No sound to woo

I don't know how I can arrange this but I cant get any sound to the woofer on my 5. speaker system.
any body with the same problem or a solution to my problem.
I have an audigy 2 zs and a trust 5. suround sound system.
thanks in advance for your help

Does your speaker system have its own crossover network? So when you just connect the front channels, do you hear bass from the sub? If not, you need to enable bass redirection and find a crossover frequency that works with your speaker system. The signal from the sub output on your card wil be around 5 dB lower than the rest of the channels (it's a Dolby issue), so you need to turn your sub volume up quite a lot.

Similar Messages

No Sound in Viewer

I just downloaded the latest update, which took care of the disappearing video clips issue. However, now I have no audio. Actually, I have partial audio. If I drag my mouse over the thumbnails I have audio. When I play the clip, nothing. Nada. Zip.
Please help.
Thank you.

I rebooted my computer again and the sound started working. Woo Hoo!

Airtunes sound quality

I have an iTunes library in my iMac with all the music files ripped from my CDs in Apple Lossless. The iMac is connected to an Airport Extreme as my wireless router and I have 2 Airport Express as repeters. In the iMac I have the Squeezeserver running.
In one of my HiFi systems I have one of the Airport Express connected via Ethernet cable to a Squeezebox. The digital coax output of the Squeezebox is going to a Genesis TimeLens De-Jitter and from there to my PS Audio PerfectWave DAC. The output of the DAC is feeding my Woo Audio tube headphones amplifier.
Last night I connected the digital Toslink output of the Airport Express to the Genesis TimeLens to then follow the same sound chain as above.
I compared the sound of the exact same song (file in iTunes) one from the Squeezebox and the other from Airtunes. To my surprise they sounded different. The sound using the Squeezebox chain was significant better. More focus, better bass, more realistic and with better texture. The sound using AirTunes was lean and difussed with a huge and un-realistic soundstage.
I don't undrestand if I am using the same source file and the same electronics from the Airport Extreme on why it is so different. I tried the equalizer route with minimal success.
Is iTunes or AirTunes doing something in the processing? I would liekto eliminate the Squeezebox solution but not at the cost of quality of the sound.
Message was edited by: Musicman159

I am not a big fan of using the AirTunes feature of iTunes because it is not Applescriptable and because you can only output to one stream at a time. The sound quality is quite good as far as I can tell. The only time it suffered is when I was using iTunes on my laptop that was playing from the shared music on my server. The stream would get choppy and sometimes choke, but it is working better after changing my wireless router channel to the other end of the spectrum.
It is really nice that it outputs to optical, preserving the digital signal and eliminating the need for expensive shielded cables to reduce noise from all the other wires behind my stereo.
If I were to do it over, I would have saved the money that I spent on airPort Express to use on my irTrans project.

Lock ups and sound looping!

I remember reading something here about people having trouble with their systems locking up and then getting a loud static noise then a sound loop when playing games.
I am getting this about 2-3 times a night now and it is driving me nuts, I do not have temp problems of any sort and I have all of the latest drivers for everything on my system.
Any ideas?
Specs in sig

Set your PCI/AGP Freq to 66.66/33.33MHz.
Increase your DDR Voltage to 2.7~2.8v.
Check if you have any background programs causing all high CPU load times while gaming.

My downloaded text sounds do not show up under the sounds tab in settings after installing 8.1.1. can someone help me please?

i downloaded a couple text tones and since installing 8.1.1, they will not show up under the sounds tab. in fact, they do not show up in my recent purchases on itunes, but when i go to buy them again, it says that i have already bought this tone. I just want to use the tones i paid for as the tones on my phone. not asking much.... thanks for the help. i hope someone can help me get the tones working. thank you.

This was happening to me too but only for some of my songs. I have a mac so I dunno about PCs, but for most of my ringtones I had to create an ACC version in itunes to make them short enough then turn that into a m4r and those all worked fine. But if the song was already short enough and I didn't create an ACC version and just turned the original into a m4r, then it wouldn't appear in my itunes.
so if you're on a mac:
1. go to get info, options, pick when you want the song to start and end.
     Has to be pretty short to work, 30 second or less is good
     if it's already short enough that's fine
2. right click and click 'create ACC version'
     a copy with the length you put in will appear, drag that into a folder or whatever and just type in m4r where m4a would be
     still make an ACC version even if it's the right length
Hopefully this helps someone else.

When i login to my account and it takes me to the desktop, the error sound plays, then the rainbow wheel appears, and finder immediately stops responding

It started yesterday when i was listening to itunes when all of a sudden the music stopped playing and i had to hold down the power button to shut it down and reboot, and then, when i logged back in, the error sound played, and then finder opened up, but the window was grayed out like i had another app selected, bu i didn't, so i tried to open up itunes and the icon started bouncing and then it stopped midbounce and i had to reboot again because finder wasnt responding. now when i log in, the error sound plays, and finder immediately stops working and then i have to reboot again because i cant click anything and i cant properly relaunch finder. please help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Loading sound clips in my swing application

I have searched all the forums, din't find what i want.
I have many small sound files to be played in my application. Even on mouse Pressed, Drage etc etc....
Now I was looking for a better way of Loading the Sound files in memory as the application starts.....
If I use the Clip Interface of javax.sound and initilize them and open a stream, invoke the open() method, and store it in hashmap. So that when ever i need that file i will lookup for that clip and trigger the start() method which actually plays the sound. IS the approach the right approach, will not the Cip object keep the IO handle open, I have nearly 40 Clips to be loaded.
Can any one suggest me the better way of implementing this.
TIA
Zoha

As far as I know,there is no facility for detecting mouse scrolling wheel in JDK 1.3.
Check it in the later releases of JDK.

