No sound when i import video

I have a video file that has sound when i play it in VLC but when i import it their is no sound in premiere

Hi jkakopian,
Please refer to the link provided below.
If thw link doesn't help then make a copy of 1 file and rename it as .m2ts and try importing it.
http://helpx.adobe.com/premiere-pro/kb/audio-video-glitches-avchd.html
Regards,
Vinay

Similar Messages

  • I am not being able to play sound when I import a .MTS file from my folder

    I am not being able to play sound when I import a .MTS file from my folder on my sequence bar of my Premiere Pro CS6. Even if I use my Media Browser to import the file, the video plays fine, but the audio is disabled it seems. I don't know what to do since I have used .MTS files before without hassle on CS5.5. It is quite frustrating. What can I do?

    Hi debesh05,
    Please mention the Operating System that you are using and also make and model of the Camera that was used to capture those clips. Also, try to make another folder with the same name in the same location where the .MTS files are and move all the clips into the new folder and then try to import the files again using Media Browser in Premiere Pro CS6. If this doesn't work then make a copy of one file and rename it as .M2TS and then import that single file into Premiere Pro CS6. Please update if either of the solution works for you.
    Regards,
    Vinay

  • No sound when I play videos with windows 7 on compaq presario cq57 laptop

     I have no sound when I play videos with the windows 7 system . I had sound with videos with my old laptop that had windows vista. that I put on a fladsh drive and new videos that I have taken with my  smart phone  HTC sprint hasno audio
    I went through the process   that my laptop said to do to get sound but doesn't work

    thank you for the information . I have gone through the what the HPsupport says to do . It didn't work .
    I should have been more clear . I have sound on my lap top .
    I dont have sound when I import a video that  I recorded with my   sprint HTC smart phone.
      Iwill have the audio when Iuse the playback on my phone,then when it is import on to my lap top
      Iwill not have any audio at all with my video on play back.
     it seems that any  personal video will not haveaudio even from the flashdrive that I have videos stored on and
    I know that it did when  I had my old laptop which was a compaq presario v6500 that used the window vista program.
       again I have audio on the laptop   . Ihave no audio when Iput personal videos on my lap top  It is just the Personal videos Ihave this problem with

  • My podcasts do not show the pictures only the sound when I import them to iTunes from Garage Band.  How do I get the pictures to show up in iTunes?

    My podcasts do not show the pictures only the sound when I import them to iTunes from Garage Band.  How do I get the pictures to show up in iTunes?

    Well, all I can tell you is that if your file is an m4a with chapter markers, those markers having suitably sized images attached, and you drag it into the Music area of iTunes (so that it appears as a song) in List view, when you play it and then command-click on the small image in the header (next to the progress bar) you should see your embedded images.
    If this isn't happening the best place to ask would be in the GarageBand forum: my own experience of GB is rather out of date and in any case I've never used it for podcasting.

  • When I import video and place it into timeline as a raw file with no fx or any added processing I get the message that the video is unrendered and therefore it doesn´t playback?

    When I import video and place it into timeline as a raw file with no fx or any added processing I get the message that the video is unrendered and therefore it doesn´t playback?

    FCE can use DV or AIC video formats natively.  Any other format will need to be converted to one of those two if you want to avoid constant rendering.  The clips you use must match the Sequence settings.
    -DH

  • PSE13: no sound when playing AVCHD videos

    In the PSE 13 Organizer I'm not getting any sound when playing AVCHD files:
    These files play just fine in PSE12
    These files play just fine in Premiere Elements 13 and 12
    The files are from various cameras (Sony RX100M3, Sony and Panasonic camcorders)
    Other video formats work fine (e.g., .wmv, .mov files from an iPhone, .avi etc)
    Any ideas? A quick search indicates this problem has occurred occasionally over the last several years across various versions of PSE.
    Thanks

