No sound unless plugged into speakers.  Side controls also don't work.

Volume side controls do not work and I do not have any sound unless plugged into external speakers.  I have also tried to see if the speakers were muted in the control panel and they are not.

Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

Similar Messages

  • My iphone will not come on unless plugged into the wall charger

    my iphone 4 went completely dead since then i tried chargeing it with a charger bought from sams wholesale which was an aftermarket charger which did not work i then plugged it into the factory wall charger it comes on but says searching for signle i talked to apple support ny telephone and they said i need to restore my phone but unless plugged into the wall the phone will not come on please advise on this

    rustyfromhouma wrote:
    i do not have anything on my phone stored
    If you mean you didn't backup or sync your phone, everything on it will be lost when you get a replacement unless the techs are able to do this.  Apps can be re-downloaded.

  • My iphone is fully charged but it will not turn on unless plugged into a charger

    my iphone is fully charged but it will not turn on unless plugged into the charger in the wall, it wont even turn on when connected to the computer!!!!!!!

    Hi there. Any luck with your phone? I'm having the same problem

  • Ipod nano keeps turning off mid song unless plugged into a power source

    ipod nano keeps turning off mid song unless plugged into a power source

    Hi,
    I got the same problem, I just got it last night and charged it for more than 3 hours but with the same problem

  • Every time I plug in my headphones into my Macbook Pro, my volume control buttons don't work.

    Every time I plug in my headphones into my Macbook Pro, my volume control buttons don't work. Even after I unplug my headphones they don't work, they get stuck on the level of volume it was at when I plugged in the headphones. I can control the volume if I go to system preferences and do it that way, but that is such a pain. Also, in order to get the buttons to work again I have to completely restart my computer which is also a pain! What should I do, or can do, to fix the problem?

    If you have have  lion system, herebis a digital/analong output, youmcan a tooth/Qip with the the tip cut off you can  you can stirrted s very gently to the input/put is a digital/along output devivce\\\\\\\\\\\\\
    The dual input/digital input
    a annaolg/digidal, an toothpick/Qtip with the cutit off gentely wiggle  the the the input/put should then looen the the right the, should loosen the sticky switch to the lne.

  • Ipad won't start unless plugged into the wall or earphone jack in??

    My ipad3 running iOS 7.1 won't start up unless plugged into the wall or earphone jack in.  Battery fully charged and works fine once I get it to start.  I have tried powering it off and rebooting but to no avail.  Any help would be greatly appreciated..

    Hi there Learg,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W. 

  • When iphone 4 locks, wont show screen unless plugged into charger real quick. help please

    hi, so when my iphone locks, i cant see the screen again unless i plug into charger real quick. Home button works, sleep button has been broken. what do i do? i made it so auto locks never happens.

    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28,  29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or  1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are  allowing communication between your device and update servers. If you  still see the error message when you update or restore, contact Apple support.

  • My sons iphone will not come on unless plugged into wall charger. even then wont work

    my sons iphone will not come on unless plugged into the wall charger. even then when the screen finally comes on it has the wrong date and just says searching. wont do anything.

    What troubleshooting have you tried? Try a reset, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot. If it does not, then you need to try and restore via iTunes. Try connecting the phone to the computer and iTunes and see if it is recognized. If not, you will have to force it into Recovery mode and restore. See this support document for that help. http://support.apple.com/kb/HT1808

  • HT4972 My ipods screen is black and wont turn on unless plugged into the wall

    My ipods screen is black and wont turn on unless plugged into the wall not the computer but when i plug it into the computer and put it in DFU mode it wont restore there is an error 3194 and error 1602 and nothing i do helps

    Here's what I found about error 1602:
    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert,update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3194 is also seen when somebody is trying to restore jailbroken devices.

  • My ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off.

    my ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off and also it wont be recongnize by my computer .please help

    I'm having the same problem.  I'm using a new shuffle usb cable in my 2nd generation shuffle and nothing shows up on computer.  I'm wondering if the dock for the second gen is different than the new usb cable direct into the 2nd gen shuffle. I don't have a dock for it.  Before I buy one on ebay I hope someone can assist.

  • Have my MacBook Pro plugged into a monitor and also using a wireless keyboard. I want to close the macBook but every time I do the monitor turns off - is there a way to avoid this?

    Have my MacBook Pro plugged into a monitor and also using a wireless keyboard. I want to close the MacBook but every time I do the monitor turns off - is there a way to avoid this?

    Press any key on the wireless keyboard after you close the MBP and it goes to sleep. The computer will wake up with the external monitor as its display. This is called Clamshell mode.
    http://support.apple.com/kb/HT3131

  • I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

    I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

    The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
    Tell us what steps that you are taking to configure the Express and what happens after each step.

  • MacBook Pro 2.3 os 10.6.8 control-C and Control-v don't work

    On MacBook Pro 2.3 OS 10.6.8, control-c and control-v don't work in any app Please help

    If you mean copy and paste, that's Command c and Command v, not control key.

  • M30 - Front Mode and Audio/Video Control buttons don't work

    Hi
    The Front Mode and Audio/Video Control Buttons Don't Work
    Any ideas?
    Thanks

    Hi
    As far as I know the Toshiba Controls utility is responsible for key usage.
    Did you try to install Toshiba Controls?
    Check the Toshiba driver page for this driver.
    Bye

  • My screen brightness control buttons don't work windows 8

    my screen brightness control buttons don't work?
    the light in the mute button is always on when NOT on mute?
    Have set up Win8 3 TIMES but get always same bug agan 
    Hope someone can help 

    Hello smarisig. I understand you are not able to control screen brightness from the keyboard on Windows 8. By chance, did you upgrade to Windows 8 from Windows 7? I have located an online forum that contains troubleshooting on this issue: http://thedailybuggle.com/forum/unable-control-screen-brightness-windows-8-a-200.html
    The person who posted the issue on this forum had upgraded from Windows 7 to Windows 8, and then this issue occurred. That is the reason I asked if this Windows 8 was upgraded. Regardless, follow the troubleshooting presented and it could resolve the issue for you. If not, let me know and I will continue to research the issue in the meantime. I'm only here to help!
    Mario
    I worked on behalf of HP.

Maybe you are looking for

  • I have two iCloud accounts .mac and .me. My contacts are duplicated 2 and 3 times. I only want one account.

    Somehow, I ended up with two iCloud accounts. A .mac and a .me. I only need one but can not make the .me the primeray one (it tells me that the email is already in use). Anyways, I also have my contact records duplicated 2 and 3 times. I went to the

  • How do I send my Multisim circuit in a pdf to my professor

    How do I send my professor my Multisim circuits project as a pdf? My professor told me he was unable to to view the project simulation results. He told me to send in a pdf or MS Word document and I don't have word. I know there has to be a answer in

  • Ipod icon not in 'source' list

    HELP! On accedent...(I didn't think I needed to read the manual because by brother was showing me how to work it) I disconected the iPod when it said 'do not disconnect' just a couple of times. Is that a big deal? Only once has the little ipod icon a

  • Photoshop Album 1.0

    Hi We have 11000+ plus photos all carefully cataloged in Photoshop Album 1.0 on my old Windows XP PC. Our new PC is Windows 7 Home Premium with Photoshop Elements 9. How do I import our existing catalog and continue sorting our new photos into our ol

  • Screen goes partially black when using Motion or Compressor

    Hi, I recently upgraded my RAM to 3 GB and am experiencing a problem I never had before. I assume it's related. When I have FCP, Soundtrack, and Motion open sometimes the screen will go mostly black when I play my simple animation in Motion. Parts of