No sound when creating dvd using compressor 4

I have burned my first FCPX dvd using Compressor. The video came out well though there are no audio files. What am I not doing?

You probably didn't include the Dolby settings for your target when you were creating your Compressor job . If you use the Compressor batch templates, or if you share to DVD directly from FCX, they will do that for you automatically.
Russ

Similar Messages

No sound when playing DVDs, yet fine with bluray

my sony bluray does not have sound when playing dvds. it acts fine when using blu ray. any suggestions?

Hello jc1942_69, thank you for your message. Welcome to SONY Community!
For further assistance, please let us know with the model number of your Blu-ray disc player. As alternative, you can check the link below: http://esupport.sony.com/US/p/support-info.pl?info_id=264
However, to troubleshoot your Blu-ray disc player in a general way. Follow the steps below:
1. Turn the Blu-ray Disc player on and make sure the correct video input is selected on the TV.
2. Press the Home button on the Blu-ray Disc player remote.
3. Once the menu is displayed, press the Left arrow button on the remote and navigate to Setup.
4. On Setup, use the Down arrow button and go to Resetting and press the Enter button.
5. Under Resetting, select either Reset to Factory Default Settings or Initialize Personal Information.
NOTES:
Reset to Factory Default Settings option will display another menu where you can reset the current network, audio and video settings on the player, select All Settings if you desire to restore everything.
Initialize Personal Information will erase all personal information stored on the player and some Internet apps.
6. Go through each of the two options if you desire to completely restore the Blu-ray Disc player.
Hopefully this post helps you!

How to get UTF-8 encoding when create XML using DBMS_XMLGEN and UTL_FILE ?

How to get UTF-8 encoding when create XML using DBMS_XMLGEN and UTL_FILE ?
Hi,
I do generate XML-Files by using DBMS_XMLGEN with output by UTL_FILE
but it seems, the xml-Datafile I get on end is not really UTF-8 encoding
( f.ex. cannot verifying it correct in xmlspy )
my dbms is
NLS_CHARACTERSET          = WE8MSWIN1252
NLS_NCHAR_CHARACTERSET     = AL16UTF16
NLS_RDBMS_VERSION     = 10.2.0.1.0
I do generate it in this matter :
declare
xmldoc CLOB;
ctx number ;
utl_file.file_type;
begin
-- generate fom xml-view :
ctx := DBMS_XMLGEN.newContext('select xml from xml_View');
DBMS_XMLGEN.setRowSetTag(ctx, null);
DBMS_XMLGEN.setRowTag(ctx, null );
DBMS_XMLGEN.SETCONVERTSPECIALCHARS(ctx,TRUE);
-- create xml-file:
xmldoc := DBMS_XMLGEN.getXML(ctx);
-- put data to host-file:
vblob_len := DBMS_LOB.getlength(xmldoc);
DBMS_LOB.READ (xmldoc, vblob_len, 1, vBuffer);
bHandle := utl_file.fopen(vPATH,vFileName,'W',32767);
UTL_FILE.put_line(bHandle, vbuffer, FALSE);
UTL_FILE.fclose(bHandle);
end ;
maybe while work UTL_FILE there is a change the encoding ?
How can this solved ?
Thank you
Norbert
Edited by: astramare on Feb 11, 2009 12:39 PM with database charsets

Marco,
I tryed to work with dbms_xslprocessor.clob2file,
that works good,
but what is in this matter with encoding UTF-8 ?
in my understandig, the xmltyp created should be UTF8 (16),
but when open the xml-file in xmlSpy as UTF-8,
it is not well ( german caracter like Ä, Ö .. ):
my dbms is
NLS_CHARACTERSET = WE8MSWIN1252
NLS_NCHAR_CHARACTERSET = AL16UTF16
NLS_RDBMS_VERSION = 10.2.0.1.0
-- test:
create table nh_test ( s0 number, s1 varchar2(20) ) ;
insert into nh_test (select 1,'hallo' from dual );
insert into nh_test (select 2,'straße' from dual );
insert into nh_test (select 3,'mäckie' from dual );
insert into nh_test (select 4,'euro_€' from dual );
commit;
select * from nh_test ;
S0     S1
1     hallo
1     hallo
2     straße
3     mäckie
4     euro_€
declare
rc sys_refcursor;
begin
open rc FOR SELECT * FROM ( SELECT s0,s1 from nh_test );
dbms_xslprocessor.clob2file( xmltype( rc ).getclobval( ) , 'XML_EXPORT_DIR','my_xml_file.xml');
end;
( its the same when using output with DBMS_XMLDOM.WRITETOFILE )
open in xmlSpy is:
<?xml version="1.0"?>
<ROWSET>
<ROW>
<S0>1</S0>
<S1>hallo</S1>
</ROW>
<ROW>
<S0>2</S0>
<S1>straޥ</S1>
</ROW>
<ROW>
<S0>3</S0>
<S1>m㢫ie</S1>
</ROW>
<ROW>
<S0>4</S0>
<S1>euro_</S1>
</ROW>
</ROWSET>
regards
Norbert

