No sound sb audigy 2 in windows 7

I updated to windows 7 from XP, the sound volume became very low. After resetting sound options to default , there is no sound at all. Any help would be appreciated
thanks

Yeah I had to ditch my Audigy 2 as I couldn't get it working. Might just be an old card, but half the time it didn't work at all in Windows 7. Anyway I guess you could try and download some drivers.
http://support.creative.com/Products...ame=Audigy%202

Similar Messages

Creative Sound Blaster Audigy SE = dimensi

Hello,?Can any tell me the height of?a Sound Blaster Audigy SE card?I am building a HTPC and the case has a limmited height so I need to make sure the card fits the case. I've searched the creative site (also product manual) and internet but I haven't found an answer.
Thx in advance,MeanMachine

I have a Sound Blaster Audigy SE on Windows Vista Home Premium 32-bit operating system. So far this Gateway GT5404 duo core pc is having better audio capabilities with high end games like world of warcraft, with some noticable sound issues (Sigmatel audio). I bought this card to better the audio performance of World of Warcraft and get rid of these issues. I'm not sure if this card is any better than the on-board intergrated sound card on this gateway. Is this just a driver issue with the Audigy SE card? or is my on-board better? After putting it in world of warcraft's sound on the logon screen and throughout the game sound "stretched" from lag from the video card's high end performance (NVidia GeForce 7600 w/latest drivers). Any help or info would really do me good right now. Thanks,?PurePower

Creative Sound Blaster Audigy SE, 7.1 surround?

What are the latest drivers for Creative Sound Blaster Audigy SE, 7.1 surround? I have have tried a lot of drivers and they don t seem to work...

I have a Sound Blaster Audigy SE on Windows Vista Home Premium 32-bit operating system. So far this Gateway GT5404 duo core pc is having better audio capabilities with high end games like world of warcraft, with some noticable sound issues (Sigmatel audio). I bought this card to better the audio performance of World of Warcraft and get rid of these issues. I'm not sure if this card is any better than the on-board intergrated sound card on this gateway. Is this just a driver issue with the Audigy SE card? or is my on-board better? After putting it in world of warcraft's sound on the logon screen and throughout the game sound "stretched" from lag from the video card's high end performance (NVidia GeForce 7600 w/latest drivers). Any help or info would really do me good right now. Thanks,?PurePower

Creative Audigy 2 and Windows Vista: Sound volume turns down when I try to turn it

I have a strange problem with my audio in Vista. I have a Creative Audigy 2 and Creative 6700 speakers. My full system specification is below but please note I did not have this issue in my previous Vista build - its only happening since I did a reinstall. Anyway, when I swich on the speakers using the remote control unit for the 6700 speakers the sound comes on but then it turns down. I have to then increase the volume by a large amount for it to start playing sound again and then turn it down to listening volume. This issue is not application specific - it happens in everything: Winamp, WMP, games, etc etc?I'm using [color="#000000"]Creative Sound Blaster Audigy series Vista Driver 2.2.0002 and I've tried reinstall several times. I've tried doing diagnostic startup etc using msconfig in case something was conflicting and its still happening.
Has anyone got any ideas whats going on?Many thanks for your help!?System specifications:?MSI K8N SLI (MS-785 v..0) nForce4 Rev. A3
BIOS Phoenix Technologies 6.00PG
AMD FX-60 with Thermalright Ultra-20 Heatsink &?Scythe?20mm fan
Bus speed: 20MHz, Multiplier: x.0, Core Speed: 22 MHz
Corsair 2Gb: 2x Gb PC3200 RAM 28 bit dual channel mode & T command rate (2.5-3-3-8) with Thermaltake heatsinks
XFX 8800 GTS 640Mb XXX Edition
Hauppauge Nova T-500 dual tuner digital TV card
Seagate Barracuda 7200.9 500Gb
Optiarc AD-770S SATA DVD Writer
Xclio X2S4P4 750WModular SLi U-Quiet PSU
Lian Li PC-A0A aluminum case
Dell E228WFP (Two in dual display)
Microsoft Wireless Laser Mouse 8000
Microsoft Digital Media Pro keyboard
Windows Vista Ultimate 32bit Edition?Message Edited by DistortedVision on 05-25-200706:4 PM

Have you checked the volume button? It might be physically stuck. To determine whether a hardware repair is needed, you need to follow these steps:
1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
After that: test the device to see whether the issue is solved.
2. If the issue is not solved, you should backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup.
If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
Stijn

Windows XP Sound Blaster Audigy FX Support

How do I get my Sound Blaster Audigy FX to work with Windows XP. First it doesn't find the device. Then the cd that came with it says it needs Windows Vista to work. Please Help!

joyalton wrote:
I have a new Emachine T3508 512MB with Windows XP (I plan to add a second 512MB). I also plan to purchase/upgrade with the Sound Blaster Audigy SE sound card. Is the Creative Inspire T3030 2.1 Speaker System compatible with my T3508 & the Sound Blaster? I think it should be but I wanted to hear it from someone who knows more than I do. Thanks guys.
To be honest, this is a pointless post. You're going to have to check your machine to see if there's an additional PCI slot that can take on the audigy SE. If so, then you already know your inspire t3030 can be used. Even the onboard sound with your motherboard should be able to take it on (assuming your emachines PC has onboard sound). I hate buying emachines, HP, and Compaq PCs they lack expandability.

