No sound using Realtek AC 97 and C-Media devices

I can't figure out why all of the sudden my sound is not working.  I'm running XP Pro with the following sound devices:
Name : Realtek AC'97 Audio
Name : CMI8738/C3DX PCI Audio Device
Name : Unimodem Half-Duplex Audio Device
I've got the latest AMI BIOS, audio, XP, etc. drivers and still nothing.   Any suggestions?  
Thanks.

Hi,
look this : http://support.microsoft.com/default.aspx?scid=kb;en-us;833846&Product=winxp
Maybe it helps you.
regards, lightrider

Similar Messages

  • Can I use my gift card and two differents device ?

    Can I use my gift card and two differents device ?

    Yes, you may use both.
    Dan K. | Mobile Specialty Stores
    Any opinions expressed in this post are those of
    the author and do not represent Best Buy Co., Inc.

  • Can you record sound using a USB 6211 and convert the data to a .wav (or other sound) file?

    Hello,
    I am trying to build a system that will use a USB 6211 to record sounds from multiple electret microphones and then save the data as a .wav file or other sound file.  I have already built my mics and hooked the mics up to the USB 6211; the DAQ device seems to do an adequate job recording the signal - I've recorded from 3 mics at a time at 11,025 Hz, although I don't know how good the signals are since I can't save them for playback after the fact, and they aren't going through my sound card. Ultimately, I would like to save the data as a multichannel audio file which I could then open in a program such as Audacity for further editing and analysis. Since Audacity can import a variety of sound files, my file format doesn't need to be .wav if another format would work better.
    Any advice would be appreciated.
    Thanks, Eric

    If you are sampling all three simultaneously, your highest frequency recordable will be (11,025/2)/3, so about 1800Hz and that will pretty coarse (traditionally digital sound recording is at 44Ks/s at the low end). As to converting to a .wav, there are functions on the "Graphics and Sound" palette for saving waveforms to a .wav file.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Trouble using form on Android and/or iOS devices

    Form was created in LiveCycle. Cannot access form at all on android or iOS device using Adobe Reader. Get message "If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document." I downloaded Adobe reader 11.0.1 to iPad and android looks like it may be 10.6.1.

    Not sure which version of LiveCycle you are using, but above links talks about the rendering of XFA forms in HTML5 (introduced with LiveCycle ES4).
    Another helpful link - http://helpx.adobe.com/livecycle/help/experience-mobile-forms-capabilities.html
    ~ Varun

  • It is impossible to use 10.4, Safari and Windows Media Player

    it is impossible to use safari to access a site with streaming video without having your mac freeze, i found the only combo i use to freeze everytime, first i install windows media 9, then i go to myspace.com using the safari browser, then i acess a page of someone who has a streaming video file such as a music file, then my safari locks up and freezes. This happens every, single, time. I know its not a fluke and i know i didnt do anything wrong and i enjoy myspace so there is no way that i can have media player and it ****** me off so i want to know if there are any alternatives or if my mac is just a piece of crap and messed up. without the media player i have to deal with a pop up everytime i access someones page telling me to download media player even though it doesnt work so thats kinda hilarious. k someone help me out

    I know nothing about all this stuff but for kicks I went to the site you said and when I play a normal music file it works fine in safari. It does load slowley. When I tried to view a music video it says you have to have "windows media 9" and you must use "internet explorer". Have you tried using your internet explorer in your applications folder instead of safari? I still could not get the videos to work but I have had this problem befor. Sometimes if you keep messing with the settings in the network tab of the media player it eventually works. But the site itself looks like they have a little ways to go and just might not be ready for mac yet. If you don't get this fixed I can try the site on my pc at work tomorrow and see if that works, unless you have already tried this. But bottom line with safari is its not compatable. At least what their site states.

  • Sattelite C55-A Horrific sound inside RealTek HD audio

    For a long time my sound was perfect, I also use something called Razer Sorround to Enhance my sound quality and it sounds absolutely awesome!
    My Laptop
    I had to do a factory reset on my computer for some reasons (A lot of junk files i just didnt want to delete)
    ever since i did that, I went to listen to sound (using RealTek HD audio instead of the virtual Razer Sorround Audio card) and it sounds horrible!! There is no bass, its all treble, and sounds disgusting! its currently set to 24Bit, 192000Hz and it sounds horrible! If i user Razer Sorround it sounds a bit better, but i can still tell on some songs it just gets distorted.
    Thank you in the long run.
    Again, if you didnt see before...
    I have a Sattelite C55-A Laptop. 
    I have tested the sound with and without headphones, My headphones are great studio quality aswell. (well i mean they sound amazing, they werent cheap either) Thank you a lot.
    A quick edit; 
    The only drivers i have ever installed was a BIOS one and AMD one. I  believe the amd was for the cpu/ integrated gpu

