No sound using stereo mixer with speaker balance s...

No sound using stereo mixer with speaker balance set between approx 95-100% of max to the right
Setup: good quality functional soundcard, fine when audio not routed via Skype, mixer enabled, Skype mic / audio auto disabled, issue present when tested using a variety of different systems, latest version of Skype was used on all machines being tested
Issue: When the speaker balance is set approx 95% to 100% to the right speaker channel using the Windows audio control no sound is generated. The issue is absent when audio is not routed via Skype. This would seem to be a Skype bug and would like to report the issue as a bug. Has anyone else encoutered this issue? Is there a resolution?

Yes, I restarted my computer yesterday and this morning all my sounds is controlled by the left/right blance percentage.

Similar Messages

I have a hp hpe-595a, i'm trying to use stereo mix with a hot mic. anyone know how to do this?

I'm trying to sing along with the music in the chat program Paltalk and also host a music room on the same program, I can only use the mic or stereo mix but not both at the same time.
I have been using this chat program for over 5yrs and have always been able to use Stereo mix with the mic active, using the realteck codecs or soundblaster (what you hear)
I can't do this with the IDT codecs supplied.

Hey Redritr,
Thanks for the question. iTunes purchases are billed to Store Credits first, before Credit Cards, as outlined by the following article:
When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance.
via iTunes Store: How iTunes Store purchases are billed
http://support.apple.com/kb/HT5582
It also may be that the iTunes Store is prompting to verify your billing information:
When there is a mismatch between the iTunes Store's records and your credit card company's records, you will receive an error message stating that your credit card's security code isn't valid or that your zip code does not match your bank's records.
In most cases, this issue is caused by a formatting error in the billing address that you have provided. You can correct the issue by verifying that the information you have provided is correct, or by changing the format of your address to match the format that your credit card company has on file.
via iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/TS1646
Additional Information:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
Thanks,
Matt M.

I am unable to get sound using apogee jam with my guitar. I can see input levels but no sound. What step am I missing?

I am unable to get any sound using apogee jam with my guitar in logic pro 9. I am using Macbook pro.

status...
DWdrummerBeam
Jun 4, 2012 3:24 PM
I think I have done something wrong. I used my Apogee Jam on a guitar project with several audio tracks in Logic Pro 9. And while the Apogee Jam still was connected, I switched to another project with only instrument tracks (synths). I forgot to change the "Built In Input". After I did this, my guitar sounds like crap when I try to use Apogee Jam in the same guitar project, or also if I create a new project. I use Guitar Rig 5 (Native Instruments) as my guitar plug-in. But the guitar sounds strange even if I don´t assign Guitar Rig.
Can somebody help me?

Trying to record Stereo Mix with a monitor through my headphones. Using Screenium to record Audio and Video, using Avid MBox Mini with MXL 909 Microphone for the audio through the interface.

Basically, what I am trying to do is this:
Record my screen through Screeenium, record my voice as audio through an Avid MBox Mini (interface) with a MXL 909 microphone to pick up the audio. I have all that figured out. I'm able to efficiently record my audio and screenplay through these instruments and programs. What I am having trouble with is the stereo mix. I am running into a slew of problems here... My goal: Add on the audio of a game that I am playing (for example, Amneisia) so that the audio for my game will be picked up internally, and not through the speakers to be recorded through the microphone. I want there to be no external sound except me talking into my microphone. I also want to be able to HEAR the audio of the game through my headphones (and if possible, myself as well, through a monitor maybe?)
Problems I have run into so far:
-Haven't gotten it to pick up in game audio at all while using headphone. Can't figure this out
-Downloaded soundflower, have the output as soundflower. Not picking up anything, will put all my sound and midi settings at the end.
-When I do record through my microphone, it is only picking up a single channel (left earpiece only, no right channel)
-I have figured out it is NOT the equipment, I use Pro Tools and am able to pick up both channels with my mic, recorded a few tests. It's settings and I can't figure it out
-Trying not to run 16 million programs while running the game, will cause lag.
Summed up:
Trying to record:
-Audio from gameplay of any game I am playing through alternative route of speakers (do NOT want to record game audio through speakers, internally)
-Record voice through Avid MBox Mini and MXL 909 microphone.
-Record screen gameplay through Screenium
I followed a guide that told me to achieve "stereo mix'' I need to download soundflower and follow "X" steps. That is done and these are my current settings:
Audio Midi Setup - Stereo Mix custom Aggregate Device, Soundflower (2ch) selected, Avid Mbox Mini selected, Soundflower Output #1 has 2 channels (1-2), using Avid MBox mini for "Input" in order to record. Using Soundflower AND Avid MBox mini as "Output" in order to hear the sounds and replay game sounds (could be the problem? Maybe?)
Sound Settings - Output Stereo Mix (custom channel) Input Avid MBox Mini (recording)
I'm hoping this isn't too hard to understand.. I'm VERY bad at explaining information regarding computers.. It's hard becuase I don't understand it. I can clarify anything that I am able to, so any help on finding certain things would be greatly appreciated.
My computer: Macbook Pro MAC OS X Lion (11G63) 10.7.5 2.4 GHz Intel Core i7 4GB 13333 MGz DDR3 (If any of this is imporant)

