No sound through the HDMI connector using Qosmio G30-201 & Vista

I am getting no sound through the HDMI connector using VISta.
I have XP and Vista on my laptop.
When i boot into Xp I can get the sound to come through the television but when I boot into vista I have no sound coming through.
I have just reloaded both partions with Xp and vista so it is a fresh install on both and it is still doing the same thing.
Please help.
Cheers
Steve

There is a nice an useful Toshiba FAQ about this issue!
[Unable to hear audio over an HDMI connection on a Qosmio G30 in Windows Vista|http://209.167.114.38/support/techsupport/tsbs/all/-TSB001400.htm]
I found it on the Toshiba Australian site.
I would appreciate your feedback
Bye

Similar Messages

  • How do you get sound through the dock connector to a PC or Mac?

    Where I work they have blocked the Pandora website. (Along with just about every other online radio site.) They don't mind if we listen to music, as long as it's not streamed online through their network.
    I have both a PC & a Mac on my desk.
    What I would like to do is listen to my Pandora app from my iPhone by plugging the dock connector into a Mac or PC. This would keep the battery drain to a minimum & allow for better quality.
    When I plug in the dock connector the phone starts charging & iTunes want's to sync. I can run the Pandora app, but no sound comes through the computer.
    Does anyone know how to get the audio to come from the dock connector & play through the computers sound card?

    You have several choices:
    1. Composite AV Cable: has a dock connector on one end and USB, RCA line out and RCA composite video on the other. It also comes with an AC Adaptor.
    2. Component AV Cable: same as the Composite AV Cable but with RCA component video.
    3. Universal Dock: has a dock connector socket on it and a line out socket.
    4. iPhone 3G Dock or the (original iPhone Dock): same as the Universal Dock but designed just for the iPhone.
    All you need is somewhere to plug the line out into.

  • My iphone no longer displays anything through the HDMI connector

    I purchased a cheap 30-pin to HDMI connector (big mistake) but was able to see my iPhone screen on my TV.  I then added a Lightening to 30-pin connector so I could display my girlfriend's iPhone 5C screen on the TV.  But I had problem taking these two connectors apart and the end of one of them started to come apart.  Pushed it back in.  When I then tried to display her 5C screen, nothing worked.  Then I went back to my iPhone 4 and it also no longer worked.  I thought the cable was bad so I then purchased a genuine Apple 30-pin to HDMI connector and Apple Lightening to 30-pin connector.  But I still don't see anything on the TV for either of the iPhones BUT my iPad 2 does display data on the TV.  Conclusion:  Did I short out something in both iPhone internal connectors?  Has anyone ever see this kind of problem?  BTW, both phones can still be charged without any problem.
    Thanks for the help.

    I'd start by calling VZW support.  They are really good in a situations like this.  I work with them a lot in the Enterprise space.  Sounds like your network/roaming settings are messed up.

  • My ipod video wont play sound through the headphone jack or the bottom connector

    Hello everyone. I have an iPod Video 60GB (supports video output through the headphone jack). Which I believe was the last one before the iPod "classic".
    Anyways awhile back it stopped outputting sound through the headphone jack, I assumed I had damaged the jack itself as commonly happens but it stopped outputting sound through the dock connector to my ipod speaker dock and my cars ipod connector. The clicker wont make any noise either.
    When I tried to search for an answer to this problem years ago I couldnt find anything and knowing it would be out of warrenty I put it aside and forgot about it. Having searched again recently it seems as if this could be the audio processor or some component on the board coming loose? Has anyone outlined this problem with pictures and steps to repair it?
    I *may* take it in and pay the $30 but I would much prefer to fix it myself. Thank you for any help with this.

    Update: The model # is MA147LL. Not sure why my edit didnt take effect.

  • No sound from the TV when using HDMI cable, No sound from the TV when using HDMI cable

    I recently purchased HDMI cable and adaptor, so that I can play downloads from my Macbook Air on my TV. There is only sound from the Macbook, not the TV - Do I need as separate cable for sound?

    I've got the same issue: when I connect my Macbook Air (2011) to TV via HDMI cable there's no sound through the TV system, only from the Macbook Air. I used to use my older Macbook Pro with the same HDMI adapter and it worked just fine, but not with the Macbook Air it doesn't.
    My software is up to date. I tried to select the TV as an output option in sound preferences, but it doesn't yield any results.
    Rebooding multiple times doesn't help either.
    Any suggestions on how to tackle this problem?
    Thanks in advance.

  • Hi i upgrade from lion to mountain lion to day on my mini mac,Since the upgrade i am getting no sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever

    Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
    I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.

    Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.

  • Im connectioning my macbook to my hdmi port in tv.  I am getting no sound through the tv only the macbook speakers.  anyone know how to get my tv to read sound?

    Im connectioning my macbook to my hdmi port in tv.  I am getting no sound through the tv only the macbook speakers.  anyone know how to get my tv to read sound?

    The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. But check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
    If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
    http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2
    The Mini-DVI port doen't carry audio at all. The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports.
    To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion or 10.8 Mountain Lion). When System Profiler comes up check the Model Identifier and post it back here.

  • Why when using keynote on my i-pad do I have no sound through the i-pad speakers and only sound when I plug in external speakers or headphones?

    Why do I get no sound through the i-pad speakerts when using Keynotes but when external speakers or headphones are plugged in sound is there. Also how do you get back to the program page when in play mode on i-pad?

    Whoa, I found the answer by clicking on one of the questions in the "More Like This" box to the right.  I do  wonder how to find that box before posting my dumb question.  The answer turned out to be checking the youtube volume control.  I turned that up and it solved the problem for Comast as well.