    I have a C55-A5392
    The sound only only sounds terrible and has a weird bass stutter when i select RealTek HD, currently im using an virtual sound card, but it does use up quite a bit of CPU, would be great if i could fix this

  • Cannot eject ultrabay harddisk in "Safely Remove Hardware and Eject media"

    Just installed my T430s with Win7 x64.
    But I have a problem with ejecting my ultrabay harddisk using "Safely Remove Hardware and Eject media" icon.
    I installed the lastest Intel Rapid storage driver (RST) ver. 12.8.10.1005 from Lenovo download.
    Ultrabay harddisk not in the list using Lenovo RST driver!
    If I use the native Win7 driver (Standard AHCI 1.0 Serial ATA Controller) it works:
    Works fine using native driver.
    I assume the Intel RST driver might have some improvement to the native driver.....so I would frefer using that.
    This is how it looks like in the Device Manager:
    Intel RST driver:
    Win7 x64 native driver:
    Any suggestions......does anyone have a newer RST driver?
    Tried to find one at Intel without luck :-(
    Solved!
    Go to Solution.

    MrCalvin wrote:
    ..already tried it, it doesn't have the series 7 driver :-(
    That's odd.  From the readme:
    Intel(R) Rapid Storage Technology Release is designed to provide
    functionality for the following Storage Controllers:
    - Intel(R) 9 Series Chipset Family SATA AHCI/RAID Controller
    - Intel(R) 8 Series/C220 Series Chipset Family SATA AHCI/RAID Controller
    - Intel(R) 7 Series/C216 Series Chipset Family SATA AHCI/RAID Controller
    - Intel(R) C600 Series Chipset SATA AHCI Controller
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

      I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • I purchased the 5s yesterday and wanted to dock the phone into my Bose Sound Dock that I use for my IPOD and used for my previous Apple smart phone.  What steps do I need to take to use the feature of Pandora on this IPOD dock

    I purchased a Apple 5s yesterday replacing my two year old Apple 3G.  With my old phone I used it to dock into a Bose Sound Dock to listen to Pandora and other music outlets.  The Bose dock also is used to play my IPOD.  What steps do I need to take to use my new phone on this dock to continue playing Pandora

    This is the only thing I could find but it does not answer my question or even what I was told by the Global Support Rep.
    Verizon has confirmed (here and here) they WILL unlock the SIM on the iPhone 4S, allowing for use of local SIM cards while traveling abroad (no word yet on whether this will allow for use on AT&T and T-Mobile.) This is different than the jailbreak unlocking method; SIM unlocking through Verizon is permanent and will not affect your warranty in any way.
    1. Meet the following requirements:
    * Must be a Verizon Wireless customer.
    * The iPhone 4S being unlocked must be active on a Verizon Wireless line of service.
    * The line of service must be active at least 60 days.
    * The line of service must be in good standing for the past 60 days.
    * Only one SIM Unlock per line every 10 months.
    If you don't meet one or more of the above requirements, call anyway. You may still get lucky.
    2. Insert a foreign SIM into the SIM card slot on the side of your phone (only required to confirm that the unlock is successful.)
    3. Call 1-800-711-8300 (Verizon Global Support) and ask the representative for a SIM unlock. Occassionally a representative may not know exactly what you are referring to; make sure you are not transferred to a different department. You are in the right place. Explain that they should have a walkthrough on how to do this, and that it allows for the use of local, non-Verizon SIM cards while traveling abroad.
    4. Get confirmation from the rep that the unlock has been applied to your account, then check your phone to make sure it recognizes your SIM and can connect (if successful it will roam on AT&T, assuming you are calling from the USA.) You will NOT see an unlock confirmation in iTunes as that is for a factory-applied unlock only.
    5. Enjoy your new unlocked iPhone 4S!

  • My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen

    My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
    I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
    Reset SMC  no change

    Run the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.

  • Using Mountain Lion iOS and audio output will not change from internal speakers to AppleTV so that sound can come from TV speakers, why??

    I am using Mountain Lion iOS and trying to connect my MacBook Pro to my plasma TV using AppleTV and AirPlay mirroring.     The video does just fine.     However, there is no audio coming from the TV.     After activating AirPlay I try to select Apple TV as the audio output in System Preferences and it highlights it but then immediately goes back to Internal Speakers and only has sound coming from the MacBook Pro..
    What's going wrong ?????
    AJ

    Are you sure that WIFI network doesn't have an AppleTV on it?  Just because you don't own it doesn't mean there isn't one on that network.  The laptop or better said the OS cannot differentiate between an AppleTV that you own or not.  If it sees one on the network, it will show you one as being available.  The automatic reconnection is happening probably because the last time you streamed to an AppleTV, you didn't drop that connection before sleeping the computer or shutting down iTunes.