Hey guys,
I tried to do some research and it looks like you need to have an external device and its drivers, such as an external microphone, installed on the computer to record audio that can be saved as a sound file. Another Suggestion is to try an auxiliary spliter for your headphones and external speakers?
What software are you using to record your game?
If anyone knows anything different, please let me know.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

Audio output low using stereo mix under recording HP Pavilion Dv6 Win Prof Prod# A3E82AV

HP Pavilion Dv6 Win Prof Prod# A3E82AV with High Def Audio Codec
When I bought this I asked if it had "What you hear" under recording and was told it had "Stereo Mix" instead and it would do the same. I accepted that as my Gateway has this as well and it works great. However, using the same settings as for the Gateway and using either Audacity (Latest Version) or DAK7 Wav Editor it's like I can't get the recording signal high enough. Sound barely register on the wave chart with the recording level as high as I can get it both in the programs as well as under the Stereo Mix Property. Playing back what I record require the volume to be at max and the quality is very bad. Am I missing something?

I have had the same problem ever since I bought my laptop with "beats audio". In my former PC this worked perfectly with Realtek HD Audio. Someone please help!

No stereo mix with Satellite T110

I bought a Satellite T110 (Win7). There's no Stereo Mix option with the recording devices. I marked show disabled and disconnected devices. I updated the conexant driver (4.98.16.61). Nothing helped. Still no stereo mix option. I tried connecting a male-male cord from headphones to line in - gave very bad quality.
please help!
Message was edited by: lelbd

As far as I know the chip does not include this and there is no way to upgrade this
PS: this has nothing to do how much the notebook cost there are many different notebooks on the market which costs a lot of money and dont support some features due to the different chip.... and there are a lot of notebooks you could get for favourable price and support Realtek sound chip.

Replacing stereo mix with original mono tracks in edited program

Hi there,
I've edited a 2 minute program with the stereo mixdown of 6 lapel mics on 6 different speakers. I'm now finishing the project and am wanting to isolate each speaker's audio, but can't seem to figure out how to do this. Using the Replace edit function loses my ins and outs.
Please help!
Thanks in advance.
Pete

You may enjoy the new Source ch mapping in CS3.
IF you clip is stereo with one voice in the lft and another voice in the right ch, BEFORE importing it change you preferences thusly:
Edit > Preferences > Audio Set Source CH mapping to Mono.
Import your clip.
Drag it to the timeline and you will see it will be two linked mono tracks.
That is a global method.
To do an individual audio clip:
Import it and before you put it on the timeline; select it in the bin and choose Clip > Audio Options > Source Ch Mapping and set it to Mono. This will accomplish the same thing, except for a single clip.
Re your 2nd question; If you do the above you can use the audio mixer to mix the voices.
I often shoot with a wireless in 1 ch and a shotgun in the other. So these options are quite handy.
Curt

No Sound Using Audigy 2 With Vi

Hi all.. I know there's probably tons of these dumb questions about cards not working with vista but I'm stuck. I've searched the forums and haven't found anything obvious that fixes the problem. Anyways, I just upgraded my XP machine to Vista and everything works fine but the sound. I've made sure I have the 32-bit vista drivers and everything looks alright in the device manager, but I just don't get any sound. I just have a two speaker setup, so they're attached to the black jack of the card and I just get this kind of dull low hum. When I plug into the digital jack, I get lots of white noise but if I turn the speakers up all the way I can barely make out proper audio, though it is distorted. If anyone else has had this problem or has any ideas, they'd be welcome. The computer is a Dell Dimension 8300... I'm not sure what the motherboard is. Thanks!

