No sound when i copy audio in logic

When i record, say a synth in audio, and copy the sounds across to the bars, there is no longer any sound for that audio! the audio did work when i did the original recording. Its just when i copy the audio across. Any help please?

If you copy from a midi track to an audio track you will not hear anything. Be sure not to have automated the volume to zero on the destination point.

Similar Messages

  • My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails. What is wrong with it?

    My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails, even works fine with headsets. What is wrong with it?

    well i'd seriosly say point a hot hair drier at the speakers as water has entered the phone most commonly via the home button but avoid getting it too hot let it cool every 3 minutes after constant drying. Don't worry I have honestly dont this with my iPhone 4 GSM 16GB. For future reference avoid letting it get wet.

  • No sound when rewiring ableton live and logic 8

    my setup:
    MacBook Pro 15"
    Intel Core 2 Duo
    2.33 GHz
    Single Processor
    2 Cores
    L2 Cache (per processor): 4 MB
    2 GB RAM
    Bus: 667 MHz
    what i'm doing:
    i start logic 8.0.1
    then i start ableton live 7.0.1 and load a test song with an audio loop in it
    in logic, i make a new track, logic clearly shows that rewire tracls from ableton live are available (looks like this:)
    http://thumpmonks.com/jams/newtrack.png
    i hit play in logic, the song starts in both logic and live, the meters in live show audio activity, but there's no sound in logic.
    the channel in logic reads bus 33:
    (looks like this)
    http://thumpmonks.com/jams/track.png
    I turn input monitoring off/on. no change. i make the track stereo, still nothing.
    to make sure im not crazy i make an audio instrument in logic using evb3, or evp88, whatever and i hear it just fine.
    in live ive tried everything: directly routing the active audio track to the Rewire output, routing the master output to a different bus and matching that bus in logic.
    no sound. anyone?
    Message was edited by: Brian Gocher

    Hi
    May be - Full HD - is Your problem.
    There should be a minimum of 25GB free on start-up hard disk.
    Yours Bengt W

  • Can't get sound when using M-Audio Fast Track

    I'm using Logic Express 8 and just purchased the M-Audio Fast Track Pro interface so I can plug in my guitar and mic to Logic. I downloaded the driver, the device shows up in Logic, I can even record with it, but I can't hear anything on playback! Not only can't I hear the Fast Track, but I can't hear any of my other (software) tracks either. I can't input monitor at all. But, as soon as I unplug the device, suddenly all my tracks are audible again (including recordings that I make through the device). What's going on? I need to be able to hear what I'm doing!

    Go in to Audio midi setup and make sure the default input and output are the M-audio devise ... if you have not done so already .

  • Clicking Sound When Listening to Audio iPod Nano 6th Gen

    When I am listening to a few tracks on my iPod Nano 6th gen, there is a faint clicking sound that I can hear throughout the songs. The songs play fine on my PC with no clicking sound, but only on the nano can it be heard.

    Repair permissions and restart your computer.

  • No sound when playing an audio clip from a website

    I'm trying to play an audio clip on a website. The site shows that the clip is playing, but I have no sound. My speakers are on and none of my volume mixers are muted. I played a clip from a different website and had sound. I spoke with Customer Service for the website where I'm not getting sound, and they tried playing the same clip on their computer, using Firefox, and it played the sound. I also tried playing a different clip on the same website, but again didn't have sound.
    I'm using Firefox 16.0.2 on Windows XP

    You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
    You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
    Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process.<br />
    You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound.
    See:
    * https://support.mozilla.org/kb/No+sound+in+Firefox
    * https://support.mozilla.org/kb/Video+or+audio+does+not+play
    You can clear the Flash local storage and settings if the Flash player is involved.
    *Windows Control Panel > Flash Player > Storage: Local Storage Settings
    **Remove a specific domain: Local Storage Settings by site
    **Remove all domains: Delete All and Delete Data
    Flash Website Storage Settings panel:
    *http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
    Global Storage Settings Panel:
    *http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html

  • How to record video or use screen capture WHILE capturing audio from Logic??

