No Sound when converting MPEG file to MOV - Quicktime Pro

Hi Everyone,
Just got my first Mac (MacBook Pro) which I love but I'm having a problems importing MPEG 4 files from my Sony digital camera. They play fine through quicktime in the sony format but when I import into quicktime (or imovie for that matter) then export in a .mov file all the sound is lost.
I see some people have reported problems with sound similar to mine but none appear to be the same?
Any ideas??
Many Thanks
Wes
Ps Running all the latest updates..
MacBook Pro   Mac OS X (10.4.7)  

I am having a similar problem and I see this was never persued any further. I am trying to convert an mpeg file to a mov file using quicktime pro. When I do there is no sound.
Movie info for mov file is: Format is H.264 Decoder, 320 x 240, Millions, FPS is 15, Data Rate is 256.21 kbits/sec.
Any help would be greatly appreciated. I'm new to quicktime and frustrated from spending hours trying to figure this out! Thanks in advance!

Similar Messages

  • No sound when playing mpeg files

    I can't get quicktime to play sound when I try to play videos that are mpeg files. I already downloaded mpeg-2 playback as well as Perian 1.0 but it still won't play sound. Any suggestions?

    To Apple Discussions!
    Solution
    1. Open Audio MIDI Setup (/Applications/Utilities/), then check the Audio Output setting.
    2. Change the Audio Output setting to 44100.0 Hz.
    3. Quit Audio MIDI Setup.
    KB article - No sound from some applications, but system alert sounds play (Mac OS X 10.3, 10.4)
    Another trick: If you have GarageBand installed, open it (maybe open a GarageBand document) and then quit out of the application.

  • Clip sound when i send files to trash macbook pro early 2008

    Hi.I need to ask a question.
    Nowdays when i send a file to trash,i hear random a clip sound.Not always but often.I suppose, this short clip is coming from the HD.I'm also hearing this sound  when i save a screenshot or dublicate a file, but again the issue is random and it is not always appearing. I have already run Disk Utilities,Drive Genious and Tech Tool Pro and i didn't get and problem on it.Any suggestions?
    Thanks in advance.

    Your profile indicates you are using iWorks 08, these applications are not compatible with Yosemite. To open and create new Keynote presentations, upgrade to Keynote 6.5 by purchasing the latest version in the Mac App Store.

  • Loss of sound when converting video files

    In iTunes 7 I am converting my video files such as avi so that I can put them on my ipod, but for some reason it stopped having sound. The video is still fine, but the sound is gone. It worked fine for the first 10 files or so and then it just stopped. Does anyone know why or how to fix this?
    iTunes 7   Windows XP Pro  
      Windows XP Pro  

    most likely you need to demux the file (untangle the audio and video). MPEG Streamclip is a good way to go to do this.
    Export as a Quicktime DV-NTSC or DV-PAL (depending on your part of the world) and all should be good.
    Cheers,
    x

  • I have converted m2ts files to .mov to edit in FCE (4.0.1) When I drag the clips into the timeline they need rendering, as much as a minute for a 30 sec. clip. Is this normal? I am using OS 10 . My easy setup is apple intermediate codec, 720p30. Any help

    I have converted m2ts files to .mov in streamclip,  for editing in fce 4.0.1. When I drag them into the fce timeline the clips need rendering, as much as a minute for a 30 second clip. Is this normal? My OS is 10.6.8. My easy setup in fce is apple intermediate codec 720p30. Any advice to avoid the rendereng would be helpful. Ann

    To what codec, frame size & frame rate did you convert the files in Streamclip?
    If it isn't AIC 720p30, you'll need to render.
    x

  • How can I convert rm file to .mov?