    Hi Anewsha
    I use .mts.
    To clarify : The problem occurs in the organizer part, where sound
    disappears after palying 30 seconds. I run a fairly powerful computer, Core
    i7, 16 G Memory with NVIDIA GeForce GTX 750
    BR Ulf
    2015-02-11 16:02 GMT+01:00 yossi000 <[email protected]>:
        PSE13: no sound when playing AVCHD videos  created by yossi000
    <https://forums.adobe.com/people/yossi000> in Photoshop Elements - View
    the full discussion <https://forums.adobe.com/message/7184570#7184570>

  • When I import video from my iphone to imovie it doesnt look right, it makes everyone look wider and shorter. Is there a way to fix this?

    When I import video from my iphone to imovie it doesnt look right, it makes everyone look wider and shorter. Is there a way to fix this?

    This is close.  I did a bit more digging I have found a few more things.   It appears that the input dialog is a read once on connect and then it never updates.  I had my iPhone connected to my Mac when I did my convert from FILMiC Pro to my Camera Roll.  Just on a whim, I dissconnected my iPhone with FCPX open and then connected it again.  This time when I opened up the Import window the movie I converted showed up.   It appears my issue may have simply been related to the specific series of operations that I happened to use at the time I was trying to perform an import to FCPX.
    One last item of note.  There is a movie in my Camera Roll that FCPX still does not see.  This was a movie shot by my son-in-law of my grandaughter on his iPhone and then it was sent, via message, to my iPhone.  Obviously it is a highly compressed video of unknown compression and frame rate.   Regardless, FCPX does not see this video.  I'm guessing it is not a .mov quicktime file but some other format specific to imessage video.
    Thanks for the help Russ.  It at least pointed me in the right direction.  I understand why no one else could comment as I'm guessing no one else has had an issue.  A very subtle "feature".

  • When I import videos taken with my iPhone 4S to my Windows PC some of the landscape videos are upside down and all of the portrait videos are rotated 90 degrees.  It makes a difference depending how I hold the iPhone when taking videos.  Help!!!

    When I import videos taken with my iPhone 4S to my Windows PC, some of the landscape videos are upside down and all of the portrait videos are rotated 90 degrees.  It makes a difference depending on what position I hold the Iphone when taking videos.  Help!!!!

    Sometimes syncing will have problems with very large video files like this.  I'm not sure you will be able to overcome this, but if the videos are important enough you may consider purchasing 3rd party software such as Touch Copy to transfer them.

  • When I import video clips, why are they only recognized as audio clip? [was:Question]

    When I import video clips, why are they only recognized as audio clip?

    Please do not post the same question twice http://forums.adobe.com/thread/1450571?tstart=0
    If you are using Premiere Pro, you need http://forums.adobe.com/community/premiere?view=discussions
    If Premiere Elements, you need http://forums.adobe.com/community/premiere_elements?view=discussions
    If some other program, post the name of the program

  • No sound when accessing internet video (i.e. youtube, Skype, flash, etc)

    No sound when accessing internet video (i.e. youtube, Skype, flash, etc).  It says I am missing a driver but not sure where to get it without paying $30 for something that shouldnt be missing in the first place.

    Hi,
    Try the following.
    Download and install Firefox and then using Firefox, download and install the latest version of Adobe Flash.
    Close all browser windows before running the Flash installer.
    Launch Firefox and see if the videos play Ok - if they do, close Firefox, open IE and click on the same Adobe Flash link above to get a prompt to install the ActiveX component.  When done, restart IE.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • When I import video, the video have ridges in the picture

    When I import video from my Sony HDR CX-190 cam corder to the mac, I now have ridges, or small squiggly waves in the picture.  Anyone experience this

    Thanks Mike  - I actually didn't realize that there's a connected USB cable tucked into the strap and connected to the camera.  However, importing into iphoto doesn't help (for Mac users) as it still shows some "noise" in the picture (squiggly lines).  If imported directly into iMovie, using the camera icon, left, on the bar in the middle of the page, does not present this problem and works fine.  Not sure why iphoto doesn't work cleanly.

