No Sound SlideShows Help Needed!!!!!!!

Hello Everyone:  I cannot get my previously made Slideshows to play with sound in PC's that only have Adobe Reader.   The SlideShows will play with sound on PC's that have Adobe Standard or Professional installed.  My friend also has the same problem.  These sideshows were created with PSE 6,7, and 8, and the old PSA 3.  Does anyone have any suggestions on what is causing this problem and how to fix it????
Thanks any help will be deeply appreciated.
Robert  

I assume you mean PDF slideshows. They open on my PC with Adobe Reader but with a user requirement to allow blocked content.
If I click on the windows strip and authorize the file, I get to hear the sound.
The only other option is to upload pdf's or embed them in web pages so they open instantly in a browser.
　 

Similar Messages

  • Simple Sound Recording - Help needed

    Hi there
    Im wondering if this is possible and if so , does anbody know offhand where I can find a basic implementation of this typea thing...
    I simply need to be able to read in a wav file, then record it and give it a different name. I am just trying to get this basic functionality sorted, because I will be progressing on to reading in a file, runninig some DSP algorithm on it, and then needing to save it back out, so I elieve that I need to write it in chunks much the same as the SourceDataLine buffers the sound...err am i making sense?
    I have been trying to do this with TargetDataLine, and its just getting the better of me at the moment, I am able to read in the file and play it as normal, its just the recording it to an output file where I am failing.
    thanks a million
    conaill

    Do I get you right that you want to read a sound file into memory and then store it back to the hard disk? If this is the case, try this:
    int frameSizeInBytes;
    int bufferLengthInFrames = 32;
    int bufferLengthInBytes;
    byte[] data;
    int numBytesRead;
    BufferedReader mIn;
    AudioFormat format;
    ByteArrayInputStream bIn;
    AudioInputStream outStream;
    File o;
    int soundLength;
    soundLength = 1000;
    f = new File("infile.wav");
    inStream = AudioSystem.getAudioInputStream(f);
    format = inStream.getFormat();
    frameSizeInBytes = format.getFrameSize();
    bufferLengthInBytes = bufferLengthInFrames * frameSizeInBytes;
    data = new byte[soundLength];
    o = new File("outfile.wav");
    // read the sound data
    numBytesRead = inStream.read(data, 0, soundLength);
    inStream.close();
    // now write it back
    bIn = new ByteArrayInputStream(data);
    outStream = new AudioInputStream(bIn, format, soundLength);
    AudioSystem.write(outStream, AudioFileFormat.Type.WAVE, o);This reads only a portion of a file, you'll have to modifiy it.
    Hope this helps,
    S

  • Elements 8 Slideshow Help Needed

    Hello, I have Elements 8 and while creating a slideshow my pictures dissapear or something else happens because when I preview it, all I get is a black screen.
    I've tried smaller pictures, adding sound, saving then previewing, even when I export or share the saved result is nothing but a black screen, no pictures. I hear the music I added, but no pictures. Even if I add a blank slide and add text, nothing. I'm stumped and frustrated. I followed the online video tutorial exactly and still no luck. If anyone can point me in the right direction I would greatly appreciate it. I've had the software for about a year and a half and never used the slideshow part until now.
    Hoping somebody may have come across this issue before,
    Computer info if it will help.
    vista 64 bit sp2, but running adobe in 32 bit
    Nvidia gtx580 graphics card
    12 gig ram
    Intel i7 920
    Thanks!

    First suggestion --
    I have experienced this type of issue with the black screen in preview and it was caused by lack of authorization.  I was running under Vista and I circumvented the problem by starting PSE using Run as Administrator
    -- in other words instead of left clicking on the PSE icon on the desktop,
    -- I right clicked on the PSE desktop icon and chose " Run as administrator" from the right click menu
    The above process was necessary despite the fact that my Windows userid did have administrator authority.
    There is a theory among several people that this can be caused by uninstalling an earlier version of PSE after you installed PSE 8. However, I doubt that is absolutely the only reason.
    Second suggestion--
    If my first suggestion does not solve your problem, then I think the second most probable cause is some problem or inconsistency with the driver for your video card. Your Nvidia gtx580 is a powerful video card -- so perhaps there is some inconsistency with another component on your system. How recently have you updated the driver for your video card ?
    -- Have you ever been able to do a PSE slide show preview ?
    -- Have ever been able to play back an WMV file output from the slide show?
    FYI -
    If this is one of your first alide shows with PSE, I suggest that you also post how you plan to display your finished slide show -- for example - will you burn it to a DVD disc ? Do you also have Premiere Elements ?