Choppy sound in Windows 7 on Sound Blaster Audigy SE

Hey all,
I recently upgraded to Windows 7 and I love it with the exception of my sound card. Ever since I upgraded, all my sounds are super choppy (like every 5 seconds it chops). Of course I installed the new creative windows 7 drivers but it didn't fix the problem. Anyone have any ideas as to what could be causing this or other possible solutions to try?
Thanks,
Jason

Re: Choppy sound in Windows 7 on Sound Blaster Audigy SEk What I meant was when you uninstall your graphics driver and use standart VGA drivers then the sound turns to normal without any crackling/popping. But of course you wouldnt want to do that or else you wouldnt have graphics accerelation. (You can't play video games and even watch any kind of video)
For instance you freshly setup windows, dont install any nvidia/ati drivers, just with the big screen, install the creative drivers u wont have any problem with your sound.
That's why I said that there's a kind of confliction between graphics interface and creative drivers. Because when u install any kind of display driver, crackling sound starts again.
There's no solution for this except updated SB drivers. And that's why people get mad to creative on this forum. (Not only on this forum of course, it's a worldwide madness)

Sound Blaster Audigy 2: No sound in DVD or Windows Media Pla

Getting around in Windows XP I get all the sounds in the book, whether it's starting up or shutting down, critical "bongs", icon confirmation "clicking", all the sounds are there. Where I do not get sound is While attempting to watch a DVD or when I try to play any music file in Windows Media Player. The DVD video will play, there's just no sound, and with Media Player I get this error message:? "Windows Media Player cannot play the file because there is a problem with your sound device."? Again, all the other Windows sounds are there. Anybody have any experience with this one?

I have just installed my Sound Blaster card, and get all of the Windows sounds. I can even play music CDs and movie DVDs on different media players other than Windows Media Player. The sound is also fine when playing games. However, when I try to use Windows Media Player, the CD and DVD plays, but there is no sound. In fact, when Windows Media Player is up and running, there is no Windows sounds or even other sounds when playing games. As soon as I close Windows Media Player, there is sound. I analyzed the configuration settings for both the Sound Blaster card and Windows Media Player, but I cannot see any problems.
Does anyone have a clue?

How to install The Soundblaster Audigy SE in Windows 7 RC?

:How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
But how to install in Windows 7 RC ?
I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
What to do ? A computer without sound is nothing...
Thanks,
Arie

>Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Vista drivers problems Sound Blaster Audigy 2 ZS Noteb

First thing to do: haveyour systemchecked out, if windows says the hardware is failing there may really be something wrong with it.
If the SB card works in an XP machine there may be a problem in the the PCI slot or controller on the motherboard, either way have a tech shop look at it. If thehardware allchecks out: before putting the card back in completely delete the old driver and software, download the new one without installing it, then put the card in and windows should try to auto-install with the new driver.P.S. the platinum version is the one with thecontrol panel that slots into a dri've bay, if you have one of those, it's a platinum, if not, it's a regulHi all, how are you
I have a Sony VAIO VGN-SZ430N/B notebook, and I'm trying to install Sound Blaster Audigy 2 ZS Notebook on it (Unfortunately, the notebook came with windows vista business from factory).
This notebook has a Texas Instruments PCMCIA controller.
Under "Device Manager" the PCMCIA controller is described as "Texas
Instruments PCI-8x2/7x2/6x2 CardBus Controller", but on Sony's
webpage the driver that seems to be related to it is "Texas
Instruments PCI74 Integrated FlashMedia Controller Driver".
It is kind of all in one solution from Texas Instruments (PCMCIA
controller, Memory Card reader, and Firewire controller).
Please, may someone help me to answer the questions bellow
1)Are there any kind of compatibility problem between this notebook PCMCIA controller (described above), and Sound Blaster Audigy 2 ZS Notebook
2)I've already brought this notebook to Sony's support service, so they could verify if there is any kind of hardware problem with the notebook. Sony's technician wasn't able to find any hardware problems on it, but I'm experiencing the problem described below:
2.)Every time that I plug this sound card on my notebook, and I try to install Creative's latest windows Vista drivers(Creative Sound Blaster Audigy series Vista Driver 2.2.0002), thus It leads me to a Blue Screen during the driver installation process. Please, Does somebody know what could be this problem root causeIt is very weird, even if i try to install this sound card on clean windows vista install, then it leads me to blue screen. Besides, I have another PCMCIA card from another manufacturer, and I was able to install its windows vista drivers with no problem.(It sounds that Creative labs' vista drivers is the problem root cause as I've tested this sound card on a different notebook with windows xp and It worked fine).
3)Does anyone know if creative is planning to release a windows vista driver that allows the users to use all of this sound card featuresSo far the latest driver available doesn't support even DVD-Audio. Have creative labs discontinued this product
I appreciate any help you can give me,
thanks in advance,
Rogerr ZS.

