No sound signal into the film

Hello, everyone I am using iMac i52.8 RAM 12g,
I recently editing canon 5d movie, found that more than 2 minutes movie clip audio signal loss will occur, but the original film with Quick Time Preview is normal, the film into Premiere Pro CS5.5.2 edit sound signal loss occurs, Sequence is However, in line with the film's preview of intermittent or no audio signals occur? ? This problem is recent

Double post.

Similar Messages

  • Export - No audio after 1 minute into the film

    Hi,
    a few days ago I started working on a project in Final Cut Pro X (Trial).
    The project is about 3 minutes long and contains audio throughout, which is perfectly audible within Final Cut Pro.
    The problem comes with the export. After 1:10 minutes into the film, the complete audio fades out (1 sec. fade) and does not come back.
    I have tried 5 different export settings already and it does not make any difference.
    I have searched the whole timeline for a clue, but it looks absolutly normal. And as stated above, the music is audible throght the film in the preview.
    I even tried to export a completly new project with another audio file. There was no problem there.
    It seems to be a problem within my project. But I simply can not figure out whats wrong.
    Some quick help would be greatly appreciated, as I am kind of in a hurry to export this movie...
    Has anybody already had the same problem?

    Well, I may have been a bit harsh with my statement. But on the other hand - This program is not completely new. It's actually one year old and has had something like 5 updates.
    And there are many features that are definatly not professional. The whole timeline and the way it behaves is just totally irritating. And it's not like, I am the only one who is complaining. And to be called a professional programm, there are just too many uncountable features that are missing.
    I mean, this was a really small and short project. But instead of being faster or as fast as in any other program, I was slower and was constantly trying to figure things out, that should have been super easy to find and understand. If I already encountered speed problems (on a very powerful Mac Pro by the way) , numerous bugs and export problems in a project this small, I don't wanna work on anything bigger with this "Pro" application.
    @Tom Wolsky
    I can post a screenshot as soon as I am back at our workplace. Probably tommorow.

  • I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac.

    I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!

    I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!

  • My laptop is having trouble downloading and playing rentals from the iTunes store, I get a little way into the film and it stops playing and will not download any further. This has happened on two separate occasions, my laptop is under a year old?

    I get a little way into the film (just 4 minutes this time!) and it stops playing or downloading. The remaining download time changes continually and will say anything from 6 minutes to 11 hours! My laptop shouldn't be the problem as it is under a year old and I haven't experierienced any other running problems with it... I hope I will not be charged for the film !!

    I'd report the problem to the iTunes Store. 
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • Reading a differential signal into the Kintex 7 KC705

    I am attempting to read a differential signal into the FPGA: i_SCLK_P and i_SCLK_N. I want to trigger my ILA on a rising edge of i_SCLK. I am unable to contrain my pins correctly. I am getting the following error:
    [Place 30-64] Illegal IOStandard configured for port 'i_SCLK_N'. I/O port 'i_SCLK_N' is differential, but has single-ended IOStandard value LVCMOS25.
    I have then attempted to change my IOStandard to LVDS (which I have attached) but I then get the following error:
    [Drc 23-20] Rule violation (BIVB-1) Bank IO standard Support - Bank 16 has incompatible IO(s) because: The LVDS I/O standard is not supported. Move the following ports or change their properties: i_SCLK_P
    I have tried to change to a different bank twice now. I was hoping that I could find a bank with LVDS capability. I have looked through the KC705 datasheet and it appears that the pins that I am using should be valid.
    Where am I going astray? Thanks for the help!

    Hello ,
    Which Vivado version are you using? Can you try in Vivado 2015.2
    Does your design contains MIG core?
    Also check if the following thread is helpful:
    http://forums.xilinx.com/t5/7-Series-FPGAs/K7-problem-of-HR-BANK-LVDS-signals-selected/m-p/523965
    --Syed
    Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
    Give Kudos to a post which you think is helpful and reply oriented.
     

  • Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

    Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

    Roamingnome, thanks for your response. Although I have been a Bell (Canada) customer for my WiFi signal for years, the 5c and its necessary mobility plan, is very recent. Some years ago, Bell supplied its own ‘router’ for my computer, and claimed that it was possible to get their WiFi signal only with the router they supplied. When I recently received the 5c, I wondered if the plan it requires, which is within the much wider, overall Bell zone, could be used somehow to get my Air online - some sort of tethering? - that allows me to give up the Air WiFi service and router all together, but still get the Air connected. Here in Canada, Bell Mobility and other Bell services are very separate. Any suggestions appreciated.

  • On-board sound card failing. Will BIOS let me add a sound card into the PCIE slot?

    On-board sound card failing, consistently locking everything, (yes, I updated all drivers, codecs) so want to put in new sound card. Will the BIOS let me add a sound card into the PCIE slot? (of course after disabling the ReakTek onboard sound) I don't see an option to choose PCI or PCI-E in the setup screen (F10 at boot) for audio.
    Pavilion desktop a6200t, Windows7 SP1
    System board is Lancaster8 1.04, BIOS 5.18
    This question was solved.
    View Solution.

    Hi there! yes it will let you install a seperate sound card as long as you have a vacant slot
                                                                                                                              spacechild

  • Can I plug a TTL signal into the mic on my sound card?

    Basically I want to trigger some LV code using an incoming 0-5 volt TTL signal.
    And I was wondering if I could plug that TTL signal into my mic input and read the signal with the LabVIEW sound VIs.
    But I'm unsure if I'll just end up frying my sound card.
    I know I could buy a cheap NI USB DAQ board for $99 ... but I just want to get this done asap, and thought the sound card idea might work.
    Any ideas?

