No sound using ATI all in wonder Multimedia Cen

I am having a problem with sound, When using ATI's Multimedia Center version 9.2, and an Audigy 2 sound card, I do not get any sound when I use the video capture capabilities. The manual statues that I should use "line In" as the default audio source, but "Line In' does not come up on the drop down list. Sound works for everything else, just not MMC.

Jeremy, the ATI support says there is an incompatibility between Audigy and All in Wonder cards. It has a link to the creative labs web site and mentions that there is a custom driver that rectifies this problem. it mentions getting driver 250 or higher.
Can you let me know what the part number is for the driver mentioned in this section?
This the section from their website
Using the ATI ALL-IN-WONDER? with Creative's Audigy family of Cards The Creative Lab's Audigy family of sound cards has architectural differences from earlier SoundBlaster products in order to provide enhanced audio quality. These changes have an impact on how the ATI Multimedia Center? works when an ATI ALL-IN-WONDER? is used with an Audigy card. To partially address these issues, Creative has made available a special version of their drivers, which allows the ATI Multimedia Center? to function correctly. These drivers are version 250 (or later) of the Audigy drivers. Please make sure you are using the correct drivers.

Similar Messages

Has anyone used an ATI All in Wonder 128 Pro with the 845E Max? Are they compatible?

I have an 845 E Max and an old ATI All In Wonder Pro 128. The ATI is a Rage Pro 128 with a Universal Connector Type and AGP Spec of 2X. MSI says it will work, but I fear conflicts with a vid card that has 3.3v spec for a 1X.
Anyone have any advice?
Anyone have any recommended power supplies for the 845E Max?

http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=313
Support AGP 4x slot (1.5V only)
i would say you cannotr use it based on what you have said

KT4AV-L / ATI All-In-Wonder 9200 Problems

Hi All,
A few months back I purchased an ATI All-In-Wonder 9200 AGP video card for my system. I had a flawless installation of this card and it worked fine until about 2 days ago when, all of a sudden, it stopped working. Keep in mind, this is part of a dual monitor system -- I also have an old ATI XPERT 128 running on the PCI bus to support a second monitor.
So, I opened the case, took the card out, re-inserted it. Problem still continues, this card will not work. Windows reports it as a CODE 12 error in my hardware profile, saying that the card doesn't have enough resources to start.
The really weird thing is that this probelm sees to be feeding of of each other on the two different video cards. With just the 9200 installed, D-Bracket reports a red light on LED #1 and will not post... if it's just the XPERT, it shows red on 2 and 4 and will not post... but with both cards in the system, I get functionality out of just the XPERT, system posts, and runs like normal, but only the XPERT will work. These cards do work separately in my old MB.
Power supply specs are as follows (although I am about 99% sure this has nothing to do with my problem):
ANTEC P4 ATX12V rated as 3.3-28 5-38 12-16
Other info as follows:
MSI KT4AV-L MB
256MB Centon DDR2700
ATI All-In-Wonder 9200 AGP 4x 128mb
ATI XPERT 128 PCI 16mb
(no other add-on cards)
Any input on this would be greatly appreciated, I'm pulling my hair out over this.
Thanks!

Sorry, I'll clarify... the cards do work separately in my old mobo, I can plug in either one and get normal post and boot... neither card works on its own in the KT4AV. If I plug in both cards I get output on the XPERT only, but the XPERT won't work without the AIW on the KT4AV. The AIW won't function at all on the new mobo, either as a single video card or with both plugged in.
And what I mean by no other add-ons, I mean no other cards. I'll post a full system configuration:
KT4AV-L Mobo
AMD Athlon XP 2200+
256 MB Centon DDR2700 RAM
Maxtor 2B020H1 20 Meg HD
LG 16x10x40 CD-RW
Generic 45x CDROM
ATI AIW 9200 AGP Video
ATI XPERT 128 PCI Video
ANTEC P4 ATX12V 400 Watt
Rated: 3.3@28A, 5@38A, 12@16A
I did try unplugging my CD drives the other day to see if it would make a difference and it didn't change anything. It seems to me that it could be a GART issue but I'm not sure since I don't know too much about how that works. I don't do any gaming on this machine, I've had it configured up for home recording studio use, hence why the two monitors comes in handy.

