NO SOUND - using the MSI KT4V 6712

I have recently formatted my hard drives and installed MS Windows XP Pro +SP1 and also installed a new case.
Soon as i turned it on the sound didnt work.
I then tried almost everything inside windows to try to get the sound drivers working but to no success...
I have installed loads of different drivers - AC 97 Audio ones
Tried different speakers and headphones but it still doesnt work
Could it be something on the motherboard as there are two wires hanging around???
SPECS (RIG) :
THERMALTAKE V2000A WITH 7 X 8CM CASE FANS
JEANTECH 400W PSU
MSI KT4V MOBO
AMD BARTON 3000+ @ 2.22 GHZ
1 GB DDR333 RAM
HERCULES 9800 XT
2 X 160GB IDE SEAGATE HARDRIVES
DVD RW -
DVD 16X DRIVE
CREATIVE SOUNDWORKS SW320 SPEAKERS
BBB 100MBS OPTICAL INTERNET CONNECTION
ANY IDEAS PLS??

*************A NOTE FOR OTHERS: ************************************
*************A MAJOR ANNOYING PROBLEM JUST SOLVED *****************
Found that the problem was that the motherboard needed some jumpers on it to be able to channel the audio to the rear ports (if not using a front audio panel!!!!)
Just to let everyone know download the manual of the motherboard from this site!!!, it will tell u on their
THIS WILL DEFINITELY SOLVE OTHER PEOPLES PROBLEMS!!!!!!!

Similar Messages

MSI KT4V (6712) and type of clock generator

Hi!
I try to use SpeedFan for dynamic change of CPU/FSB/PCI/AGP speed. But to do it, I must know one thing: what model of clock generator (clockgen?) in used on my MB, MSI KT4V (6712). Someone know it or have ability to check it (mainboard in my PC is unacessable)? Probably (?) it is ICS 94xxx or ICS 95xxxx, small chip near AGP slot. I've try to use diagnostic aplications like AIDA32, SciSoftSandra and analyze MB images, but without success. If anyone could help me, I'll be really very gratefully
Thanks in advance-
Greetings
Artur ([email protected])

Hi!
Well, I think it is not so danger. First - MSI FuzzyLogic can change FSB/Vcore/Vagp on-line, so it is possible and secure, second - I've try to find clock generator using random types of it. Results - MB hang up, but after PowerOF/PowerOn starts and works fine :-) I've always says that KT4V is a really powerfull model :-)
I see that you have the same MB as mine - could you do me a favour and check clock generator type on our KT4V board?
It will be really helpfull for me ...
Greetings
Artur

Can I use the MSI Gaming App OC settings in Afterburner then uninstall Gaming Ap

Hello all,
I finally bought an MSI GTX 760 TF OC Gaming Edition GPU last week. Unfortunately the OC isn't programmed into the BIOS and to get the highest Factory OC I need to use the MSI Gaming App. The problem is it does not start with Windows or remember your last Clock Selection.
I know Afterburner can start with Windows and apply your last selected profile.
So can I......
1. Open Gaming App and select OC.
Open GPU-Z and see how much the Clock Speed has increased.
Restore the default Clock (Gaming).
Open Afterburner and apply the same increase to the clock value as the Gaming App gave me.
Save the profile.
Tick the 'Start with Windows' box.
Uninstall the Gaming App.
2. Will the above effectively apply the same OC as the gaming App and therfore make the Gaming App obsolete?
3. Also I've read on some forums that Afterburner will only OC the MSI card if the gaming App is installed. I'm away from home so cannot test any of this. Maybe this was the case with the original version of the gaming app. can anyone confirm?
4. Also I've read people reporting that once the OC has been applied it is locked at this high clock and doesn't downclock when idle. From what I've seen the Gaming App does downclock depending on GPU demand. As does Afterburner. Can anyone confirm?
I don't know why MSI did things this way. It's a Gaming Edition card so there should be a way of applying the factory OC and leaving it set that way. The Gaming App is a nice simple little tool but as a bare minimum they should let us start it with Windows and automatically apply the last selected Clock profile.
Dragging the shortcut into the start-up folder doesn't work for me. And even if it did, the last profile selection is not remembered.
To be honest, the Gaming App is ideal for me but only if I can set it and forget it. There should be a box (like there is in Afterburner) that starts the Gaming App when Windows starts and applies the last Clock profile selected.
Now that would be simple. Afterburner is great and gives you lots of control. But I just want the OC that MSI have created. It should be set at BIOS level for a so-called OC Gaming Edition card.
From the official Afterburner Guide on this forum....
"Another thing which needs to be kept in mind is that maximum clockrates for the latest GeForce GTX7xx Gaming requires running >>Gaming APP<<. Switch to Gaming Mode (N770 TF 2GD5/OC (GeForce GTX 770 GAMING)) or OC Mode (N780 TF 3GD5/OC (GeForce GTX 780 GAMING)) to allow maximum boost clockrates."
Many thanks in advance,