    Hi,
    I want to record my self playing guitar and singing using my mac book pro built in camera. I want the audio to come from Logic so I can add whatever effects I want to the vocals. When I say audio from Logic I don't mean recording in Logic and adding it in post. I want it to be on the fly.
    What I used to do was use the screen capturing program Snapz Pro. I would screen capture a box around photobooth for the video, and then record while having Logic's audio in the background. It screen captures my entire computers audio. So for example if I get an aim message the bleep would show up in the recording. Or if I raise the volume or lower it the little click sound fx would be in it as well.
    Capturing the audio this way let me get Logic's audio effects in my video on the fly. It worked out great....until now! :/
    I just got the audio interface "Duet 2". And am using a microphone instead of my mbp's built in one. When ever I tried to record and capture my systems audio - my entire computer would crash. Snapz Pro won't work with the system audio with the interface. It works fine without it though.
    I then tried to use Quicktime's new movie recording feature. I see it only gives an option for microphone and now system audio. So I got soundflower to re route the audio but that doesn't help either. This is because when you capture this way you can't hear anything while your capturing. So if I were to record a video and wanted Logics audio in it, I would have to set the output to Soundflower first. So when I record I cant hear myself which defeats the purpose.
    So my final question is, how can I record video while having Logic's audio? I don't need to record with the mic, because in Logic the mic audio is going thru the system audio with everything else.
    I would like to use a process more similiar to Quicktimes straight movie recording instead of doing an odd way like I used to screen capturing a box around the photobooth screen.
    Thanks

    use Yawcam from Yawcam.com

  • Copied audio region doesnt play!

    Hi
    Heres my problem that I just cant figure out why logic behaves like that...
    http://argohoo.com/Kuvat/logic_comp.jpg
    So, I´ve recorded normally and different takes shows up on takes list... after several takes I copy a part of audio from another location on top of those takes and thats what happens... the copied audio doesnt play, its the latest recorded audio-take that plays....

    "Mute either one of them and the unmuted one will play. One Audio object ( an Audio track) can only play back 1 Audio file at once."
    Yeah, of course but shouldnt Logic automatically mute all other audio files other than the latest, just like it does when you overbud, it doesnt leave previous audiofiles "active", it mutes all other besides the latest take! Why it doesnt mute older takes/files/regions when I copy audio... I guess thats not how it supposed to work!
    Oh well, it may be a temp bug ´cause when I tried same thing (on same session though) on other location... [recorded several takes and then copied audio on that same location] it worked like it was supposed to, copied areas were muted on all the other regions/takes underneath it!
    Or course I can adjust and mute and demute takes later but the point is that it should automatically always play the region thats on top of everything else if not adjusted/muted etc on takes!

  • I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

    i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating.  Can one download old version still ? or can you run both versions on OS10.9.5 ?

    Ok, either my question was too long or nobody seems to have an answer. Sad, either way
    Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
    When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
    Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
    Two questions, every idea would be great!
    - Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
    - Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
    Thank you again,
    Joern

  • I recently got new mac air and transfered my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record shows its recieving sound from software inst. but no sound. I checked audio preferences OK

    i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating.  Can one download old version still ?
    thanks,

    Ok, either my question was too long or nobody seems to have an answer. Sad, either way
    Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
    When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
    Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
    Two questions, every idea would be great!
    - Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
    - Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
    Thank you again,
    Joern

  • Unwanted sounds when logic plays from the start of the track!!! help!!

    i would really appreciate if anybody helps me here!
    i have logic rewired with reason. i have numerous tracks and instruments on both
    all my drums are in reason and when i play the tracks back in logic i get an unwanted kick and a crash at the point i start the song, this happens anywhere between the count in and the first audio in logic.
    whe i play it back from the start in reason i dont get these sounds, only when i play it from logic!
    there is definately no loose midi data in reason(as there is no place for it ) and i have had draw a long count out in logic just so the track starts after these sounds have faded away?
    any advise???