MS-6309 V2.x problems with ATI-All in Wonder Pro AGP 2.X

I have a MS-6309 V2.x and are trying to have my ATI-All in Wonder Pro AGP 2.X working on this Mainboard ! The computer crash after loging and restarts imediately ! this repeats to the invinity ! I have the latest bios update ! Some one with the same problem please tell me about your work arround !

Ok ! I have figured out the problem largely because of your aid on this forum ! Thanks to all !
The problem is the compatibility with the CPU's !!!
Well here are all the information found on the CPU's
I have a : Pentium III costa rica
850/256/100/1.7v
3045A586-1116 SL4CC
The Pentium III is the big problem It crash all the time on all systems !
and a : Celeron
900/128/100/1.75v
Q151A233-0248 SL5LX
The celeron crash when it whant's on Windows and crash from time to time when I use certain Software on Linux system
One question does your Bios Upgrades include the microcode for these CPU or is it the Operating system (Under Windows) update.sys that does the updates !
It's not the ram responsible for the crashes but the CPU'S !

Need help connecting Audigy 2 ZS Platinum Pro to ATI All-in-wonder 9600XT to get sound from tv tu

Recently purchased an Audigy 2 ZS?Platinum?Pro sound card. I need help figuring out how to get sound when I us the tv tuner for my?All-In-Wonder?9600XT video card. The audio output on the video card needs an audio input to connect on the sound card, but this sound card?does not appear have one.
Does anyone know how I can connect the video card to sound card so I get sound when using tv tuner? Where is the micro In line?I have it on the front panel on the external unit!!? But I would don't use this In line for this application!On my old sound card SB Li've! Platinum, I had a line at the rear PCI card (Line In & Micro Line In) and I had two others Line In on the Front Panel, It's the best, but this old card work only with Win 98 or Win 2000.... ? My new system have WinXP Pro!!!!I buy a new SB card (Audigy 2 ZS Platinum pro), but How to get sound fromo the TV tuner and what's the best setup for my micro (for MSN, Skype) ??Help will be greatly appreciated.

Anybody wants to help me ?I wait your answer for my question...!
Thanks

Mega 180 and ATI All in Wonder Cards

My Asus A7N8X Deluxe mobo fried on me last night and now I'm looking to use the parts I have in another PC. I have an All in Wonder Ati Radeon 9600 Pro video card that I would use as a TV tuner. Paring this with a AMD Athlon XP 2100 CPU, 512 Kingson PC2700 RAM, 30 gig/250 gig WD HDDs, Sony DVD Burner, would I be asking for problems?

Quote
how can you tell?
look on the sticker, it will say either "Kingston ValueRAM", or the part number begins 'KVR...'
as far as i know, the only way to disable dual channel is to use one stick of RAM, as Mega 180 only has two slots

875P Neo-FIS2R & ATI All-In-Wonder 9800 Pro

Newbie here, just not to computers...
would like some help in diagnosing a problem on my NEW PC//all parts are brand new w/ 1st boot being yesterday//components listed below
875P Neo-FIS2R
P4 2.8GHz 800MHz FSB//cooled Turbotake Spark 7+
1GB Samsung PC3200 - 512MB a stick in DIMM 1 & 3//cooled Turbotake Memory Cooling Kit 40mm Fan
2 - Maxtor 120GB - Striped on Promise Controller on mobo
Allied AL-B500E 500 Watts
Fans out the ying/yang//stays very cool//does sound like an airplane taking off though
My problem is since the first time on boot ithe boot screen, BIOS setup, Windows Startup screen and not quite as bad the Windows environment, the display is messed up//in POST it shows as black squares about every 1/2" all over the screen//Windows shows them, only smaller//now because this is happening during POST makes me not beleive it is the drivers//I have DL the latest from ATI//cannot find a firmware upgrade for the card//updated the mobo BIOS to v1.8//tried 2 different OS's//Win98SE & XP Pro//changed and tweaked the settings in BIOS all w/ NO JOY!!!//at this point I am getting a little upset//I really am hoping that I did not get a bum video card//I would have tried another one but I do not have one that will install in the new mobo
Anybody got any ideas or experienced the same problem?... TIA
hardRESET

You guys are great on the fast responses!
DOS, I did try the memory removal and that did not work. The sound card is in my signature but is still sitting on the bench waiting installation, so that is not the an issue. I did, however open my old box and checked it's AGP card and it is a Matrox 400 Dual Head. I put it in and tested it and it works great, well not great, but it does not have the display issues that the AIW did. My question is, do you think it is the mobo that cannot support the latest release from ATI? Or maybe just a bad card?
medafor, I had already tried that as well. But thanks for the response!

