No sound since installing 7.0
My media players stopped playing sound after I installed Itunes 7.0. I checked the hardware and that device seems to be working. I did all of the troubleshooting steps for Itunes, DirectX, and Windows volume settings. I can't find the problem! Why isn't there sound? A problem with DirectX maybe or is itunes 7.0 just buggy? Any help would be greatly appreciated.
Did you goto control panel>Quicktime>Audio Tab check "Safemode" hit OK and then reboot?
Similar Messages
-
Pi hve no sounds since installing ios8
Snice installing IOS 8 on my iPad ihave no sounds
Hi again keithfromdunstable,
According to the new information you are giving me in your response, it seems like you could be experiencing the symptoms of a software issue. I would like to recommend that you restore your phone as new and see if the issues persist after this troubleshooting step:
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/ht4137
I would also like to point out a step you may have missed in article that I sent to you previously. If you continue having issues with this device, you should follow that step for further help:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
If the issue is not resolved, please contact Apple Support.
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
HT4623 since installing update my volume & sound are not working correctly
since installing the update 7.0.6 this morning, my volume and sound are not working in music, videos, keypad, and apps
You can't update to iOS 6 on the original iPad, but you might be able to troubleshoot the apps on your iPad. What is not working correctly?
-
Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?
After you install Apple driver to enable the audio chip, YOU then need to manually download and install (Cirrus or Realtek audio depending on the Mac).
Cirrus realitypod mac audio driver
MacBook Pro '10 Cirrus Logic CS4206A (AB 11)
Realtek Drivers -
Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?
Eddie,
There is a forum specifically for Boot Camp & MS Windows users. Because that is where the Boot Camp guru's hang out I'd recommend re-posting there. -
Sound distorted when I listen to headphones since installing latest update
Ever since installing the update on my iPhone 5s, the audio is distorted whenever I try to use headphones. The sound is fine until I plug my headphones in, at which point it sounds muffled as if I am listening to the music through the walls. I have not damaged my phone recently and also tried this with two different pairs of headphones. Both headphones work fine when I plug them into other items; it only gets distorted when I plug in headphones. Please help!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
The sound on my Mac Pro doesn't seem to be working since installing OS X Yosemite - help!
The sound on my Mac Pro doesn't seem to be working since installing OS X Yosemite - help!
I had a smilier issue... If you're using external speakers (as opposed to the ones on the display), you may need to re-select them in System Preferences. Some preference choices seem to reset with the Yosemite install.
-
Since installing Yosemite, I have no sound.
Since Installing Yosemite, I have No sound. There is no sound if I use headphones either.
There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by the warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store. -
No sound from system since installing latest iTunes
Since installing the latest iTunes off the internet, not only do I hear no music, but I have no system sounds from the computer or any other programs.
I ran through all the checks to make sure my card and drivers were configured properly and everything checks out.
I have uninstalled iTunes and reloaded it from the disk i got with my Nano, still nothing.
I ran a malware scan with Ewido, still nothing.
I am using Windows XP with SP2 installed.
I would appreciate any help.
StacyI have similar problem. Installed iTunes. copied CD songs into my music library successfully, but cannot hear them. After reading this post, I checked and realiZed I cannot hear any sound from my computer. My hard drive is new; maybe I need to change some settings? Can anyone help, please?
-
No Sound on Computer since installing Itunes
Since installing Itunes 2 days, I now have no sound out of my computer speakers. Could one of the settings be at fault. I have checked all the cables, and sound volume etc. and everything seems to be O.K.
Hoping someone can fix this problem.
GayleI have similar problem. Installed iTunes. copied CD songs into my music library successfully, but cannot hear them. After reading this post, I checked and realiZed I cannot hear any sound from my computer. My hard drive is new; maybe I need to change some settings? Can anyone help, please?
-
Since installing the most recent update I have lost all sound from the speakers. Cannot adjust volume it stays muted. HOw do I resolve it?
Hello there, ospreytom.
The following Knowledge Base article offers up some great steps for troubleshooting issues with audio on your Mac:
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I play music on my hi fi via an airport express attached to my iMac.
Since installing maverick the sound quality is terrible and I get frequent distortion, which never happened before.
I have reset the airport express and reconfigure my wireless settings. I have also used Ethernet on its own but still get the same sound problems.
I would love to turn itunes sound off as you used to be able to do, but this I believe can't be done.