Problem with sound in my Torch 9860

HI, i have been using Torch 9860 since about a month, am facing a problem since last 20 days. the problem is the sound suddenly goes off. everything else is functional , its just that i cant hear ring tones , cant hear the person talking on other side, if dialled. Every thing goes fine when i open the backcase, take the battery out and restart. This keeps occuring more than 5 times a day. Feeling miserable.. hey could anybody advise me how to overcome this problem.

pkvinayjain wrote:
HI, i have been using Torch 9860 since about a month, am facing a problem since last 20 days. the problem is the sound suddenly goes off. everything else is functional , its just that i cant hear ring tones , cant hear the person talking on other side, if dialled. Every thing goes fine when i open the backcase, take the battery out and restart. This keeps occuring more than 5 times a day. Feeling miserable.. hey could anybody advise me how to overcome this problem.
What is your Operating System loaded to your device? Look at Options > Device > About, third line down beginning with a "v.7.0.x.xxx", What is yours?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Help with sound to LCD TV when using HDMI

I would love any assistance with a problem I am having. I have a new mac mini with a 40" Proscan LCD. I am using a mini-DVI to HDMI adapter and am getting great video - 1080. My issue is that via Keynote I need to get sound to the LCD TV. It is coming through the mini speaker - what do I need to do to get the sound over to the TV? Any assistance would be appreciated!

Welcome to the Apple Discussions!
The user guide which came with your TV should cover the issue in the different connections available for your unit.
DVI is video only. HDMI is audio and video. If you are using an adapter to connect DVI to HDMI there is no audio because of this. So to connect a Mac mini with a DVI to HDMI adapter you will also need an audio cable to run the audio from the mini's audio outport to an audio inport on the TV. This is why I refer you to the user guide for your unit, because it should point out the correct port to use on the TV, as well as point out if you have options for using analog or digital audio. The mini's audio ports can do both.

Apple Mini-DVI to DVI Adapter problem: no sound.

I couldn't find a more suited thread to discuss my issue so, this can be moved in deemed necessary. I recently purchased a DVI cable, seen below, but all I can get is the video to work. When I use the appropriate yellow cable for sound, the TV won't pick it up. It really seems like this is something that can't be fixed, but I figure it is worth asking about. Thanks.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/StoreReentry. wo?productLearnMore=M9321G/B
Message was edited by: grant87

The yellow cable is likely not an audio cable, but an S-Video cable, useful for some projectors that don't have a VGA or DVI port, or many TVs which only support S-Video. If you want audio separate from the computer, most speaker systems at least support RCA Red/White left/right channel sound into the 1/8th inch audio port found on most Macs. Some Macs and sound software as outlined here offer additional channels for sound:
http://discussions.apple.com/thread.jspa?messageID=2458613&#2458613
I've never seen a yellow colored cable used for audio.

How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

What do I need to connect my late 2009 Mac book (mini display port) to the TV and get sound?

I'm totally confused!
I have a late 2009 model Macbook. And I want to connect it to my TV.
So my research has led to believing I need a Mini display port adapter and a HDMI cable - but from some of what I have read, this won't carry sound...
Can anyone clarify this and what I do actually need?

The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with theHDMI.
If you have the Late 2009 model 6,1 White Unibody with the MiniDisplay Port there is an adapter that can combine video and audio to HDMI.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

I have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

i have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV.

I am trying to transfer sound created on a Fantom X7 to my mac and garage band and have gotten so many different directions from others regarding the mode of connection - I am trying to use an interface and usb connection - anybody have advice?

Good morning!
I am trying to transfer sound from a FantomX7 keyboard synthesizer to garageband through an interface (MAudio) and with a usb cable. I see the image of the sound being recorded but I cannot hear anything - I know that there is a speaker button somewhere that must be muted - but I can't find it . Can anyone tell me what I am doing wrong. thanks, Musicmimi.

Good morning!
I am trying to transfer sound from a FantomX7 keyboard synthesizer to garageband through an interface (MAudio) and with a usb cable. I see the image of the sound being recorded but I cannot hear anything - I know that there is a speaker button somewhere that must be muted - but I can't find it . Can anyone tell me what I am doing wrong. thanks, Musicmimi.

A FIX for error message: When I try to open Snood (it's a game) I get this message. Not enough memory {Error # :: 0, in sound.cp@line 101 Can you help?

After years of playing Snood, w/o problems, I started getting this error message, on my iMac, OS 10.5.8,
with 4 GB of memory when opening Snood: Not enough memory {Error # :: 0, in sound.cp@line 101
My MacBook Pro w. Mac OS 10.6.8 did not have this problem.
Initially I thought that Snood raised its minimum requirement to Mac OS 10.6.
I had several correspondences with Snood. Their tech support is great. Quick and thorough responses.
They thought the issue was in Mac's system preferences/ Sound. It was.
I didn't realize that my sound input and output devices were gone.
The fix was resetting the PRAM. I found this advice on MacFixIt.com.
MacFixIt help with volume: http://reviews.cnet.com/8301-13727_7-10415659-263.html
Resetting the PRAM is on Apple support: http://support.apple.com/kb/HT1379
My sound (music!) is back, along with Snood. So glad I reset the PRAM before reinstalling the OS software!
Thank you to Snood, MacFixIt and Apple.
Happy new year all!

Good work, nice post/tip, thanks!

No sound to woo

Similar Messages

Maybe you are looking for