ATI All-In-Wonder 9700 Pro

I just bought the above card and have a K7T Turbo 2 mother board. When installed, my system will not even boot. All of my drivers and bios are updated to the latest ver. It is plugged in properly to my 350w PS and still will not boot. When I unplug the power to the card and it will boot and beep a couple of times and come up with a message to my monitor saying to plug the power supply into the card. Now I can take it over to my buddies place and his will boot right up? Any Ideas?

Your 350 W power supply might be not strong enough for your new graphics combo card. What is combined 3.3+5V wattage of your power supply?
Read this:
http://www.msi.com.tw/program/service/forum/index.php?threadid=1515&boardid=16&styleid=1

ATI All-inWonder 9800 Problem

Has anyone reported any incompatibilities between the K7N2 Delta ILSR and the ATI Radeon 9800 All-in-Wonder?
Finished assembling my computer, and would not boot up. Turned on power, fans started to spin, but then everything stopped. Disconnected everything and started to troubleshoot. Found that when I removed 12v power cable from the video card, the computer would at least start up, but then I get the ATI error message that I need to connect the power supply to the video card to continue.
Next step is to install video card in another computer to see what happens.
K7N2 Delta ILSR
ATHLON 2700+ Processor
1Gb Crucial PC3200 RAM in 2 banks
2 x Maxtor 80Gb SATA drives, RAID 1
ATI All-in-Wonder 9800, 128Gb RAM
No idea what BIOS versions I have, haven't been able to boot up to find out.

Quote
Originally posted by NrthnStar5
NO, don't buy the power supply. I had the K7N2-ILSR with the 9800 Pro all in wonder. My computer did the same thing yours did. I was using a 300W power supply, i thought that was the problem. My friend had an Asus Mobo (more power hungry then the MSI) with the same video card, and he was using a 350W antec. So, i bought a 350W antec. Well, that didn't solve my problem. I got another motherboard, The KT4V... and NO problems at all. When i took the K7N2 back, the guy said ATI won't run on Nvidia chipsets, so i believe it is a compatibility issue with the chipset and the ATI board. I've been trying to find a fix, because i like the K7N2 board better, it's faster and performs better, but i haven't had luck yet. If you need any assistance, or do find a sure fix, let me know. I'll take the KT4V back, and get the K7N2. But, it isn't the power supply , you do not need a 400W.
Hi,
Whoever told you that ATI won't run on Nvidia chipsets doesn't know what he or she is talking about. I've installed many ATI Radeons in many Nforce 2 boards and they run just fine. They had a problem previously with the bios where you would have to reboot a couple of times to get the video to come up, but that was corrected in the latest bios release as previously mentioned by Raven. As far as running these boards on a 300W PSU, there are a few people doing it but their on the edge. It doesn't matter the watts, it's the max amps on the rails that matter. I use Antec power supplys in the machines I build and I will not place one under 430W. I have a 550W in my own. A lot of things come into play with a PSU, you can't just say a 350W is suitable because CPU, Memory, Drives, Video and all other components such as case fans etc. draw from your PSU. So it depends on how much is in your machine.

Neo platinum not booting with all in wonder?