    Correction:
    This has happened to me lots too, to sessions where I am using a lot of virtual instruments. I don't think you issue has anything to do with ReWire.
    I think it has to do with stopping a song before it ends, returning to the start and playing song again. It has to do with lookahead and ram etc ....
    The way to avoid this is to back your song start up, or nudge your tracks forward a bit. One bar or less seems to do the trick for me.
    Hope that helps.
    Cheers
    Dee

  • No sound when i import garage banmd files into logic express 7.1

    i have garage band 3.0.4 and logic express 7.1. i just acquired both of these recently and have been trying to transfer my old garage band 2 files into LE. i have no problems putting my songs into garage band 3 but when i open them in logic theres no sound output. everything appears to be working, all the meters light up except the output master all the way at the end of the mix window. i dont get it. some of my GB2 files opened in LE with no problems but others, made with gb3 or exported from gb2 to gb3, wont work. i messed with the preferences, the sound is set to core audio but im still perplexed. anyone else had this problem? help!

    thanks, ill give it a try. ive noticed that i dont have any problems when i open my GB2 files directly into LE. its only when i go through GB3. its really a drag, because i just updated and it seems theres no going back. pretty disappointing if you ask me. i updated to GB3 because of its much hyped "resolutions" of old problems, and here i am stuck with new problems. bah! thanks for the help anyway. if anyone knows of an easier/more efficient way to deal with this issue, let me know! thanks again.

  • Loose sound when fuzzy logic 4 is used

    hi everyone
    when i run fuzzy logic 4 in turbo mode i loose my sound, my mainboard is the MSI 845gmax with a 1.8 pent 4 with 1 gig of ddr2100, i have the ac97 audio,i did upgrade to all current drivers,i only loose the sound when fuzzy is in turbo mode to overclock,any help on this one?

    The timing control for onboard sound and onboard video is taken from the pci bus as well as any card that are inserted.  When you overclock the fsb you also overclock the onboard sound chip as well.  At some point this chip can not keep up and fails.

  • After I updated my iPhone 5 to iOS7 I can no longer see the individual chapters when playing my audio books.  Also I can't edit and copy multiple text messages.

    After I updated my iPhone 5 to iOS7 I can no longer see the individual chapters when playing my audio books.  Also I can no longer edit a and copy multiple text messages like before. Is there a way to do these things I am missing?

    Not only can i not see the individual chaptes -- apparently like you and everyone else suffering through the "improved" iOS7 -- when my audiobook repeats a "file" within  chapter, which it sometimes does, I cannot get "inside" the chapter and move forward to where I'm supposed to be.
    Whatever happened to "if it ain broke.......???

  • I no longer have sound when playing my clips through adobe premiere elements 12. How to I correct this problem? I have checked all audio levels and there is no mute on etc. I have updated to 12.1. Still no sound.

    I no longer have sound when playing my clips through adobe premiere elements 12. How to I correct this problem? I have checked all audio levels and there is no mute on etc. I updated to 12.1, but still no sound in any clips. Even not on old files which used to work.

    bfun
    What computer operating system is your Premiere Elements 12/12.1 running on? Can we assume that this audio plays back OK
    on the same computer when you are using a computer player independent of Premiere Elements?
    What are the properties of these clips that worked before but do not know with regard to sound
    For now, I will assume that you are working on Windows 7, 8, or 8.1 64 bit.
    Have you checked the Edit Menu/Preferences/Audio Hardware ASIO settings? Do you have any 3rd party audio devices incorporated in your computer environment?
    Please delete the Adobe Premiere Elements Prefs file and, if that does not work, then the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. The Windows 7, 8, or 8.1 64 bit path is
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    12.0
    and, in the 12.0 Folder, is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Make sure that you are working with Folder Option "Show Hidden Files, Folders, and Drives" active so that you can see the complete path cited.
    Do you have installation files or installation disc with the purchased serial number in case we need to resort to uninstall/reinstall?
    We will be watching for your follow up.
    ATR

Maybe you are looking for