No Sound, using Mute from Tool Box in MIDI

Hi Guys/Gals,
I was editing a MIDI track in the the Matrix editor last night. I had the mute tool selected from the tool box and was muting several notes. I was trying to work too quickly - because I must have hit something ... something global?
I couldn't hear anything at all from the track - even those notes which were not muted.
I took the track out of solo mode - and couldn't hear any of the other tracks either!
I've tried the usual suspects:
Audio/MIDI set up ... all fine.
System Preferences, Sound ... all fine.
Core Audio looked fine, disable and enabled to reboot core audio.
Nothing still.
Then closed session and rebooted session ... still no sound. Closed session, powered down, hard rebooted system ... re loaded session, still no sound.
Here's where it's even weirder. I closed and opened other sessions that were all running fine. No sound there either.
All the meters are lighting up fine ... Logic is crunching all of the audio ... I can see it.
Any thoughts or ideas on where to look?
Thanks.
Dee

Dhughes,
There are a couple of possible problems here. First, if you haven't already, try another set of headphones in the headphone jack just to eliminate the possibility of the problem being with the headphones.
The next thing to check is going to be the ribbon cable running from the card to the dri've. Make sure this cable is connected and is all the way down. Since the speakers are switching off, this is less likely to be the problem but it should be checked anyway.
If you are using a /4'' to /8'' adaptor, try another one just to eliminate that from the possibilities. Also check to make sure that the headphone volume knob is turned up and that when you turn the knob that the potentiometer is turning.
After all that you already have tried, if the headphones still aren't working after this then most likely you will need to get your platinum dri've repaired. To arrange this you will want to contact support. Their contact information is here:
http://us.creative.com/support/custsup
Jeremy

Similar Messages

Using functions from Combo Box 'Others:'

I am trying to use function DENSE_RANK in OWB 9.0.3.33.0. Unfortunately I can not find properly aropriate object form tool box palette. I tried to use JOIN, FILTER, EXPRESSION. Mostly I get error: PL/SQL: ORA-30483: window functions are not properly here.
I am trying to numerate my records in a set. In SQL I can write clause:
SELECT ID,DATE_VAL, OPERATE,
DENSE_RANK() OVER (PARTITION BY ID ORDER BY ID, DAT_VAL DESC) "MY_LEVEL"
FROM (
SELECT ID, DATE_FROM DATE_VAL, 'U' "OPERATE"
FROM SCH.P1
WHERE DATA_FROM = (SELECT MAX(DATA_FROM)
FROM SCH.P1)
UNION
SELECT ID, DATE_VAL,'I' "OPERATE"
FROM [email protected] )
ORDER BY ID,DATE_VAL DESC
Does anybody can tell me how properly I can to use DENSE_RANK() funcion in OWB and get "MY_LEVEL" pseudo column?
Thank very much for any advice.
Peter.
-Poland-

Thank You for replay.
I looked at documentation and I saw that DENSE_RANK is in the list aggregate functions. I mean You want to tell me that version of DENSE_RANK what I use is wrong but my question is about OWB.
In window "Expression Builder" You can use some of functions. If You add to mapping JOIN object in Expression Builder window You can write join condition. In combo box list called "Others", there is DENSE_RANK in the list. After You select this and paste to window OWB generate code like:
DENSE_RANK() OVER (
[PARTITION BY <value expression1> [, ...]]
ORDER BY <value expression2> [collate clause] ASC
[NULLS FIRST|NULLS LAST] [, ...] )
I am confused.
I still do not know what OWB object I can use to get "My level" pseudo column.
Regards
Peter

Using serial from product box, but serial number invalid after installation?

Ok, so. I have a copy of Photoshop 5, a physical copy, in the original box. I tried to install it on my computer, and actually did so successfully--it recognized the serial number from the box as correct and did a full install. However, when I actually opened Photoshop for the first time, a message came up saying that the serial number was invalid, and my options were to enter a new one or wait until next time, when I'd have to enter a new one for Photoshop to run.
I haven't closed it yet because I need it for work and don't want to risk it not running. Why would my definitely valid serial number not work? I double and triple checked what I typed in, and it initially accepted it, only rejecting it after installation.
I'm on Windows 7.