  • Slideshow help needed

    I want to load an initial image into onTop_mc,. When the user
    clicks
    next, load another image into onBottom_mc (below onTop_mc),
    then using
    MovieClip.setMask() create a transition from the first image
    to the
    second image. No problem, but for the third, forth,and so on,
    I need to
    do some swapping. Should I :
    1- load img1 into onTop_mc
    2- load img2 into onBottom_mc
    3- perform transition using MovieClip.setMask()
    4- unload img1 from onTop_mc
    5- reload img2 into onTop_mc
    6- repeat as needed
    or is there another way? (will this even work?) I'm assuming
    that since
    each image is already in the user's cache step 5 will be
    significantly
    faster than steps 1 or 2.
    Thanks,
    Bill

    FCP is an option, even iMovie can do that. But personally, as it is "only" a slideshow, I would import all of them into iPhoto and create a slide show with one click and set the music background transistions as well. All done in an eye blink.
    Cheers
    Hisham

  • Loss of sound - urgent help needed

    Suddenly sound has disappeared from track four (have tried other tracks to no avail). I have tried everything but have obviously missed something. Please see jpg of audiomixer http://tv-moen.dk/audiomixer.jpg and http://tv-moen.dk/timeline.jpg
    Sigurd

    Your quick response is appreciated. It now appears that my system soundsettings were at fault and there was nothing wrong with the exported material. I do apologize for making this topic but in my frustration I could not see the forest for trees. This topic is therefore best deleted.
    Sigurd
    PS your observation on 1:31:11 led me to investigate from scratch. Thank you.

  • I have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

    i have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

    First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
    The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV.

  • How do I create my own favorite template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to templates, which take more memory. I have a large slideshow, and need all the space I can get

    First, how do I create my own favorite theme template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to already existing themes, which take more memory. I have a large slideshow, and need all the space I can get. I just want to use a picture as my DVD cover, and then insert a slideshow. Also, when I try to burn my 8.5gb double sided slideshow, all that burns is the music. It is a large slideshow, a memorial on the life of my now deceased brother. This means a lot to me and to my family, and I am having so much trouble trying to burn it. I have gone into Project View and selected appropriately. The bar shows I have room to burn this DVD, but it does not burn.  I have burned so many DVDs in the past, but this one just will not burn. I am so confused at this point. I will say this is the first 8.5gb I have attempted to create and burn. My specs list a 7.7gb or 4.7gb as operable....but there are no 7.7gb dvds. I had to purchase 8.5gb. Help? What am I doing wrong? I have spent so much time on this, and just cannot figure it out.

    Final Cut is a separate, higher end video editor.  The pro version of iMovie.
    Give iPhoto a look at for creating the slideshow.  It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them.  You can select from various themes and transitions between slides and add music from your iTunes library.
    When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
    Save the resulting Quicktime movie file in your Movies folder.
    Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
    Then follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version).  Personal preferences showing here.

  • Help needed on CD740 ???

    Help needed on CD740 ? My CD740 is GREAT , well , it was great !!? The sound and general performance are wonderful , but , it now has a fault !!? Shock Horror !!
    What can it be ?!!? Well , the display illumination has failed , as in , there isn't any !!? Have to use a torch to read it !!? Not good. Now , here's the thing , I want a phone number (UK zone) ?to talk to an actual human and I cannot find one !!? That is soooooo annoying !!? The unit is out of warranty so I want to repair this myself , no worries , I once worked for Philips in their pro studio equipment repair workshop so I know my way around black boxes !! I would like a service manual though so that I can get the case apart without damage. So , can anyone help me with a phone number , pretty please ?!!
    Thanx.

    I tried compling servlet, but it is raising error
    that coul not find package javax.servletWhat I did not mention... you need to add those JARs in the Classpath explicitly. You will find them in %TOMCAT_HOME%\common\lib. You atleast need to add servlet-api.jar to your Classpath. :)

  • Help needed with Vista 64 Ultimate

    "Help needed with Vista 64 UltimateI I need some help in getting XFI Dolby digital to work
    Okay so i went out and I bought a yamaha 630BL reciever, a digital coaxial s/pdif, and a 3.5mm phono plug to fit perfectly to my XFI Extreme Music
    -The audio plays fine and reports as a PCM stream when I play it normally, but I can't get dolby digital or DTS to enable for some reason eventhough I bought the DDL & DTS Connect Pack for $4.72
    When I click dolby digital li've in DDL it jumps back up to off and has this [The operation was unsuccessful. Please try again or reinstall the application].
    Message Edited by Fuzion64 on 03-06-2009 05:33 AMS/PDIF I/O was enabled under speakers in control panel/sound, but S/PDIF Out function was totally disabled
    once I set this to enabled Dolby and DTS went acti've.
    I also have a question on 5. and Vista 64
    -When I game I normally use headphones in game mode or 2. with my headphones, the reason for this is if I set it on 5. I get sounds coming out of all of the wrong channels.
    Now when I watch movies or listen to music I switch to 5. sound in entertainment mode, but to make this work properly I have to open CMSS-3D. I then change it from xpand to stereo and put the slider at even center for 50%. If I use the default xpand mode the audio is way off coming out of all of the wrong channels.
    How do I make 5. render properly on vista

    We ended up getting iTunes cleanly uninstalled and were able to re-install without issue.  All is now mostly well.
    Peace...

  • HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help

    HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help.
    I bought it in South Africa and I am currently in Israel.

    thank you for the response.its not working, tried that. i can switch the machine on and off, can hear the machine when i hold it to my ear. but nothing works, not the screen, not the sound, nothing.

  • Internal Microphone "Not Plugged In". *No help needed anymore*

    edit: no help needed anymore
    Hello. My internal microphone stopped working ever since I stopped using the default Toshiba version of Windows 7.
    I have downloaded all the correct drivers for my Toshiba L750-BT4N22, especially the Conexant SmartAudio HD driver.
    My internal microphone shows up in sounds/hardware, but it says "Not Plugged In". Also, every once in a while my sound get's choppy when I "seek" or move fast through a video file.
    Could use some help, thanks.

    I seem to have fixed it, thanks.

  • HT3986 i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help

    i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help

    Is the volume muted? Click on the volume icon in the system tray to see if it shows as muted. If that's the case, I know of a workaround to fix this because if you unmute the speakers now, the condition will come back when you reboot your computer. I don't know the exact steps off the top of my head at the moment as I'm not in front of my machine. Check this first and reply if muting was the problem and I will detail the steps needed to fix the problem.

  • I don't have sound, please, help me !!

    I don't have sound , please i need help !! Thank you very much

    Hi Mr. Shahid,
    Thanks for visiting Apple Support Communities.
    Start with the troubleshooting tips in this article if you don't hear sound from your MacBook Air:
    OS X Mavericks: If you can’t hear sound from your speakers
    http://support.apple.com/kb/PH13841
    Best,
    Jeremy

  • ONKYO TX-SR805 Set-up Menu HELP Needed

    This is a LONG post, but I would appreciate if you would read it and respond to it.  The settings That are setup might not be the CORRECT settings.  If you think a different setting should be made, please let me know.
    Also right now I only have 2 front speakers (NHT VT-1A), 1 middle( NHT VT-1C), and a NHT SW12 Subwoofer.  I will be hooking up 2 or 4 more speakers for the REAR.
    Here are the settings on my TX-SR805 receiver on the set-up menu.  I could use some help to see if they need set to something else.
    2.2 Speaker Config
          Subwoofer       yes
          Front            70Hz
          Center          90Hz
    LPF of LFE        80Hz THX
    2.6 THX Audio Setup
           THX subwoofer  YES   I don't know if mine is or not
           BGC                    OFF  Not sure what this BGC means
    3. AUDIO ADJUST
    3.1  Tone Control
           Front    Bass      -1dB
                        Treble   +1dB
          Center  Base      +2dB
                        Treble   +7db
         Subwoofer Base  +7
    3.2 DIRECT
          Delay Enable
          DSD                NO   Not sure what DSD is 
    3.3 MULTIPLEX/MONO
          Multiplex
          Input CH       Main/Sub
          Mono
          Input CH         L+R
          Output Speaker  L/R
    3.4 PLIIx/Neo:6
            PLIIx Music   (2ch input)
            Panorama        ON
            Dimension       +1
            Center Width    3
    Neo: 6 Music
            Center Image   5
    3.5 DOLBY EX
            Dolby EX        AUTO
    3.6 THEATER-DIMENSIONAL
            Listening Angle   Narrow
    3.7 LFE LEVEL
            Dolby Digital      -10dB
            DTS                     -10dB
            Multich PCM      -10dB
            Dolby True HD   -10dB
            DTS-HD Master Audio  -10dB
            DSD                     -10dB
    4. SOURCE SETUP
           CABLE/SAT
    4.1  INTELLIVOLUME     +4Db
       .2 A/V SYNC            0 msec
       .3  NAME EDIT         Blank
    5.   LISTENING MODE PRESET
    5.1 DVD
           Analog/PCM      NOT SURE WHAT TO SET HERE
           Dolby Digital      NOT SURE WHAT TO PUT HERE
           NOT SURE WHAT TO PUT FOR ANY OF THESE LISTENING MODE PRESET
    5.8 TUNER (ANALOG)      Neural THX 5.1 is set on mine. Is this correct?
             CD                           ?
    6.  MISCELLANEOUS
    6. 1  VOLUME SETUP
              Volume Display              Relative
               Muting Level               -40dB
               Maximum Volume       +10dB
               Power on Volume        -22dB
               Headphone Level        +2dB
    6.2  OSD SETUP
               Immediate Display       OFF
               Monitor Type              16:9
               Display Position           TOP
    7.  HARDWARE SETUP
    7.4   ANALOG MULTICH
               Subwoofer Input Sensitivity    0
    7.5   HDMI
            ALL under here are     ENABLE
    Solved!
    Go to Solution.