  • My Iphone 4s says connected to TV and will not let me watch any videos on Safari, and only plays sound through the device. I have not messed with the settings, and have not connected it to anything bluetooth either. It's update is IOS 6.1.3

    I have an Iphone 4S and It won't let me watch videos on my safari, which I do everyday. It says that I am connectef to a tv, yet I have not connected it to a tv during the entire time i've owned this product. I have not connected it to anything bluetooth either. It plays the sound through the device, but it will not play the video at all. the update is IOS 6.1.3

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer

  • HT201401 My iphone 4 wont play sound through the internal speaker. Will play if I hook up headphones. I have reset it, restored it, and it does the same thing.

    My iphone 4 wont play sound through the internal speaker. Will play if I hook up headphones. I have reset it, restored it, and it does the same thing. I can still hear when i make calls too. The the output button only says dock connector or apple tv.

    If the phone has ever gotten wet it may be damaged. It may also have dirt or a bent pin in the dock connector or the earphone jack. Try cleaning the dock connector and inspecting it with a magnifying glass. Try inserting and removing the earphone plug several times. If you have restored it and that did not fix the problem damage is the most likely cause.

  • How to make the alarm sound through the earbuds?

    With both my 5 and my wife's 4S the alarm (using the IOS clock app) sounds through the speaker, even with the earbuds plugged in. We want to use the alarm through the earbuds only. Is this possible?

    My alarm works fine on my 4 gb Zen using the latest firmware release. The firmware works the same on all 2/4/8/6/32 GB Zens.
    I told you two times that there is something wrong with your 6 GB Zen. Please Contact Creative.
    How many other links are you going to reply to and say something is wrong with your Zen
    You were told by Creative to also contact them. What is your game
    My canned statement: There could be a million things that could go wrong with your Zen player so you will not be the FIRST or LAST to have a problem. Keep in mind, there are many, many others that have a Zen with no problems whatsoever. Things happen, but Creative is there to help. Contact them!
    Cheers
    BTW - For other users not familar with sebastiankf just click on his user name and read his posts and you will see for yourself.

  • Mac book pro playing out audio through the HDMI but only in mono since update

    Hi there
    I've got a mid 2010 macbook pro that used to play audio and video perfectly through the HDMI output until I updated to 10.7.4 and the
    firmware (11E53). Now it plays in mono and only on the right speaker. It seems to have disabled the ability to change audio preferences on my AV receiver as well. Has any one else been getting similar problems ?
    Thanks
    Hughspeers

    First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Since I upgraded my iPod Touch 4G, the HDMI connector to my TV (that I bought from Apple) is no longer supported. Can this be corrected in a short period? Thanks

    As stated in the title, since I installed iOS6 on my iPod Touch 4G, the HDMI connector that I bought from Apple is no longer supported/recognized...
    A bit of a problem, when you buy an accessory to be able to watch videos on any HDMI enabled TV....
    Too bad that nobody checked on it before releasing the OS...
    Is there a solution to be released soon (like very soon)????

    Sometime the following works.
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.

  • Hi Guys,  My iPhone is stuck in a mode where it thinks the headset is still plugged in.   I cant get any sounds through the speaker. Cant hear sms or emails arrive. If the phone rings i hear it but pple cant hear me or i cant hear them.  The phone works f

    Hi Guys,
    My iPhone is stuck in a mode where it thinks the headset is still plugged in.
    I cant get any sounds through the speaker. Cant hear sms or emails arrive. If the phone rings i hear it but pple cant hear me or i cant hear them.
    The phone works fine with the headphones plugged in.
    I have tried all the usual solutions, inserted and removed the headset (at least 50 times)
    Soft reboot
    full restore
    Nothing seems to work. I have searched on this and it seems to be a well know issue but there doesnt seem to be any firm solutions that i can find to fix the problem

    If no change after inserting and removing the headset at least 50 times, powering the iPhone off and on, an iPhone reset, and restoring the iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem.
    Make an appointment at an Apple Store if there is one nearby.

  • I just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear

    i just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear. Please advice how to downgrade to the previous OS

    Please try going to your settings area of your display. Click on General and go to 'reset all settings'
    Good luck!

Maybe you are looking for

  • How can I create a new folder in de tool bar?

    I have several bookmarks of news papers and magazines located in the tool bar. Since they take space I need for other bookmarks, I need to place them in a folder which will also be located in the tool bar. How can do to achieve that?...I did it once

  • How to apply an invoice to a payment on account using Internal Rec?

    As the link invoices to previous payments is now replaced by the new Internal Reconciliation Engine, you now need to perform a Business Partner internal reconciliation. This seems like quite a cumbersome process. The steps are: 1. Open the Business P

  • Ios 8.1.3 wont download in my iphone 5

    I've been struggling for weeks now. first, apps wont download and update. so when i checked the web for solutions, some say that i need to update to 8.1.3, iphone's currently running 8.1.2. but when i tried to download it in my iphone, it shows updat

  • ORE 1.3 support for Chinese characters?

    I'm using ORE 1.3 on Linux, and my database tables have some fields containing Chinese string values. These Chinese string can be displayed correctly in Oracle SQL Developer, but in ORE 1.3 when I pull data into a data.frame, they are displayed as '?

  • Search implementation on website in oracle site studio

    I m new to Oracle Site Studio & Content server and i have to implement search on the site which i have created using Oracle Site Studio designer 11g so can any one please help me out regarding that.It's urgent please. Thanks Regards Vijay Kumar