Sure you can set these settings (clock rate etc) in afterburner and you should be good to go. Just for stability, run a benchmark. It should be same OC as Gaming App applies, but GApp might change voltages (never used it so not sure).
Afterburner works with ANY brand's card. However MSI Gaming App not.
However if you change settings in Nvidia control panel in : 3D settings -> Global Settings -> Power management mode -> change from Adaptive to Prefer max performance. After this card will neved downclock even at idle.

Silent install using the MSI and incorporating the activation

Good Morning,
I am trying to do a silent install of contribute for SCCM 2007 using the MSI and although the install works i can't figure out how to get the activation and registration silent as well.
I have tried using admin stuido (SCCM version) and adding the registry keys but that is not working.
Does anyone have any idea how this can be done?
I appreciate any help you can give me.
Thanks,
NS2057

In case you are deploying CS5, then I would suggest you to refer the Creative Suite Enterprise Deployment Guide -
http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html
The Deployment Guide would provide you with information on how to supress these behaviours.
The above page also has a similar guide for CS4 deployment as well and also the links to download the Adobe Deployment Toolkits.
Hope this helps .
Regards,
Sharad

Anyone using msi kt4v 6712 with amd 3000+

just wanted to know if anyone has an msi main board kt4v 6712 and is using an amd athlon barton 3000+ and ifyou are having any problems with it and if it works with that board the updage for the bios says it does

thank you bro thats all I needed to know for now only thing I have to worry about is getting the cpu cooler through the mail :-)

Can't record sound using the jack in/out on macbook pro 13 os x

hi
i bought a new macbook pro 13' intel core i5 4gb with the latest os x version 10.8.2. mainly for sound and video editing
yesterday i tried to record sound using garage band and through the mini jack port. once i connected an mp3 player to the mini jack port, the sound prefrences window recognized it as headphones and not as input jack as it did on my friend's same mac with leopard os on it.
it seems like no matter what i try to do (changing instument set up on garage band, restarting the computer with the jack in or out etc...) nothing worked
i bought this mac just so i wouldn't have to deal with these kind of problems....suppose to be a very user friendly os and hardwear.
very dissapointing. please if any one has a clue what can be done?

i'm aware of my other audio interface options, but i would expact this machine to have the basic options every 20 year old pc has, a simple plug and play difault to get audio into my computer. i bought it at b and h in NY and in their specs it says that it's a 'combo kack' - meaning both in and out analog audio ports. after cheaking mac's site it says only headphones.
also tryied to connect a digidesign mini mbox2, through the usb port, and i had to unplug it, shut down the mbp, restart it again etc.. and it also doesn't always work propely and makes all kinds of digital error sounds.
although in this case i can't that the mbox is not damaged.
over all it's very dissapointing. it's my first mac and i figured it would be a much more idiot proof, user freindly work tool.
if you got any other tips i'd appreciate that
thanx alot for the focusrite link

How do I record my voice and other sounds using the microphone in my HP TouchSmart 15?

