No sound, other issues with 5.0.6 Update

Help Please!!
I updated my Safari the other day to 5.0.6 and am still running 10.5.8. Now I have no internet sound on either Safari or Firefox. Perused the forums and followed a suggestion to play the keyboard on Garageband as a fix to earlier sound issues (crazy, but apparently it worked for others). Garageband has no sound now, either. iTunes, iMovie, and soundeffects (like the volume clicker) all work fine. I've run repair preferences, deleted the cache.dp file and still no luck.
A couple of times, Safari took about 5-10 minutes to load, showing nothing but a blank page and the spinning beach ball of death. I've also redownloaded and installed Safari, also to no avail. Any suggestions would be greatly appreciated. Thanks!
Steve

A couple of times, Safari took about 5-10 minutes to load, showing nothing but a blank page and the spinning beach ball of death
Could be a thrid party Safari add on that was compatible with the previous version of Safari but not 5.0.6 that's muting the volume and not rendering web pages.
Troubleshooting help here > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
If that doesn't resolve the problem, launch the Console app (Applications / Utilities). Commonly used for troubleshooting.
To view only messages related to a particular action:
Select the log file you want and click Clear Display in the Console toolbar.If the button is dimmed, it means this feature is not available in this log.
If you want to add a time marker to the log, click Insert Marker in the toolbar.
Perform the action you are interested in and watch the log display to see the messages generated by your action.

Similar Messages

Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

Take each of the following steps that you haven't already tried.
1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
2. From the menu bar, select
 ▹ System Preferences ▹ Sound ▹ Output
Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
5. Reset the NVRAM.
6. Reset the SMC.
7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
8. Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.

HT6030 Sound output issue with Mavericks

There is a sound output issue with Mavericks and Firewire800 Audio devices. I am using a MIO 2882 but now people are having issues with other devices as well. Is this something that will be addressed in an update? If not I will need to downgrade my OS.

maybe the adapter went bad.....fast. try getting one thats made by sony. or apple. i have had bad luck with some cheap products i bought.
or maybe thats the brand you have ad luck with. i remember when i use to get some quantom fireball drives, and they just died on me the next week. im down to two and keeping a good eye on them. especially fujitsu. the only ones i have GREAT LUCK with are Seagate and Western digitals drives.

Any issues with latest 2014 ios update & Straight Talk

Hi, I've been with straight talk for about 2 weeks without any problem - switching --porting--pics.....all went well . Now my phone ( iPhone 3c) shows iOS update waiting..
Due to all I have read here & there,I'm a bit uneasy to do the update. Has anyone had any issues with lates t2014 ios update using ST? Will it affect the working of the phone if I don't do update? Thanks for any input.

Hi, Glad that worked for you. I don't know why this is happening other than to offer an opinion. This hardware acceleration was causing an issue with the previous version of FP also. I think that this technology is ready but the websites are not, youtube included.
The same thing happened with Flash Player for the mobile phones, Android in particular. Adobe was ready but had to wait on Google to catch up. So the users thot Adobe was at fault, but that wasn't the case. Google had to update and that was done with their 2.2 update. This is not an opinion however. I followed this because users were coming here asking why Flash Player wasn't available for their Android:-)
Adobe/Microsoft/Mac/Linux are all involved and if one advances a particular technology that effects the others, then each one must make a change for that technology to work. At least that's how I see it.
Thanks for marking your thread as answered
Regards,
eidnolb

Sound / Audio issues with Google Chrome

Hi guys,
I have this audio issue with a new Macbook Air (2013 base model).
When I stream audio / video (eg podcast, YouTube, NBATV) via Google Chrome, there is the static or clicking sound which you could hear both through the built in speakers and through the headset.
Brought it in to the Apple Store yesterday and they acknowledged the sound on Chrome. HOWEVER when using Safari, this clicking / static sound is no longer audible. I can probably record an audio clip to demo this further. The genius concoluded that this is probably an issues with Chrome or codecs that its using rather than the actual laptop. No replacements at this stage.
I have an old MBA 11” where this issue does NOT occur.
The hesitation in using Safari is Flash. Some video streams such as NBATV, which I watch quite frequently use Flash. Chrome handles this quite well, with no separate installs required.
Has anyone else encountered this? Not sure if I can pursue this issue further with Apple.