I've got a k8n neo platinum with a 2800+, a gig of crucial pc3200, an Antec sonata with it's True380S powersupply, and an ATI all in wonder 9700 pro.
The first time i booted it, the fans spun for a second, then they shutoff, thats all the happened. Nothing on the screen, just 4 green lights on the D-bracket for the time that the fans are on. I later replaced the VGA with an old Nvidia Geforce MX i had lying around. It booted fine, so I installed XP and the minimal stuff. I also installed MSI's chipset GART vga drivers, and tried to install the AIW again. It booted perfectly, so i assumed the problem was over and installed ATI's catalyst and the appropriate software that came with it. Upon restart after the installations, nothing happened. Same problem as original. So after i switched it out for the nvidia again, i tried a system restore back to when i had it working, but it still didn't work. Can anyone help me as to whats wrong? I've checked the bios and as far as i know it seems ok, i'm going to flash it in a little bit.
Thanks,
Bill

Have you got the USB connecter to the Antec sonata front panel. If so this may be the cause of your problem.if your front usb does NOT work with your k7n2 board read this... Don't worry that it's not your mobo the MSI pin outs to the USB plug are common.
luck

When using FaceTime, all other sounds are muted. This defeats functionality. When will this be corrected?

When using FaceTime, all other sounds are muted. This defeats functionality. When will this be corrected? Does anyone know of a "fix" for this problem? This definately is NOT a feature.

yes, that is exactly what mine did too. I noticed that something is wrong after receiving calls and did not hear anything.
It was like the IPhone did not realize that the headphone is not any longer plugged in. I m not sure weather I plugged/unplugged the headphones after this more than once but it startet working correctly.

ATI 128mb All-In-Wonder 9800 pro

Installed a ATI 128mb All-In-Wonder 9800 pro on a k7t turbo2. Works fine with out the 9800 installed. When installed, it wont start. Computer wont even turn on. Wont start up at all if the powersupply is just hooked up to the motherboard and video card. It wont turn on at all. The power supply is a true blue 480 w antec. Im pretty sure it isnt the powersupply. I dont want to upgrade my motherboard right now because of minimal funds. I know that my motherboards max vga is 4x and am willing to have the video card run at that, but just dont know how to do this. Please Help.

Quote
Originally posted by Toenne
Is there an additional 12v-plug on your vga-card? Connected it to the psu?
http://images10.newegg.com/productimage/14-102-297-05.JPG
Ok, if your cable looks at all like that, which it should because that's the exact card you have, then one end goes to the molex on the powersupply and the ohter end goes NOWHERE. That other end is just another version of the molex connecter. It does not and I repeat does not goto to the hard drive.

No Sound using FMLE

Hello all, I just install flash media live encoder and after many check up, I have no green square next to the video that indicated that it capted the sound provide by my sound card.
I check with 2 other capture card programm and I hear the sound correctly.
I'm using windows XP (latest update done)
FMLE 3.2
I have a Radeon All-in-wonder 7500
Audio card is a soundmax
Under settings, I choose Line-In and check Active.
Is there a problem that the FMLE cannot take a capture correctly ???
Thanks for the help

No one can help me on this ???
It's the only programm that cannot take the sound from my sound card !

875P INF Drivers and Radeon 9800 Pro All in Wonder

Please help; I am at my absolute wits end. I will try to be brief but I doubt that there is much chance that it will be. Basically I have narrowed things down to this. My video card is a Radeon 9800 Pro All in Wonder 128mb version. My motherboard is a MSI 875p. Lately I realized (long story not important) that I did not have the inf drivers from intel installed for my mobo. This seemed to make sense as to why I was having display issues in games; IE Morrowind. So I installed them, and when I rebooted I was pleasantly surprised to find that the monitor would simply turn off right before I could get to the login. Now I have reinstalled windows several times and installed several different combinations of intel inf updates with different version of the Catalyst drivers. Pretty much, if I have the INF drivers installed, I will not be able to get into windows. However, if I don't have them installed (like right now) normal things, like typing this message, I can do, but I can't play any games . From what I have read I am thinking that it is one of a few things. A, it has something to do with the AGP driver/ and voltage setting things. Many people were talking about issues like this with the 9600, and 9800 pro (not all in wonder). So there might be some bios settings that would help; though I have no knowledge of how such things work. B, is that the card is just a dud and I should just give it up and try to send it back in. I am afraid of option B mainly because I know it will take forever, and then I have no comp, and because of dreaded option C. The motherboard is simply incompatabile with the Radeon 9800 Pro All in Wonder 128mb version. Please let me know if anyone has had similiar problems, if I am up a creek, or how to set the bios... Here is my system specs; I will check back to see if I need to add anything. Thanks a bunch.
p4 2.6gigahertz
MSI 875P
1gig ram kingston hyper x
120gig western digital harddrive
21' Viewsonic
Radeon 9800 Pro All in Wonder 128mb
Sound Blaster Audigy 2 Platinum
Antec Performance Plus SOHO File Server Case ATX12V
(There doesn't seem to be anything in the Bios updates that will help me luckily, because I want to avoid flashing it if I can.)