I just recently got an HP TouchSmart 15 notebook PC and know very little about how to use it. I'd like to use the onboard microphone to record my voice and other sounds, ending up with sound files that I can save and use in creating multi-media presentations. Thanks for helping me learn how to do that!

Hi,
You can use Windows "Sound Recorder'
Start Sound Recocrder
Speak, Sing or may noises
And stop when finish
Save file
To start Sound Recorder
Windows 7: Click Start > All Programs > Accessories > Sound Recorder
Windows 8 & 8.1: Hold down Win key then press Q > Type Sound R in Search box
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Warbled sound using the built in mic on a Macbook Pro

Hello all,
I just got Logic 8 and I'm still in the testing/experiment stages. Right now I'm simply recording my voice, through the *built in mic*, on my Macbook Pro. I'm recording at 192k, 24 bit to test out the sample rate differences and quality of sound. In my audio settings, on my macbook pro, I noticed that it only goes up to 96k. I'm getting audio overload messages, in Logic, and it sounds to me there is a slight "warbled" sound in the recording. Very much like the way a cheap mp3 sounds, underwatery/warbled/cheap. It's subtle but I can detect it.
Is this because the I'm using the internal mic?
Do I need to match my audio settings, on my computer, to Logic's sample rate settings?
Is that why I'm getting audio overload warnings and the distortion?
Any input will help.
Thanx in advance
TTW

The built in mic in your MBP probably costs a dime. It's completely useless for recording except maybe as a quick sketchpad for remembering a melody. They put it in for Skype/iChat purposes, not for professional recording. A more or less decent microphone is at least $100, plus you'll need a proper interface with a mike preamp to connect it to your Mac. Even then, the chances that you'll hear a discernable difference between 44.1 kHz/96/192 are slight.
Best,
Zip

Benefits from using the MSI driver against the latest on my R4870 ?

hi,
Quote from: Stu
You don't always need the latest drivers installed
I am new to the forums and was thinking of OC'ing my video card MSI R4870 512M but before doing so I was wondering if there are any benefits from using the latest driver available at MSI site against the latest driver available from AMD site ?
Code: [Select]
MSI 23-07-2010 Version 8.723
ATI 15-09-2010 Version 10.9
Also from your experience what would be a nice safe OC that this card would hold, I don't want to go overboard just increase it some more ? it is currently at GPU 500 and Memory 900

To answer 2nd part, you can attempt to match the factory OC version of the card. See 4870 OC specs > here < If you haven't done so yet download > Afterburner < from MSI.
4870~something doesn't look right, your GPU clock is way lower than any of the MSI 4870 cards shown on the Global website. From what I see core clock should be at least 750 for the 4870. Are you sure your core clock is at 500 or is that a low power state for that card? does the speed go up under a load? I know speed of the NVIDIA cards drop very low under light load.
I'm pretty sure most people use the CCC drivers from AMD/ATI. If you're not having any problems that can be traced to drivers there's no need to bother with them.

Help - Crackled sound using the speakers for the first time after wake up?!

I've a new white MacBook since Monday.
The problem is:
After turning on oder waking up the notebook, I want to play a sound or music. The first time the speakers are used, the sound is very weak and crackled, but after two seconds or so it's ok again.
The same happens if the first sound is the emptying-sound of the trash or every other sound.
This happens every time I start the computer.
Has anyone the same problem?
Thank you in advance!
Greetings form Switzerland
Message was edited by: Dominik Huber

Many people have experienced this, usually when using auxiliary speakers. It happens with my desktop on booting. It's very normal.
You might find this workaround useful and effective:
https://bugs.launchpad.net/ubuntu/source/linux-source-2.6.20/bug/75906

