NO SOUND - Tried everything

After one year and one month of ownership my Ipod mini stopped working: There is No sound. But if I put it on the Itrip adapter it is working...It seems that the jack is not recognizing the headphone anymore. Didnt't dropt it
I have:
1) Reseted my Ipod
2) I have use the updater twice
3) Tried new earphones
Noting seems to work.
Is there something else I should try ?

All that's left is either to send it away for service to one of the many 3rd party repair sites (cheaper than Apple), or if you're knowledgeable about these things, open it up yourself. Might be just a loose connection that you can quickly repair.

Similar Messages

Help. No Sound, Tried everything I swe

I have a Soundblaster Audigy 2 card. I have Creative desktop speakers. I have an ATI All-in-Wonder 9800 video card. I have an NVIDIA nForce2 motherboard. I'm running Windows XP. The speakers work when plugged into a different PC. I have uninstalled and resinstalled the card, updated the driver, I have read and followed Jeremy's FAQs end to end, I have run every troubleshooter there is, still no sound. Everything was fine until a couple weeks ago when I was having an overheating problem. In troubleshooting that issue, one recommendation was to update all my drivers, so I did so (yes, I know, doesn't seem to be a logical solution but I was desperate). Didn't touch any speaker settings, cables etc. Next day discovered no sound. I run a second cable out of the 3rd jack (counting left to right when looking at back of card) to my stereo and this still produces sound (e.g. Windows Media Player) but it is not clear. The 2nd jack, the one that used to dri've my desktop speakers just fine, now produces nothing. Again, I have checked every troubleshooting box, read and tested every FAQ, everything. Has anyone had this experience? Does anyone know of any conflict out there - perhaps with ATI or some Windows update? Any help would be much appreciated. Thanks. ps - The only thing I haven't done is run Windows Guided Help for a clean boot since I keep getting the message from MSFT that the download is not available right now.

Went back and figured out how to run the clean boot manually. With a clean boot I can get good sound out of jack #3 but jack #2, which used to give clear sound, is still dead. I can li've with one working jack. However, when I return to?a regular boot, about 5 seconds after the desktop comes up a loud crackling and hissing kicks in. If I'm reading the FAQs correctly this suggests the problem, or at least one of the problems, lies with another program that runs on startup. Any suggestions as to how to isolate and fix?the problem? Thanks.

Curve 9360 custom sound alerts for messages will not work. Tried EVERYTHING.

I have a brand spanking new BlackBerry Curve 9360 that just arrived yesterday. It is great apart from this very frustrating small prob. I can not customise my message alerts for individual people in my address book. When I click on "try it" only the LED button flashes and there is no sound or vibration. I am trying to get the sound and vibrate to play as "active profile" but it just won't. I can override it and have custom volume and vibrate that plays no matter what the profile but as I sometimes like to set my main profile to vibrate or silent, it won't do.
So far, to fix it, I have tried:
Wiping profile and sounds from the blackberry software
Full factory reset
Creating my own profile and using that instead of "normal" or any of the other preset ones
Loads of battery pulls before and/or after any changes
I have also had a few different people text me to make sure the problem isn't just the "try it" feature. It isn't. The sound that plays is always the default message sound for whatever the default profile is.
If anyone can help it would be greatly appreciated
Deb

I have also experienced exactly the same problem.
The profile is set on normal, with the ringer volume on 10, the ring tone has been selected, and I have also selected the option of the vibrator along with the ring tone.
Now here is the problem, initially it rings and works perfectly, however it seems to automatically turn off the volume so the LED light keeps flashing, however there is not ring tone or vibration.
If you select the "normal" profile or any other profile and change the ring tone or the volume, and click on the try it icon at the bottom, it still only flashes the LED, with no sound.
Have tried everything that you have mentioned in your email, however still unable to rectify the issue. the only way to rectify is it to hard stop the BB, by pulling out the battery and restarting the Blackberry.
Can anyone help or suggest what needs to be done ?

TS3274 The sound on my ipad 2 is not working. I have a Logitech Keyboard case that I use with my ipad 2. Last night, the sound quit working. I've tried everything to get the sound back - still no sound. HELP!! Please?

Trying to get the sound working again on my ipad 2. I have a Logitech keyboard case I use with my ipad 2. Last night the sound quit but I don't know why. I've tried everything and can't get the sound back again. Help!

HI there,
There are a couple things you can try. The first thing I would recommend is resetting all settings by going to Settings > General > Reset > Reset All Settings. If that doesn't work, take a look at the article below for additional troubleshooting steps.
Note: The article title impies that it is for iPhones, but the troubleshooting steps are still aplicable to iPads.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Hope that helps,
Griff W.

Since updating to iOS 6, my 4th gen iPod touch, and my 3rd gen iPad has sound in and out. Sometimes it's on, and then all of a sudden, no sound. I've tried everything from restarting to fully resetting each one starting fresh, but nothing. Please help.

Since updating to iOS 6, my 4th gen iPod touch, and my 3rd gen iPad has sound in and out. Sometimes it's on, and then all of a sudden, no sound. I've tried everything from restarting to fully resetting each one starting fresh, but nothing. Please help.

