No sound output help

plz help someone ....
I have hp g6 2312ax
there is no sound in my laptop
I took it to the hp service centre and they said that audio port on mobo is damaged
motherboard need to be replaced.
I have two audio device
1. amd
2. idt
is there any way I can get sound output
This question was solved.
View Solution.

Hi legendary92,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I saw your post regarding the motherboard problems. If the HP service centre has told you that audio port is damaged you will have to replace the motherboard if you want sound. Page 75 of the Maintenance and Service Guide will show you how to replace it. The part number for your motherboard or system board as they are called in notebooks is 683031-501. You can order the part from HP PartsSurfer just search for the part number.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

Yosemite is messing with my new Retina Macbook Pro's sound output, help.

I just got my new Retina Macbook Pro 2 months ago and have been noticing some audio output issues. When I try to connect an external third-party audio device to run my KRK monitors my computer does not recognize the device and will not switch the audio output. After trying to set it manually my macbook won't even revert to the internal speakers for output and then I have to reboot my pro in order to get audio output again. This will happen randomly throughout the day after my computer has been in sleep as well, and sometimes the volume buttons get greyed out as well. Please help me with this issue as this is a new computer and it is becoming a nuisance. Even when connecting through HDMI, my audio output does not function and no sound will come out of the TV. I realize that this is probably a Yosemite glitch, but I just need to know if there is any fixes for this issue. Thanks so much for your time,
Sam Migliazza
<Email Edited by Host>

You are entitled to 90 day telephone support from Apple. Try contacting them.
Apple Support Contact
Apple Support contact - Telephone

My audio/sound has been erratic for a while and now I have no output Help!

My audio/sound has been erratic for a while, both output and input, sometimes one would worked but not the other and sometimes both would be none excitant.
System preference does not show what I have connected aka external speakers or headset and the sound output in menu is grayed plus the output on system preferences output as well, sound input looks ok now.
Had Tiger, so I upgraded to Leopard to see if that would helped, Output use to come back after a while, however now input works but output hasn't worked for days, I can hear sound when I am rebooting or starting the computer, but its gone right after.
Since the Mac its fame for their audio stability, no ones seem to know how to solve the problem, so I am kinda desperate.
I have tried the following; ran repair permissions, looked for fluff lol!....still cannot fix the glitch. Any new ideas please!!
Thanks in advance!

Since the problem existed before installing Leopard, it is clearly a hardware problem. Updating a broken system does not fix it, in fact many times it makes it worse or at least harder to diagnose.
I suggest you repost in the appropriate hardware forum - in your case the G4-17 forum(s) here:
http://discussions.apple.com/forum.jspa?forumID=1022
and the general G4-17 forum here:
http://discussions.apple.com/category.jspa?categoryID=138

Help with sound output via HDMI

My sound output via HDMI suddenly stopped worked to my TV set. I've reset the PRAM and the SMC. When I go to sound control panel for sound output, the setting is on Headphones. When I try to change it to SV420XVT1A (the tv) it immediately jumps back to headphone. I also tried a different HDMI cable to a different HDMI port on the tv. This just started after the Mac Mini had been turned off for a week. I'm using Lion and it's an 8GB Intel Core 2 Duo. Any suggestions?

I actually discovered this answer about 5 minutes after I posted the question. Thanks a lot for your help!! Funny thing is that it had worked all along with something plugged in the headphone jack but suddenly stopped working. Again, thanks!