Okay, I will try to answer any questions as they came. First off, Windows XP Professional is what I have. I tried to install the video drivers with both the inf update from intel, and the one from MSI installed. Again it crashes at login screen with any sort of inf update (ie agp drivers) installed. Radeon is running at 4x with fast writes disabled, however there is one interesting thing I learned Another thing to note about the problem is when I got to the ATI SMARTGART advanced settings little program (within the ati folder under program files) I can see that PCI write, and read are both on, and AGP read and write are both off. I am not a genius in relation to computers, but how could this card be acting as a PCI card, when it is installed in a AGP slot? Is this because since I don't have the inf update installed, so as far as the computer knows that agp slot is a PCI one? A further thing to note is that whenever I install the video card driver for my All in Wonder 9800 Pro, is that it installs two cards from what device manager shows. One is "ALL-IN-WONDER 9800 SERIES" the other is ALL-IN-WONDER 9800 SERIES - Secondary". According to device manager they are both located on PCI Bus 1, device 0. Disabling one or the other does not seem to make difference. A final thing to note is that I took an All in Wonder 9000 out of a friends comp and put it into my with the inf update installed; it booted windows and detected it fine. Does this mean my card is a dud and needs to be sent in for repairs, or is there some kind of voltage issue? As for other PCI cards, I have a modem that is not even installed at:
PCI Slot 2 (PCI bus 3, device 1, function 0)
Sound card at PCI Slot 3 (PCI bus 3, device 2, function 0)
Again Video Card (PCI bus 1, device 0, function 0)
The onboard Gigabit Ethernet is at (PCI bus 2, device 1, function 0)
Another thing that might help clue someone in is that I have
Standard Enhanced PCI to USB Host Controller
Listed 5 times; IRQ's are 23, 16, 19, 18, 16
The IRQ of my All-In-Wonder is also 16 if this means anything. No conflicts listed of course. Another note is that my onboard ethernet's irq is 18, same as one of the usb host controllers, and it works fine...
I can't think of anything else to add, let me know what you think. Thanks a ton so far guys.

MSI KT3 Ultra-ARU + All In Wonder Problem

I've got a odd problem that is related to putting my machine into Standby. If I do so the night before, then wake the system up in the morning I see issues that point to memory corruption or driver failure or a conflict with the VIA chipset. Outlook Express will lock up on launch, the ATI digital VCR app will either not launch or fail to shutdown if it does. I clean installed Windows XP, then updated it with XP SP1. Of note is that the video card works ok with the OS supplied driver but if you install the ATI drivers (which are needed to make the TV and Digital VCR work) this stuff happens. I have reinstalled several times so I am pretty sure this isn't just a messy config issue. I've had bad experiences similar to this with VIA chipset mobos in the past so this doesn't surprise me.
Anyone ever see this? Know of a fix?
-- Richard
Mobo: KT3 Ultra-ARU MS-6380E
CPU: Athlon XP 1800+
Video: All In Wonder Radeon
RAM: 512MB Samsung PC2100
HD: Seagate 80GB Barracuda IV
OS: Microsoft Windows XP Professional
Version: 5.1.2600 Service Pack 1 Build 2600
BIOS Version/Date: American Megatrends Inc. 07.00T, 4/2/2001
SMBIOS Version: 2.3

I don't know if this will help or not but....
I had issues with the latest drivers from ATI. I downloaded the tv capture drivers, display drivers, etc. in the 7.7 bundle. I went back to the 7.6 bundle and have had zero problems since.

No sound using ATI all in wonder Multimedia Cen

Similar Messages

Maybe you are looking for