No sound out of left on speakers

There is no sound out of the left on speakers on my iPhone 4s.
I didn't upgrade to IOs 6. It's still IOs 5.1.1
When using earbud it works L & R.
I made sure Mono Audio is Off and the slider is centered betweel L & R.
Maybe a problem on left speaker?

You mean the two bottom speakers - the one at left is a microphone, the other at right is the speaker?
I didn't know about that. I thought both were speakers.
Thanks for the help.
Luigi

Similar Messages

Sound out of both rear speakers when I test back left, but nothing when test back rig

Hi All
This has probably been posted before but I can't find the answer.
I have a sound blaster x-fi Fatalty platinum card (just upgraded from extreme music)and I am having trouble with sound settings on my speakers. (this happened with the music card to). When I run the speaker setup i get front right,left,center and sub perfectly fine but when it comes to the rear thats another problem. When it says rear right there is no sound of the rear right speaker, when it says rear left I get sound out of both rear speakers.
When installing the platinum I uninstalled the drivers and program both in windows xp and vista (I have a dual boot machine) and reinstalled from scratch but it still does this. (this happens on both windows)
I have a set of Logitech 5500 speakers connected by analog and no digital connection as I use it for games only. On the speakers it is set to Direct input with the effect as 6 channel(which is the way I have always had it when it was working).
My system specs are: Intel 6850 dual core cpu, X-FI extreme platinum, EVGA 8800 GTX video card, 2 gigs of ram, Win xp/Vista premium dual boot, Logitech 5500 5. speakers, Dell 24 inch LCD Monitor.
Any help pointing me in the right direction would be great.
I thank you all in advance.

Hi All
This has probably been posted before but I can't find the answer.
I have a sound blaster x-fi Fatalty platinum card (just upgraded from extreme music)and I am having trouble with sound settings on my speakers. (this happened with the music card to). When I run the speaker setup i get front right,left,center and sub perfectly fine but when it comes to the rear thats another problem. When it says rear right there is no sound of the rear right speaker, when it says rear left I get sound out of both rear speakers.
When installing the platinum I uninstalled the drivers and program both in windows xp and vista (I have a dual boot machine) and reinstalled from scratch but it still does this. (this happens on both windows)
I have a set of Logitech 5500 speakers connected by analog and no digital connection as I use it for games only. On the speakers it is set to Direct input with the effect as 6 channel(which is the way I have always had it when it was working).
My system specs are: Intel 6850 dual core cpu, X-FI extreme platinum, EVGA 8800 GTX video card, 2 gigs of ram, Win xp/Vista premium dual boot, Logitech 5500 5. speakers, Dell 24 inch LCD Monitor.
Any help pointing me in the right direction would be great.
I thank you all in advance.

Sound out reverts to internal speakers at every shut down

Everytime I turn on my Mac Pro I have to go to System Preferences and change the sound to Line out. Every time I shut down the sound out defaults to the internal speakers. is there anyway to stop this?

Things you can try.
1. Smc and pram resets.
2. See if you can get it to "stick" by setting the sound out preference with Audio MIDI Setup (in your Utilitiles folder).
3. Last resort -- temporarily remove the two plists in /Library/Preferences/Audio.

Sound out only left side.

I only get sound out of the left side of my headphones. I have all ready made sure the headphones are not broken (tested in another iPod Classic). I am fairly certain my iPod requires service, but figured I would check first. Also if someone could point me where I can go about setting up sending my iPod in it would be appreciated.

Hey there,
The problem could just be a bad contact, but sadly there really isn't anything you can do to resolve the problem.
If your iPod is still covered by its warranty consider setting up a mail-in repair for your iPod at http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
Otherwise, if no warranty, there are numerous 3rd party businesses that will dianose the exact problem with the iPod and repair it. Just do a simple google search for "ipod repair parts" and you should recieve a plethora of sites that can help you. I would recommend doing a bit of looking around before choosing one.
Here are a few good ones.
http://www.ipodresq.com/index.php
http://www.ifixit.com/
http://www.ipodjuice.com/apple-ipod-repair.htm
http://www.ipodrepair.com/
Hope this helped.
B-rock

No sound out of left speaker, and right speaker is extremely quiet

Hello,
I have an HP Pavilion DV5 Laptop. I'm having issues with my speakers, and am looking for help. My speaker on the left won't play anything, and the one on the right is annoyingly quiet. When I plug in headphones they work perfectly fine.