Has anyone else been having the same types of problem, and better still has anyone got the answer?When the AirPort Express Base Station (AX) is connected by Ethernet, you will find an option in the AirPort Utility, labeled: Enable AirTunes over Ethernet on the Music pane. Just select this option to allow streaming iTunes via the AirPort's Ethernet port. You should also be able to disable the AX's wireless so that it shouldn't interfere with the nearby TC.
-
I have no sound since updates were installed
I have no sound since updates were installed and trouble shoot cannot fix it what is my problem?
Hi,
Can you post back with the following.
1. The full Model No. and Part No. of the notebook ( from the service tag underneath your notebook ) - see Here for further details.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Since installing iTunes 7.1.1 update only a few days ago strange things are happening.
1. Incorrect disc and track names
I insert a music CD, the usual question comes up: do you wish to import this CD into your iTunes library? I click on yes and wait a second the CD title and tracks are all wrong. usually it is something I imported a short while ago but once it came up with a disc title I must have imported like 6 months ago
Yes I remembered to check the box for automatic gracenotes access but still this error comes up. If unknown disc, and track 1, track2 etc came up that would make logical sense, but I never saw this before.
If I then click on Access gracenotes assuming the data is available it comes up correct.
2. Failure to recognise disc already imported
If I take out the disc and insert again the one I just imported, up comes the question again "do I wish to import?" I thought iTunes was smarter than that.
3. Plying audio affects slide bar action adversely
While checking through sound files in a Finder window, I play an aiff or MP3 file from the Quicktime style control bar displayed there, while the audio is playing the blue bubble at the bottom of the window does not move smoothly when I try to move left or right.
Note:
I've been trying to organise my music library onto a remote hard drive to free up hard drive space. I did this by copying the folders out of the default iTunes music folder into another iTunes music folder on the hard drive such that all the other related folders are present in the main iTunes folder. Could this move be the source of my problems?
iBook G4, 1.07 GHz Mac OS X (10.3.9)Here is the latest on the iTunes problem.
Focussing on iTunes issues only, (I think there are some system issues which I will try to resolve in the appropriate forum).
1. About 6 months ago my hard disc was so full of music fies I moved most of my iTunes music folder content to DVDs for later transfer to an external HD drive.
2. Now I have a small portable HD onto which I have copied all iTunes music folder content into one place. I created a new folder called 'iTunes music' and within Finder I moved the files and re arranged and re-named some of the subfolders to make better sense of the library structure. Incidentally some of the folders seemed to have got locked, and marked as owned by the system? I don't understand how this happened.
3. When I run the iTunes 7 application it finds the new music folder but only a fraction of its true content is displayed as playlists in the left hand column.
4. Thinking that the application would create its own (updated) ' iTunes library' file if it did not find one in the iTunes folder when launching, I moved the existing one to another folder, but the same incomplete list appears!!
So the question is please,
how do I get the application to construct a new and complete iTunes library file?
Have I really screwed things up?
There does not seem to be any reference to this kind of problem in the help files.
C. -
System running slow since installing yosemite
Problem description:
My iMac is running very slow since installing Yosemite. I turned off iCloud for photos and this seems to have helped, but it is still running slow. When I ran this EtreCheck, there seem to be a lot of "failures". What's up with my Mac?
thanks,
todd
EtreCheck version: 2.0.10 (97)
Report generated November 2, 2014 at 2:05:21 PM PST
Hardware Information: ℹ️
iMac (27-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
empty empty empty empty
BANK 1/DIMM0
empty empty empty empty
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 4670 - VRAM: 256 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 10 days 3:20:14
Disk Information: ℹ️
