No sound out off my speak

just installed my new Sound Blaster X-FI card on my computer. And i have put the right cables in it. And now i dont get any sound of my Trust 4500P 5. speaker set and i also dont get any sound out off my Headset.plz help to solve this problem

I had the same problem..all of the sudden my analog outputs didnt work, i un checked digi i/o and checked it and unchecked it, only the digi i/o jack worked lucky for me my speakers take both analog and digital. i found if you go into the THX setup and mess around in there, the analog ports will?work again.

Similar Messages

  • DDL or DTS = no sound out of rear speak

    I have a sb xfi plat with optical out going to a dd/dts reciever and every time i play an mp3 i only get sound out of the front speakers and not my rears, is anyone else having this issue?

    bigjohns97 wrote:
    Thank you for the responce, however with every other DDL / DTS connect (nforce2 soundstorm,?blue gears, auzentech) you could enable DDL or DTS connect and any stereo source would automatically be 5. or 6. surround sound. See below.
    MP3 source -> real ddl/dts connect sound car?-> dolby digital / dts stream -> external reciever with dolby digital dts light on +sound on all speakers
    On the sound blaster the following happens
    MP3 source ->?sb xfi plat -> dolby digital /dts stream with only 2 channels being used?-> external reciever with DD or DTS light on + sound from only front speakers.
    Are you telling me this is how?creative designed this to work because?it isn't working like?every other DDL / DTS connect card out there.
    I don't kow how and where exactly the defferences are between those solutions. But as I told it, it is the way the Creative implemention handles it. If you don't use CMSS-3D or use the surround functions of you Decoder (I have a seperate balance for "surround" on my Z-5500 where I can set If the rear speaker are used *at all*) you won't get automaticly Surround Sound with MP3. Of course it still depends a bit on you player software, there are player/filters (AC3 Filter; ffdshow) out there which can do that too. Upmixing Stuff, I mean but then you don't really need DDL. I use it to encode actual game sounds, because strangely I don't have any popping and noise in there while I use it (just read up that crackling/popping thread.

  • Sound out of one speaker only

    Sound has started to come out of one speaker only. i've checked cords to amplifier etc etc and that is not the issue,. Anyone else had this problem?

    Hello adyomo. Welcome to the Apple Discussions!
    Please try connecting a pair of stereo headphones to the audio port of your AirPort Express Base Station (AX). If you now get sound from both channels, the problem may still be either with the cables or the amplifier. If; however, you are still only getting sound from one channel, either the AX's audio port or its audio circuitry may have failed.

  • HT201401 sound out of ear speaker very low turned up all the way sounds muffled

    can barley hear out of ear speaker with music or on calls loud speaker works fine ear phones work fine just ear speaker very quiet tried restore from itunes no help do i need to replace the ear speaker or is there something else i could try, tried sucking on speaker and blowing it out no help.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • No sound out of one speaker...

    Hello, all! My iPod recently suffered a nasty blow, which deformed the case and seemingly knocked the sound out of the right earbud. I've tried a different pair of headphones, but still I get nothing out of the right earpiece. I also tried resetting the iPod (toggling the Hold switch, holding the Menu and Play buttons), but that didn't do anything either. Do you think it's a problem with the internals, or do I just need to restore this thing? Is there a way to toggle between mono sound and stereo sound (maybe it was jarred into mono mode)? If it's a problem with the actual iPod, will Apple even fix it for me? I'm having one helluva time initiating service through this website -- should I call Apple at 1-800-MY-APPLE and talk to someone directly? Thanks in advance!
    Nano (1G)   Windows 98  

    I was informed this afternoon that my iPod cannot be fixed. Thanks for all your help, people.

  • Not getting sound out of a speaker with my Zen Xt

    I've had my Zen Xtra for 5 months. I've enjoyed it every day. But today, I began listening to it and to my surprise, no sound came out of the right speaker! It wasn't my headphones, as I soon found out. It is my Zen Xtra. I've read around this site and found to my great disappointment that there is nothing that can be done about this. This obviously didn't make me too happy, as it seems that I spent a good deal of money on a portible hard dri've. I've heard of things like this happening before with creative MP3 players. In fact, I've had two of my friends who had the same thing happen with their Zen Micros. I don't know how commonly this happens, but I'd assume it happens enough if you said something about it in the FAQ. This is a major blow to my customer satisfaction. I figure I've got a few options:
    ? Return my Zen Xtra for an insane fee (about half the price of it minimum) for it to be repaired, although this shouldn't have ever happened
    ? Attempt to fix it myself, which probably won't turn out too well
    ? Li've with it, but no longer recommend it to anyone or show it off in public again, and slowly save up for a product that works better
    Gi'ven my options, I'll probably just li've with it, but seriously Creative, this is a problem on your part if it keeps happening very often. More than one person that I know has been swayed never to buy MP3 players from you again. Don't get me wrong, they are great. But you're obviously messing something up with the headphone jack.
    Oh, and if anyone knows of a way to fix this, please help me do so.

