No sound w/ kt4v
I've installed the drivers, windows reads the integrated card fine, I've tried three different working speakers, and i still get no sound from my kt4v. Thanks for your help.
did you open the "Sound Effects" program that should have installed with the cards drivers, its a taskbar icon that sits by your clock, blue with yellow lines in it. If you click on that in the window that comes up you should be able to select which style of speakers, and which port the come out of. Also try just going into the Sound window (click on the sound icon by your clock) and make sure nothing is muted
i know it sounds basic, but sometimes the solution is right under your nose!
JordanChase
Similar Messages
-
MB KT4V, update sound driver AC 97 - no sound after update driver
Hi,
I installed new driver and utilities (to my MB - KT4V) from http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=362&kind=1
always is OK but no sounds come from my computer. What should I do? How Shlould I set Sound manager - which parameter?
Thanks zd.Try re-installing the VIA 4 in 1 drivers from www.via.com and later re-installing the AC97 drivers from www.cmedia.com.tw or www.realtek.com.tw
-
Got this mobo a few weeks back now, everything seemed to be running fine. Decided to change the heatsink/fan for something less noisey.
Now I have noticed a noise !! Sounds like a off centre fan ! Checked all the fans in the system, nope they are all fine. Then realised the noise only happens when I move the mouse(usb) or hotsync my palm(usb) or use the keyboard(ps2) !
The noise is not coming from the soundcard, it appears to from the mobo itself !
Anyone come across this before ?
Sys Specs
KT4V MS-6712
1700xp
512mb Corsair 333mhz
G3 Ti500
Seagate 80mb
Liteon 52x24x52
420 watt psuIt's probably the PSU, some of my systems have the same But you only hear it with very silent systems
With my VIA EPIA-800 i hear it when i use my scroll-wheel -
NO SOUND - using the MSI KT4V 6712
I have recently formatted my hard drives and installed MS Windows XP Pro +SP1 and also installed a new case.
Soon as i turned it on the sound didnt work.
I then tried almost everything inside windows to try to get the sound drivers working but to no success...
I have installed loads of different drivers - AC 97 Audio ones
Tried different speakers and headphones but it still doesnt work
Could it be something on the motherboard as there are two wires hanging around???
SPECS (RIG) :
THERMALTAKE V2000A WITH 7 X 8CM CASE FANS
JEANTECH 400W PSU
MSI KT4V MOBO
AMD BARTON 3000+ @ 2.22 GHZ
1 GB DDR333 RAM
HERCULES 9800 XT
2 X 160GB IDE SEAGATE HARDRIVES
DVD RW -
DVD 16X DRIVE
CREATIVE SOUNDWORKS SW320 SPEAKERS
BBB 100MBS OPTICAL INTERNET CONNECTION
ANY IDEAS PLS??*************A NOTE FOR OTHERS: ************************************
*************A MAJOR ANNOYING PROBLEM JUST SOLVED *****************
Found that the problem was that the motherboard needed some jumpers on it to be able to channel the audio to the rear ports (if not using a front audio panel!!!!)
Just to let everyone know download the manual of the motherboard from this site!!!, it will tell u on their
THIS WILL DEFINITELY SOLVE OTHER PEOPLES PROBLEMS!!!!!!! -
KT4V OnBoard sound (ac97)
Hi all,
I've been trying to install a hercules fortissimo3 soundcard in a KT4V Mobo.
I disable the onboard sound in the bios and try to install the F3 card but the puter locks up. When I reboot into safe mode I see that windows has installed gobs of stuff into Sound, Video and game controllers in Device Manager.
I'm assuming that the onboard sound is causing a conflict. Is there a jumper to disable this? Or is it done strictly through the BIOS?
If anyone has any other ideas or suggestions, I would love to hear them...
Thanks!
Mikethe sound disables by the BIOS alone... try putting your Sound Card in slot 4 and specify IRQ 4. Sounds like you have a hardware conflict.