The best advice I can give is to fully remove ALL Creative software.We've compiled a list of entries that will cause problems here. It's very important before installing newer files.http://nomoregoatsoup.wordpress.com/...tall-problems/Then install some better drivers and see if that cures your issues. The 2.2.0002 drivers are really, really awful, 99% of people I've spoken to had problems with them. I personally like 2.5.0002 Hope this helps.

SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

(ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
CONTINUE ON-
Download RAR file with ISO inside and install if you don't have the installation CD
installation cd with EQ download: http://files.filefront.com//;689430;;/
If you do or after you finish downloading goto step A.
A) Take your Creative Driver/Install CD, copy it to your hard dri've.
B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
C) Set it for Windows XP SP2.
D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
E) Restart when told to
F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
Message Edited by jeepbme on 03-08-200708:50 PM

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Audigy Platinum Ex Windows 7 SPDIF IN not working

Audigy Platinum Ex Windows 7 SPDIF IN not working? I have an old Audigy Platinum Ex that has served me well, until now when I have a new Windows 7 x64 PC (RTM). SPDIF IN no longer works, though everything else does (including SPDIF OUT). I've tried the current and beta drivers for the card, and no difference.
In Windows Vista x64 I could use ASIO drivers with my M-Audio ProFire 60 while using the Audigy for PC audio. Most often this was for skype, which I would set to use SPDIF IN/OUT which I then connected to the ProFires SPDIF OUT/IN. Using the ProFire mixing tool, I could control which mics and levels went to the Audigy while not interfereing with the ASIO drivers recording the mics. The ProFire also recorded the SPDIF OUT from the Audigy to caputre the person on Skype to their own audio track. This is a podcast producer's heaven, and I miss it!
If it's a known issue (SPDIF IN / Win 7), I've had this card through 4 PC upgrades and it's served me well enough I don't mind buying new. The Creative Sound Blaster X-fi Elite Pro looks to be the current version of my Ex - are there any Windows 7 issues currently that would stop me from using it in the role above? I will miss the FireWire port, a shame they dropped that.

Well basically it is possible, and I've found this out. Apparently Dell released a driver or something that allows it to work, but then only if you install a 3rd party modified xp version of the creative suite. I don't remember where I found it, but it was through google... Using some term including x-fi, dts, and vista.... Can't seem to find it now. Anyway, it had a download for the whole creative suite that was modified from the xp version for Vista, however it was buggy as hell, caused driver issues and blue screens, and ended up causing me to have to reinstall Vista altogether again. In other words, it's possible, but I don't recommend it until it's officially supported... Don't know when this will be yet... *crosses fingers*
Luckily I've got a dual OS system with XP too, and I switch to that when I want to use my Xbox 360... However due to Microsoft also being terrible in that department... I now get entertainment off of its 3 red lights... (For those of you who don't know, 3 red lights = hardware error. Sending into microsoft for repair typically is a 2 month process... I'm still waiting on my prepaid shipping box to arri've and it's been 4 days... Will be a similar wait to get it to them, 4-6 weeks for them to actually repair, and another week or so to get it all shipped back). Although even when the console worked, my dsl modem sometimes cut out when playing on Xbox li've and dropped signals, reported errors, etc.
What is with the companies producing technology nowadays? I just want to play Gears in 5. on Xbox li've... *cries*Message Edited by Supercoolyo on 07-22-20070:54 AM

Can not detect Sound Blaster Audigy 2 on this sys

Im having trouble install drivers (apart from the old CD ones and some out of date ones) all the latest drivers or beta drivers say they cannot detect my card. I have an Sound Blaster Audigy 2 OEM which i bought nearly 2 years ago. I've tried swapping it to a different pci slot but makes no different Constant crashes when playing openal games. Even if i install the lates openal file. But i need to find out why i can't install the newest drivers and why they say i haven't got an audigy 2 when i have. In my device manger even says that its an "Creative SB Audigy 2 (WDM)" My system is as follows...
Windows XP Proffesional SP2 32Bit
P4 3.0ghz
.25Gb DDR 400 Ram
Geforce 6800 Ultra 256Mb
Asustek P4P800-E Deluxe Motherboard
Creative Sound Blaster Audigy 2 OEM
PCTV Rave TV card
Please some one help me, it will be greatly appreciated. If you need anymore info please let me know ( i may uninstall and remove the tv card just to get it off my list of perhaps the audio part of the tv card could be interfering ?)Message Edited by Alexia on -2-2005 :52 PM