Can not change sound output. Help Please

Well, i've been digging all the forums lately in web. my problem is, i can't change my 'system' sound output to my sound card which is Native Instruments Audio8 Dj.
Let me explain my problem decently. I do the usual procedure, system preferences > sound > n then select the output. but nothing happens. it is always set on internal speakers or headphone or whatever plugged in to the *Built-in Output*. I try switching from audio-midi setup n that doesn't work as well. The system perfectly recognizes the sound card, i can get output from sound card with applications which have their own output settings. But i cant change the system output. I have the latest version of soundflower loaded(this might be causing the problem who knows), i used many soundcards before(or maybe even ex-drivers?) n they used to work until i updated to snow leopard. I also tried trashing the files in macintosh hd > library > preferences > audio >>
and those files *did not regenerate* after restart(like 10 times), so i had to copy them from my imac.(hehe). i tried resetting pram or nvram.(didn't do any good too)And also i tried trashing soundpref.plist which didn't do me any good neither. Now i need that sound card to give me my system output. I don't need drivers of any other ex-sound cards or whatever. My drivers are up to date. And im pretty sure this ain't an hardware fail.
So, any ideas? Thx.

I am having the exact same problem. I have spoken with Apple Care and they are having my case reviewed by "Engineers," apparently. Its very frustrating as I cannot listen to iTunes or any of my video games through my really nice monitor speakers. FYI, I had this problem without installing Sound Flower, since then I have installed it in the hopes that having something different to select it might work but no changes. If I hear any good news from Apple I will be back to let you know. This seems to be a very rare problem as I have only found one other post about this issue.

The sound output does not work on my ipod

Hi There,
I have an Ipod 4 th generation and the sound output no longer works on any device. I've reset and reinstalled the software but nothing appears to work?
Any ideas please?
Serial number: 9C6463XJV9R
Thanks Chris

If none of the 5 R's helped address the issue, it's likely hardware related.
http://www.apple.com/support/ipod/five_rs/
As to what exactly is damaged/faulty, no there is no certain way to tell. It could be the iPod's audio chip or something else on the logic board.
Either way you'll need to have your iPod serviced/replaced either by Apple or a third party company.
B-rock

No sound output to TV using Apple dock - video is fine

I'm baffled. I have a new 80GB iPod Classic, a brand new Apple dock, and Apple A/V Component cable. When I watch a video or photo slideshow, everything works great. However, when I want to listen to my iPod's music through my TV's speakers, using the same setup, there is NO sound output to the TV at all. Why would the audio play when watching photos or video, but no sound when all I want is music? Please help!

I haven't personally had this problem, but I believe in order to hear music through your TV speakers, you have to use the headphone port instead of the AV cable.

Sound output channel keeps switching by itself every few seconds

Hey guys, I have this sound output issue with my Macbook pro 2010 September version that every once in a while, the audio output would keep swapping between headphone, digital output and the speakers when NO headphone or digital output or what so ever is actually plugged in. During this time i am unable to adjust sounds, and my menu bar would become very slow to respond (the sound icon and Soundsource application would stop responding during this time). After a while (could be less than 10 minutes or last to about an hour, it varies), it returns back to normal by itself.
I've read many posts on Apple forum about this issue, but i haven't found a suitable solution. Also, I read that for most, when the audio output doesn't work it would usually be a output socket issue that there is a RED light in the socket. But for me, at times it has a RED light, at times, it doesn't, and sometimes the RED light would switch on and off by itself for a couple of times, depending on how long this issue lasts until it returns to its normal state by itself.
I have tried:
1. plugging the headphone into the socket and take it out quickly
2. Downloading Soundsource: i heard that Soundsource has an option of manually adjusting the sound output channel instead of letting the computer switch automatically, but unfortunately I downloaded the latest (2.5) version of the software and it doesn't have that option on my macbook pro.
3. I also tried Cmd + Opt + P + R
The result however is that none of this worked.
Does anyone have any suggestions?

I have both and haven't experienced this at all. Very strange. I do get a lot of random channel changes however when I put my iPad on the remote, the cat walks over it or the dog sits on it.
That being said, I don't use the Samsung remote at all for the TV and never have done. I dislike it and find it unresponsive. I use a different remote to change through the available outputs and the Vision remote for Vision and for switching the TV on and off.
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