Hi Wumbo-Wizzard,
Welcome to the HP Forums! I understand that you are having a problem with the sound coming out when you connect the speakers. I will try my best to help you with this issue. To better guide you, could you please give me the model number of your notebook and the operating system that you are running on it. Here is a guide for How Do I Find My Model Number or Product Number?
In this document for Troubleshooting Sound Problems with External Speakers and Headsets in Windows 7 are steps that may resolve this issue.
I hope this information helps, please let me know.
Thank you,
I worked on behalf of HP.

No metronome sound out of the internal speakers

Hi everybody,
there's no metronome sound coming out of the internal speaker of my Mac while playback.
All settings are fine (play while playback, use internal speakers, "Klopfgeist" switched off) and it worked well with the same settings in Logic Express 7.
Please help!
best regards

yes, its set on All.
The Klopfgeist sound comes via the Interface with the rest of the sounds, but it should be only on the internal speakers (earohone)
It's a setup for live-performance (drummer gets the Click via earphones), sound via interface for the audiance

I am unable to get any sound out of my internal speakers and no options to use them are available. Plus the mute box is ticked and greyed out and will not untick

How can I get sound from my internal speakers. I have not set or adjusted any sound levels but all sound is muted and am unable to untick the mute box. I had sound when I bought the machine but now nothing, not even an option to select internal soeakers in Souns setup!!

1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
3. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

Sound 'out' is reset to "Internal speakers" after any restart.

I'd prefer it would stay assigned to "line out" but this won't happen. Has anyone experience with this mystery?

Sound out reverts to internal speakers at every shut down
Sound output reverting to internal speakers after restart

When I plug my new Iphone 5s into my car aux it will only play out of the left hand speakers, does anyone else have this problem or have a solution?

When I've plugged my phone into my car auxiliary cable it only plays out the left hand speakers. If anyone has any ideas or solutions to the problem I'd be very grateful.
L

there are two ways, usually if u restart the phone it will reset, but the other is going to your system and shut it off manually...

DDL or DTS = no sound out of rear speak

I have a sb xfi plat with optical out going to a dd/dts reciever and every time i play an mp3 i only get sound out of the front speakers and not my rears, is anyone else having this issue?

bigjohns97 wrote:
Thank you for the responce, however with every other DDL / DTS connect (nforce2 soundstorm,?blue gears, auzentech) you could enable DDL or DTS connect and any stereo source would automatically be 5. or 6. surround sound. See below.
MP3 source -> real ddl/dts connect sound car?-> dolby digital / dts stream -> external reciever with dolby digital dts light on +sound on all speakers
On the sound blaster the following happens
MP3 source ->?sb xfi plat -> dolby digital /dts stream with only 2 channels being used?-> external reciever with DD or DTS light on + sound from only front speakers.
Are you telling me this is how?creative designed this to work because?it isn't working like?every other DDL / DTS connect card out there.
I don't kow how and where exactly the defferences are between those solutions. But as I told it, it is the way the Creative implemention handles it. If you don't use CMSS-3D or use the surround functions of you Decoder (I have a seperate balance for "surround" on my Z-5500 where I can set If the rear speaker are used *at all*) you won't get automaticly Surround Sound with MP3. Of course it still depends a bit on you player software, there are player/filters (AC3 Filter; ffdshow) out there which can do that too. Upmixing Stuff, I mean but then you don't really need DDL. I use it to encode actual game sounds, because strangely I don't have any popping and noise in there while I use it (just read up that crackling/popping thread.

Sound problem - internal or external speakers

I have a mini and a USB hub (Belkin) with a USB headset (Plantronics) connected to it, and then a display (FujitsuSiemens) with speakers connected to the sound port on the mini.
My problem is that some applications (Safari, RealPLayer, MS Remote Desktop) favors the headset for sound out, others (iTunes, Mail, well most apps actually) chooses the speakers in the display which I'm very pleased with.
System Preferences states sound out in the internal speakers, but obviosly it doesn't really work with som apps so my question is: why, why, why Mr Anderson...
Is it some plist that has gone heywire or do I need to reset some weird PRAM or what ever...