Error when generating program when creating CVC using infoprovider

We are receiving the message "Error when generating program" when
creating CVC using infoprovider.
This may have something to do with the fact that we added an attribute
to the infoObject 9ALOCNO. We are getting an information message if we
run a consistency check in the POS.
We had this same issue in our development system. Here, I deactivated
and then reactivated the CVCs and this resolved the problem. However,
this is not a good solution since this is also a problem in our
production system and we do not want to deactivate the POS.
is there another option to fix this problem?
Thank you,
Rumi

Hi Rumi,
i would try these:
1. Make sure the cube is active and every thing ok there
2. Run programs /SAPAPO/TS_PSTRU_CONS_CHECK on POS and /SAPAPO/TS_LCM_CONS_CHECK on planning area respectively.
3. Check the CVC creation log in transaction /n/sapapo/mc62 for more details.

Grey screen on final burned DVD, used Compressor and DVD Studio Pro 4

Trying to create a standard dvd from a 2 hour and 8 minute 720x480 mov file. I have used compressor to create a mpeg2 as well as an ac3 audio file. After looking at other posts, I feel that what i've done in compressor is ready to be imported into DVD Studio Pro. I changed my preferences in DVD Studio Pro to support my mpeg2 and ac3 files coming in from compressor. After I import, they import very quickly. The playhead lets me scrub through the video fine, but when I go to the simulator, I get a grey screen.
I'm trying to output this file onto a dual layered Standard DVD. The fact that my video was originally an HD mp4, converted into .mov should not matter once it's converted into an mpeg2, correct? Mpeg2 is the standard DVD format.
I've also messed with the markers in DVD Studio Pro because I've read that the Automatic settings for the "break layer point" are not that "Automatic" I've seen other posters saying to add markers in the gap where the DVD laser should switch from layer to layer, but still my output burned DVD and simulator remain a grey screen!. Please help, I've referred to many posts and I believe that I've done everything right except maybe one or two things. So Close! Help! Thanks!
i

messerw8 wrote:
I changed my preferences in DVD Studio Pro to support my mpeg2 and ac3 files coming in from compressor.
What were the chamges you made?
Does the m2v file that Compressor output play OK in QuickTime?
Russ

Problem with premiere elements 3.0 (titles when creating DVD)

I am using version 3.0 and when you go to create DVD there should be the option to insert titles or menu page at the start of your DVD, well that has disappeared from my programme. We had problems with the pc so had to reinstall alot of the programmes on it but the titles never came back when we re-installed the programme. I have tried everything i can think of but there are still no titles or menus available. Any suggestions would be very welcome.

Give this a try and see if it helps.
http://kb2.adobe.com/cps/329/329802.html
Also, if you are installing on Vista, be sure to install the 3.02 update also.

Satellite 1100-Z14: I get the only picture but no sound when playing DVD's

I know mine is a fairly old notebook,but despite updating with latest firmware, I have an intermittent problem when playing DVD's (Reg 2) in that I get the picture but no sound, particularly with some older DVD's.
CD's are ok.
Toshiba repair agent says it is a software problem and they only deal with hardware problems.
Can anyone tell me how I can deal with this problem please ? ( apart from getting a later model ! )

I think I may have stumbled on the problem, I use IntervideoDVD7 and under audio effects there is an option
'Sydney Theatre' etc, I changed it to 'off' and the sound cames back. maybe I should study their manual a bit more !

No sound when playing DVD video

Hi,
I have a K8T NEO2-FIR, Win XP pro. Basic system runs just fine. I have installed an LG DVD-ROM drive model GDR-8163B. When I play a DVD video there is no sound at all. On the other hand, there is sound when playing a music CD. I am using the on-board sound (no additional sound card installed).
I must be missing something pretty basic. Any guidance would be appreciated.

...sounds like you need to configure the DVD playing software (PowerDVD, WinDVD, WMP, etc.)...