  • DTS & 5.1 Surround Sound using my Home AV Receiver and X

    Hello, new to the boards and computers (buying @ least). Let me start with my Desktop, followed by the sound card and my home AV Recei'ver. BTW, all drivers are current and up to date.
    HP m820n
    Processor
    Intel Viiv Processor Intel Core2 Quad Processor Q6600 (2.4GHz)
    Operating system
    Genuine Windows Vista Home Premium
    Creative Sound Blaster X-Fi Platinum Fatalty w/ I/O Dri've
    AV RECEIVER
    Yamaha HTR-5730 5. w/ DTS and Dobly Pro Logic II.
    Connection between the two:
    Digital Coax Cable from X-Fi I/O SPDIF Out to AV Reciever CD Coax Digital Input.
    At first there wasn't any sounds coming from my receiver using the current connection (see above). However, I was able to change an input to digital PCM (pulse code modulation) on my AV Recei'ver and all of the sudden, I'm listening to mp3 & wma files in surround sound (all 6 speakers).
    I thought that the problem was solved. Well then today I discovered it changed to stereo only, and as long as the digital input cable was hooked in back of the receiver, I couldn't change the setting from "stereo, PCM" to DSP, DTS or DoblyII. Solution? buy the Home Theater cable set or external decoder.
    Next Problem, for some reason when I change the X-Fi settings to 5. ( or 2.0) and set up a "test" (whether creat.labs or Window's Media Center)there's no sound coming from any channel/speakers. HOWEVER, my AV Recei'ver will even change the setting from "Stereo" to "5." on the test automatically....but still, there's no sound??
    So.... I ignored it and figured to grab my Led Zeppelin Double Disc DVD that's Dobly Digital and DTS 5. Sorround sound. After messing w/ the default & SPDIF by-pass settings and inserting the DVD, I can only listen to it in Stereo (left and right PCM). BTW, changed audio selection in menu on DVD too.
    What gives? What's digital even good for on these things since the only solutions are to ether decode or switch to analog. Also, sorry that this is so long and possibly parts don't make sense but I'm extremely tired (2:45 am Central).
    Thanks,
    Chris

    To the Top...
    Also, an update. Using my TV Tuner card, I was able to watch tonights football game in HD which is Dobly 5. Surround sound. Sure enough, the AV Recei'ver kicked into Dobly Digital right away. Now I just need to figure out how to configure DTS and Dobly using my DVD's and possibly buying software that converts music files into surround sound.
    Chris

  • Since yesterday I have been unable to use FaceTime across all my Apple devices: Iphone 5s, MAC Notebook, and Ipad Mini.  It does not connect nor make the ringing sound. Why is this and how can it be fixed?

    since yesterday I have been unable to use FaceTime across all my Apple devices: Iphone 5s, MAC Notebook, and Ipad Mini.  It does not connect nor make the ringing sound. Why is this and how can it be fixed?

    I am haveing same problem canot find itunes.msi

  • I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

    I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

    Hi nitramred,
    To start troubleshooting this issue where you are unable to adjust the volume after receiving a call, please go ahead and first force close all of the apps currently running on the device, and then reset it by following the steps in the articles below.
    iOS: Force an app to close
    Turn your iOS device off and on (restart) and reset
    Take care,
    Alex H.

  • I am getting a lot of static when using Brookstone wireless headphones and watching movies on the Apple TV. I know it is not headphones, because they work fine when I switch it to cable TV, then the sound is clear with no static. Any suggestions?

    I am getting a lot of static when using Brookstone wireless headphones and watching movies on the Apple TV. I know it is not headphones, because they work fine when I switch it to cable TV, then the sound is clear with no static. Any suggestions? Which wireless headphones work best with the apple TV?

    Ok so I've been doing more testing. It's all videos on the iTunes store. Anytime I try to download a podcast or stream it or anything it's super slow. To download an episode of Diggnation it tells me over 2 hours to download but the time keeps climbing and I just stop the transfer.
    Some people said it's an Open DNS thing? Maybe it is but it's not computer specific and I couldn't find a way to change the DNS settings in my Airport, only on each computer. I tried deleting PLists and restoring my Apple TV and restoring my Airport and nothing is working.
    I don't know if it an issue with me, my ISP or Apple. Anyone else experiencing this problem?

Maybe you are looking for