Chrome shockwave flash plugin issue causing sound problems on the macbook:
Shockwave Flash 11.5 r31 (old version)
Shockwave Flash 11.5 r502
disabling r31 solved it.
Many people have checked their chrome plugins and found they had two plugins enabled. They disabled the older one and audio is perfect.
-Go to chrome://plugins
-Click and expand +Details in the Upper Right
-Check over the flash files.
-One is version 11.3.31.222
-Disable the odd version and reload the flash content
For some reason, CHROME has allowed two flash plugins to be enabled at the same time, and clearly the older version is the one causing the problems.
go to "Chrome://plugins" tab. Click “Details” at the upper-right corner of the page.
Find “Shockwave Flash” listing for the integrated plug-in on the page and click the corresponding “Disable” button. To identify the integrated plug-in, see the table of plug-in filenames above.
Find the “Flash” (or “Shockwave Flash”) listing for the system plug-in on the page and click the corresponding “Enable” button. To identify the system plug-in, see the table of plug-in filenames above.
disabling Shockwave Flash 11.4 r31 resolved the problem for most people.
When people double checked: if they re-enable Shockwave Flash 11.4 r31, ....the distorted / broken audio happens again.
Hope that solves it for you

Sound Card Issues with Macromedia Flash

I'm having issues with a clicking sound on some of the areas of my audio when I export to a quicktime file from Flash. After extensive research, I found at least one forum post addressing the issue saying that it could be that the Crystal Semiconductor CX84xx sound card that came with my G5 could need updated drivers. So far I've only been able to find an update for Windows Crystal Semiconducter, which makes me think that maybe there aren't any updates for this particular sound card for Mac?
I guess my question is, am I on the right track, and if there are updates for this sound card where would I be able to find them?
Thanks,
Jay

In particular, please see this bug report: https://bugbase.adobe.com/index.cfm?event=bug&id=3289908
With 11.2, do you ever get proper surround decoding? If so, can you point me to content that I can hear?
Thanks,
Chris

Imessage and other Issues with 3rd Gen iPad

Hi there, just got a 3rd Gen iPad for the mrs and so far it's been great.
However, several rather annoying issues have developed and I can't seem to find the right trouble shooting for it, so I thought I'd try here.
So here they are:
iMessage & facetime don't work
Issue 1- Each time she uses her Apple ID log in for either feature a message "iMessage Activation: Could no sign in. Please check your network connection and try again". I've checked the network settings, I've reset them on the iPad and yet it seems to persist. Her appleID is valid as it works on her iPhone, which is using the same network/Wifi as the iPad, yet the iPad seems to decide it doesn't want to activate. I've signed in on my appleID and the same message seems to appear
Issue 2 - When using apps like Chrome a constant message will appear "Connect to iTunes to use push notifications" every time the app is open. This has been done, it's been backed up and it has connected to iTunes, yet these messages still pop up each time chrome is opened.

I also am having issues with my ipad mini as far as imessage . sometimes it works fine . Sometines I receive ok but it hangs on sending . i have tried everything . I think the apple server is a mess Most times I can only send If i am replying to a message i received . If i try to start a message it hangs . No reason found

Has Apple addressed poor sound quality issues with new 160GB iPod classic?

I just bought a new 160GB iPod classic, replacing a perfectly good 80GB iPod Video (5.5), thinking that the newer one would be superior to my 3 year old model. I discovered that the sound of the new unit was flat and muddy compared to the older model. I found that the 5th gen iPod video was more "spacial", if that's an appropriate word to use; the bass was more present and more clearly defined, as was the rest of the sonic spectrum. I searched several forums to research this issue and while there were numerous references to this issue, all of the posts I found referred to the original iPod classics (80GB and 160GB) and not the later 120GB classics nor the new 160GB classics like the one I bought. Has Apple done anything to address this issue since the first classics were released or are the new ones still suffering from the same sound quality issues as the original classics?

Based on your observations here, they apparently have not changed the sound quality since the original 160GB classic. I noticed a clear narrowing of the sound stage (ambiance) between the 5.5G 80Gb and my 6G 160GB. You're describing the same characteristic. I don't own the newest 160GB version and came here today to see if it might have improved the sound quality back to the 5.5 spaciousness. Note that the 5.5G has a higher signal to noise ratio than the 6G, making it difficult for me to enjoy it through efficient balanced armature in ear monitors like the Shure SE530s or Ulimate Ears Triple.Fi 10s.