No Sound Output but Still Loaded

Hi guys, this is my first journey with Arch Linux and this introduction process has been fairly trouble-free with the exception of getting my sound system working.
Right now I'm running a Macbook Pro 6,2 (Mid 2010) with two audio devices: 1) an Intel integrated card(labeled=MID) and 2) a Nvidia HDMI card(label=NVidia). Since I'm not using any HDMI outputs, I'm trying to get the Intel card to output sound but it seems like nothing I do is working. I've combed through both the wiki pages on ALSA and the Macbook#Sound configuration section but so far, it's a no-go. According to /dev/snd, the sound modules are indeed loaded. "speaker-test" has no problem running but there's no sound output. I've tried muting and playing around with volume levels in alsamixer. Right now, I'm guessing that I might have missed something with my .asoundrc? I'm not entirely sure.
Here's all the relevant information...forgive me if I missed anything.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: CS4206 Analog [CS4206 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 1: CS4206 Digital [CS4206 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
cat /proc/asound/modules
0 snd_hda_intel
1 snd_hda_intel
/etc/mprobe.d/alsa-base.conf - setup according to the Macbook page
options snd_hda_intel model=intel-mac-auto
lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 49213 4
snd_hda_codec_cirrus 17630 1
snd_hda_codec_generic 63126 1 snd_hda_codec_cirrus
snd_hda_intel 26387 5
snd_hda_controller 26938 1 snd_hda_intel
snd_hda_codec 108536 5 snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller,snd_hda_codec_cirrus
snd_hwdep 17244 1 snd_hda_codec
snd_pcm 88487 5 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 26614 2 snd_pcm
snd 73436 16 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_hda_codec_cirrus
and my .asoundrc includes the following according the the ALSA#configuration wiki...(before and after these additions to .asoundrc didn't make a difference)
pcm.!default {
type hw
card 0
ctl.!default {
type hw
card 0
If someone could lend a hand, I'd greatly appreciate. I know that it can get working since it was working out of the box flawlessly on an Archbang install but I wanted to do things the right way, The Arch Way, this time around.

Hi
I have a similar setup with AMD/ATI devices. Try to set the order of the soundcards (Alsa#Set_the_default_sound_card): Look up your "vid" and "pid" values with "lspci -nn" and change the /etc/modprobe.d/alsa-base.conf to:
# SB [HDA ATI SB]
options snd-hda-intel index=0 model=auto vid=1002 pid=1308
# HDMI [HDA ATI HDMI]
options snd-hda-intel index=1 model=auto vid=1022 pid=780d
...or something like that. After that my soundcard worked but the sound quality was poor (no bass).
Hope this helps.
Last edited by iceflower (2015-01-04 12:46:41)

2 Apple TV's and no sound output when using AirPlay/mirroring?

Hi,
Bought my first apple tv and when air mirroring was able to go to my system preferences and choose sound output for it and it worked beautifully when I wanted to play a movie on my computer and send it to the TV. Bought a second apple tv for the bedroom, both are connected over wifi. Using Mountain Lion on my iMac. Now it won't play any sound on either and will not let me choose which apple tv in system preferences - sound. Any help would be appreciated
Sue
I have tried turning Apple TV on first, then choosing sound output before turning on air mirroring. Problem is it won't let me choose, stays on internal speakers.
This fix won't work for me.

Might I recommend the following sample code instead?
[http://www.jsresources.org/examples/MidiNote.html]

No sound output from dock connector or headphones but speaker is fine

I've got a 3GS which I've had since October.
Recently, there has been no sound output from the headphone socket - or rather, what does come out is very strange, sounding almost electronically distorted.
I thought that maybe the headphone jack was broken, but now I've found out that the same thing can be heard through a dock when the iPod is connected this way.
I'm fairly sure the dock connector is still fine as the phone charges and can be controlled by the dock etc
Most of the discussions I've found relate to sound not coming from the speaker on the phone, but this is absolutely fine.
Any ideas?

