobile seriaql number is {REMOVED},  compelet add is ground floor 114, veer savarkar block, vikas marg, shakarpur, delhi 110042 ,india. as my mobile phone is under warranty they refuse to repair it under warranty and said that it is sim card slot is damaged so they can not repair my mobile phone under warranty. after few days they said that my phone is not repairable and have to replace and i have to pay Rs. 6500 for it.
    pease help me , i did nothing to damage my mobile phone and its an internal damage please consider my request to give my phone back in good working condition as i purchased
    Mod Edit: Edited post to remove personal information to comply with the Community Guidelines and Terms and Conditions of Use

    not god sir,
    u sold ur mobile..
    and ur respociblity ends..
    people buying ur product are animals..
    veryy good.
    i salute u.
    and ur authorised service centers are realyy bloody devils.
    if this is user community then where is costumers geniune care.?

  • Very low volume from external speakers when watching Netflix

    MacBook Pro Why might external speaker volume be extremely low when it is turned up to max in Sounds and on F11?

    Do the external speakers have their own volume control?

  • I have a macbook pro but the sound is very low. I want speakers for it but do not want to spend a lot of money. Can I use the Jam wireless HDMX speaker

    I have a Mac Book Pro but the speaker on it is solow that I cannot even enjoy a movie. Does anyne know about the Jam Wireless speaker (HDMX) and if that will work on a computer?

    I have a Mac Book Pro but the speaker on it is solow that I cannot even enjoy a movie. Does anyne know about the Jam Wireless speaker (HDMX) and if that will work on a computer?

  • VFL Speaker sound from both the front speakers while FR sound is not coming out at all.

    I have a creative gigaworks s750 connected to a xtreme gamer sound card. The system was working absolutely fine but now it has started behaving very strangely; system is playing back Front Left Speaker sound from both the front speakers while Front Right sound is not coming out at all. If i click the front right speaker in audio console speaker setup wizard, no sound comes. However when i click the front left speaker, sound comes out of both speakers. I counter checked it with playing 5.1 dts movie and muting all the speakers except the front left one from ac3 filter, sound came out of both the front speakers. However when i muted all the channel except the front right, no sound was coming out of front right speaker.
    Message Edited by hussain on 06-10-2009 10:26 PM

    Just want to add another relieved reader of this thread.  I had lost the sound to my speakers even though I had sound to headphones. I was convinced it was a damaged headphone jack because I had pushed the headphone plug in harder the last evening when my wife complained that she could still hear the speakers while I listened with the headphones.  The next morning--no speaker sound.
    I spent a few hours searching the web to see how to disassemble a satellite A505 and get to the jack.  But I wasn't even sure I could get a proper replacement jack that fit, and I was concerned that small damage, say to the ribbon connectors could render the computer useless--a large price to pay for just missing audio.  
    Fortunately, I stumbled onto this thread and I recalled I had put the unit to sleep the night before--something I don't usually do, but I didn't want all the Chrome web sites to have to reload so I just put it to sleep.
    When I put it to sleep again and fired it up--Sound!  I am so glad to find this solution so I just want to let people know it remains a viable option.
    Doug

  • Please Please Help...My t6100 sound quality is very poor

    I cut the speakers wire to extend the wire to be make as home theatre. i cut four speakers wire and extend it. but i didnt cut the front right speaker which is enabled with sound control. after fixing it the sound quality is very poor other than front right speaker...any one knows please help and give solution....

    Hello button172
    If you are having an issue with your purchase, then report it to the iTunes Store.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Regards,
    -Norm G.

Maybe you are looking for

  • Logging the changes of a custom table into CDHDR and CDPOS

    Hi all,            What is the strucutre that is to be passed while creation of a ChangeDocument(Object Class) for the parameter Name of Ref. tab in SCDO tcode.And what other steps are to be done for logging the changes of a custom table.

  • Bapi to create quality notification with inspection lot and defects of char

    Hello experts, Can any body tell me how to create notification using inspection lot. regards Narendranath Reddy

  • Detecting the source of a method invocation.

    Within a given method, is there a way to detect what class/method made the invocation call? I need to find a way to modify instance variables within a method, based on the invoking class ... I thought of navigating back through the Stack, but I am wo

  • How do I backup a second iphone?

    I recently bought my wife her first iphone and need to know how to back it up to Itunes seperatley without interfering with my itunes account and backup info for my iphone.  Does anyone know how to do this so I don't overwrite my info and vice versa?

  • During conf-plant field in goods movement screen - to be didplay

    During Confirmation of a process order, in the goods movement screen, user can change the plant for a component...As a default it is copying the order header plant. Since it is a changeable field i.e. value can be changed , user is changing the filed