You can download the iso for the Creative installation cd for the Audigy 2 ZS from here. Use Winrar to extract it and then burn it to a CD. Then use it to install the Creative software. Installing the Creative software might fix the problem. If not, there is a diagnostic utility on there. Run that and see what it says.

Anyone using Liquid mix with Logic?

Trying to get some feedback on liquid mix.
any thoughts greatly appreciated.
B

I was testing it for a few days and it worked REALLY well for me. Considering I do have mLan Audio/Midi network which uses firewire I was expecteing only crashes but than was quite impressed-no crash at all! I made myself a few quick comparsions of Avalon vt747 comp/EQ and some Focusrite stuff I own and it´s LiquidMix emulations and -ofcourse - the emulations weren´t exactly the same , in case of vt747sp EQ low shelf the difference was actually "hearable" and I liked the sound comming from hardware much more - but still I´d buy it - it does things pretty damned good - and I never expect plugins to be EXACTLY what hardware is. I am only waiting for apple to sort their OS firewire driver (as my mLan devices audio streaming rely on this driver which is buggy now), and after that I´d probably buy it.
I did not hear Duende yet but it is totally different animal-as it is not emulation of Analogue stuff but as far as I know it uses the algorythms from some SSL digital console. Liquid mix emulates mostly analog devices , though I remember it probably does have some Weiss digital stuff too (not sure - and don´t say to Bob Katz that you have "liquid Weiss" :)))
So I think: for the money the LiquidMix is GREAT value COMPARED to plugin bundles that are using native CPU. Do not expect that you´ll get exact sound of a Fairchild, Neve etc. BUT you´ll get very good starting points for tweaking. And you can tweak A LOT with this toy. Specially when it has real knobs