You may need to reset PRAM/NVRAM.
First, check that the jack is clean. Put some alcohol on a plug and insert it a few times. See if that helps.
is your output both digital and analog? If digital, is the red laser light visible in the socket? Do not look directly into the socket when checking.
If all else fails try a PRAM reset:
Reset your computer’s PRAM
A small amount of your computer’s memory, called “parameter random-access memory” or PRAM, stores certain settings in a location that Mac OS X can access quickly. The particular settings that are stored depend on your type of Mac and the types of devices connected to it. The settings include your designated startup disk, display resolution, speaker volume, and other information.
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
DO NOT HOLD These keys beyond the second startup sound!
Release the keys.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.

Unbalanced sound with 2 speakers - almost all coming out the left spea

My Audigy SE card with 2 speakers (one Altec Lansing with the amp in and the other a decent 6 ohm Infiniti) puts nearly all the sound out of the left speaker (the Infiniti). I couldn't find a balance control in the Creative mixer and had to go back to control panel sound to crank the balance wildly to the right. I realise the speakers aren't matched but they worked just fine until I re-installed Windows and all my Creative software last week.
I haven't tried recording yet but I hope that will be in balance.
CRIKEY! While I was typing, the right speaker suddenly cranked itself up. Bit odd. Just in case this is a Creative problem, I will post it anyway.

Did you ever fix this problem? I have the exact same thing happening to my sound.
All the sound comes from the left in stereo sound. I plugged the green stereo analog speakers into the other pin the blackone for 4. setting on my SBLi've24 allthe others play fron t left back left and back right but the front right is so soft like a whisper.
So the speakers work. Im running a Xp mediaedition system. It happened after an apparent sound conflict that made an electronic popping sound which got progressi'vely worse until i figured out how to reset the car d in the Bios level. I have done evrything but reformat the hard dri've All tests say the hardware is working but still no front right channel. Help please

VFL Speaker sound from both the front speakers while FR sound is not coming out at all.

I have a creative gigaworks s750 connected to a xtreme gamer sound card. The system was working absolutely fine but now it has started behaving very strangely; system is playing back Front Left Speaker sound from both the front speakers while Front Right sound is not coming out at all. If i click the front right speaker in audio console speaker setup wizard, no sound comes. However when i click the front left speaker, sound comes out of both speakers. I counter checked it with playing 5.1 dts movie and muting all the speakers except the front left one from ac3 filter, sound came out of both the front speakers. However when i muted all the channel except the front right, no sound was coming out of front right speaker.
Message Edited by hussain on 06-10-2009 10:26 PM

Just want to add another relieved reader of this thread. I had lost the sound to my speakers even though I had sound to headphones. I was convinced it was a damaged headphone jack because I had pushed the headphone plug in harder the last evening when my wife complained that she could still hear the speakers while I listened with the headphones. The next morning--no speaker sound.
I spent a few hours searching the web to see how to disassemble a satellite A505 and get to the jack. But I wasn't even sure I could get a proper replacement jack that fit, and I was concerned that small damage, say to the ribbon connectors could render the computer useless--a large price to pay for just missing audio.
Fortunately, I stumbled onto this thread and I recalled I had put the unit to sleep the night before--something I don't usually do, but I didn't want all the Chrome web sites to have to reload so I just put it to sleep.
When I put it to sleep again and fired it up--Sound! I am so glad to find this solution so I just want to let people know it remains a viable option.
Doug

Sound out of only Left speaker

I've got an 2006 black MacBook that's been out of Apple Care for over a year now and this is the first major problem that I've had with it since AC ran out.
I literally closed my computer to go to work, after watching a couple of youtube videos, speakers working fine.
I get back and all of the sudden only the left side of the internal speakers is working.
I restarted and ran OnyX, but still only getting sound from the left.
What's going on?

never mind, it's working now.

Why is my bluetooth speaker connected but sound only comes out of the computer speakers?

My bluetooth speaker (JBL Charge 2) is shown as "connected in the blu tooth section of the task bar. I have also gone to system preferences and the speakers are also shown to be connected and chosen as the main speakers. However, no sound comes out of the bluetooth speaker but rather the sounds still comes out of the computer. speakers. I have tried connecting, reconnecting, and restarting computer. The bluetooth speaker is also shown as connected in bluetooth preferences. What is wrong?

I have tried to connect and Jambox and have the same problem; bluetooth speakers are connected and chosen but sound comes out of computer speakers.

No sound out of left on speakers

Similar Messages

Maybe you are looking for