Welcome to the forum.
Did you purchase this copy of Ps 5 (Assume CS5, but please correct me, if it is the very old Ps version 5) from Adobe, or a 3rd party?
If from Adobe, log into Adobe.com with your Adobe ID and go to My Products. Verify the S/N there.
If from a 3rd party, it could well be that the S/N provided has been "used up."
Good luck,
Hunt

Crop Tool Disappeared from Tool Box

How can I resotre the Crop Tool Icon to the Tool Box? It suddenly disappeared but is still in the Enhance Menu

I would assume you're using PSE 10 or earlier. Just look for the recompose tool, since it shares the toolbox slot with the crop tool. Right-click it or click hold and you should see the crop tool.
In PSE 11, the crop tool is always the top left of the Modify section of the toolbox.

Dragging from tool box

I am working on a CS2 Mac OS X. When I go into the tools and drag a ellipse I was able to drag it the first time with no problem but after that when I try to repeat the dragging it would not allow me to do so . I have tried a new file and I have closed down the program. I do not release the mouse I do not see the object being dragged I have to release the mouse the click again which brings up my option box except the setting or in the case of ellipse I have to change the setting to make it an oval shape because the setting are set for a circle. I also try drag the polygon in an exercise that has us bring it to the art board and use the up and down arrow to choose the number of sides to make it a triangle but because I can not drag the object I cannot preform this task & the object I had put on the before move up and down on the artboard instead. Is there a magic solution. I went in to help & tried clicking on the tool longer, enable the Smart Guides & snap to point too. I feel I need to solve problem before I go on trying to learn the program . I had problems with the spiral. . So I think it will give me difficulties with other exercises I am doing that requires dragging only and not using the option button. Thank you for your time and help.

I think you miss understand how the tool works. Just click on the ellipse icon in the tool palette then click-and-drag anywhere in the document to draw an elipse. Or you can click once then type in the size of ellipse you want. To adjust the number of sides to a polygon, click the polygon tool, click and drag in the document and while the mouse is still down, type the up or down arrow to change the number of sides.

Run rcu.sh on linx thru remotely (from windows box using putty) for OIM11g

Hi All,
We have to run RCU 11.1.1.5 on linx box, remotely(using putty from windows box). Can we get GUI to complete the steps while executing "rcuHome/bin/rcu.sh" by connecting remotely.
Note: we dont have any Xwindows service is running on the linx box, and we dont have Graphic cards also.
If the GUI is not possible, Can we get CUI for this installation of rcu for oim 11g? Please suggest us. or do let me know, in case of any information.
Thanks in Advance!!!

Hi bagaria,
Thanks for your help on rcu using CLI. How ever, we want to install oim 11.1.1.5.0 and SOA 11.1.1.5 as part of upgradtion from oim 9.1 to oim 11g. Now we are going to install oim and SOA on linux x86 (64bit) box with CLI(GUI is not available here). I have gone through the link CLI for ofm(http://download.oracle.com/docs/cd/E14571_01/install.1111/b32474/silent_install.htm#BABJGBHJ), and we have below questions, can you please clearify us.
1. Can we use response file on linx, which was produced on windows OS?
I have gone thru the link (http://download.oracle.com/docs/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149) to execute below steps using CLI.
1. We have to upgrade oim9.1's oim schema by running "MW_HOME/Oracle_IDM1/bin/ua.sh" to upgrade oim schema.
2. We need to run the same ua.sh to upgrade Oracle Identity Manager Middle Tier, after configuration of oim 11g and soa.
Step 1 and 2, we have to run thru Command line Interface.There is info for step 2, but not for step1. can you please help me on step1.
How ever, for step2, I have gone thru the link (http://download.oracle.com/docs/cd/E21764_01/upgrade.1111/e10129/upgrade_oim.htm#CACDDEEE)
its GUI and here,(section 13.14 Task 12: Use Upgrade Assistant to Upgrade Oracle Identity Manager Middle Tier), we are providing the following
information
1. (step 7, in the doc) Specify OIM Database
2. (step 9, in the doc) Specify MDS Database
3. (step 13, in the doc)Specify WebLogic Server
For Command Line Interface, the link (http://download.oracle.com/docs/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm)
we are providing only "WebLogic Server" information.
ORACLE_HOME/bin/ua MT
-sourceHome SOURCE_ORACLE_HOME
-destInstanceHome ORACLE_INSTANCE
[-logLevel log_level]
[-[no]verbose]
[-[no]silent]
[-[no]retainPorts]
[-[no]stopComponents]
[-[no]startComponents]
[-wlsHost wls_host]
[-wlsPort wls_port]
[-wlsUserName wls_user]
[-invPtrLoc inventory_location]
Not providing any DB inforamtion, here.
Why are we not providing DB schema information to ua.sh when we run that using CLI? or Am I missing any thing?
Thanks.
Edited by: user13285646 on Aug 10, 2011 2:05 PM