    The early Xtras and Micros are well known for developing this fault, although at what level it's hard to say.
    I'm not sure where you are (or not) in the warranty period, but even if out of warranty I would contact Creative and point out this is a known fault. If you get nowhere with this you can attempt a repair, but I would strongly recommend only those with surface mount soldering experience try it. There's a page here on how to do the repair, but I'm having problems loading it at the moment. So it may not exist any more.

  • No sound out of left speaker, and right speaker is extremely quiet

    Hello,
    I have an HP Pavilion DV5 Laptop.  I'm having issues with my speakers, and am looking for help. My speaker on the left won't play anything, and the one on the right is annoyingly quiet. When I plug in headphones they work perfectly fine.

    Hi Wumbo-Wizzard,
    Welcome to the HP Forums!   I understand that you are having a problem with the sound coming out when you connect the speakers. I will try my best to help you with this issue. To better guide you, could you please give me the model number of your notebook and the operating system that you are running on it. Here is a guide for How Do I Find My Model Number or Product Number?
    In this document for Troubleshooting Sound Problems with External Speakers and Headsets in Windows 7 are steps that may resolve this issue.
    I hope this information helps, please let me know.
    Thank you,
    I worked on behalf of HP.

  • Getting sound out of my speak

    Hello everyone, now that I've got your attention, I moved my computer equipment from one room to another. I THOUGHT all I had to do was plug in the green plug from my sub woofer into the output (labeled GREEN) on the back of my PC and voila! the music would come flowing from my speakers...well... I have the Creative SB X-Fi sound card installed, so I figured I must be wrong, the green plug needs to be plugged into the Creative card! So, I tried EVERY hole in it! And, guess what, NO SOUND! Now, I know all the experts are just going to laugh...but I'm just irritated with myself that I ever UNPLUGGED the **bleep** cord from the back of the computer! Can any help me...is there something else I need to do? Thanks!
    Pat M?

    There is no left speaker... the grille on the left is for the microphone.

  • Need all sound out of both speaker, no stereo

    How do i get all the tracks of the audio to come out of BOTH speakers. I want all sounds to come out of both speakers exactly the same. Ideas?

    You have recorded your tracks in stereo. Switch them to mono.
    To record stereo tracks you would need two input sources (two mic's left and right). If you record from one guitar or one mic that will be mono.

  • My ipod touch keeps turning the volume down by its self  and when i try to turn it back up it wont let me also when the sound is off the speaker that comes up when you turn it on down on the screen wont go it just stays there it doesn't go!Any ideas why?

    I got my ipod for christmas this year its the 4th generation.It keeps turning the volume down by its self,when i try to turn it up it does not work. It wont let me i dont know why so i cannot play music on my ipod which defeates the reason i got it.Also when it turns the volume down its self or i on the rare occasion that the volume works and i turn it down the speaker comes up and will not go.It stays there which is making my ipod difficult to use.Its been doing this for about a week now.I used it alot and i feel lost without it haha. Does anyone know why its doing this? Or a way i can fix it? I've cheaked for updates and there is none!
    Thankyouuu
    it looks like that when it is locked and when its unlocked it looks like this

    Have you checked the volume button? It might be physically stuck. To determine whether a hardware repair is needed, you need to follow these steps:
    1. Try doing a hard reset:
    Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
    After that: test the device to see whether the issue is solved.
    2. If the issue is not solved, you should backup the device and restore it as new.
    In that case, use: http://support.apple.com/kb/HT4137
    NB: set up as a NEW device because a software issue will be in the backup.
    If the issue persists after restoring as new, you should offer the device for service.
    If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
    Good luck
    Stijn

  • Can I force sound out of speaker on ipad?

    headphones broken off in the headphone jack. Can't get them out. Is there a way to force sound out of the speaker?

    No.

  • Why does sound only come out of 1 speaker when I dock my iPod?

    My son's Ipod only plays sound out of I speaker. When I dock the ipod on his ihome radio or my sony radio, sound only comes out of the left speaker. When I put other ipods on the same docks i get sound out of both speakers. It is just this one ipod that won't produce sound out of both speakers, no matter what docking station I use.

