No sound volume controller in Satellite L750 Series

I just bought a new Satellite L750-A057 laptop, and found a very stupid design issue that it is has no volume controller ! ONLY WINDOWS one, so If I'm in a middle of any full screen application, I must exit or switch to desktop to lower the volume !! and same for any other situation !!
So, any recommendation about how could I control the sound volume with function keys for example ?

It seems you are right. There is no additional volume controller which would allow to set the sound volume up and down
In many cases the Toshiba Multimedia buttons contain an up and down volume buttons but it seems that the L750 does not support such buttons too
Thats shame :(

Similar Messages

Rear Channel Sound Volume Controller for sound blaster Aud

Hi?Every body Wish you a wonderful new year 2008,?I am using creative sound blaster Audigy? sound card and the speaker system is creative inspire 5. I have the volume controller for front and center and subwooferbut i don`t have the controller for rear channel and the same time the rear channel is working with the low volume?not able to hear the sound from the rear channel but its working fine if i go near to the speaker i can hear the sound very lowi need to increase the sound for the rear channel?If any body know how to control the rear channel for sound blaster audigy could you let me know .... System Specifications:Operating System :Win -XP Sp2Memory : GBVideo Card :Ausus ATI Radian card?

op
ps.
i want to add. some additional information, my 5. speaker doesn't have digital output, the line out for the sub woofer and centre are red and white line just like the same as the other speaker line, i don't know weather it will cause the front doesn't work or not, but i had read some post it said "In the Creative Mixer, be sure to disable the option for Digital Output Only, and set the number of speakers accordingly. For example, if you have a 5. channel speaker system, select 5.."
if, i didn't change the creative mixer to "disable the option for digital output", will it cause the centre and sub woofer have no sound at all? plesae reply A.S.A.P. as i don't know weather it is the problem of the sound card or just a problem of the setting.....thanks alot.

Satellite L750 system hangs after disconnecting the WLan

I bought Satellite L750 series laptop on that i connected Wifi. if i disconnect Wifi then system get hanging. I cant do anything in that. I updated driver software and i checked all the possibilities as my knowledge.

>if i disconnect Wifi then system get hanging.
I assume you are using Fn + F8 to enable/disable the WLan.
Right?
Did you try to recover the system in order to check if this is a system problem?
I think you should do that and should recover the notebook using HDD recovery procedure
Power up the unit, press F8, choose Repair my Computer, choose HDD recovery and follow the instruction on the screen then you will get the system with factory settings.
Then test the WLan.

Satellite L750-1RJ - CPU compatibility

I bought a Toshiba L750-1RJ laptop and I would like to know what CPUs are compatible with my laptop?
Thanks advanced,
Steve

Hi
As far as I know the Satellite L750 series was equipped with different CPU units.
The supported CPUs are port of the Intel Arrandale Mobile Processor family.
The supported CPUs are:
Intel Core i7-620M
Intel Core i5-540M
Intel Core i5-520M
Intel Core i5-450M
Intel Core i3-360M
Intel Core i3-350M
Intel Core i5-430M
Intel Core i3-330M
Intel Pentium P6100
Intel Pentium P6000
Intel (988P) P4500
But note: usually CPU upgrades are not supported by any of the notebook manufacturers. So in case you want to perform such upgrade, this is always your own risk.

Satellite A100-532: microphone sound volume is extremely low

I just bought Satellite A100-532 and I have a problem with sound input. I can't use microphone to chat with my friend on msn or even to record my voice on to the hard drive because the sound volume is extremely low.
I tried turning up all the volume on the desktop and on the RealTek HD sound manager but did not help. Microphone is working perfectly fine as I can hear myself well on the speakers.
Normally, with my old laptop (M30 series) I could use the Sound Recorder to record music which I play using Winamp or WinMediaPlayer but for this new laptop it does not detect any sound at all..just silence.
Please advise.

Hi
You should check also the volume controls in the "Sound & Audio devices" in control panel.
In the "Volume" tab please go to "Advanced".
Then a "Volume control" should appear.
Check if all controls are set to high level.
Furthermore enter the "options" and "properties" and enable all volume controls.
Change also to "recording" and enable there also all controls.
Additional you should check if the all "recording controls" are set to high.
Use "Advanced" option of mic and play around with the mic boost settings.
I'm sure you will find the best settings for your mic recording

Satellite P10-804: Cannot alter the sound volume control

The Sound Volume Control on the front of the unit has set itself to far in the whole and cannot be altered.
Is this something I can fix ?

I dont know if you can fix it.
Do you have enough experience to disassemble the notebook?
Do you have good experience in soldering?
The volume controller is fixed on the motherboard its not easy to say what happens maybe there are some loose contacts
I think its better to contact a notebook technician because he has more experience as a common notebook user like me and you!