Move from one text box to another w/o using tool box

I'm constantly needing to move from one editable text box to another editable text box -- or to a vector graphic and back to a text box. I'd love a keyboard shortcut to move around if there is one. Having to constantly click the cursor in the tool box to activate a text box is so tiresome.

Bearskate,
As I (mis)understand it, from other tools to the Type Tool, you can just press the T key.
Unfortunately, you cannot press the relevant other key with any kind of Type object selected because that will just add that letter somewhere.
You can see the keystrokes for the different tools when you hover over them.

I have a packardbell laptop with photoshop elements 8 installed from new. I have used it on several occasions but I cannot get it to run now. When I open a photo using elements the Adobe box pops up saying that the programme has unexpectedley quit? can a

I have a packardbell laptop with photoshop elements 8 installed from new. I have used it on several occasions but I cannot get it to run now. When I open a photo using elements the Adobe box pops up saying that the programme has unexpectedley quit? can anyone help me please as I have several photos to edit before the end of this month. Many thanks for any help

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

Default video sound is mute. But when i also can turn on from the volume bar.

I use FLVPlayback from CS 4 to input videos.
I need default sound is mute, but I can turn it on when I need it from volume bar.
Please see my attachement:
Here is the AS:
stop();
button1.addEventListener(MouseEvent.CLICK,clickListener1);
function clickListener1(event:MouseEvent):void {
gotoAndStop("30sec");
button2.addEventListener(MouseEvent.CLICK,clickListener2);
function clickListener2(event:MouseEvent):void {
gotoAndStop("30sec2");

Yes, I can change the volume from 100 to 0 at flvplayback component. If I do this, I can not turn on the sound anymore. The swf file will stay mute all the time.
I need an answer using AS3 to control player. It is more flexible.
video player default is mute. I can turn on the sound later from volume bar.
thanks
silky

Can't use the Zoom Tool to set the Magnification level of pages to diff sizes from the preset ones

Hi, I am trying to use the Zoom Tool and "Set Magnification" on my Dreamweaver CS5.5 in order to view my pages at different magnifications when working on them. My problem is that I need to use different sizes than those sizes that are available under the preset magnification levels list (which are for example 100%, 150% or 200%). These are the ones that come up on the zoom pop-up menu. The dreamweaver tutorial says that I need to type in the size I want (e.g. 115% or 130%) in the "zoom text box" and it will then apply that size to the page but the box does not let me change whatever size is currently in it. I can’t override or delete whatever preset size is in the box or do anything to change the zoom from the pre-set levels! I would really appreciate some help with this thanks

Hi Ben, thank you for the reply, unfortunately that was one of the pages I was looking at to try and fix this issue but it is of no help.
The page says for zooming in and out of a page to "Type a magnification level in the Zoom text box.". My dreamweaver will not let my type a manficiation level in the zoom text box. It just won't let me override whatever is in the box (e.g. 100%) so I can't change it from the default pre-set magnification levels. It is so frustrating!
Does anyone else have any other ideas?
Thanks
Rachel

