No sound when importing from a Sony HDR-HC7

Hello all together,
I bought a new Sony HDR-HC7, the camera is fantastic. There is only one thing perplexing me: When importing HD-Clips into iMovie HD 6.0.3 I cannot hear the sound that was recorded by the camera. When I play the clips, I can hear sound. What could this be?
With my old Sony TVR 33 (no HDV) I don't have this problem.
Did I forget any settings?
Thanks for advices,
Stefan

Hi Stfan:
I guess I would try the easy things first.
Make certain that " Video Play Through Camera " is
not enabled in imovie Preferences. That is
because it sends all audio through the FireWire port
and mutes it on the computer.
ake certain your video is 16-bit audio (not 12-bit).
Once you have imported (and saved) the video into
imovie, close imovie. Then unplug all firewire
devices (camera included).
Relaunch imovie. Is the audio there now?
Sue
Hi Sue,
thank you for your advice. As I use the German version I am not quite sure, if "Video Play Through Camera" is in the third tab of the iMovie-Prefs the fourth checkbox overarm? This one's unenabled. Audio is 16-bit.
Audio was alwas there in the play-mode but not in the import-mode.
Stefan
MacPro 2,66 - 2 GB RAM/PB G4 1,5 15" Mac OS X (10.4.8)

Similar Messages

Finalcut X 10.0.6 import from a Sony Hdr-sr11E with dolby sourround is possible?

Hello!
Finalcut X 10.0.6 import from a Sony Hdr-sr11E with dolby sourround is possible?
Regards
Peter Polz

Hello!
Finalcut X 10.0.6 import from a Sony Hdr-sr11E with dolby sourround is possible?
Regards
Peter Polz

Importing from a Sony HDR-XR500V

Hi guys, noob here.
I've been digging all over the internet and I can't seem to find an answer to this.
I recently purchased a Sony HDR-XR500V Handycam. The camera is a 1080p hd camera (sorry I don't actually know much about specs) but I know a friend forewarned me about buying a camera with a hard drive because of the difficulties I'd have uploading. Stupidly, I purchased this camera and I'm pulling my hair out trying to get my video created.
I run Adobe Premiere Pro CS3 and the software won't detect my camera even when the computer does. Sony has me uploading through a program called Picture Motion Browser instead, which came with the camcorder. It then saves it in a weird file format (mt2?). The software gives me the options to convert it to wmv or mpeg2, but when I convert it to wmv the picture quality becomes cell-phone caliber and when I convert it to mpeg2 and import it adobe can't load the sound from the file.
If I can find a way to
-Import it into CS3 directly
or
-Convert it to mpeg2 and still maintain the sound
Then problem solved
I desperately need this for a project due this week and I hope you guys don't mind my noobness
Thanks! =D

Two major problems with this camera:
1. AVCHD. It may require a much beefier computer than you currently have, something the salespeople never tell you when you buy the camera. I7 overclocked may be around minimum.
2. AC3 5.1 sound. You may need to demux your clips and convert the audio to 48 KHz 16 bit stereo PCM/WAV.
Do not convert to WMV. Leave it in the format it is imported. All conversions will severely reduce quality.
If you can still exchange the camera for another, more edit-friendly model, jump at it.

Blocky video importing from a Sony HDR-HC3

I have been using my Son HDR-HC3 with my PC, Windows XP, and Sony Vegas Movie Studio for over a year without any problems. Recently I upgraded my mac to a new 20" iMac.
Upon importing either video off tape or live video from my camcorder I get periodic errors in the video, macroblocking. This only happens with HDV, not DV.
This happens in iMovie 7.1 but Apple also had be install iMovie 6 HD - same issues in both.
Since I know the camcorder and 1394 cable are good and iMovie can import DV without any issues I strongly suspect that iMovie (or the QuickTime CODECs that it is using) are not too happy with the format of the compressed HDV coming from the HDR-HC3.
A call to Apple has them telling me to take my camcorder to an Apple Store (an hour drive for me) to see if the same issue exists on one of their macs. If so, it's a software issue and they'll make a note and, at some point, maybe fix it. If I don't see the problem on one of the store macs then it's a hardware problem with my mac.
Either way, I'm not a happy camper since HDV editing is the primary reason for upgrading from my stable, yet slow G4 to this new iMac.
Has anyone else experienced this problem? Have you found a software/configuration work-around?

