No sound when clip uses mp3 for its audio source in iMovieHD

My finished DVD plays OK on computer DVD players, but when I put it in a set-top box (I've tried on two), it plays the main chapter muted. I've experimented with all possible audio settings on my set-top DVD players to no avail.
The iMovie project contained three chapters. The first and last chapters play OK, and they use camera mic audio. The one in the mddle uses mp3s for its audio, grabbed from my iTunes library (they are not DRM or anything like that).
Any ideas? I'm using iMovieHD/iDVD 6, my QT is 7.1.5

Search this forum for imported iTunes music into iDVD and you will see there are many who are having very similar issues with these imported mp3 files. The topic has been well covered already. Has it been completely resolved yet? ..... No.
However, you should follow the advice on these posts carefully and make sure to use apple's software updater to help resolve many of these known issues.
I believe John Griffin's reply /post sums up the current status well:
I suspect burning out to a CD and then pulling back in would work, but I'd love apple to do better than that. Being able to bang out a DVD in few easy steps is (was?) the appeal of the Mac/ILife suite, and I don't have the time or inclination to make the process more complex.
I just installed a new ITunes update that must have come out in the last few days, and, drumroll please,...... the problem persists....

Similar Messages

In my iPad mini,when my use in app streaming , there is no sound.. Can anybody help? It used to be ok before. For example, there is no sound when I use YouTube clip in a news item or magazine like pulse..

nno sound when I use in app streaming

Hello Saranginotes,
After reviewing your post, I have located an article that can help with iOS audio issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

I have iPhone 4 but its very slow when i wright message or search for name finally when i use the keyboard its coming very slow

i have iPhone 4 but its very slow when i wright message or search for name finally when i use the keyboard its coming very slow

Try Settings > General > Reset > Reset All Settings.

Why do I get static sound when I use a headset splitter iwith my macbook air 13"?

Why do I get a static sound when I use a headset splittter with my macbook air? The headphone works perfectly but when I put the mic in the splitter, the sound gets a little bit static. Any advice will be greatly appreciated.
Thank you!
Cheers,
francismba

I suggest an appointment at an Apple store genius bar for a free evaluation.
Perhaps an Apple Hardware Test may provide a clue:
https://support.apple.com/en-us/HT201257
Note that an error free AHT is not definitive.
Ciao.

When iam using jdownloader for dowload, the firefox did not work at any page, as like there in no internet conexion?

When iam using jdownloader for dowload, the firefox did not work at any page, as like`` there in no internet conexion?``

you need to check whether '''jdownloader''' is compatible with the Firefox version you are using.
-> Tap ALT key or press F10 to show the Menu Bar
-> go to Tools Menu -> Add-ons -> Extension section -> check the Status of '''jdownloader''' extension -> if '''an update''' is available for this add-on then install the update -> Restart Firefox and check again check the compatibility -> if it is '''GREYED with Exclamation mark''' then it is incompatible with Firefox
Try using this extension to force compatibility.
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Check and tell if its working.

When will you make an IPad YouTube app. There is one for iPhone and when you use it for the iPad the quality is bad since you have to zoom in. Please fix

When will you make an IPad YouTube app. There is one for iPhone and when you use it for the iPad the quality is bad since you have to zoom in. Please fix

If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you are running iOS 5 or iOS 6, the system sound control is in the task bar at the bottom. Double tap the home button and swipe all the way to the right in the task bar to get to the speaker icon on the left side. Tap on that and the sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Getting errors when iam using BAPI_PO_CREATE1 for Purchase Order creation

Hi sap Gurus,
I am getting Errors when iam using BAPI_PO_CREATE1 for Purchase Order creation that Material (144) does not exist but it is alreardy maintained in MM01.
I dont get how it is coming.and what are the mandatory fields in bapi BAPI_PO_CREATE1 in item level .that is too material only.
pls let me know .
thanks in advance.