Battery not recognised - and other issues with 867MHz Ti Book

Ok - here`s my story - I wonder if anyone can give me advice
on what to do next.
A week ago I started having trackpad issues with my tibook.
On 2 consecutive mornings the trackpad seemed to have frozen, held down. So that it brought up menus if the mouse was moved over one of the bars at the top of the screen. I wasn`t however, able to `click` on anything. An external
mouse, when plugged in, also didn`t work, though I was able to navigate the display using the keyboard shortcuts.
The first morning this happened, the OS also appeared to reset itself. ie the screen display picture went back to its original state - and all of the applications that i subsequently opened gave me a first time user `welcome` message.However, all of my files/photos/music etc were intact.
When the trackpad was working I backed everything up, ran
the hardware test cd, which came up clear, and called apple. They picked up the computer, which is under
warranty, on Friday, and at the time it was working fine.
I got the computer back yesterday, but unrepaired, and
with a new set of faults. Apple told me that they had checked the computer and had found
some evidence on the logic board, power in and bottom case
of past liquid spillage - but no other problems with the
computer. I don`t deny the liquid spillage ( a few ml of
water), although it
occurred 11 months ago and I have not had any problems with
the computer since 24 hours after the spill.
The state of the computer now that Apple have sent it back
is as follows: The trackpad is working. However, the computer is not recognsing the battery, or the wireless
networking Buffalo pc card. The clock also resets one out
of every 2 or 3 times that I restart the computer. These problems did not occur before I sent the computer to Apple.
Yesterday I erased and reinstalled 10.4 just in case that had
something to do with it - but it has not helped
So - my questions.
1. Could my current problems be to do with the spillage
on the logic board 11 months ago?
2. Could my new problems be to do with something that Apple
did when testing the computer this week?
3. Is there anything else that I should try in order to solve the issues that I`m having with the computer?
4. If it is a logic board problem, can anyone recommend
a UK repair centre that would deal with this cheaply (otherwise i will probably buy a new computer - as this
one is coming up for 3 years)?
Thanks,
Antony

Hi Antony,
1. Could my current problems be to do with the spillage
on the logic board 11 months ago?
Yes. Corrosion occurs over time, and it could have taken 11 months to reach "critcal mass."
2. Could my new problems be to do with something that Apple
did when testing the computer this week?
Theoretically, any time anyone does anything inside your PB, they could have caused additional issues, however, this would not be "normal."
3. Is there anything else that I should try in order to solve the issues that I`m having with the computer?
4. If it is a logic board problem, can anyone recommend a UK repair centre that would deal with this cheaply (otherwise i will probably buy a new computer - as this one is coming up for 3 years)?
Before paying for a new LB or a new PB, try a PMU Reset and Test PB Backup Battery.

Weird graphics and other issues with internet explorer in all versions.

One of our laptops has an issue with their Internet Explorer. First, whenever the user logs on and starts internet explorer and navigates to any website, the website loads for a bit but then immediately displays a "Page cannot be displayed" error.
Every single time. If we try browsing again/refreshing the page it loads fine. But during regular browsing, we might get that page again.
Another issue that happens is sometimes the graphics logos won't load properly. See screenshot:
http://i.imgur.com/0usOPpu.jpg
And this happens a lot. If this won't happen, the websites will only load with half its formatting missing.
Now we have:
-Thoroughly checked computer for viruses. Several full scans have been done with MalwareBytes with no issues found. Microsoft Security Essentials has been installed, full scan done, no viruses/spyware/adware found.
-We have tried upgrading to IE11. Same issue. Downgraded to IE10. Same issue. Downgraded to IE9, same issue yet again. IE was Reset each time.
We checked if it could be a network issue, but none of the other computers connected to the same switch has issue like that.
Any suggestions/ideas to try?