Satellite L750 - drivers installation problem

Hello good people of the internet,
I have a problem with drivers' updates/installation on my Satellite L750-1E3, Windows 7-64 bit.
When I launch the installer, it decompresses, telling me it will launch afterwards, but then the window closes and nothing further happens.
I've read about the same problem one person here had with the L855-10P series but, maybe because I'm a girl or maybe because I'm not a native English speaker, I didn't uderstand what to do...
I actually have problem with more things.
My webcam stopped working, when I try to launch it I get the error message that tells me "the initialization went wrong, restart your webcam or computer".
So I tried to reinstall the driver but the problem I described above appeared.
The same driver installation problem appeared when Tempro told me to update my blu-ray driver (I download all the drivers from eu.computers.toshiba-europe.com).
And the last one, for about a month there are problems with the sound on my notebook.
First cracking of sound and then it stops working completely and I have to restart the computer.
Again, I tried to reinstall the sound drivers.
There are two drivers on the Toshiba site, one of them reinstalled just fine but the other one (nvidia, I think) had the same problem as the other drivers.
Someone please tell me what to do, because I am becaoming really desperate and I seriously considered throwing my notebook out of the window.
Thank you

Usually the HDD recovery is the easiest to get the notebooks factory settings and to get it running again.
>My webcam stopped working, when I try to launch it I get the error message that tells me "the initialization went wrong, restart your webcam or computer". So I tried to reinstall the driver but the problem I described above appeared..
Its interesting to know if the webcam or an unknown imagine device (probably webcam) appear in device manager. Please check this.
If the webcam isnt listed there, you should check if the webcam is enabled in BIOS.
To access the BIOS press F2. Then go to Advanced tab -> System configuration -> webcam
If the webcam is enabled in BIOS but still not recognized and not listed in device manager, then you should recover the notebook to factory setting to check if the webcam module isnt faulty.
>The same driver installation problem appeared when Tempro told me to update my blu-ray driver (I download all the drivers from eu.computers.toshiba-europe.com).
The Blu-ray player update works only for notebook equipped with blu-ray drive. If your notebook does not support blu-ray drive

Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

Hello!
I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled.
I do the following:
1. Install Windows 7 x64, SP1.
2. Install LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE&partNumber=PSK30E-02T002B3&serialNumber=&USER_ACTION=Serial%20number])
3. Install all Windows Updates from Microsoft
4. Run Toshiba Software Installer for Win 7 - it installs a couple of drivers and then asks to reboot.
Here is the log file for the first try (win7update.log):
Update started 12\28\2011 at 21:11
Installed TVALZ_O.INF
Installed IO & Memory Access Driver
driver_bluetooth_TC00241200A.exe /s /log /test has been installed with the result code of PASS
util_tvap_TC00215000H.exe /s /log /test /wait15 has been installed with the result code of PASS
Update completed at 21:29
After reboot I run it again and the result is:
Update started 12\28\2011 at 21:38
Toshiba Bluetooth stack has already been installed.
Toshiba Value Added Package has already been installed.
Update completed at 21:40
Any help is appreciated!
Thanks in advance!

You are right this notebook model was delivered without OS.
Win7 64bit is supported for this notebook model and all necessary drivers, tools and utilities are available on Toshiba download page.
What I can say is that all this stuff must be installed in right install order. I know it sounds stupid now but I recommend you to make clean OS again and continue installation following this installation order:
Win7 SP1
Intel Chipset SW Installation Utility 9.2.0.1015
TOSHIBA Supervisor Password Utility 4.8.6.0
TOSHIBA HW Setup Utility 4.8.6.0
TOSHIBA Bulletin Board V2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Management Engine Interface 7.0.2.1164
NVIDIA Display Driver 8.17.12.6669
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Value Added Package 1.5.4.64
USB3.0 Driver 2.0.32.0
NVIDIA HD Audio Driver 1.1.13.1
Conexant Audio Driver 8.51.1.0a
Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
or
Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
or
Realtek Wireless LAN Driver 2.00.0013
TOSHIBA Wireless LAN Indicator 1.0.3
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA Software Modem 2.2.97(SM2297ALS05)
Conexant Modem Driver 7.80.4.53
TOSHIBA HDD Protection 2.2.1.12
Atheros Bluetooth Filter Driver Package v1.0.7
Bluetooth Stack for Windows by Toshiba v8.00.04(T)
Atheros LAN Driver 1.0.0.46
Realtek Card Reader 1.0.0.12
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition V3.1.8
TOSHIBA eco Utility 1.2.25.64
Intel Proset 14.0.2.0.1.s64_wCAT
Intel Wireless Display 2.0.29T
TOSHIBA HDD_SSD Alert 3.1.64.7
TOSHIBA Service Station V2.1.52
TOSHIBA PC Health Monitor 1.7.4.64
ConfigFree 8.0.37
TOSHIBA Web Camera Application V2.0.0.19
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
PatchFiles$$2 PCIIDEREG-1.2
PatchFiles$$3 TosVolRegulator_x64_1.1
It is very important to use right installation order.
Please post some feedback.