Hi,
Check the sample code..
report zpo_test             .
*DATA DECLARATION
constants : c_x value 'X'.
*Structures to hold PO header data
data : header like bapimepoheader ,
headerx like bapimepoheaderx .
*Structures to hold PO account data
data : account like bapimepoaccount occurs 0 with header line ,
accountx like bapimepoaccountx occurs 0 with header line .
*Internal Tables to hold PO ITEM DATA
data : item like bapimepoitem occurs 0 with header line,
itemx like bapimepoitemx occurs 0 with header line,
*Internal table to hold messages from BAPI call
return like bapiret2 occurs 0 with header line,
*Internal table to hold messages from BAPI call
pocontractlimits like bapiesucc occurs 0 with header line.
data : w_header(40) value 'PO Header',
purchaseorder like bapimepoheader-po_number,
delivery_date like bapimeposchedule-delivery_date.
data : ws_langu like sy-langu.
*text-001 = 'PO Header' - define as text element
selection-screen begin of block b1 with frame title text-001.
parameters : company like header-comp_code default '122' ,
doctyp like header-doc_type default 'NB' ,
cdate like header-creat_date default sy-datum ,
vendor like header-vendor default '2000000012' ,
pur_org like header-purch_org default 'PU01' ,
pur_grp like header-pur_group default '005' .
*sociedad like HEADER-COMP_CODE default '122' ,
*vendedor like HEADER-SALES_PERS default 'sale person'.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-002.
parameters : item_num like item-po_item default '00010',
material like item-material default '12000000' ,
tipo_imp like item-acctasscat default 'K' ,
*pos_doc like ITEM-ITEM_CAT default 'F' ,
shorttxt like item-short_text default 'PRUEBA BAPI' ,
grup_art like item-matl_group default '817230000' ,
plant like item-plant default '3001' ,
mpe like item-trackingno default '9999' ,
*contrato like ITEM-AGREEMENT default '4904000003' ,
*quantity like ITEM-QUANTITY default 1 .
po_unit like item-po_unit default 'EA'.
selection-screen end of block b2.
Par?mnetros de imputaci?n
selection-screen begin of block b3 with frame title text-004.
parameters : centro like account-costcenter default '1220813150',
cuenta like account-gl_account default '6631400' ,
num_pos like account-po_item default '10' ,
serial like account-serial_no default '01' ,
ind_imp like account-tax_code default 'I2' .
selection-screen end of block b3.
start-of-selection.
*DATA POPULATION
ws_langu = sy-langu. "Language variable
*POPULATE HEADER DATA FOR PO
*HEADER-COMP_CODE = sociedad .
header-doc_type = doctyp .
header-vendor = vendor .
header-creat_date = cdate .
header-created_by = 'TD17191' .
header-purch_org = pur_org .
header-pur_group = pur_grp .
header-comp_code = company .
header-langu = ws_langu .
*HEADER-SALES_PERS = vendedor .
*HEADER-CURRENCY = 'DOP' .
*HEADER-ITEM_INTVL = 10 .
*HEADER-PMNTTRMS = 'N30' .
*HEADER-EXCH_RATE = 1 .
*POPULATE HEADER FLAG.
headerx-comp_code = c_x.