    Hi,guys
    Can anyone tell me what software is used for converting RM file to MOV file?
    Thanks

    I had the same issue, however I used this program to transfer ...avi,mpg,wma..etc...;
    http://www.videora.com/en-us/Converter/iPod/
    I'm pasting this from the Videora site, the settings worked for me when others didn't, enjoy:
    Configuring videora converter
    0) Start Videora iPod converter.
    1) Click setup in the left nav.
    1.5) Click the profiles tab.
    2) Click new profile.
    3) Now, configure that profile:
    profile name: ipod
    in the video settings section...
    mode: MPEG-4 > CBR
    resolution: 320x240
    passes: one
    bitrate: 768 kbps (384 kbps also works)
    framerate: 29.97 fps
    in the audio settings section...
    bitrate: 128 kbps
    sample rate: Input
    channels: stereo
    4) Click apply to save the profile.
    Now, you're ready to transcode.
    1) Click convert on the left nav.
    2) Click the transcode new video button.
    3) Pick your source video. Mine was an AVI from a torrent.
    4) Under quality profile, choose "ipod", the profile you created using the steps above.
    5) Click start.
    Now you're ready to get the video on your ipod
    1) In iTunes, under the File menu, select add file to library. Find the transcoded one. By default, the transcoded videos pop out under the Videora install directory.
    2) Drag and drop to your ipod.
    Questions/observations:
    1) I haven't been able to get H264 anything to work. Is it broken? How much smaller than MPEG4 is it?
    2) 768 kbps video was about 400 megs/hour; 384 kbps video was about 231 megs/hour. I could readily see a difference in video quality.

  • Converted .avi files to .mov in quicktime, can't transfer to ipod.

    so i recently converted .avi files to .mov using perian in quicktime. i imported them into itunes, and they play just fine there. unfortunately, they won't load onto my ipod. i get an error that the format is not recognized by my ipod. has anyone had this issue? if so, am i doing something wrong, and/or how can i correct this? i'm using a 2 ghz powerpc g5, and a 160 gb ipod classic. thanks!

    You need to convert to MPEG-4.
    (55389)

  • I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

    I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

    I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
    Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
    Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
    Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
    You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
    In order to determine what compression formats wewre used in your AVI files you can
    1) Try checking the Finder "Info" window,
    2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
    3) Use a general media utility app like "MediaInfo" to read the file characteristics.

  • Convert MXF files to MOV files, NO LASTCLIP.TXT in FCP 5.1.4

    Hello everyone. I am new to the forums. I have a project I have been asked to edit where the files came off of a P2 Card from a Panasonic HVX2000. The problem is, they didn't copy the LASTCLIP.TXT files off of the P2 Card. So I just have the files themselves. Is there a way to convert the files to .MOV files? I do know about the Log & Transfer, but you need the LASTCLIP.TXT for that. Thanks!!

    #38-P2 - Missing LASTCLIP.txt file. How to rebuild.
    Shane's Stock Answer #38 - When you offloaded the P2 cards, you forgot to get the LASTCLIP.tct file? No worries, not all is lost.
    MISSING LASTCLIP.TXT FILE:
    http://www.dvxuser.com/V6/showthread.php?t=58755
    If you neglected to copy the "lastclip.txt" file all is not lost. Much like the six million dollar man, we can rebuild him.
    Lastclip.txt can be generated by any text editor. If you are using a mac then open up textedit.
    Create a new txt file. It will have 3 lines to it.
    The first line is the name of the last clip that was recorded.
    Back to the finder. Open up your CONTENTS folder. In there, open up your VIDEO folder. Organize the folder by Date Last Modified. Find the name of the last file in this folder. If you have 16 clips in the folder is will be 0016ag.mxf or something like that. Four numbers and two letters followed by .mxf.
    Take this name and place in the first line of your text file. On the next line of the text file type in "1.0" (don't include the quotes).
    The third line is the number of clips in the folder +1. If you have 16 clips then the third line should read "17" (again no quotes).
    I'm not 100% sure if the number on the third line is the number of clips left in the folder (after any on-set deletions) or if it is the total number of clips generated during this session with the card. Try both. Remember to add 1 to that number.
    Your txt file should like something like this:
    0016ab.mxf
    1.0
    17
    That's it. You should be good to go. Put your CONTENTS folders in separate folders with separate LASTCLIP.txt folders and import them as separate P2 cards.
    The annoying thing is that all of the various .mxf files in these 6 folders are locked items and they must all be unlocked manually to erase them.
    It's much easier to import direct into FCP 5.0.4 or higher. It does so without leaving all of these locked files on your computer.
    Credit for this solution goes to Randy Wedick.
    Shane