Vendor not intended when create SC using create limit item

Hi All,
This is a challenging issue for all of us...
SRM : 5.0
ECC : 6.0
I am facing the problem when creating the Shopping cart..
When i click on Centralized purchasing -- > Shop -- > Create Limit item
and give the Desc, Product category, Value limit, Expected value, Date between, Supplier and Follow-up actions as Confirmation and Invoice and account assignment as Known and click add to shopping cart..
It is giving a message vendor not intended for purchaing org.. in the Item under Good/Service field value LIMIT is getting created automatically.. I dont understand how it is getting created..
If i try to create one more item and specify the Good/service as our custom field value , for this item there are no error and
no message saying Vendor not intended for Purchasing organization..
Please help me in finding out the issue.So that will be greatful to you..
Advanced thanks
Points will be rewarded..
Regards
Raju

Hi Teja,
I agree with you answer..
When i tryo to create SC using the Product which are repliacted from ECC to SRM.. I am able to create SC successfully. That means vendor is properly intended to the Porg and Pgrp right...
When i click on Centralized purchasing -- > Shop -- > Create Limit item
and give the Desc, Product category, Value limit, Expected value, Date between, Supplier and Follow-up actions as Confirmation and Invoice and account assignment as Known and click add to shopping cart..
It is giving a message vendor not intended for purchaing org.. in the Item under Good/Service field value LIMIT is getting created automatically.. I dont understand how it is getting created and Product type is neither a Material nor service.. The product type field vale is blank....
Please help me in finding out the issue.So that will be greatful to you..
REgards
Kumar

Receive 'runtime error: Unknown exception' w/99% processed when creating DVD from movie

Hi,
I have tried several times to create a DVD of a movie with several Scene (w/Stop) Markers only to receive 'runtime error: Unknown exception' with 99% completion.
I'm using Adobe Premiere Element 11 ver 11.0 (20120901.B261.425551).
I'm running Windows 7 Ultimate w/SP1 on a Dell XPS M1530 w/4GB Memory
I have created DVDs in the past with little or no problems.
Would appreciate any help with my problem.
Thanks...

Harry
Thanks for the additional information.
Typically, if you are doing a multi movie Timeline and you want the viewer to be able to navigate to a specific movie followed by return to main menu, then:
Main Menu Marker at beginning of movie 1 and Stop Marker at end of movie 1....then gap of at least 12 frames...Main Menu Marker at beginning of movie 2 and Stop Marker at end of movie 2....and so on. But for the last, remember no Stop Marker at the end of that last Movie on the Timeline.
With those 25 .mts video clips, are you sure that you want or need all those return to main menu possibilities.... a scene marker at the beginning of each and a stop marker at the end of each for a return to menu after each of the 25 video clips? Especially if these are small video clips.
Large project...
Keep in mind that the DVD disc 4.7 GB/120 minutes is in reality 4.3 GB capacity. So as you can tell my the program's lowering of the Bitrate (8.00 to 7.97 Mbps), the program is trying to make the fit by lowering the bitrate. Depending on how your troubleshooting goes, you may want to start thinking about DVD Double Layer Disc (8.5 GB/240 min) if your project gets much larger. In the case of the DVD double layer, 8.5 GB is in reality 7.3 GB. Typically, lower the Bitrate, the lesser is the Quality of the end product. So you do not want to force the program to lower the Bitrate to low to make the fit.
As for the Timeline - + slider to which I referred...
In the above screenshot, please note in the right side of the Premiere Elements 11 Timeline (Expert view)...from left to right at that location,
the Render Button
the icon named "Fit to Visible Timeline
the icon named Zoom Out ( - ) which is related to the slider to its right
the icon named Zoom In ( +) which is related to the slider to its left
That slider is moved by either of those icons or by moving the circular button of the slider with the mouse curser.
We will be watching for further developments.
Thanks.
ATR

How to set plant to all WBS when creating Project using Copy Standard Project (CJ20N)

Hello
I have created standard project with several WBS. Now I want t o create operative project in CJ20N by copying standard project. While copying I want that the system allows me to define the plant for which the project is created and it gets automatically copied to project defination and all WBS elements. Since I have around 30 plants, I havent maintained any default plant in Standard project. How I can achive this requirement to specify the plant when creating project so that it is automatically copied to all WBS.
Murad

Hi Murad,
I can see three viable options over here. If you are using the same plant across the project structure (on all the WBS elements) you can then go with the suggestion Saurabh suggested (Defaulting it in the project profile itself). In addition to writing a substitution rule at the PD level, you can also go ahead with the option of mass change in case you have created a project(by copying from an operative project already with some default plant.)? Is something stopping you from carrying out mass change? Please let me know.
Thanks
Varun