Welcome to the  Discussion Forums.
With all due respect the offer from  to test your equipment is the best you can hope for, you are unlikely to get the same level of help through forum messages as you are from physical testing.

Problem with sound when import from Premiere into After Effects

Hi!
I imported a sequence from a Premiere Pro project using File -> Import -> Adobe Premiere Project...
The video in the sequence showed up in the After Effects project as a composition. However, the composition did not include the sound from the sequence! Is there a way to keep the sound from the sequence upon import into After Effects?
Thanks

i`m sorry about the screenshot size, but i could only upload pics with 605 px width.
Nevertheless it seems that you saved my day. looks like it was all about the scale to framesize thing.
thank you so much!!!!

I Movie not importing from my Sony HDR HCI camera...why?

My HD camera is not importing into I movie. When I import, it records just fine and it shows a clip being recorded. When stop the import after 5 or 7 minutes, I MOVIE then shows a total clip of a few seconds up to a few minutes, but never the whole clip.
What is wrong?

Hi Bob
HD Cameras is not my thing But the import problems I got some ideas about:
- most common problem is wrong mix of Mac OS + iMovie version + QuickTime version.
I would use Mac OS X.4.8 + iMovie 6.0.3 + QuickTime 7.1.3
The amount of free space on Your internal hard disk (more than 20Gb +
space for the movie material) - and make Import to this.
Other programs working in the background can interfrere - then mainly FileVault
Turn this OFF!
Yours Bengt W

Dropped frames when importing from sony dcr-hc52

hey all,
i'm getting a lot of dropped frames when importing from my sony cdr-hc52. anyone had this experience? is there a setting i'm missing that would correct this?
thanks in advance,
filmgrrrl

Hello kellyfromkenley, Depending on how you move the video or share the video from iMovie to iDVD it can make a big difference. One way is to go to the Share Menu > Share to iDVD. But the better is to Share to Media Browser instead. Try this:
Go back to iMovie and open your Project in Project Library.
Go to Share Menu > Share to Media Browser
Choose the Large size and let it run until it finishes
Quit iMovie and open iDVD.
In iDVD click on the Media Button, then click on the Movies button and look for your project under the iMovie star icon in the Media Browser itself.
Drag that project icon into the iDVD project window and burn another disk
I think you'll see an increase in the visual quality using this method.
The reason this has an effect on the visual quality is there's a whole different set of operations performed on the video when you first Share to Media Browser. The side effect of those changes in steps is a much better looking DVD from your iMovie project.

Slow movie when imported from HDR HC3 to iMovie

When I import from my Sony camera to iMovie I get a message 'Downloading at 1/8th speed'. When I then play back the movie through iMovie the sound and video play slowly....like a 45rpm record played at 33rpm...for those who remember what records are! Could it be my processor speed? I run a PowerBook G4.
Thanks.

Hi Tumnus,
Welcome to the Apple Forums.
Yes it could very likely be your processor speed or how much RAM you have. The baseline for HD importing, editing and exporting is 1GH and 512MB RAM. Also there are other factors involved like is the camera fully supported in iMovie (altho I have a Sony HDR-HC1E and it imports fine).
It might be time to update to a new Mac with a faster processor and some more RAM (1GB is recommended)
Hope this helps.
Paul

Can import 1080i from Sony HDR-HC7, but not export it

I am helping a friend with a Sony HDR-HC7 camcorder that is capable of DV and HDV formats. They have used it without a hitch with DV shot footage on import and export to the camera. They are using iMovie HD 6.0.3. They shot footage in 1080i format and imported and edited it, without incident, but have had no success exporting the edited project back to the camera. We've gone over the in-camera settings, manual in hand a few times, with no success. We have also phoned Sony on two occasions and basically got no help from them. Always using a firewire cable and camcorder mode and connection as when working with DV, but with connection and format settings changed to reflect the format. iMovie acts like it is going through it's paces and exporting, as we are asking it to, but nothing on the camera indicates we are getting anything from the computer, as the friend is used to seeing when they have worked with DV footage - no matter how long we wait or let it go through it's paces.
Any one with this camera with success exporting it back to the camera with iMovie HD 6.0.3?

I've got the same exact problem. The most frustrating thing is it worked once...iMovie 06 seemed to recognize the camera and just started capturing the footage. Now I cannot get it to connect for the life of me. I'm in VCR mode, I'm using a 4 to 6 pin firewire cable, ect - so frustrating.