  • Convert mod files to mov for imovie

    A helpful person on the forum suggested I use mod converter to convert mod files to mov for imovie. I have purchased the program from the internet but am having trouble getting them to respond with registration number so as I can get started. Has anyone had this problem or do you know the telephone number for emisoft which is who I purchased it from.

    wuppet, it is unfortunate that this method did not work for you... I have tested this method my self with iMovie 08 & 09 with JVC .mod files.
    I can really only suggest a few things:
    1. Make sure that you are changing the .mod extension to .mpg, as I am sure that you did.
    2. Attempt to get the originals from the camera, if they're still on the camera. I know that you say that they're the wrong format but iMovie 08 and 08 both support the .mod files found in JVC hybrid cameras. But make sure that iMovie is opened and running before you attach the camera to the Mac. Also make sure that the camera is set to "playback on PC" once you plug it in.
    3. You can download the free VLC app, this will allow you to view the movies to verify that they're not corrupt somehow. You'll be required to change the extension to .mpg or .mpeg for this app to read the movies.
    http://vlc.us.com/best-media-player/vlc-media-player.php?brand=vlc.us.com&s=goog le&c=vlcuscombm2_bingadm_CS_PG_XB_WB_ATSK&k={keywords}&pk=56-3

  • How can I convert MPEG files (stored on a PC) to use in iMovie on my Macbook Pro?

    How can I convert MPEG files (stored on a PC) to use in iMovie on my Macbook Pro?

    Get a free app called MPEG Streamclip.
    Available here.
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    Drag your clip or clips into MPEG Streamclip. Then use FILE/EXPORT TO QUICKTIME to export the clips in Apple Intermediate Codec.
    Sometimes, MPEG2 clips also require that you install the Apple QuickTime MPEG2 Playback Component. MPEG Streamclip will tell you if you need this. This is available from Apple for $20.

  • How to keep Korean fonts when converting .pages file to .epub file

    Hi, I am also asking about embedding Korean fonts other than English when converting .pages file to .epub file.
    I really like to use application for Mac in order to make certain file format for e-books though there seems to be some problem that should be improved.
    Please answer to my question and help me to find the best way to make .epub file with Mac.
    37Fides

    You should have no problem keeping your text in Korean when you convert to .epub from .pages.  Are  you saying that the Korean is converted to something else?   Please provide more details about what is not working the way you want.
    Pages can't embed fonts, you would have to use another app.  But there is no need to embed fonts to create Korean books.

  • Converting MPEG file to DV File

    I had a program on my computer to convert mpeg files to dv files so that I could burn them using IDVD. It was streaming clip or something like that. I found it on the apple website. I have looked and looked and cannot find the free download that I had before. If anyone knows were to go to get this streaming clip program, or anything that would help me achieve the same results in converting mpeg files to dv files, please let me know

    Just found my old program download at the following link. The product is MPEG Stream Type and you can find it at this site: http://www.alfanet.it/squared5/mpegstreamclip.html

  • Converting .m2t files to .mov

    How can I convert .m2t files to .mov without loosing any quality?

    Or this one, just down the page here:
    http://discussions.apple.com/thread.jspa?threadID=2044298&tstart=0

  • Cannot get any sound when playing .avi files

    Hi All
    I am running QT version 6.5.3 on Mac OS X 10.2.8 and cannot get any sound when playing .avi files but the picture is perfect.
    I have installed the following: M-Peg 2 playback component, AVI Components and AC3 component.
    Does anyone know if I am missing anything or how I can fix this?
    Many thanks
    Garry

    Download and install Perian from http://perian.org/
    You should read this support page http://perian.org/#support in case you need to delete older codecs. In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/

Maybe you are looking for