headerx-doc_type = c_x.
headerx-vendor = c_x.
headerx-creat_date = c_x.
headerx-created_by = c_x.
headerx-purch_org = c_x.
headerx-pur_group = c_x.
headerx-langu = c_x.
*HEADERX-sales_pers = c_x.
*HEADERX-CURRENCY = c_x.
*HEADER-ITEM_INTVL = c_x.
*HEADER-PMNTTRMS = c_x.
*HEADER-EXCH_RATE = c_x.
*HEADER-EXCH_RATE = c_x.
*POPULATE ITEM DATA.
item-po_item = item_num.
item-quantity = '1'.
*ITEM-MATERIAL = material .
item-short_text = 'prueba bapi_po_create1'.
*ITEM-TAX_CODE = ''.
item-acctasscat = 'K' .
*ITEM-ITEM_CAT = 'D' .
item-matl_group = '817230000' .
item-plant = '3001' .
item-trackingno = '99999'.
item-preq_name = 'test'.
*ITEM-AGREEMENT = '' .
*ITEM-AGMT_ITEM = ''.
item-quantity = '1' .
item-po_unit = 'EA'.
*ITEM-ORDERPR_UN = 'EA'.
item-conv_num1 = '1'.
item-conv_den1 = '1'.
item-net_price = '1000000' .
item-price_unit = '1'.
item-gr_pr_time = '0'.
item-prnt_price = 'X'.
item-unlimited_dlv = 'X'.
item-gr_ind = 'X' .
item-ir_ind = 'X' .
item-gr_basediv = 'X'.
*ITEM-PCKG_NO = '' .
append item. clear item.
*POPULATE ITEM FLAG TABLE
itemx-po_item = item_num.
itemx-po_itemx = c_x.
*ITEMX-MATERIAL = C_X.
itemx-short_text = c_x.
itemx-quantity = c_x.
*ITEMX-TAX_CODE = C_X.
itemx-acctasscat = c_x.
*ITEMX-ITEM_CAT = c_x.
itemx-matl_group = c_x.
itemx-plant = c_x.
itemx-trackingno = c_x.
itemx-preq_name = c_x.
*ITEMX-AGREEMENT = C_X.
*ITEMX-AGMT_ITEM = c_x.
itemx-stge_loc = c_x.
itemx-quantity = c_x.
itemx-po_unit = c_x.
*ITEMX-ORDERPR_UN = C_X.
itemx-conv_num1 = c_x.
itemx-conv_den1 = c_x.
itemx-net_price = c_x.
itemx-price_unit = c_x.
itemx-gr_pr_time = c_x.
itemx-prnt_price = c_x.
itemx-unlimited_dlv = c_x.
itemx-gr_ind = c_x .
itemx-ir_ind = c_x .
itemx-gr_basediv = c_x .
append itemx. clear itemx.
*POPULATE ACCOUNT DATA.
account-po_item = item_num.
account-serial_no = serial .
account-creat_date = sy-datum .
account-costcenter = centro .
account-gl_account = cuenta .
account-gr_rcpt = 'tester'.
append account. clear account.
*POPULATE ACCOUNT FLAG TABLE.
accountx-po_item = item_num .
accountx-po_itemx = c_x .
accountx-serial_no = serial .
accountx-serial_nox = c_x .
accountx-creat_date = c_x .
accountx-costcenter = c_x .
accountx-gl_account = c_x .
account-gr_rcpt = c_x.
append accountx. clear accountx.
*BAPI CALL
call function 'DIALOG_SET_NO_DIALOG'.
call function 'BAPI_PO_CREATE1'
    exporting
      poheader         = header
      poheaderx        = headerx
    importing
      exppurchaseorder = purchaseorder
    tables
      return           = return
      poitem           = item
      poitemx          = itemx
      poaccount        = account
      poaccountx       = accountx.
*Confirm the document creation by calling database COMMIT
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
IMPORTING
RETURN =
end-of-selection.
*Output the messages returned from BAPI call
loop at return.
    write / return-message.
endloop.
Regards
Sudheer