-
No Sound - KT4V (MS-6712)with Win 7 32-bit
MOBO ... MSI KT4V(ms-6712) WITH WinXP is fine but I can get no sound from Win7 on second partition which is otherwise OK. Is there a driver I can use ?
www.realtek.com.tw download the AC97 drivers.
-
KT4V onboard sound problems (alot)
hello,
just recieved a KT4V MSI motherboard today, installed it ok, turned on onbaord sound, downloaded latest onboard drivers and configured it for 4 speakers and a microphone socket. I open half life up and only the front 2 speakers work, i exit HL and look at the settings and its changed it back to 2 channels (although it still says 4 channel it changes rear to line in) Operation Flashpoint also only runs on 2 speakers, i know both these games support surround sound as i used to have a SBlive5.1 which worked ok with them.
Also when playing music the rear speakers work but sound low quality.
Please please help me with this
thank you
timI have the same problem with my KT4VL. The front 2 speakers are loud as normal, but the rear speakers make almost no noise. I have a 4.1 ch speaker system and use the AC97 onboard in 4 ch mode(with the software set to convert the Line in port to rear). The subwoofer is fine no matter what, just the rear. When the MOBO is set to 2 ch stereo, sound comes from all speakers but the surround is lost as it just splites the stereo. I do not have a clue as to solve the problem and want to very much.
This is my thread on the subject so far: http://www.msi.com.tw/program/service/forum/index.php?threadid=19536&boardid=13&styleid=1&sid=bf5e069916a52f2877c4dc62f0685329&page=1#8
Maybe a driver problem but I have the lastest. Hope the MSI people can help us on this. Welcome to the MSI forums! -
MSI KT4V-L sound not working!
Hey all
I've been trying for the last day to get my sound to start working out of my MSI KT4V-L motherboard to no avail. I have all the latest drivers installed, all of the volume sliders at max, all of the settings I can think of set correct....and I know the culprit is not the speakers, I tesed them with my discman, and they worked just fine. What can I do?Cool, glad you got it going
And thanks for posting back to let us know -
Hey, for some reason (and I dont know why) my sound took a crap on me right in the middle of doing completely nothing on my pc. I get no sound what so ever. I restarted, shut down and booted again, reinstalled the driver, tried different speakers, and nothing helped. Although, when I install the drivers and/or roll them back I get sound until I reboot, where as they go bad again. Any ideas on what's going on?
I uninstalled the onboard hardware in my Device Manager and restarted and it started up working. Thanks! If, however, I start having problems again I'll come back here....thanks again
-
Kt4v inboard sound 4 channel Fail
i need help whith myin board sound card
i install all the new drivers for in board sound and nothing
the 4 and 6 channels doesn't work why
i can hear jus a little sound on rear and center channel but is nothing ??
why?
Xp Hom userDid you enable 4 channel or 6 channel in the Sound control panel.
Try Start>>Run>>type in "Soundman" and the control panel should popup if not already enabled at startup. -
KT4V sound probs....:(
Hi,
I recently bought a new MSI board KT4 with sound and LAN on board...
while tha LAN works fine I have troubles with the sounddrivers...
whenever I try to play some mp3's or watch a movi after a short time my system freezes...:(
normally it doesn't...
so I pluged in my old Live! Player card and all probs r gone...
are the drivers fault? should I change any settings?
I have upgraded the bios to 1.3 and it still occurs...
System:
Ram simquality PC333 256 Mb
HDD Maxtor 80Gb 5400
CD Traxdata 4x cd-writer and LG 16x DVD
Athlon XP 2000+
thnx 4 any helpHmm strange I would try downloading the newer drivers from msi homepage and update the bios unless you havn't allready. Drop me an email if you have any more problems
-
Well the sound crackles and stuff. The sound is great but every now and then it crackles down just like theres a glitch i some wire or somtn (but it isnt ive checked). Ive reinstalled IDE controllers, Ive updated chipset, audio drivers and set win xp to fit my soundsettings.. but still.. real pain when listening to MP3s. :(
my system is:
AMD XP 2100 Thoroughbred
KTV4 Mobo
256 pc2700 ddr ram
Hercules 8500le 64mb graphics
IBM 60Gb Hdd
BTC cd/cdrw
Samsung DVD sd 608argh.. i thought 300W would be sufficent.. or is it just that my psu sucks? but then again my system is not under heavy graphic or hdd process at the moment but it still acts up..