    A sound card is AC coupled. And has limited  bandwidth. So I will say this is a far from optimal solution. What are you trying to do?
    Sound cards are most often made for line-in signals levels. That is +/-1 volt. But this may vary from vendor to vendor.
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • Sounds overlap into the aggregator !

    Hi everybody,
    I have 5 modules all beginning with sound. When I insert the modules into the aggregator, the sounds overlap on the first one during 4-5 seconds! What to do ?
    Thank's in advance,
    Michelle

    I'm sorry it took so long to reply, Michelle, but I don't think I would've been able to help much anyway. I hope you've already resolved the issues you were having. Frankly, I'm not very happy with the Aggregator, and have abandoned it for the time being.  In the one course I did publish using the Aggregator, however, I don't recall seeing the last issue you described.  The topics in the TOC should take you to the specific slides they're linked to, regardless of where they are in your SWFs.
    As for testing on a Web server, that's always a good idea. Performance on your local machine or network can get pretty dicey, and you may find that at least some of your issues disappear when your modules are deployed on the Web.  At the very least, you should publish the HTML files and test in a browser (as opposed to the standalone Flash Player or the Captivate preview window).
    The only other recommendation I would make is to test all of your individual SWFs thoroughly before publishing your Aggregator project. If you know your movies are functioning as expected, then at least you can narrow it down to the Aggregator being the culprit.

  • I need to import a word doc into the film script format

    I have a script saved in a word doc and i want edit it on adobe story. Ho would i do that?

    Hi,
    in Story Projects view, you can click the 'Import' button and choose the word document and then choose Film/TV template as appropriate to import. If your word document has been properly formatted (e..g, Scene Heading is of the format INT. SET NAME etc.), Adobe Story would be able to parse the elements correctly and import them without issues.
    Thanks
    Aurobinda

  • How to insert signals into multiple columns in db, dbtoolset

    I have  a labVIEW program that is currenly simulating voltage and a current signal using the DAQ Assistant. I'm using the database connectivity toolset. I am currently able to insert one signal into the database converted to a float(I can insert both into the same column as bianary but it needs to be stored as a usable format and in seperate columns.)
    The problem I am having is at the DB Tools Insert Data block. I have the connection, dbTable, error code, and create table boolean being passed into it. Where I am a little lost is how to set the columns I want to store the multiple signals into.
    If someone could break that part down for me that would be great. In short, I want to store voltage(channel0) and current(channel1) from the DAQ Assistant into their own respective columns in the db.

    As I have often pointed out, the easiest solution to this situation is to dump the Database Connectivity Toolkit. Check out this thread and follow the references in it. If the DCT weren't in the way what you are wanting to do would be very easy.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Why is it that when I saved the waveform of my acquired signal into a wav file, the output waveform of my saved file turn out to be different from my input signal?

    Hi all,
    I am currently doing a heart sound analyzer project. I acquired signal using NI USB 6008 continuosly. My program is able to saved the acquired signal into a wave file. But when I browse open the saved file, the output waveform did not look the same as the acquired input signal and also the sound of the heartbeat captured cannot be heard from the loud speaker though I have saved the file as a wav file. I am not sure if the method i use to save the acquired data as a wav file is correct.  I have attach the print screen of the differences of the output I have notice and the program I have created. I would be glad if anyone here is able to troubleshoot my program.
    Thanks. 
    Attachments:
    heart sound analyzer.zip ‏257 KB

    Hi Brett Burger,
    Thanks for your reply. For your information, I have set the sampling rate as 10000 as for the sound format, I have set the bits per sample as 16 bit, the rate as 11025 and the sound quality as mono. I tried using your method by changing the sampling rate as 8K but still my program encounter the same problem.
    I wish to also create a button that is able to generate a preformatted report that contains VI documentation, data the VI returns, and report properties, such as the author, company, and number of pages only when I click on the button.  I have created this in my program, but I am not sure why is it not working. Can you help troubleshoot my program. Or do you have any samples to provide me. Hope to hear from you soon.
    Many thanks.
    Regards,
    min
    Attachments:
    Heart Sounds1.vi ‏971 KB

  • How do I get sound into the computer from my webcam?

    Hello,
    I have a mac pro intel 8-core and need to use webcam with skype. The thing is, there is no build in mic on the 8-core and there is no mini audio input jack so how do I get the sound in from a webcam?
    In fact, are there webcams available that have the built-in mic sending the signal through USB or firewire? The only webcams I found had a mic with a mini-audio plug for plugging into the computer. But of course, there is no jack to plug it into.
    Besides using a firewire camcorder, is there anyway to get sound in from a webcam?
    Thanks so much,
    Kirk

    Hi
    I'm using Skype with a Logitech Pro 9000 camera with built in Mic.
    I didn't need special drivers, it worked as soon as it was connected. It was configured in -
    System Preferences - Sound - Input - then select Logitech Camera, USB and you are done.
    Regards, Ian Macdonald

  • I have just put a screen protector on my iphone 4 and where there was something on the film it seems to have eaten into the screen. is there a way to clean these marks off

    Help,
    i have just put a screen protector on my iphone 4 and where there was something on the film it seems to have eaten into the screen. is there a way to clean these marks off?

    I wouldn't worry.  Assuming you haven't hacked the phone you cannot have installed any viruses or spyware just by clicking a link in an email.  Sounds like the page you accessed could not be read on the phone anyway, or it was just a dead link.

  • My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Maybe you are looking for