Hi, and welcome to Apple Discussions.
Have you tried resetting the PMU?
I'm not optimistic that this will help any more than the procedures you've already tried, but it won't hurt to try.
Do you still have your OS 9 installation? If so, try booting into OS 9 and see if the problems with the audio are happening there, too. If so, you can bet it's a hardware problem.
How big is your hard drive and how much space remains available on it? If you don't have your OS 9 installation in order to check out whether it's a hardware problem and you have enough available hard drive space, you may want to try an Archive and Install of the OS in order to make sure it isn't an OS X system-wide problem. If that doesn't do it, you could back up your hard drive and restore your software.
All of this may just be spinning your wheels, but it's all stuff you can try before shelling out a lot of money for repairs.

Sound output choices don't always stay fixed

On my mac pro, when I select headphones as my output for sound in my preferences, some things do not respect this and instead play sound through my external speakers, most noticeably in flash player videos. In fact, playing some videos in a flash player (through a browser), will actually make the computer's general sounds start coming from the speakers as well, even though my preference is still set to output:headphones.
Anyone else hit this bug, and did you find a workaround?

I find that changing the sound output device needs to be done twice, almost every time.
For example, when changing from Internal Speakers to Line Out, I either need to click Digital Out then Line Out, or click Line Out then Internal Speakers then Line Out again.
So, as long as I change the output device twice it works. If I only switch from the current output device to the one I'd like to switch to, it doesn't work.
While this is all very annoying, I have found a few things that make the process a bit easier:
Instead of clicking System Preferences > Sound > Output to get to the output device selection screen, you can hold down Option (⌥) and then press any of the Sound keys (Mute, Volume Up or Volume Down).
Another option is SoundSource by Rogue Amoeba which lets you switch all sound devices with a single click on the menu bar.
I hope that helps.

Sound output device

Hello,
Recently I have been experiencing problems with my sound in my iMac with OS X 10.6.2
In my sound output device list, I have the following:
- Headphones (Should be selected)
- Soundflower (2ch)
- Soundflower (12ch)
To hear sound from my iMac speaker or headphone, the Headphone option should be selected. However, everytime I reboot the OS, it go to the soundflower and I have to manually go to system preferences and select the Headphones. I don't even know what the Soundflower is and why it is there. How do I make the "Headphones" as the default selection?
This has been an issue for the past month or so.

Soundflower is an audio routing program that emulates an output. It comes in very handy for people like me who use studio monitors through an audio interface as Apple doesn't allow you to adjust the volume on such setups with a keyboard (no idea why, since it works PERFECTLY under Windows 7 on Bootcamp, but I digress). I'm not sure how you installed it by accident, but you can delete it if you don't need it.
To fix your issue you need to delete the audio preferences file (I forget where it is, hopefully someone can help me out), then select the headphone output again and it should remember your setting.

Sound Output Through miniHDMI port

I am trying to link my 13 inch MacBook Pro to my tv so I can watch videos I have on my computer on my TV. I have the mini HDMI cable converter hooked up. I am getting video from the computer to the TV but no sound. I tried a headphone to RCA converter to get sound to the TV and this works if I have the TV source set to AV. However this only sends sound to the TV and not video. And the way the TV source works I cannot select HDMI video input and av sound input. Is there a way I can force sound output through the miniHDMI cable so I can get sound and video through one cable? I would greatly appreciate any information and help anyone can provide.

See,
iMac (Late 2009), MacBook Pro (Mid 2010), MacBook (13-inch, Mid 2010)- HDMI audio doesn't work with some adapters
Mac computers- About HDMI adapters
Mac mini (Mid 2010)- Frequently asked questions about HDMI

Sound output stuck on Airplay on OLD Macbook Pro

This should not even be possible, since AirPlay is not even available on my late-2008 Macbook Pro...but my system preferences show that sound is being routed to my AppleTV via AirPlay!!
I have zero sound coming from my Macbook. None with speakers attached, and none with nothing attached at all. I go into System Preferences>Sound>Output, and AppleTV is somehow, impossibly, selected. I can not unselect it.
I have rebooted my laptop, and rebooted AppleTV, and nothing works.
Help!

Have you tried SMC or PRAM reset?
SMC RESET
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

No sound output help

Similar Messages

Maybe you are looking for