When i use language for non-unicode [Russian] and i insert another language

when i use language for non-Unicode [Russian] and i insert another language. it transform to Russian.
i insert Thai language into MS access it transform to Russian type.i try to change anything,CharSet, sun.jnu.encoding.
but it doesn't have any effect.How can i insert Thai data into database and in database shown Thai data not another type.
Thank you for help.My English is not good,Sorry

that is a little-known known issue
Check this post:
http://myitforum.com/cs2/blogs/smslist/archive/2009/01/12/mssms-userlocale-in-mdt-sccm-also-changes-system-locale-9a532hdf.aspx
He details how to modify the ZTIConifgure.xml file.

TS3173 I have mac book pro and recently bought mountain lion online i then used bootcamp to upload windows 7 now i have no sound when i use windows what can i do to get sound.

I have mac book pro and recently bought mountain lion online, i then used bootcamp to upload windows 7 now i have no sound when i use windows what can i do to get sound.

Install the required Windows drivers: Boot Camp Support Software 5.0.5033. Download this link preferably from Windows. Otherwise, download onto a FAT formatted USB disk from which you can copy to your Windows system.

Why do my images appear washed out when I use Save for Web?

Q: The color/brightness/tone of my image changes when I use
Save for Web. Why?
A: Photoshop is a color-managed application. The Web is not. Normally, when you view an image in
Save for Web or
ImageReady you are viewing it without color management and see it how it will appear when uploaded to the Web.
To minimize changes, Convert your image to sRGB (i.e from
Edit menu choose
Convert to Profile )before using
Save for Web. You should also make sure that
Save for Web has been configured so that images are displayed using the document color profile (see attached screenshot for guidance).
You should also ensure that your monitor properly calibrated and the gamma is set to 2.2.

Same here. Didn't get any good New Years Eve photos indoors.

When I use SSIS for extract from OLAP Database, then the error random occurred,Error Code = 0x80040E05

I have tired for this!
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.

I have had the same error on SQL2008 and now on SQL2012 SSIS, but have been able to eliminate / workaround.
We have a Loop Container in our Control flow that contains a data-flow task with an MDX source. The MDX query for the data-flow source is dynamically built (via an expression) on each iteration of the Loop container (however it always returns the "same shaped"
results - only the filters in the WHERE clause are different).
We've found the error to be somewhat intermittent - sometimes the package will complete successfully, other times it will fail with the 0x80040E05 error at varying iterations thru the container loop.
To alleviate the problem we setup the SQL Agent job-step for this package to re-try on failure for up to 5 retries - not an ideal workaround, but it helped to improve the success rate of the Job.
We have no idea why this error is occurring or what is causing it, however it appears to be timing-related in some way and I have only seen the issue when using a SSAS OLE-DB data source with a dynamically generated MDX query. I have managed to virtually
eliminate the error from occurring with a not ideal workaround in the SSIS package - no idea why this works/helps (hopefully Microsoft will be able to work it out and resolve the issue as it's been plaguing us since SQL2008 and is still here in SQL2012
SP1...
Workaround for MDX causing 0x80040E05 error:
Within our loop container we have added a Script task with OnSuccess precedent constraint to the data-flow task that contains the dynamically generated MDX source query. The script task simply introduces a WAIT in the processing immediately after the
data-flow task completes of about 5 seconds, before allowing SSIS to continue with the next iteration (e.g. System.Threading.Thread.Sleep(5000)).
With this delay in place we have had much more stable SSIS package executions - dont know why, but that's what we havce observed. Also note that when we migrated to SQL2012 SSIS packages the 0x80040E05 error returned, however we were able to eliminate it
once more by increasing the WAIT time to 10 seconds on this script task.
Now waiting for 10 seconds is not an ideal solution / workaround to this problem - particularly when it is contained within a Loop Container (in our case it has added nearly 30 minutes of "WAIT time" to the package execution duration), however this workaround
is better than having the package fail 80%+ of the time...
regards,
Piquet

My iPad getting very warm when i use it for bit in longer time

Why my ipad is getting very warm when i use it for bit in longer time, any body has same experience?, Why my ipad is getting very warm when i use it for bit in longer time, any body has same experience?

The Temperature warning usually appears when the iPad has been set in a place where it gets so hot to the touch that you'd almost burn your hands if you picked it up. The temperature caused by the processor or charging the battery should never reach that level. If you feel your pad is too warm when you are using it Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

It can't find URL when i use HLS for vod and the vod file name contain Chinese.

It can't find URL when i use HLS for vod and the vod file name contain Chinese。eg： http://127.0.0.1:8134/hls-vod/你好.mp4.m3u8.
How does it support Chinese path?

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

Should I unplug my AE when not using it for months at a time?

should I unplug my AE when not using it for months at a time?

Yes, in my opinion.....unless you really like to have a green light "on" all the time.

I get an audio sound when my S5 connects to a wifi source. How do I stop the sound?

I get an audio sound when my S5 connects to a wifi source. How do I stop the sound?

Let's see if we can get that notification sound off treecastle! Please try going into Settings> Sound> Notifications> select Silent> Apply. This should get rid of that notification.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

No sound when clip uses mp3 for its audio source in iMovieHD

Similar Messages

Maybe you are looking for