I am getting the exact same problem. Just downloaded the "Creative Sound Blaster Audigy unified series Beta driver with OpenAL support 2.08.0002" for my soundcard which is an Audigy 2 OEM (Model No. SB0240).
I am using WIndows Media Center Edition 2005, but when I try to install the beta drivers, I get the following error message:
"Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this setup program
Setup will exit."
My Device Manager shows Creative SB Audigy 2 (WDM) with driver version as follows:
Driver Provider: Creative
Driver Date: 23/06/2004
Driver Version: 5.2..444
I am currently hearing sound fine (so the soundcard is installed correctly), but the sound keeps cutting out from games that use OpenAL.
Anyone else getting this problem? How did you fix it's

Bug in Sound Blaster Audigy 2

Hi,
I'm experiencing something that is annoying. I noticed it long ago and it continues happening even with all the updates installed:
Windows XP SP2
DirectX 9.0c
Drivers:
Control Panel, Creative SB Audigy 2 NX, shows 2004/04/9 for the windows driver.
Firmware: ..0509
I installed the latest drivers found HERE (http://es.europe.creative.com/support/downloads/download.asp)
called "Creative USB Sound Blaster Audigy 2 NX update .00.000" (4 Feb 2005)
EAX Console version: 2.07.0
What is the problem?
Well... I have 5. soundsystem, and I choose "Surround Stereo" in the CMSS 3D option.
Each time I shut down the sound card PRESSING THE BUTTON or either turn of the system, I have to re-click this option button.
This is, the system saves the settings correctly, and if I open the EAX Advanced HD again, I find it selected, but when I re-click it again, then the sound gets surround.
Hope it gets fixed, as its a very annyoing thing.
Thanks in advance,
PS: If this is not the place to put this, please tell me insted of simply ignoring it.

There IS a problem with this. I have experienced it in two different configurations, and yes, I have everything updated. As you can see I STILL have the problem... (I don't remember when I posted the first post). I also contacted Creative Support, and although it being fast, they did not test it. I simply got answers once and again about unsinstalling the drivers and some other things on my computer and install again.
I don't know how to report this to a developer or someone who can take some minutes to test it and say "hey yes... it's true!".
The problem with this is that you DON'T notice it at all.. you hear 5., all seems OK, untill you re-click again the "surround stereo" option.. it's in that moment when you notice that the volume and the quality increases... I guess people is using their 5. like in surround but not at 00% quality.
Sad, but it's the way it is I guess...
Now this is my day by day... Plug the NX, open EAX, select surround... and if I previously used my headphones (on the speakers) I have ALSO to switch from 2 speakers to 5. and then EAX and surround (although it's always clicked...)
I'm not asking for help, or suggestions. I just want someone who cares at Creative to know about this... Well of course, if someone has a suggestion or can help in a way that can make me forget about opening EAX console... it's welcome.
Thanks again for reading or for any help.
Regards.
PS: I'm thinking on replying to creative again, but I guess I will get the same answer...

Sound Blaster Audigy, DR release 2.8.4 failed just like that

Hi, I have a big problem, last Saturday someone has used my computer he did nothing all too strange he only downloaded some files and had an audioconversation on his MSN-account. But to my astonishment the sound disappeared. I have tried everything in my ability on my knowledge of computers and this site. I have checked every configuration and all. I have re-installed and updated everything but nothing works, does anybody have an idea what I can do?
Sound Blaster Audigy, DR release 2.8.4Date: Agust 8th 2005
Program version: 5.2.8.64
Application instance id: PCI\VEN_02&DEV_0004&SUBSYS_005A02&REV_03\3&6AAA0&0 &60
Windows XP Professional 2002 version service pack 2
Need more info? let me know!

go online to http://support.creative.com/Products...Audigy+2+Value?go to the bottom of page and click auto update and up date all your drivers.
Or go to your start menu click on settings, click open control panel, your system file click it open, click open Device manager, in device manager scrool down till you find sound,video game controllers double click that open, go down till you find the name of your sound card right click on that, click on properties a window will open up with a bunch of tabs at the top find the driver tab click it open find where it says update driver click that and let it do its thing? after done restart your computer good luck!

No sound sb audigy 2 in windows 7

Similar Messages

Maybe you are looking for