I have exactly the same problem. I have tried almost everything and I am nowhere near an Apple shop as I am working in Africa.
Did you manage to find a solution? Help please if possible. Regards Az

My ipad has no sounds. I tried everything that the internet community says but still no sounds even the apple technician where I bought it doesn't know why

Pls need your help badly. I tried everything that internet community suggested but still I don't have any sounds... I tried contacting tech personnel where I bought it but even they can't resolve my problem.. Sometimes I here sounds for 5 mins then puff it goes off again... Hope you can help me..

Hello bing5423,
The following article provides steps that can help get your iPad powered on again.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen

I'm having problems with facebook notifications. The sound doesn't work but shows up in banner. Any suggestions? I've tried everything but restoring. Is it a phone problem or an app problem?

I am having a problem with facebook notifications. The sound doesn't work but appears as a banner. I've tried everything but restoring the phone. Is this a phone problem or an app problem? Has anybody experienced this problem and were they able to correct it?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

My Aluminum MacBook Pro will not startup (no chime), only sound is the dvd(dl) that is spinning inside. I have tried everything I know (dmc? reset), still disk spinning but no chime, (this is a spare-backup).

All of a sudden,will not startup (no chime), only sound is the dvd(dl) that is spinning inside. I have tried everything I know (dmc? reset), removing 1 memory module at a time and trying to startup, still no chime only spinning of disk, still disk spinning, (this is a spare-backup), and I dont want to spend alot of $.
my next ts is to open it up and disconnect the dvd drive (maybe it is hung up????) the hd is the original 1, maybe the power supply.......ANY suggestions?

bump, I think ill cook my book...............

My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

I had this problem with my 4s a couple of times when I'd taken the headphones out and it hasn't registered it. My solution was easy, all I had to do was turn the phone off and then on again.
Although I'm sure you've already tried this its a sometimes forgotten and very easy solution to a lot of problems. I hope you find out what's wrong.

No sound at all for incoming calls, txts, games i tried everything reset, restore , delete content and reset , reset network settings. Alarm sounds work but notification sounds don't work please and mute button is in ring mode

No sound at all for incoming calls, txts, games. I have checked the side mute switch. Volume is all way up. All notifications are on. I can hear tones when I go to change them. I can hear my music. I can hear talking on videos I have taken. I have tried everything I know to do(reset,restore,reset network settings,reset content and other settings and mute button is not ON)Please help!

This is exactly the same problem I am having. I dropped the phone one time I think that was the reason. Now I cant seem to find any solution to fix it and it will cost me $149 to buy a new phone? There has to be a way to fix this problem.
When I put it in speaker phone I can hear but not voices through the phone.

Got a new 4s today. there is no sound at all. not a whisper. there is with headphones but none without. ive tried everything i can think of, reset, fiddle with the sound settings etc but nothing. Any ideas please?

Got a new 4S today. It has no sound at all. not a whisper. there is with headphones but none without. its as if the speaker is not working. ive tried everything can think of, reset, fiddle with sound settings etc, checked ive got sound on and volume up. any ideas?

Check the mute switch. It is located just above the volume controls. If it is displaying orange, it is on, flip it in the other direction to turn it off.

My iPad sound to videos and music doesnt work I have tried everything the sound bar is gone

My iPad sound to videos and music doesnt work I have tried everything the sound bar is gone

Not sure if this will work, but you could try the app My Contacts Backup. This will back up your contacts as an email attachement. Send the email to yourself. Then turn off contacts syncing (to erase the contacts from your phone), open the email and tap the attachment to re-import the contacts to your phone. You will still have to go through them and remove the duplicates but at least they should not be duplicated again. (There is an app called
Remove Duplicate Contacts and Events that claims to be able to find and remove duplicates but you'll have to read the reviews in the app store to decide if you want to try it.)

TS1424 I rented a movie to play on my iPad. With 28min remaining the picture froze but the counter kept running. No sound. I tried everything....I reset my iPad...logged out of iTunes and logged back in and opened movie. It stopped at the same spot the ne

I rented a movie to play on my iPad. With 28min remaining the picture froze but the counter kept running. No sound. I tried everything....I reset my iPad...logged out of iTunes and logged back in and opened movie. It stopped at the same spot the next time

SharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D

I have tried everything but cannot get sound on my ipad 2

I have tried everything on trying to get sound on my ipad....completely restored to factory settings, tried mute buttons and all the guides on web.
Can anyone help.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

I have a stuck CDR disk in my MacBook. I have tried everything and nothing works. When the computer starts it makes weird sounds and also when I try to eject it. Nothing Works! Please Help.

I have tried everything and nothing works. When the computer starts it makes weird sounds and also when I try to eject it. Nothing Works! Please Help.

I had that happen with a MacBook. It turned out that the metal case above the slot was slightly bent down.
Putting a flat blade screwdriver in the slot and gently twisting it to move the metal case up allowed it to eject. Don't put it in too far you only want to bend the case not the drive.
The case can get bent down by picking it up with your thumb pressing down on the case above the slot.

NO SOUND - Tried everything

Similar Messages

Maybe you are looking for