ST1000DM003-9YN162 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Todd's Drive (disk0s2) / [Startup]: 999.35 GB (168.82 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5680H
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Logitech USB Receiver
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Firewire Information: ℹ️
IOMEGA IOMEGA MINIMAX Device 1 400mbit - 400mbit max
S.M.A.R.T. Status: Verified
disk1s1 (disk1s1) <not mounted> : 32 KB
disk1s2 (disk1s2) <not mounted> : 29 KB
disk1s3 (disk1s3) <not mounted> : 29 KB
disk1s4 (disk1s4) <not mounted> : 29 KB
disk1s5 (disk1s5) <not mounted> : 29 KB
disk1s6 (disk1s6) <not mounted> : 262 KB
disk1s7 (disk1s7) <not mounted> : 262 KB
disk1s8 (disk1s8) <not mounted> : 262 KB
Iomega HDD (disk1s10) /Volumes/Iomega HDD : 499.97 GB (74.61 GB free)
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Roxio Toast Titanium 5.1.1/Toast Titanium 5.1.1.app
[not loaded] com.roxio.TDIXController (1.0) Support
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4212 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.ATITechnologiesInc.TVOut (2.0) Support
[not loaded] com.Cycling74.driver.Soundflower (1.5.0) Support
[loaded] com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) Support
[not loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) Support
[not loaded] com.heartmath.emwave (1.1.0) Support
[not loaded] com.lexar.iokit.IOSCSILexarCommandsDevice (1.0.5) Support
[not loaded] com.logitech.iokit.quickcam (1.0.7) Support
Startup Items: ℹ️
RetroRun: Path: /Library/StartupItems/RetroRun
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.gamed.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.recentsd.plist
[failed] com.apple.sbd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
[failed] com.apple.xpc.loginitemregisterd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.softwareupdate_download_service.plist
[failed] com.apple.spindump.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[failed] com.adobe.CS4ServiceManager.plist Support
[invalid?] com.brother.LOGINserver.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.codecm.uploader.plist Support
[invalid?] com.google.Chrome.framework.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.zeobit.MacKeeper.Helper.plist Support
[invalid?] de.metaquark.appfresh.plist Support
User Login Items: ℹ️
System Events Application (/System/Library/CoreServices/System Events.app)
iTunesHelper UNKNOWN (missing value)
.VirexLogin Application (/Applications/Virex 7/.VirexLogin.app)
Dropbox Application (/Applications/Dropbox.app)
My Day Application (/Applications/Microsoft Office 2008/Office/My Day.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
OfficeLiveBrowserPlugin: Version: 12.2.3 Support
OVSHelper: Version: 1.1 Support
RealPlayer Plugin: Version: (null) Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.3.1164 - SDK 10.6 Support
Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Cannot contact Adobe
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
Unity Web Player: Version: UnityPlayer version 4.5.2f1 - SDK 10.6 Support
AdobePDFViewer: Version: 9.5.5 Support
CANONiMAGEGATEWAYDL: Version: 2.1.0.1 Support
Photo Center Plugin: Version: Photo Center Plugin 1.1.2.2 Support
CANONiMAGEGATEWAYLI: Version: 2.1.0.1 Support
JavaAppletPlugin: Version: Java 7 Update 60 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
3rd Party Preference Panes: ℹ️
3ivx MPEG-4 Support
Déjà Vu Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Logitech Control Center Support
MediaLink Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Todd's Drive: Disk size: 999.35 GB Disk used: 830.52 GB
Destinations:
Iomega HDD [Local]
Total size: 499.97 GB
Total number of backups: 9
Oldest backup: 2014-03-31 08:05:18 +0000
Last backup: 2014-09-26 17:26:27 +0000
Size of backup disk: Too small
Backup size 499.97 GB < (Disk used 830.52 GB X 3)
Top Processes by CPU: ℹ️
22% WindowServer
3% Google Chrome
2% spindump
2% iPhoto
1% Little Snitch Agent
Top Processes by Memory: ℹ️
348 MB iPhoto
112 MB Google Chrome
94 MB mds
73 MB AppleIDAuthAgent
52 MB Finder
Virtual Memory Information: ℹ️
97 MB Free RAM
1.04 GB Active RAM
960 MB Inactive RAM
752 MB Wired RAM
120.16 GB Page-ins
4.07 GB Page-outsMy Mac also very temperamental since installing Yosemite, it sounds like it's constantly working very hard no something, it delays when clicking, typing, switching applications, I'm seeing a lot of twirling umbrellas. I've also done the Etre Check report and would be grateful for any help.