Difference between Satellite L750 and Satellite L755

Hi All,
What exactly is the difference L750 and L755 . Isnt it the same thing ?

The Satellite L750-124 and Satellite L755-16T supports the same motherboard.
The chipset is the same but only the CPU was different.
>But I have to remove my keyboard for the constant beeping sound to stop which comes up during POST in bios.
For me it looks like the POST (power on self test) cannot be passed because of the keyboard.
I would say the keyboard was affected too but if you already tested other keyboards and if this did not solve the problem, I guess the keyboard controller is faulty.
_Regarding the other parts like card reader and webcam._
The webcam module is connected to the USB controller on the motherboard.
In case you did not connect the webcam module properly, the webcam will not be recognized.
As far as I know the card reader is embedded on the system board. So if card reader malfunctions, the connection is defective and system board maybe faulty too.
However, as suggested by Dr.Lamp, after motherboard replacement, the DMI info needs to be updated using special tool. This can be done only by Toshiba authorized service partner.

How can i make the volume controller on a pavillion dv4 work after a clean windows install?

Hello!
Recently I performed a clean windows 7 install from a windows install disk I previously owned, the problem is that this disk didn't intalled the drivers and programs specific for this computer. What I want to know is which driver or program I need to install to make the volume controller on my computer to work again? The problem is that the volume bar that previously appeared on the screen and the "bing" sound indicating the volume level doesn't appear or sound now.
All other things seem to work fine, this is the only problem so far.
Thanks!

Hi,
Try downloading and installing the latest HP OSD Utility on the following link.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55152.exe
After the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Headphones volume controller not working on new macbook pro

Hello,
I recently purchased a new macbook pro (15" late 2013) and just noticed that when plugging my headphones (beats solo HD), the volume controller in the headphones doesn't change the volume of the laptop. The headphone controller works fine on my iphone, and on my older macbook pro (2010, running on mavericks too). I checked the Sound settings under System Preferences, and under the Input tab, the new macbook doesn't recognize the headphone microphone either, which my old macbook pro still does. In terms of sound, the headphones work well, and under the Output tab, the Headphones appear, as normal. The sound can also be adjusted using the keyboard keys and the volume adjust on screen, but not with the headphones volume controller, which seems odd to me.
Is there a way to fix this?
Thanks for your time!
Melissa

Hi,
I also noticed this... when I use my old earphones (the white Apple ones that come with the iphone) on my new laptop, everything works fine, including the microphone, volume control, skipping songs... etc. But my other headphones are not recognised at all, just as audio output and nothing else.
My old macbook, however, still fully recognizes both my old earphones and my "troublesome" Beats headphones, even after the latest system update, as does my iphone
So I still don't know what is happening.
Just telling you this so that you make 100% sure your earphones are faulty before discarding them!

Satellite L750-170 Windows 7 Stereo Mix Not Appearing

Hi,
I've been looking for ages on how to enable my Stereo Mix and I just can't get it up...
I've installed the latest driver for my 'Conexant SmartAudio HD', clicked the 'Show Disabled Devices' and the 'Show Disconnected Devices' and I still end up with no Stereo Mix showing. I've got Stereo Mix on my XP, Vista and my other Windows 7 PC before and I really don't know why it won't work on this.
Please Help!!
Thanks

