No sound when i import QT DV movie into FCP

I downloaded some .mpeg movies from a site and exported them from QTP as DV NTSC movies. When I open them in FCP I get no sound. There is not even a sound clip when i drag the video into the sequence. They play in QT perfectly. Thank you for your help.

I used the m2v and aiff file conversion choice in mpegsreamclip. The m2v file will not play in FCP however the aiff file will. I converted the m2v file in QTP to a DV file but then i have to place this over the m2v and aiff files in the FCP sequence. So essentially the problem is solved. However is there any way to join the files to clean this up or should I have used a different choice in mpegstreamclip?

Similar Messages

  • No sound when i import garage banmd files into logic express 7.1

    i have garage band 3.0.4 and logic express 7.1. i just acquired both of these recently and have been trying to transfer my old garage band 2 files into LE. i have no problems putting my songs into garage band 3 but when i open them in logic theres no sound output. everything appears to be working, all the meters light up except the output master all the way at the end of the mix window. i dont get it. some of my GB2 files opened in LE with no problems but others, made with gb3 or exported from gb2 to gb3, wont work. i messed with the preferences, the sound is set to core audio but im still perplexed. anyone else had this problem? help!

    thanks, ill give it a try. ive noticed that i dont have any problems when i open my GB2 files directly into LE. its only when i go through GB3. its really a drag, because i just updated and it seems theres no going back. pretty disappointing if you ask me. i updated to GB3 because of its much hyped "resolutions" of old problems, and here i am stuck with new problems. bah! thanks for the help anyway. if anyone knows of an easier/more efficient way to deal with this issue, let me know! thanks again.

  • I am not being able to play sound when I import a .MTS file from my folder

    I am not being able to play sound when I import a .MTS file from my folder on my sequence bar of my Premiere Pro CS6. Even if I use my Media Browser to import the file, the video plays fine, but the audio is disabled it seems. I don't know what to do since I have used .MTS files before without hassle on CS5.5. It is quite frustrating. What can I do?

    Hi debesh05,
    Please mention the Operating System that you are using and also make and model of the Camera that was used to capture those clips. Also, try to make another folder with the same name in the same location where the .MTS files are and move all the clips into the new folder and then try to import the files again using Media Browser in Premiere Pro CS6. If this doesn't work then make a copy of one file and rename it as .M2TS and then import that single file into Premiere Pro CS6. Please update if either of the solution works for you.
    Regards,
    Vinay

  • My podcasts do not show the pictures only the sound when I import them to iTunes from Garage Band.  How do I get the pictures to show up in iTunes?

    My podcasts do not show the pictures only the sound when I import them to iTunes from Garage Band.  How do I get the pictures to show up in iTunes?

    Well, all I can tell you is that if your file is an m4a with chapter markers, those markers having suitably sized images attached, and you drag it into the Music area of iTunes (so that it appears as a song) in List view, when you play it and then command-click on the small image in the header (next to the progress bar) you should see your embedded images.
    If this isn't happening the best place to ask would be in the GarageBand forum: my own experience of GB is rather out of date and in any case I've never used it for podcasting.

  • When I import audio and move it into my timeline the project will no longer play?

    When I import audio and move it into my timeline the project will no longer play?

    The audio is a .wav file created in Audacity.
    The OS is Windows XP
    The verison is CS4
    I have included images of the Sequence settings and the playback settings because I was not sure what information you would need.
    I am not sure what you mean by waiting for the Audio to conform but I know I have imported the audio and gone back the next day and tried to place it in the timeline and it still did not work.

  • How to import Powerpoint movie into FCP

    I have a powerpoint slideshow from a client and am needing to import it into FCP. In PPT I saved it as "Make Movie", and sought to import as .mov into FCP. When i try to open it, I get error , message, "Out of Memory." I have 27 GB of memory on the main drive, and the file is only 49MB. Any help would be appreciated.

    First find a sharp object, then look for the soft spot on the inside of your wrist...
    or if you must,
    Export each slide as a still file and rework them in Motion. You probably need to set them on a background because NO ONE EVER build powerpoint for text safe in video.
    TonyTony

  • How do I include a drop shadow effect when I import an Illustrator vector into Edge Animate?

    How do I include a drop shadow effect when I import an Illustrator vector into Edge Animate? It should be noted that I also have another effect (an extrude & bevel) applied which does copy over when I paste (or create an SVG and import) into Edge Animate. Any thoughts on why the drop shadow disappears but the extrude & bevel carries over?

    Which version of Illustrator are you using?
    In earlier versions of Illustrator it is not that easy to apply drop shadows with spot colours.
    Another reason why it's always important to tell which version of AI … well …

  • Can we import a Director movie into Flash ?

    I'm exploring a possibility of importing a Director movie into Flash or if it is possible to import a published Director movie into Flash.
    Anticipating your reply....
    Thanks,
    -Mithun

    As I may have mentioned in the other thread where you asked this, No.  You can not.  You can import a flash swf into Director but you can not import anything from Director into Flash.