Using a CC with a Balance Transfer without added interest cost

I have several cards on 0% or low APR BT Offers, and those CC have also made me offers for cash back if I use the card for purchases. How can you do this, if the card is already on a BT, without destroying the low APR on the BT? Easy. An important thing to understand about your credit card statement is that your statement balance can have multiple APR on several different portions of the balance. In this Bank of America example, I’ve got two separate 0% APR with different expiration dates, balance transfers left over from earlier at the purchase APR, and purchases at the standard purchase APR. The amounts shown are not the ending balance, but rather the average balance during the credit card statement period. (even this average balance isn’t exactly what the interest is charged on, because CC interest is charged on a daily percentage, resulting in daily compounding)Before Congress passed the CARD Act, most CC agreements would apply ALL payments to the lowest APR first, meaning in the above example the ~$8k on the two 0% APR would be paid first, all $8k, before even beginning to pay on the ~$500 at the purchase APR. This is a favorable purchase APR, but imagine if the purchase APR was at 19%? To make matters worse, the interest on the purchase APR items would usually add to the Purchase balance, and continue to compound the interest cost on the purchases until all the lower APR items were paid off however many months that took. Needless to say, in the old days it was not a good idea to use your credit card for regular purchases if you had a BT on the card. That all changed with the CARD Act a few years ago. Since the credit reforms of the CARD Act, credit card issuers are allowed to apply the minimum payment to the lowest APR items first. However, after the minimum payment, they must apply payments to the highest APR items. The minimum payment depends on statement balance, but is often only 1% to 2% of that statement balance. In the example above, the statement balance of almost $8k required a minimum payment of only $82. This would be applied to the approximately $8k 0% APR balance first. Any additional payments above the $82 for the month would be applied to the highest APR items next. Actual interest charges usually fall into the higher APR buckets. On the BofA cards, I get little offers for 10% cash back from certain national merchants. HairMasters, Starbucks, Buffalo Wild Wings, Papa Murphy’s, and several others are regularly available to add the offer to the card, use it at the merchant for one purchase, and get 10% cash back. With my Citi Diamond Preferred, I also had a $600 BT offer on the $1k CL, then got a 5% back on $500 of purchases in gas, groceries, restaurants and department stores. My Discover card had several thousand on a 0% BT, then they sent me a “spend $1,000, get $100 back” offer. My US Bank Cash+ has a low APR BT offer, and 5% categories for Department stores. How do you take advantage of the spend offers and not get interest charges? You usually have to accept / sign up for the spend offer, to add it to the card, so do that first. When you use the card for any of the offers, depending on the spend involved in the offer, just keep track of those as they post to your CC account online during the month. You have to wait until the charge amount actually posts to your credit card account, so it is no longer Pending. After it posts, it will be in the “Purchases” bucket of the daily interest charge calculations. Said differently, you cannot prepay these charges, you have to wait for the amounts to show up as Posted on your account online. It only takes a few days after you did the purchase, and you don’t have to wait until the statement cuts to see the amounts, but they do have to post to your account. After a few charges have posted, use the Make a Payment button on your credit card account to arrange an electronic payment from your checking account, to post the same day or in a few days. If you know when charges will hit, you can also schedule such a payment for a few days after, to allow time for the charges to post. Repeat this throughout the month if the spend offer is a long term thing. The amount of the payment you make must cover the Minimum Payment first. I’ll often just send over the minimum payment right after the statement prints, just to get it out of the way. I owe the amount, the BT needs to be paid off, and the Minimum Payment is a small amount anyway. I’ve also got Autopayments set up for all these accounts, which is intended to pay the BT offer over a schedule. I don’t use the Autopayment amount in my calculations of paying the purchase amount, although they would be applied to the purchase amounts. By paying the purchase soon after it posts, and after the minimum payment has been made, the interest rate clock never really gets started on the purchase amount. You may see a minimum interest charge of $0.50 if the card charges that, but often I don’t even get that amount if the payment is soon enough after the charge was posted. Chase Slate and Freedom cards are actually even easier. You can use the Blueprint Full Pay payment selector features to tell Slate the types of charges you want to include as pay in full, and they will add those new charges to your Blueprint payment to pay them above the minimum payment that is going toward the BT payment, and not accrue any additional Purchase interest. The Finish It allows you to set an additional amount you want to pay toward the BT (or purchase charges) principal over the minimum payment, to make the payments faster. So, the point of this is, if you have a BT offer on a card, you don’t have to effectively SD the card, it can be used for purchases to take advantage of special offers, or even for regular charges, without added interest cost.

tjhallow wrote:
But since I don't have any interest on balance transfers and purchases on my discover card right now I usually just make whatever I was making (before the charge) and then I add the new charges in there.If you're 0% on BT's and purchases then this thread really isn't relevant. This is for those that have 0% on BT and >0% on purchases. kdm31091 wrote:
Basically, all this is saying, unless I am missing something, is that if you make purchases and pay them off before statement (i.e. don't carry the extra balance on top of the BT amount) you won't pay interest, which is the case with any CC, whether on a BT or not. I don't see how the rewards offers make any difference here. You're just paying charges as you go to avoid interest accruing.It is basically the same whether there's a 0% offer or not. The OP started this thread to clarify for those that do have a 0% BT offer and still want to take advantage of rewards on the same card without impacting rewards by acrruing interest on new purchases. If the card has no rewards as an incentive for new purchases then it's easy enough just to SD the card until the 0% offer balance is paid off. my-own-fico wrote:
I'm not sure whether to agree, because if you pay the minimum following the statement date and then charge something that you soon pay off, we are talking about two different billing cycles. The billing cycles really don't matter aside from generating a new minimum payment as each cycle closes out. Regardless of cycle the minimum has to be covered first and then new purchases within the given cycle need to be paid off as quickly as possible. The minimum applies to the prior cycle. Additional payment(s) need to be made for purchases in the current cycle.