Problem description:
System generally running slow, delay switching between tasks, pressing on menus etc, the twirling Apple umbrella showing up frequently
EtreCheck version: 2.0.11 (98)
Report generated 6 November 2014 16:11:01 GMT
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 3 days 6:25:17
Disk Information: ℹ️
Hitachi HDT721050SLA360 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (131.63 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5680H
USB Information: ℹ️
Apple Inc. iPhone
Apple Inc. Built-in iSight
USBest Technology USB Mass Storage Device 4.04 GB
S.M.A.R.T. Status: Verified
JG 4GB KEY (disk1s1) /Volumes/JG 4GB KEY : 4.04 GB (3.24 GB free)
Apple Internal Memory Card Reader
Western Digital My Passport 070A 499.41 GB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
My Passport (disk2s2) /Volumes/My Passport : 499.06 GB (1.89 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
/etc/hosts - Count: 42
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/LogMeIn/drivers
[loaded] com.logmein.driver.LogMeInSoundDriver (4.1.46f67) Support
/Library/Extensions
[not loaded] jp.co.yamaha.driver.YamahaSteinbergUSBAudio (1.8.32 - SDK 10.6) Support
/System/Library/Extensions
[not loaded] com.Huawei.driver.HuaweiDataCardDriver (2.9.7) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMControl (1.1.9) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.1.9) Support
[not loaded] com.novatelwireless.driver.3G (2.0.1) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.0.0) Support
[not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) Support
[not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
[loaded] com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) Support
[not loaded] jp.co.roland.RDUSB0009Dev (1.0.0) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
[not loaded] com.novatelwireless.driver.3GControl (2.0.1) Support
[not loaded] com.novatelwireless.driver.3GData (2.0.1) Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.adobe.CS5ServiceManager.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.logmein.LMILaunchAgentFixer.plist Support
[running] com.logmein.logmeingui.plist Support
[failed] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.teamviewer.teamviewer.plist Support
[running] com.teamviewer.teamviewer_desktop.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.logmein.logmeinserver.plist Support
[invalid?] com.logmein.raupdate.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.teamviewer.teamviewer_service.plist Support
[failed] com.vmware.launchd.vmware.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
[running] com.eltima.Folx.Agent.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[failed] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewer: Version: 8.3.1 Support
LogMeInSafari32: Version: 1.0.935 - SDK 10.7 Support
PrintDialogExt: Version: 6.1.1 Support
googletalkbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
Scorch: Version: 5.2.1 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
RealPlayer Plugin: Version: (null) Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
GarminGpsControl: Version: 2.9.1.0 Release Support
Musicnotes: Version: 1.16.12 Support
DivXBrowserPlugin: Version: 2.0 Support
LogMeIn: Version: 1.0.935 - SDK 10.7 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Google Earth Web Plug-in: Version: 7.1 Support
FolxNetscapePlugIn: Version: Unknown
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.2.4 Support
o1dbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
NPDjVu: Version: 6.1.2 - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
ContentUploaderPlugin: Version: 1.2 Support
JavaAppletPlugin: Version: Java 7 Update 45 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 Support
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
FolxNetscapePlugIn: Version: Unknown
Picasa: Version: 1.0 Support
Safari Extensions: ℹ️
Dashlane
3rd Party Preference Panes: ℹ️
Déjà Vu Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
Java Support
Perian Support
Yamaha Steinberg USB Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 367.62 GB
Destinations:
My Passport [Local]
Total size: 499.06 GB
Total number of backups: 60
Oldest backup: 2014-06-24 23:04:57 +0000
Last backup: 2014-11-06 15:09:25 +0000
Size of backup disk: Too small
Backup size 499.06 GB < (Disk used 367.62 GB X 3)
Top Processes by CPU: ℹ️
2% Dropbox
2% WindowServer
2% cfbackd
1% backupd
0% LogMeIn
Top Processes by Memory: ℹ️
679 MB PhoneView
266 MB Finder
223 MB Mail
206 MB Microsoft Word
206 MB WindowServer
Virtual Memory Information: ℹ️
162 MB Free RAM
2.75 GB Active RAM
2.58 GB Inactive RAM
1.25 GB Wired RAM
22.42 GB Page-ins
166 MB Page-outs
Maybe you are looking for
-
Safari crashes each time I open it
Each time I launch Safari it crashes. I have deleted the cache.db file, which did not solve the problem. I have no plug-ins. The error report is as follows: Process: Safari [1322] Path: /Applications/browsers/Safari.app/Contents/MacOS/Safa
-
File sharing with PCs on Airport Extreme
I have two Mac (one Tiger, one Leopard) and one PC connected wirelessly and two PCs and printer connected via ethernet to a new AirPort Extreme which is connected to a DSL modem. All computers connect to the Internet and the printer with no problem.
-
How to genarate multiple pdf's in XML Publisher
Hi, i need sample code for genarating multiple pdf output files. I am using datasource as "XML file" & Through Application Engine .. How to genarate multiple pdf's.. Please any one help on this issue, and also send me sample code step by step process
-
HT1933 dear sir / madam,
Dear Sir / Madam, Hi, I am prashanth, I am using I-phone 4 since many years. I was very comfortable with the phone all these days. Now, after updating to IOS-7 my phone is giving to much of problem. My major problem is mentioned below: 1.If I scroll
-
I am testing a five page web page that connects to an SQL Server database. I am experiencing severe memory problems in debug mode. The application hangs after stepping through a some code. The debug screen goes all grey and I cannot get it to return