No sound using headphones: mute opti

Sound Blaster Audigy 2 ZS
When I use headphones there is no sound from them, when I use them the sound stops coming from the speakers, if I unplug them the speakers are OK again, I hear sound.
I know this is a feature that mutes the speakers when headphones are plugged in I saw it the first time I installed the driver and software, I've since reinstalled Windows, just yesterday. I can find the program, Creative AudioHQ, for options that lets me choose whether to mute or not mute the speakers when headphones are plugged in but it doesn't help with my situation. Unless there is something I am missing.
The only way to correct this is I suppose is to use System Restore and go back past where I installed the sound card driver.
Any help would be appreciated.

Dhughes,
There are a couple of possible problems here. First, if you haven't already, try another set of headphones in the headphone jack just to eliminate the possibility of the problem being with the headphones.
The next thing to check is going to be the ribbon cable running from the card to the dri've. Make sure this cable is connected and is all the way down. Since the speakers are switching off, this is less likely to be the problem but it should be checked anyway.
If you are using a /4'' to /8'' adaptor, try another one just to eliminate that from the possibilities. Also check to make sure that the headphone volume knob is turned up and that when you turn the knob that the potentiometer is turning.
After all that you already have tried, if the headphones still aren't working after this then most likely you will need to get your platinum dri've repaired. To arrange this you will want to contact support. Their contact information is here:
http://us.creative.com/support/custsup
Jeremy

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

http://support.apple.com/kb/TS2005
http://support.apple.com/kb/HT1861
https://ssl.apple.com/support/proapps/serialnumbers/

When I call someone using FaceTime from my mac, they can see me but no hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro

When I call someone using FaceTime from my mac, they can see me but not hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro and isight camera, mike combo.
If I use google it works. If I use Ichat, it works. If I use skype it works.

This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
Try turning down the speak volume (System Preferences->Sound->Output->Output Volume) or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call.

Is there any way to export IT Resource data from OIM using the export tool?

Hello,
we are trying to migrate an OIM development environment to a preproduction environment and we need to migrate more than 400 IT Resources. We have exported some IT Resources and when we imported them in the preproduction environment their data was not migrated. Is there any way to export IT Resource data from OIM using the export tool? Or is there any other way to do this without doing it by hand?
Thank you for your help
Kind Regards

Well , OIM doesnot provide any such facility to export ITResource data along with ITResource .
Directly updating the DB could be an option ..
Thanks

When using the lasso tools, how do i disengage from it, in order to adjust it?

When i am in the process of creating a selection, with the lasso tools, I would like to disengage from the tool, briefly to adjust my selection and then to return and continue to make the selection. If i press the space bar, it does disengage; but the hand tool becomes active at the same time. If i click on the options with the tool, to either add or subtract from the selection, as i drag the mouse to do this, i cause the tool to continue to outline, when i would like it to stop. It seems to remind me of when i used to use an old etcher sketcher magnetic drawing toy, from the late 1970's. ( if you are old enough to know what i mean that is)! Does anyone have a solution to this problem.

The magnetic lasso tool is very useful and is suited admirably for selecting tiles or shingles. It is important to set up the tool for the task at hand. In the tool's option bar I start out with Feather=1px, check anti alias, Width=2px, Contrast=3%.
If things don't go well, the first change that I make is to the contrast setting and give it another try. One can back-track by hitting delete on the keyboard, left click to lay down one or more anchor points, then go on to circumnavigate the area to be selected.
Now, after having made a complex selection, going to Layer>new>layer via copy puts the selection on its own layer, with surrounding transparency (checker-board pattern). One can use the eraser tool to tidy up, if required.
I offer this as my workflow. Not infrequently there are several ways to do things in this program.

No Sound, using Mute from Tool Box in MIDI

Similar Messages

Maybe you are looking for