Problem to use SAPServer Class with load balancing

Hello,
We use the SAPServer Class from SAP .Net Connector 1.0.
On our system, we want to start the RFC Server to use the logon group.
I didn't find how to use ServerMessage and LogonGroup with one of constructors.
When we start the SAPServer with the command line -aUSER -gBEAUSR201 -xsapgw10 from the DB server (BEAUSR201) it's Ok,
but when we start from one of our application Server (for example -aUSER -gBEAUSR213 -xsapgw13 ) it's KO
we have this message on the trc file.
ERROR file opened at 20041125 084739 Paris, Madrid, SAP-REL 620,0,1622 RFC-VER 3 683864 MT-SL
T:13188 ======> Connect to SAP gateway failed
Connect_PM TPNAME=USER, GWHOST=BEAUSR214, GWSERV=3314
LOCATION    CPIC (TCP/IP) on local host
ERROR       hostname 'BEAUSR214' unknown
TIME        Thu Nov 25 08:47:39 2004
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -2
MODULE      ninti.c
LINE        385
DETAIL      NiPHostToAddr
SYSTEM CALL gethostbyname
COUNTER     1
What is the solution ?
Thanks

Hi,
The message server and Logon group are there for balancing the load among application servers within a SAP system. You are using the SAPServer class to implement an external RFC server that usually serves the request from SAP servers. So using message server and logon group with an external server doesn't make sense.
I understand that both your DB server and the application server in question are Windows machine with .NET runtime installed and you started the SAPServer programs directly from Windows command line. If so, the error message for the KO case says that the hostname BEAUSR214 could not be resolved from the application server. I also noticed that the hostname BEAUSR214 in error message doesn't match the hostname BEAUSR213 given in command line.
Can you ping BEAUSR213 or BEAUSR214 from the application server in concern?
Regards,
Guangwei Li

No sound using headphones only with FC Express

I've searched and read lots of threads on sound problems with USB headsets and 10.4.x but as yet have found no solution.
First I should point out that ALL software including the OS environment works OK with the headset, even if sometimes I have to go to prefs/audio and select and deselect the mute button to get them working. However, with Final Cut Express even this doesn't work.
I hear sound through the external/internal speakers with or without the headphones (USB) plugged in. I have tried front and rear USB sockets and on the keyboard which is where they normally work with everything else.
I am merely trying to play clips from the timeline, but would prefer to use headphones and not the internal speakers.
Final Cut Express HD 3.5 - My settings under view/video output is set to Canvas Playback.
Buying another set with audio jack is not an option that I like. These work fine for everything else so why not with FCE?
Is there anything else I should know or settings I should make? Anyone found a solution yet?
Many thanks

OK, I retract the comment about USB being the "norm"... but not the request to Apple to add USB headphones as an alternative because more and more people are using them.
At least this shows people are reading the thread
Thanks for all your feedback, I'll mark the question as answered.

Using iPod touch with speaker dock

I put my iPod touch on my speaker dock, and it connects and charges. But, the music just comes out of the iPod and not the speaker. How do I get it to come out of the speaker?

Make sure the iPod is correctly sitting on the dock. I had exactly the same problem with my iPhone. Try moving your iPod around abit while its sitting on the dock, moving it forwards and backwards slightly. Overall your more than likely to have to take your speaker dock back where you bought it from, or buy a new one.

Using audio mixer with Skype

I was wondering if it is possible to take an incoming Skype conference call and split it into separate inputs at lead into an audio mixer all on one computer. I this possible? Thanks

+ 1
Something very much needed. A software mixer would be a good start as suggested a long time ago here:
http://community.skype.com/t5/General-Discussion/Multiple-caller-Mixing-capabilities/td-p/184156

Satellite A300 - Series Stereo Mix not available with Conexant sound driver

Hi . . .
I have Toshiba Satellite A300 PSAJ0E notebook . . .
I was useing Windows XP Professional . . .
But I am not able to use Stereo Mix the peculiarity . . .
I installed Conexant HD SmartAudio 221 Driver . . .
What can I do in this subject . . .
I thank right now . . .
Best Regards . . .

Unfortunately, but you cannot do much
The point is that this is a Conexant sound driver issue. This options or setting is simply not available in Conexant sound driver and therefore the Stereo Mix port is not available and cannot be used.
I think only an sound driver update can helps so lets wait for a update.
Cheers mate

No sound using stereo mixer with speaker balance s...

Similar Messages

Maybe you are looking for