  • Why do I not have sound when I import a M2TS video file into LR4? ?

    I have M2TS video files stored on my computer.  When I import a file into LR4, I have no sound.  I also tried importing files directly from my Sony camcorder, but still have no sound.

    How many sound channels does your video have?
    Lightroom does not support 5.1.
    http://feedback.photoshop.com/photoshop_family/topics/no_sound_audio_when_playing_mts_vide o

  • No Sound when looking at Videos

    Hello i have this i pod with 30GB.
    And i imported already alot of songs-but now i have imported already some videos and again and again i have no sound on them-but on the songs i have a very good sound --- can someone help me or is my ipod broken-it's new????

    Hi again-but it still doesnt work the sound-i thinck apple done some really bad mistakes-when itunes cant read that there is an audio file with the video-im really angry because i tried so many times and the video on my ipod is mpeg 4 and the videos before also wmv and other types-i just before to blame about it-can someone tell me a different way to hear a sound while playing the video-thanks

  • Lost sound when convert Quicktime video to ipod video

    Hi,
    when I use iTune to conveert a video file from quicktime (or others) to ipod/iphone video file I lost the sound!
    I'll appreciate any help!
    Thanks!

    QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, when you convert videos in iTunes to iPod format they only show the video and no sound since iTunes (really QuickTime) is not looking for the audio track within the video track and it gets lost.
    iPod plays video but not audio of some exported files
    http://docs.info.apple.com/article.html?artnum=302588
    One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
    http://www.squared5.com/
    but there are other applications besides MPEG Streamclip you can try as well.
    Frequently asked questions about viewing and syncing video with iTunes and iPod
    http://docs.info.apple.com/article.html?artnum=302758
    The Complete Guide to Converting Video to iPod Format (Mac)
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-convert ing-video-to-ipod-format-mac/
    Patrick

  • Random Green Frames When I Import Video?

    Hello,
    I Have Final Cut Pro X and I make videos on youtube as it is my job. I got gaming footage recorded via Eye Tv and Exported it normally as a H.264 and it was 720p HD and a .MP4 File. When I import it onto Final Cut Pro X I See Random Green Frames Just pop out of no where "In The Video" and I have no way of taking it out. Please help ASAP as it is VERY Frustrating .
    Thanks So Much,
    Im looking forward to some replys
    -eLeVaTiiONz
    Info:
    Macbook Pro Late 2010
    Newest Version Of Leopard
    Other video content works
    Content that does not work is recorded by a hauppauge HD-PVR Using Eye TV
    PLEASE ASK IF YOU NEED ANY MORE INFORMATION.

    See this guide about how to import camcorder video to iMovie step by step.

Maybe you are looking for

  • How can I use windows software on the IMac

    How can I use windows software on my iMac? I know I can partition the hard drive but do I need to buy Windows OS?

  • Print receipt of purchased items

    Hi, With all of the e-Commerce sites like Amazon, and all of the retail dot coms you can always log into your account and print or reprint a purchase. Why is it we cannot do this in the iTunes store? Gary

  • What exactly does the AppleCare cover for MacBook Pro with Retina Display?

    I purchased the extended protection plan for my MacBook Pro with Retina Display 15" and my question is what exactly does it cover in what kind of situations (i.e. viruses, damaged ports, damaged charger, etc.)? I want to be able to take full advantag

  • Bill of lading is not populating

    We are entering bill of lading information in MIGO but when we are posting invoice through MIRO Bill of lading field is empty. What can we do to it appear on the MIRO. Regards Ram

  • In-line text popup

    The Vertical example in the FlashHelp SDK provided with RHX5 (help example with safari guides for Africa), there are popup links that expand the text content of the current paragraph by adding an explanation in-line with the popup link. There is one