    Likely it is a hardware issue for the iPod, you need to bring it for service

  • Sound only in One speaker

    Got a new computer with VIA KT333 KT3 Ultra series and loaded on Windows 2000 professional.  Everything works fine except can only get sound out of one speaker.  Tried re-installing the audio driver.  Tried all speaker configurations in control panel under multimedial.  Tried three different sets of speakers.  No warning in the system devices in control panel.  Thinking the MB may be bad.

    Hi,
    A couple of generic things you could try, but might not apply to your specific mobo.
    First, make sure that the plug is fully plugged in to the socket. Those 3.5mm plugs don't leave a lot of room for error, and sometimes a combination of the plastic on the plug and the metalwork surrounding the socket will prevent the plug from going in all the way. This is more likely to affect the right channel. (I assume that in trying 3 sets of speakers, there wasn't a common faulty lead involved).
    The second thing to look at depends on your computer setup. Many (but not all) MSI mobos have a 10 pin header called (for example) Front Panel Audio Connector: JAUD1. This lets you connect to an Audio Out socket on the front panel, as an alternative to the rear panel outlet. The audio outputs connect first to the the front panel (green) socket, with a return circuit for each channel which is automatically disconnected when you put a plug into that socket. So the audio out signals travel in lovely unshielded cable from the mobo to the front panel and back, before going to the back panel. If you don't have a front panel socket (and cable to suit), then you have to put a couple of jumpers across (for example) pins 5 & 6, and 9 & 10. If one of these jumpers is missing, you will only get one channel out. You could also lose a channel if there is a fault in the cable taking the signal from the mobo to the front panel, or the return cable, or in the switch contacts of the front panel socket (or in the rear panel socket contacts, for that matter).
    So, if you have a front panel audio out - try that and see if you get both channels. Also, check the wiring from JAUD1 to the front panel. You could also try removing the cable from JAUD1 and installing a couple of jumpers instead (check the mobo manual). If you don't have a front panel audio out, check that the 2 jumpers are on JAUD1. You could even try cross connecting the JAUD1 pins (5 to 10 and 9 to 6) and seeing if the missing channel changes or not.
    Also, try a few different audio sources (CD playback, playing .WAV or MIDI files, using Line Input - and check the advanced options in the Audio Mixer controls to make sure the Balance controls are centred.
    I hope this helps.
    Cheers

  • Strange sound out of speaker after sleep, no switch off

    Hello,
    just minutes ago, when I woke up my G4 800 QS, OS 10.4.9, after about one hour sleep mode, there was a beeping sound from the speaker, that did beep...beep....beep in a frequenz of about 60 to 90 beeps/minute. I could operate the Mac, but there was no information about errors, just a transluctant gray speaker sign that appeared on the screen, similar to the one that appeares when you push the eject button for the dvd-drive. I had no chance to turn the beep off. When I opend systemcontrol and marked the sound off field, the sound was off for about 2 seconds and then the sound was automaticaly turned on again. I did a restart, and everything was alright again and quiet as an hour before.
    I use Macs for 10 years know, but I have neither heard that sound nor seen that transluctant speaker sign in that time.
    Does anybody have an idea what that was or what that ongoing beeping means?
    Regards
    Oliver

    That's a strange/new one. Do you have the latest update for your version of OS X?
    In addition to that I'd try repairing permissions, go to Applications/Utilities/Disk Utility and select your drive and click "Repair Permissions." This doesn't really sound like something that that could fix but you never know. After that we could try deleting the sound preference list but I don't have a Mac now until Apple puts the new iMacs out so someone will have to aid you with the location of the file.

  • I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

    I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

    Hello, since nobdy else has replied...
    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

Maybe you are looking for

  • You have insufficient privileges for the current operation-Getting error running OAF page in R12

    I have a custom OAF page in R11 which is working fine. Same page is giving below errors in R12. Any suggestions how to resolve this issue..please advice. [167]:STATEMENT:[fnd.framework.webui.OAPageSecurity]:MAC validation status = false    [167]:STAT

  • Created theme is not working...Please help

    Hello sirs, I have configured a portal application to PCD, created iViews, pages, assigned it to a workset and workset to a role.  I have also created a theme, Desktop page and rules for the created role (In System Administration->Desktops and Displa

  • Wav file attachements

    My home VOIP system notifies me with an email that voice mail has been received and attaches the voice mail message as a wav attachment. Is there any way of listening to these wav attachemnts on my iPhone? Thanks

  • Connector replacement?

      Bought an MSI G4Ti4200-VTP8X and it was missing the tv-out/video-in 1-to-4 connector... I don't want to return it as I already got rid of my old Radeon8500 and dont have another board to use... is there anywhere I could pick up a replacement connec

  • Exporting as Vector image?

    Hey, I need images to be set as vectors for when i send them to get a tee shirt made. Is this possible out of fireworks? Thanks A LOT -Aaron