    I gave you some answers in your original post. I wish you didn't start a new one. Here is what I posted.
    Re: ONKYO TX-SR805 Set-up HELP Needed[ New ]
    Options
    Mark as New
    Bookmark
    Subscribe
    Subscribe to RSS Feed
    Highlight
    Print
    Email to a Friend
    Report Inappropriate Content
    01-21-2010 08:24 AM
    Unfortunately this is very difficult because the top half of your post, your really the only one that can answer what the setup should be.  The adjustments are made based on the acoustics of your room and how everything sounds noone can really give you info on it because every house, and room has different acoustics.  The walls, insulation, carpet or bare floors, basement or main floor are just some examples of what can make a difference in sound reproduction.   By the way NHT (Now Hear This) are excellent speakers.  For bass and treble, the music I listen too requires a high treble content so I usually have it at 7 out of 10 but my bass is at 4 out of 10.   The sub base should be fine where it is.
    Did your receiver come with an Audessy mic for calibration.  I would use that for a basic setup and go from there I am not sure if on your unit it will do frequecy but I think it did.
    Your volume settings look fine again personal preference there is right or wrong.
    For you listening mode Preset  you should have an auto setting I am at work so it may take a coule of hours for me to get back to you as I have to go through your manual and see what you would set it up with so please bare with me. I will list the info as I read it so it may not be in the order you have it.
    I will have to make a second post since I can't go back and edit this one.

  • HELP NEEDED FAST!

    Hey, I hava a rather large problem. just so you know, I am american, and run english language everything. my specs are: [Windows XP PRO] [Athlon 64 FX-55] [ASUS A8N-SLI N-force 4 SLI mobo] [2 gigs ram] [2 6800GT s56 MB]. If anyone remembers, a day or two ago I posted a thread called "Driver uninstall/install help needed", that you can find here, http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=28565
    A guy linked me some drivers, and now, when I uninstalled the old ones and was gonna install the new ones, I clinked on the amd64 thing in the suprrt thing, went to ctzapxx, amd it says "C:/Documents and Settings/chief/desktop/drivers/support/amd64/ctzapxx.exe is not a valid win32 application."
    I am now stuck with no sound or drivers unless I use the system restore point I made before I did the uninstall/install thing.
    I would really like some advice, or better yet, and explanation of why they don't work and where i can get some that do. I will bump this if it falls off the 'st page until i get a answer.
    Thanks so much for any help
    EDIT: I'm gonna go to sleep, so I'll check on the thread in anbout 8 - 9 hours when I wake up before I go to school.Message Edited by Hillbilly_37 on 09-08-2005 06:04 AM

    Hillbilly_37 wrote:
    Hey, I hava a rather large problem. just so you know, I am american, and run english language everything. my specs are: [Windows XP PRO] [Athlon 64 FX-55] [ASUS A8N-SLI N-force 4 SLI mobo] [2 gigs ram] [2 6800GT s56 MB]. If anyone remembers, a day or two ago I posted a thread called "Driver uninstall/install help needed", that you can find here, http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=28565
    A guy linked me some drivers, and now, when I uninstalled the old ones and was gonna install the new ones, I clinked on the amd64 thing in the suprrt thing, went to ctzapxx, amd it says "C:/Documents and Settings/chief/desktop/drivers/support/amd64/ctzapxx.exe is not a valid win32 application."
    I am now stuck with no sound or drivers unless I use the system restore point I made before I did the uninstall/install thing.
    I would really like some advice, or better yet, and explanation of why they don't work and where i can get some that do. I will bump this if it falls off the 'st page until i get a answer.
    Thanks so much for any help
    EDIT: I'm gonna go to sleep, so I'll check on the thread in anbout 8 - 9 hours when I wake up before I go to school.Message Edited by Hillbilly_37 on 09-08-2005 06:04 AM
    You're trying to run CTZAPXX.EXE version intented to be executed on 64-bit operating system (eg. Windows x64) while you're using 32-bit XP.
    You find the 32-bit version of CTZAPXX lying in another folder (i386).
    NOTE: When you install/update drivers using CTZAPXX.EXE you do not need to uninstall your previous drivers, but just 'accept' the 'option' asking your permission to stop all shared components while updating.
    Hope this cleared something.
    .jtp

Maybe you are looking for