Choppy Sound using the X-fi Platin

hey guys, just have a problem.
has anyone else using the X-Fi Platinum Card under Vista Experiance choppy sound and/or drop out's depending on what your doing I'm using driver version 2.8.0004 and im experiancing very very weird sound distortions and what not during game play when i play World of warcraft in a window. it's really strange behaviour so ill try and explain it best i can.
Normally, when i play WoW I play it at in a Window. and alot of time's i want to listen to music while i play the game. when i have the sound enabled while playing the game and try and load up itunes the music will work fine. but when i disable the sound in game and contenue to listen to music the sound gets all choppy and distorted, and on rare occasions it'll drop out. but if i have the sound disabled in game and try and play a mp3 it doesnt work at all and just sits there at 0:00
Its the same thing when i want to watch TV and play WoW at the same time.
When i have the sound enabled, the Audio playback in my TV Tuner Card/Software work's perfectly fine (aside from the occasional strange static popping sounds in and out sounds) its when i disable In Game sound in WoW is where i'd start having problems.
its not just with WoW either, when im watching TV and start web browsing, and try and load up something on youtube, usualy ill hear a loud static POP sound before the audio drops.
and if i try and load up itunes too watch a video, same thing, static sound. then audio drop out.
I'd blame vista if i wasnt having similar problems on XP before i upgraded.at the most, these problems just negate my ability too multi task like i'd like too on multipule screens. but atleast when i was on XP i was only geting the occassional audio drop out, and was able to multi task like i wanted too. but can anyone explain what's going on..
Thanks in advanced, my system specs are in my signature.

Yes, most people are having these same issues.

Music sound using the speaker

Hello: My sound when playing music using the speaker on the Iphone is terrible. It's always been that way since I bought it. Is this the way it is using the speakerphone?
thanks

You have several options.
1) Any system will work if you just plug into the 3.5mm headphone jack
2) As of this moment, there is only 1 iPhone certified speaker system out. It will work with the nano as well:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=4EA 7D8B1&fnode=home&nplm=TQ219LL/A
3) Most of the old iPod systems will work. I use my old Bose SoundDock and it works fine.

VooDoo uses the MSI 875P Neo-FIS2R Motherboard

Hello All,
Just check at voodoo.com computers and they are offering the MSI™ 875P Neo-FIS2R as the motherboard in their top of the line PC.
Starting price $4,274.25.
From the postings they seem to have resolved the Bios flashing problem. How was never clear in their postings, but they are pretty confident that it was fixed.
Quote from the main Dude there
“The board is still our #1 choice for the i875 platform.”
I know the…….
“The Truth is Out there”