-
KT4V-L - onboard sound problems, any suggestions what could cause this
Board and system (winXP and xp2400+) set up fine. The only problem is with the sound. Every now and then i get a horrible screeching sound out of the speakers (a bit like feedback).
This is only intermittant, last night it ran for 4.5 hours and only 'screeched' once for about 5 seconds. It doesn't seem to be the speaker (it happens on different ones) or the speaker connections (i wiggle them around but can't reproduce the noise).
At one point they were bad so i closed down and whilst it shut down the noises actually increased.
Are there known problems with the onboard AC97 sound.
Can the PC-Cillin cause sound problems? Any suggestions greatly appreciated as the answer i got is to try a soundcard - which i hope will fix it.
thanks
Docthanks Asaf
to be honest i can't recall - i have ahd a mic attached but don't think it was everytime i had the noise
in any event - surely it still shouldn't make a noise like that anyway
just got a cheap (£4) Soundblaster 128 so will try that
cheers
Doc -
How to connect 2nd audio to KT4V
Hi all, I have just purchased a KT4V board, I can only find 1 cd (CD1) audio input on the board, I want to install a DVD rom as well as my current burner, how do I get audio to the board?
thanks for the reply, hmm... i am a bit green at this so a sound card would solve this problem??
("...remember there are no silly questions, just silly people...") -
Big Problem with KT4V. PLEASE HELP!!!!!!
Hello ewerybody.
At first I describe you my confiugaration.
KT4V Mainbord
AthlonXP 1700+
256MB DDR 333
Segate Barracuda 20GB
CD-ROM LG 52X
Power Supply 230V
WIN 98SE
And now the problem.
It appears when the procesor is set to XP 1700+. After the temerature of processor rise obove 55 C my computer is shutdown automaticly even if the bios option "critical CPU themerature" is disabled. When it happens something like alarm siren goes off. It is one high and one low sound.
Another big problem is dramaticaly low ( even 20% - after one hour work ) "system resources". I dont know if it is call like that in english so it is START->Settings->Control Panel->System->"performance".
Please help!!!!!!!!!!!!First thing you might want to do is get a new PSU. Anything under 300W is pretty much going to make for an unstable system for any processor like yours. AMD recommends(if I remember correctly) 300W or better and also read up on this sticky, I think it will help you out.
http://www.msi.com.tw/program/service/forum/index.php?threadid=1131&boardid=13&styleid=1
Especially the Power Supply paragraph 8)
Maybe you are looking for
-
I have several applications that were created in 10.1.3. Some are JHS, some not. After migrating them from 10.1.3 to 10.1.3.1 I get a no such method error. See below. I have already tried replacing the jsf-impl.jar file. Any suggestions? Thanks, Jim
-
How do I get CC on DVD media?
Hello all, For the last several weeks, I have been trying to get Adobe to send me a DVD that has the latest version of CC. I read from a Adobe blog saying that support agents will send out media for people who requires it. Source: http://prodesigntoo
-
Scheduled Delivery Bulletin Board
This post informs customers as to the current status of Scheduled Delivery Print Apps and links to available resources Scheduled Delivery Status- As of last edited date Today On Time All Print Apps are on schedule. Yesterday On Time All Print Apps
-
Have been trying for 4 days to do and update that takes 4 hours each time. It always times out on the last 2 seconds every time. Any ideas why?
-
Hi everybody, After to upgrade our database to release 11.2.0.2 we get the next error when we execute the automated Oracle DB parameter check from note 1171650: The following table has not owner PUBLIC or SYS: DBA_TABLES Before the upgrade, the repor