Odbcad32.exe errors when creating DSN using 9i client and 9.02.00.65

Hi,
I am about at the end of my rope. I have a brand new Windows xp sp2 machine. I have tried installing, uninstalling deleteing all registry keys, deleting directories, installing the full 92010NT_CLT then installing just the run time, then installing different ODBC drivers - from 9.018 - through 9.2.065 - I have been through the message that I needed a newerr version of the OUI etc etc, I finally found a thread that led me to to ODAC92070 which then I installed - geez!
ALL these configurations resulted in ODBC crashing when creating a DSN! weak! In just about every situation that I had the patience to test TOAD it worked fine - however from the command line SQLPLUS would crash too when connecting - even the MS Driver works sort of - in most situations. What in the world do I need to do to get the ODBC Administrator to not crash when creating an Oracle DSN.
Thanks
Jerry

Hi,
I am about at the end of my rope. I have a brand new Windows xp sp2 machine. I have tried installing, uninstalling deleteing all registry keys, deleting directories, installing the full 92010NT_CLT then installing just the run time, then installing different ODBC drivers - from 9.018 - through 9.2.065 - I have been through the message that I needed a newerr version of the OUI etc etc, I finally found a thread that led me to to ODAC92070 which then I installed - geez!
ALL these configurations resulted in ODBC crashing when creating a DSN! weak! In just about every situation that I had the patience to test TOAD it worked fine - however from the command line SQLPLUS would crash too when connecting - even the MS Driver works sort of - in most situations. What in the world do I need to do to get the ODBC Administrator to not crash when creating an Oracle DSN.
Thanks
Jerry

Header data not coming from vendor master when creating SA using BAPI

Hello,
I am creating SA using BAPI_SA_CREATE. I am passing the vendor code and other header related data in the header table of the BAPI.
SA is created successfully with all the data that is passed to the BAPI. Now if the payment term and inco terms data is passed initial to BAPI then this data is not taken from vendor master. This data appears blank in SA.
Shouldn't this data be picked up from vendor master as they are maintained properly in vendor master?
I just need confirmation whether BAPI picks or not from vendor master if the data (payment term and inco terms) passed is initial.
Thanks and Regards,
Saba

Hi,
Are u passing X to corresponding fields of HEADER structure what ever you have populated in HEADER structure .

Javax.management.InstanceNotFoundException: com.oracle.jps:type=JpsCredentialStore when creating credential using Credential Store Framework

Hi,
I have a WebLogic 11gR1 installation (on Windows Server 2012 with Oracle backend) and is trying to create credential using Credential Store Framework following steps described inhttp://www.redheap.com/2013/06/secure-credentials-in-adf-application.html
I tried to do it with WLST (from under Oracle\Middleware\oracle_common\common\bin) and get the following error:
wls:/WcsDomain/serverConfig> createCred(map="ClayTablet.Sample",key="TestKey",user="TestUser",password="blah",desc="Test Key");
Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
For more help, use help(domainRuntime)
COMMAND FAILED due to an unknown reason, Check the stack trace for details
Traceback (innermost last):
File "<console>", line 1, in ?
File "C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\jpsWlstCmd.py", line 522, in createCred
File "C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\jpsWlstCmd.py", line 504, in createCredImpl
        at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
        at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
        at javax.management.remote.rmi.RMIConnectionImpl_1036_WLStub.invoke(Unknown Source)
        at weblogic.management.remote.common.RMIConnectionWrapper$16.run(ClientProviderBase.java:918)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java: 146)
        at weblogic.security.Security.runAs(Security.java:61)
        at weblogic.management.remote.common.RMIConnectionWrapper.invoke(ClientProviderBase.java:916)
        at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:993)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
javax.management.InstanceNotFoundException: javax.management.InstanceNotFoundException: com.oracle.jps:type=JpsCredentialStore
Thanks,
Yu
P.S. I was using WLST command under Oracle\Middleware\wlserver_10.3\common\bin to do the same and got a different error NameError: createCred and posted a question about that under How to create credential in Credential Store Framework?
After searching for the same error message in the community I tried to switch to WLST under Oracle\Middleware\oracle_common\common\bin and got the error posted here.

After extending my domain with JRF and JRF WebService Asynchronous services, I was able to execute "createCred" and "listCred" and so on.
Yu

My sound mix does not sound the same after using Compressor for DVD

Hi,
Is there something I can do to maintain the sound mix of my original file when converting to the dolby in Compressor. It needs to be louder overall and sometimes the music goes way too low and the dialogue goes to soft. Sound effects were louder and now get quiet during some parts.
Help?
Thanks!

Hi:
You must do some changes in the standard AC3 preset from Compressor. Duplicate it, and chage the following settings:
- Dialog Normalization: -31
- Compression Preset: None
Save it and try it. You must get the same mix and level than your original.
Hope that helps !
Alberto

No sound when creating dvd using compressor 4

Similar Messages

Maybe you are looking for