*I found a solution!*
Stereo Mix is a sound device for recording music from you computer.
It is very useful for marketing purpose.
However, it is usually missing in most Toshiba computers.
Here is how to get it back.
This solution worked for my Satellite L750.
- Download the latest Conexant SmartAudio driver for your laptop downloadable at http://support.toshiba.com/.
- Create a new folder (I created one on my Desktop) for the driver and extract the zipped driver files to it with WinRAR.
- You should find a couple folders. Browse through them until you find the folder labeled W7-64/ W7-32, depending on whether you are using 32-bit or 64-bit.
There will be a .inf file inside. There should only be one file with that extension. Open it in Notepad.
- Now search in notepad until you find this section:
;HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable ,Enable,1,01
;HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable ,EPname,1,01
;HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable ,DefGainSettings,1,00,07,00,07
;HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable ,MuteGainSettings,1,00,00
;HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable ,Flags,1,00
;HKR,%EPattributePath%\EpSettings\StereoMixEnable, Enable,1,01
;HKR,%EPattributePath%\EpSettings\StereoMixEnable, MixAssocSeq,1,E0,E0
;HKR,%EPattributePath%\EpSettings\StereoMixEnable, MuteGainSettings,1,00,00
Note the semi-colons in front of each line. Remove all the semi-colons so the 8 lines above read like this:
HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable, Enable,1,01
HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable, EPname,1,01
HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable, DefGainSettings,1,00,07,00,07
HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable, MuteGainSettings,1,00,00
HKR,%EPattributePath%\EpSettings\PcBeepCtrlEnable, Flags,1,00
HKR,%EPattributePath%\EpSettings\StereoMixEnable,E nable,1,01
HKR,%EPattributePath%\EpSettings\StereoMixEnable,M ixAssocSeq,1,E0,E0
HKR,%EPattributePath%\EpSettings\StereoMixEnable,M uteGainSettings,1,00,00
Now cick "File" and "Save".
- Then go to Control Panel, Sounds and Hardware, Device Manager, Sound, Video, and Game Controllers, and right click on Conexant Smart Audio HD, select Update Driver Software.
- Then go to Browse My Computer for Software, Let Me Pick From A List, Have Disk, and navigate to the .inf file (the one you edited in Notepad) in the folder on your desktop.
- It should tell you it is no longer digitally signed and might harm your computer. Install it anyways.
- Now open up your Sound tray. If you go to the "Recording" tab, and make sure "Show Disabled Devices" and "Show Disconnected Devices" are both checkmarked.
- Now you should have Stereo Mix. Right click on it and select "Enable".

Change the sound volume increment?

Is there a way to change how much the Apple remote and keyboard increments/decrements the system sound volume?
Let me explain... I have the Bose Companion 5 sound system. It comes with a little desktop controller to adjust and mute the volume. The desktop volume controller is nice and all, but it's completely independent from the Mac OS volume controls. I could crank the Bose control all the way up, but doing so makes it such that even the lowest Mac OS volume setting is still louder than I'd like (easily audible through the walls), and quiet white noise is heard even if the Mac is muted. Setting the Bose volume to something in the middle or lower limits my volume flexibility when listening to music and I come across that occasional song that I want cranked louder. I know I'm whining, but hear me out.
I recently bought a new desk and made an interesting discovery while setting everything back up. Somehow I had forgotten to connect the Bose volume controller. When I grabbed the Apple remote to adjust the system volume, it seemed to directly adjust the volume on the Bose system (this setup can get VERY loud this way), and no white noise when the Mac is muted. I love the idea of leaving it like this, but even the first notch above mute (via keyboard or remote) is pretty loud. Finite control is possible from the volume preferences panel, but who wants to open that every time to change the volume?

I don't know if these two AppleScripts will help you or not but give them a try.
Place them in your Applications folder or your AppleScript folder (within your Applications folder), then drag them into your Dock.
They are background scripts so you will not see them launch in the Finder.
Have iTunes playing or some other app playing when you test them.
Download: <http://tomx.890m.com/VUpDown.dmg>
Tom

Re: Satellite L750 - advanced mouse settings are not working properly

Satellite L750 model (One month old). The problem is that every time I start the computer, only works the point device of the mouse synaptics , but retains the advanced settings as pressing with three fingers, turns or you can use the wheel to move up and down the page. The funny thing is that is activated by clicking the mouse icon in the Control Panel. Once I access the icon, the mouse works perfectly and appears in the toolbar.
In Device Management, tells me that works perfectly and that the driver is updated.
Does anyone think of any solution? thanks

Hi
To be honest, I dont really understand what you are talking about.
Do you have problems with the USB mouse or the touchpad?
What device does not work correctly: mouse or touchpad?
The L750 series supports an touchpad with additional feature called Gesture (Multi Touch).
Here you can find nice description on Synaptics page how it works.
http://www.synaptics.com/solutions/technology/touchpad
Furthermore the settings could be found in control panel -> mouse -> Advanced tab
FYI: You can disable and enable the touchpad function pressing the small button above the touchpad surface (On/OFF).

Low sound volume Sat-Pro C650-EZ1524D

Can not get volume up to acceptable level even with all volume controls at 100%.
Downloaded Toshiba Audio Enhancement and it only slightly helped. Any suggestion or ideas on how to fix this? I know it is an easy fix, however, I can't figure it out. Thank you for your help in advance...I appreciate it.
Cliff

You should uninstall the 2 audio enhancement programs that comes preinstalled on your toshiba laptop. I just bought a satellite p70-a and i had the same issue with the sound volume being too low. Once I uninstall the two audio enhancement programs and restarted the computer, my volume was way louder.

No sound volume controller in Satellite L750 Series

Similar Messages

Maybe you are looking for