  • I imported a quicktime movie into imovie and want to export it to idvd and it is grayed out

    I imported a quicktime movie into imovie and want to export it to idvd but the menu comes up gray, what do I need to do first?

    Hi
    And if You
    Share to file - and as 480p - then drop this file into iDVD bigMenu window (avoiding dropzones) - You get an even better result.
    other res gives problems.
    Yours Bengt W

  • Import an MP4 movie into my event library...

    I'm trying to import an MP4 movie into my event library...all I get is the audio with black thumbnails. What am I doing wrong?

    Sorry I couldn't help.
    Here is one idea. Get MPEG Streamclip from Squared 5. It is free.
    Open MPEG Streamclip. Drag your MP4 file into MPEG Streamclip.
    Use FILE/EXPORT TO QUICKTIME...
    For Compression, choose h.264.
    Leave everything else the same.
    Then try to import the resulting file into iMovie, same as before.
    If it still does not work, try it again and this time choose Apple Internediate Codec for compression.
    This should produce an MOV file with h.264 inside (or AIC inside).

  • When i import my AutoCad PDF into photoshop my lines and text become blurry. How do i fix this

    When i import my AutoCad PDF into photoshop my lines and text become blurry. How do i fix this?
    Is it resizing as I import it  or maybe a printer thing?

    It is rasterizing the PDF at the resolution you tell it to, unless it's an image only PDF - then the image will be opened as-is.

  • How to get quicktime movie  into FCP X?

    how to get quicktime movie  into FCP X?

    What exactly are you trying to do that using the import files function won't accomplish?
    Russ

  • Importation of VOB files into FCP

    I have been importing .VOB file into FCP on a Mac Pro 8 core without any problems. Last week I bought a MacBookPro 3.06 Core 2 Duo and I reinstalled the OS and used system migration to import the programs from my Mac Pro.
    The MacBookPro will NOT open import the VOB file into FCP. Apple support said that VOB files are not supported. They suggested the power difference between the two computers allowed import in one and not the other. This does not make sense to me.
    Any thought from the experts?

    I've never known any version of FCP to work with VOB files natively or otherwise. Most people use MPEG Streamclip to convert to the format that will match their FCP Sequence settings.
    -DH

  • No Sound when converting MPEG file to MOV - Quicktime Pro

    Hi Everyone,
    Just got my first Mac (MacBook Pro) which I love but I'm having a problems importing MPEG 4 files from my Sony digital camera. They play fine through quicktime in the sony format but when I import into quicktime (or imovie for that matter) then export in a .mov file all the sound is lost.
    I see some people have reported problems with sound similar to mine but none appear to be the same?
    Any ideas??
    Many Thanks
    Wes
    Ps Running all the latest updates..
    MacBook Pro   Mac OS X (10.4.7)  

    I am having a similar problem and I see this was never persued any further. I am trying to convert an mpeg file to a mov file using quicktime pro. When I do there is no sound.
    Movie info for mov file is: Format is H.264 Decoder, 320 x 240, Millions, FPS is 15, Data Rate is 256.21 kbits/sec.
    Any help would be greatly appreciated. I'm new to quicktime and frustrated from spending hours trying to figure this out! Thanks in advance!

  • Why do I not have sound when I import a M2TS video file into LR4? ?

    I have M2TS video files stored on my computer.  When I import a file into LR4, I have no sound.  I also tried importing files directly from my Sony camcorder, but still have no sound.

    How many sound channels does your video have?
    Lightroom does not support 5.1.
    http://feedback.photoshop.com/photoshop_family/topics/no_sound_audio_when_playing_mts_vide o

Maybe you are looking for

  • Can I use the Apple VGA to DVI adapter to connect a PC to a DVI monitor?

    Hi Any idea of the Apple VGA to DVI adapter would work to connect a PC's VGA output to a DVI monitor? Is it a simple pass through?  Or are there drivers needed.

  • Installing Windows XP on Satellite L40-114

    I just bought a Satellite L40-114 for home and education. I just found out I need windows XP for some scientific applications and the VPN software for access, so I tried to install it. I was really disappointed Toshiba does not seem to deliver XP dri

  • Hyperion Workspace issue - Scrollbar Missing on Workspace 11.1.2.0.00

    Hi EPM Experts, I am having problems with the Workspaces scrollbars. They are vanishing without no reason. Only temporary resolution is to restart the services, but it is recurring issue. Any hints to FIX this issue will be highly appreciated. Thanks

  • To Load Balance or Not to Load Balance? ISE and F5 Big IP

    Currently my team is debating whether to put our two ISE appliances (PSN nodes) behind our F5 load balancing deployment.  Our network is relatively small in size (5K users) with a small wireless deployment (4 Cisco controllers with 300 Access points)

  • Problem in editing tjspGenerateEditForm.jsp

    Hi all, I have a problem: What I want to do is when an admin user who is a member of an admin users group and tries to edit a users informations, all the fileds can be seen. But for any user except member of this administrators group, the fields shou