Hi,
I suggest you temporary disable antivirus and firewall, then check the result.
You may try the steps from the links below to check the issue:
"Internet Explorer cannot display the webpage" error
http://support.microsoft.com/kb/956196/en-us
Internet Explorer "Page Cannot be Displayed" error due to Bad Proxy Server Timeout
http://support.microsoft.com/kb/2551554
You may also refer to the computer or device manufacturer website and try installing the latest version of chipset, graphics card and video card drivers and check.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Issues with ios 8.3 update on iPhone 5

After updating my iPhone 5 to ios 8.3, I am unable to stream purchased music and videos from iTunes or any podcasts. I also can not stream videos on YouTube, Netflix, or Safari. Nothing works on both Wi-Fi and my normal data. If I could I would try to turn off the phone and restart but unfortunately my iPhone 5 is one of the ones that has the faulty lock button that needs to be repaired. But besides that, has anybody else been having issues with streaming music and videos?

i'm looking for people with problems on iphone 5 with 8.3 because i'm still on ios7 and considering to upgrade
but if you have problem with turning off the phone,
you can set up "assistive touch" from setting > general > accessibility > assistive touch (down the bottom)
you can also set this on the accessibility shortcut for the triple click on the home button to show/hide the assitive touch
you'll see a black circle floating on the screen somewhere. you can move this thing around if it blocks what you want to see/tap
now to turn off your phone you can tap the assistive touch button > device > tap and hold the 'lock screen' icon until the power off slider comes up.
so you don't really have to fix the lock button

Acrobat 9 Pro issues with printing and now updating !!! :(

hello
I had an issues with printing from my gmail account or from windows live mail
so I made a complete re-installation
now I am stuck with version 9.3.0 and when I check for updates I get a message
UPDATER IS ALREADY RUNNING
only... it's not running and nothing is updating !
I made a restart... just in case... it did not change anything
as to the printing issue, in case some of you have met it and cleared it...(hope)
this was with version 9.5.0
I get no error message but no pdf is created, only a text document with this :
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
72gmvi not found, using Courier.
44dcmta not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: xshow ]%%
Stack:
[96 96 97 72 96 42 64 0]
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
not a good start for my week... I hope yours is nicer
I'm running Win7 Ultimate x64

thanks Mylenium
the font association problem is something recent though, since I used acrobat to print mails directly from my gmail account previously...
it's galling but I installed a free pdf printer which does the job, I needed copies of these mails urgently !
as to the update issue, I see no aum.exe, msiexec.exe or setup.exe running... but that's quite above my head... do I look for those exact processes or are they generic names for processes ?
does my question make sense ????

Possible Issue with Latest Office 2001 Update

In the last few days my MB Air mid-2013 with Mavericks did an Office 2011 update to Version 14.3.9. Today I used it for the first time and Excel crashed each time I tried to use it. To get the job done I had to revert to the earlier build (version 14.3.8) from a backup and that appears to work normally.
I don't know if this is an issue with Mavericks or if the update to 14.3.9 would have crashed with ML, too. Nor do I know if Word would have crashed since I had to get the task in Excel done before an appointment.
Phil

Apparently cannot edit the above. Title should have Office 2011, not Office 2001
Phil

If you are having WIRELESS issues with SNOW LEOPARD.. update your software

the latest osX update seems to have fixed the wireless issue with snow leopard

I never had an issues with wireless before. Still don't. What was the problem?

Mail formatting issues with 1.1.1 update

With the 1.0.2 firmware HTML-formatted e-mail displayed correctly, if a bit too small to read, just like web pages do. Just like web pages, I could double-tap on - say - a table or a bit of text to zoom in and/or use pinch gestures to zoom in and out.
Now when I look at the same e-mails that looked so good in 1.0.2, my iPhone re-formats and re-flows the e-mails into gibberish, kinda like PocketIE does on Windows Mobile. One e-mail (a hotel registration confirmation) had the header re-flowed into 60 or 70 lines of one character each. The daily status messages I get from my SBS2003 server - which were completly unreadable on my old XV6700 with WM5 - looked great on 1.0.2. With 1.1.1, the tables are scrunched up, many text fields have a second or third line with one or two characters on them, ect.
Anyone else notice this? It's annoying enough that I'm almost willing to give up the other 1.1.1 features to get my mail working right again.

Solved the problem with bit locker (and refresh and reset and a couple of other things that rely on the windows boot manager by reinstalling windows (went to Windows 10). That also solved my issues with high Cpu when playing YouTube videos and photoshop crashes due to the fact that Windows 10 loads the latest Intel drivers.
Unfortunately the issue of Bluetooth mouses freezing still happens, though only twice yesterday, so that's an improvement.

No sound, other issues with 5.0.6 Update

Similar Messages

Maybe you are looking for