Importing HD from a Sony HDR-CX7

Apologies for this crazy question, but the last time I was using iMovie was over a year ago (version 08). There were two problems with importing HD footage from my Sony HDR-CX7: (1) iMovie didn't correctly compress it, and the file size(s) ended up being huge; (2) iMovie didn't handle the 5-channel audio correctly and I ended up with only 1 channel (iMovie 08 wouldn't mix down 5-channel to stereo correctly (on the fly)).
The way I dealt with the first problem was to spend thousands of dollars on external drives for storage of the files.
The way I dealt with the second problem was this: for every single clip I downloaded from my camera, I had to: export it to Quicktime, delete the clip in iMovie, fix the sound in Quicktime, re-import it back into iMovie.
Does anyone know if this stuff has been fixed?
Thanks for any info!

Damon Curtis wrote:
Does anyone know if I can get the video off the card and into something like Quicktime without using iMovie?
I assume you are using AVCHD video... I have never used this format before, but I bet you could mount the disk on your computer and open the video files in something like MPEG Streamclip (free). You can then export it from that program how you wish. (Although exporting to Apple Intermediate Codec would probably be the fastest option for HD.)
Damon Curtis wrote:
Out of the box Iomega 1TB drive, I don't know how it is formatted. Just plugged it in an started using it.
You can mount the disk on your computer, then open Disk Utility. If you select the disk partition (partitions are indented), the disk format is on the bottom of the window along with other information.

I am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

i am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

Looking up your camera online, I found it is capable of 1920 x 1080 Full HD 60p Recording. It's the 60p (60 frames per second Progressive) that's the problem I think. iMovie '11 will do 60i (Interlaced). You might need to convert it from the format the camera currently uses into another format to get it into iMovie. Read more about it on this link here: How to import 60p footage From that message thread comes the recommendation to use ClipWrap to convert the camera's video clips now that they are in 60p:
Tom Wolsky
Re: How to import 60p footage
Aug 17, 2011 12:40 PM (in response to ptburnett68)
Use ClipWrap to rewrap to QuickTime. Import the files. Edit in either 59.94 or 29.97. The latter if you want to use the high frame rate for slomo

Problem with importing movies from my Sony HDR-SR5

Having trouble importing movies from my Sony HDR-SR5. The computer is reading HD camcorder but Iphoto is coming up and not Imovie. I don't have any still pics and SD movies. When I go into imovie camcorder does not show up. Any suggestions?

Did your "Camcorder" ever worked with iMovie? If so, what version were your running?
What version of iMovie are you currently running: iMovie 8.0.5 or iMovie 8.0.6?
What version of the OS are you currently running: 10.6.2 or 10.6.3?

My computer is no longer allowing me to import video from my Sony HDR camera.

My computer is no longer allowing me to import video from my Sony HDR camera. I don't know if it is the operating system or the version of imovie or what. I also have imovie 06 and I was always able to import into it and can no longer do that either.

See:
Eliminating browser redirects and advertisements
This is probably due to a similar issue to a browser redirect.

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the driver?

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the upgrade which is affecting the transfer? Is there a way of resolving this?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

I'm trying to upload videos from my Sony HDR-CX550 camera and the files that contain the video (.cpi or .mts) are all grayed out on iMovie. I've been able to upload footage before onto Apple computers but now it doesn't seem to be working. Suggestions?

I've tried many different options including calling Apple Customer Support and talking to them for over an hour troubleshooting the issue. They couldn't do anything. I also called Sony who failed as well. Somebody please help me out. Thanks!

Hello whatif95,
Sorry to hear that you are having trouble importing video from your Sony HDR-CX550. I found an article that provides some information specific to your camera and iMovie '09:
iMovie: Importing both HD and SD content with Sony HDR series cameras
http://support.apple.com/kb/HT1793
For versions previous to iMovie ’11 v9.0.1, including iMovie ’08, ’09, and ’11 (v9.0 only):
To import the AVCHD content from the camera when MPEG-2 content has also been recorded, you must first import and erase the MPEG-2 content from the camera. You should then be able to import the AVCHD content.
I hope this helps!
Best,
Sheila M.

No sound when importing from a Sony HDR-HC7

Similar Messages

Maybe you are looking for