well just out of interest i punched a few selections
now they dont stop emailing me
Hi Steve,
Thank you for taking the time to submit your latest Luxury F-Class Tower configuration to us on our website. You have made some great choices regarding your next PC purchase, the system you put together looks great. Our next step if you are interested is to fine tune your configuration further with one of our technical experts once we have a better idea of what your needs are. Please do not hesitate to contact my VoodooPC Technical Expert Rahul toll-free at 1-888-708-6636 at your earliest convenience.
What's the Voodoo difference? The Voodoo Allure Paint is standard on the F-Class and is a true automotive finish. We use our own Downdraft Bake Booth and we use professional Sata Spray guns to complete the masterpiece. Voodoo was the first to introduce Automotive finishes to the PC Industry, and we set the standard for many companies. Every F-Class system gives you the full benefit of a full three-year comprehensive parts and labor warranty, which includes two-way shipping and backed up with our Premium version of our Lifetime Upgrade Assurance. Premium Upgrade Assurance gives you the option to upgrade your PC anytime you want, for the life of the PC. With Premium Upgrade Assurance we will cover the cost of shipping both ways on major upgrades (for 3 years), we will cover shipping on parts if you just want to buy parts. If you decide to do a major upgrade we will only charge you for one-hour labor maximum, and we will rebuild the entire machine, we'll update all the drivers and firmware, we will re-cable the machine, and we will reinstall and update the Operating System as if the system were new. If you decide to do a major upgrade we will only charge you for one-hour labor maximum, and we will rebuild the entire machine, we'll update all the drivers and firmware, we will re-cable the machine, and we will reinstall and update the Operating System as if the system were new.
We are also in the business of making high-end gaming machines as many of our satisfied customers are extreme gamers but we have our many customers who generally those who want and appreciate the best quality, craftsman & ultra-reliability money can buy - PERIOD. There are no assembly lines here! Voodoo technicians have industry reputation for squeezing maximum performance from components for maximum power and absolute stability. They handcraft each and every machine we build. They take complete ownership of each system (treating each and every machine they build as if it were there own) from start to finish adding up to 40 man hours for just assembly alone! It takes us a full 35 days to build a system and we never go about making any short-cuts or cut corners - from handpicking the best retail parts direct from the manufacturers (no cheap OEM components or dusty old stock here), careful assembly and world-renowned origami cabling for maximum airflow, softwaring (installing Windows and drivers), rigorous testing (it will NOT leave our facilities unless everything is completely fault free), tweaking for maximum performance & ultra-reliability AND we are perhaps known to have the best open box experience in the market when it arrives at your door. We also offer excellent customer service & support, upgrade Assurance & comprehensive warranty. We are also internationally ISO 9002 certified (which some of our other major competitors are not) and have been in computer business since 1991. Perfection simply cannot be rushed...
If you have any questions or need recommendations regarding your next PC purchase, feel free to give me or my Technical Expert Rahul a toll-free call at the number listed below - we would love to hear from you. Thank you for your interest in a VoodooPC and we look forward to hearing from you soon! Have yourself a great day!
Regards,
Richard Watson
40 hrs to screw together a pc and load windows
wonder if they have any vacancies
one think they still will not give is what i asked for
a final price
nice work and profits if you can get it

Having Problems Using the MSI Display Settings in Vista 32bit

Whenever I try to install the latest Nvidia driver for my video card which is a NX8600GTS OC I can't find the Display setting for my VGA information,VGA Clock, Vivid,Star OSD, etc. It seems that this video card isn't fully compatible with Windows Vista. In the Dual Core Center only certain applications work. Could someone please help? I have a Intel Duo Core E6600 2.4GHz. processor. I think everything is connected correctly. I'm using Windows Vista Home Premium 32bit. Thank you in advance for any help.

Thank you'll for that great advice. You'll are no doubt computer gurus. I've heard of RivaTuner and the other programs you mentioned but I get a little lost in trying to use them to set the fan speed etc. thats why I was relying on the MSI utilities program to guide me because I do know that if I set something wrong as far as the clock speed what have you I can do irreversible damage to my computer. If I could ask you'll one other question. When performing a clean install of my OS after installing the chipset driver to computer's motherboard then it would be best to do what? Install the MSI driver for the video card and then download the latest driver from Nvidia over the one that I installed with the MSI? Thats what I understood you'll to say.

How do i get Stereo Sound using the KONA LHE?

Ok I have a sony HDV HVR-M15 deck, connected to the KONA for video and the audio connected to a mixing desk.
The KONA is also connected to the mixing desk via analog audio XLR to Jack.
At the moment everything i capture is mono one channel sound, and can only play through one speaker. Is there a way to capture in stereo??
At the moment I am getting the KONAs 8 channels of audio, 2 of which are identical and 6 of which are empy!!

check the pan pot on the desk (the yellow pot just above the solo/mute buttons and fader)
on the left channel input from the deck turn the pot anti-clockwise all the way to the left
on the right channel input from the deck turn the pot clockwise all the way to the right
regarding (unwanted?) the multichannel input, launch FCP and open the Log and Capture window
click the clip settings tab in the right hand pane
how many input channels do you have selected in the Audio section
below that popup you can define whether those channels are captured as stereo or mono pairs by toggling the link icon at left of each audio pair level indicators

NO SOUND - using the MSI KT4V 6712

Similar Messages

Maybe you are looking for