No sound when movies are burned onto DVD

I have sound in my movies when I preview the project before I burn it but after it's burned the sound disappears from the movies... The theme music is there but no sound from the movies. Was I suppose to import sound or something? Please help.

Hi, am not an expert like the others are, but I too had the same problem and read somewhere in this forum that this happens (no sound) if you had chapter markers on your iMovie and you placed the chapter mark at a place that doesnt exactly align with where the music for that chapter starts. So what I did was to go back to my iMovie project, i deleted the previous chapter marker, made sure the music for that chapter started exactly where the chapter started, and then added a new chapter marker. then when you open iDVD, it will prompt you if you want to update your "assets", say yes. then go to Movies and drag that same project in.
I hope it works for you. It did for me (but unfortunately I found out there was no music in one of my chapters only after I had already burned 10 copies!!). Hope you are luckier.

Similar Messages

Poor quality (vibration) on video clips when it burns onto DVD

We created 15 mins video on Final Cut Express, saved on Quick Time, and burned onto DVD. Although the video on Quick Time was fine, some of the quality of the video clips on DVD we burned was so poor....It had so much vibration on some of the video clips. We tried on both Best Performance & Best Quality, but they both had poor quality. Do you have any suggestions? Do you think upgrading to I Life 08 will help? Please Help!!!! Thanks!

It had so much vibration on some of the video clips.
Video on a DVD is mpg-2 compressed (which looks at frame to frame differences in compression) and is interlaced.
If you have content with lots of movement - like many hand-held shots - mpg-2 compression and interlacing will act to create lots of 'jumping' or 'vibration'. The only solution is to use a tripod and avoid shaky, hand-held shots.
BTW, for a short clip, 'Best Performance' will give you the best quality you can get.
F Shippey

How do I correct the error; "PluginCoder error: no pligin DLLs" when attempting to burn a DVD with Premiere Elements 13

I just upgraded to PE 13 - removed PE12 prior to installing PE13 and now I cannot burn a DVD on my Win 7 Pro 64bit PC. In my first attempt at burning a DVD PE 13 did not see the DVD burner - drive "z:". I have a WD MyBook 4TB USB HD and had Security configured which created a Virtual CD on the drive. I disabled the virtual CD and rebooted. This time PE13 recognized the DVD burner but when trying to burn a DVD I received the No DLLs message and had to cancel the burn. I tried the burn again and the DVD burner was no longer recognized.
I then removed PE13 and reinstalled it - no errors during the install. Tried again and same result - no DLLs.
Any help would be greatly appreciated.
Thanks for your time,
Mark

PRE_help
For Premiere Elements user, I would make note that the presets for burn to disc cannot be customized by the user within the program.
a. The second thread that you pointed rkclarke36 to does talk about resolving this issue by changing the burn to disc frame rate from
24 fps to 30 fps. But, that was for Premiere Pro, not Premiere Elements. In Premiere Pro, can the user really customize an Adobe burn to disc
preset?
For Premiere Elements
If the burn to is to DVD disc for DVD-VIDEO, the user is
confined to two frames rate, 25 interlaced frames per second or 29.97 interlaced frames per second. But, he/she cannot change the frame rate
within the preset.
If the burn to is to DVD disc for AVCHD DVD, the user again meets different presets, but cannot change the frame rate within the preset. For Premiere Elements 13 burn to AVCHD disc, the presets are
Premiere Elements 13
H.264 1440 x 1080i NTSC Dolby
H.264 1440 x 1080i PAL Dolby
H.264 1440 x 1080p NTSC Dolby
H.264 1920 x 1080i NTSC Dolby
H.264 1920 x 1080i PAL Dolby
H.264 1920 x 1080p NTSC Dolby
Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
b. Mark has not yet offered the details of the Timeline content (video and/or stills) being taken to burn to DVD-VIDEO or AVCHD DVD. So, frame size as per your first mentioned link might be an avenue to pursue. I would include that with all my testing of Premiere Elements 4 to 13, I have not gotten this particular dll error
with any oversized stills.
ATR

I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop

I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop. I have tried a number of different DVD disks but keep getting the error. I supect that the recovery program is trying to burn at too high a speed as I have had this problem when burn to 16x spped DVDs, but I can't find any way to change the burn speed in the recovery program. Any sugestions would be appreciated?
Regards, Steve

Hi
Please find the link given below might help you to fix the issue note windows vista & 7 troubleshooting are the same.
Troubleshooting CD or DVD Disc Burning Problems
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?
Thanks, Scott

Hi
This Q is close to - Something is wrong. What's it ?
You have to supply much more info to be able to start guessing.
• What material was used ? Video codec, Audio file format and Photo file format
• Free space on Start-Up hard disk. How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Burn speed set down or not ?
• Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
And all extra info You can supply - that set's us on track.
Yours wanting to be of help. Bengt W

I am getting error code 0x8002006E when trying to burn a DVD

Hi, I am running the latest Lion update, on my MB Pro, and keep getting the error code 0x8002006E when trying to burn a DVD. Could this be a dirty lens issue in the drive. I see that many others have had the same problem, but relly cant seem to find anyone that has a solution that works.. Help

marobinson58 wrote:
keep getting the error code 0x8002006E when trying to burn a DVD.
It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
"The burn failed because of a medium write error."
Could this be a dirty lens issue in the drive.
I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

Burning onto DVD+RW or -RW

Hi Everyone, this has probably been addressed already but I'm having trouble finding the answer I need.
I don't seem to be able to burn onto dvd+rw or -rw's and mac help says that OSX 10.3.9 won't do it, should I upgrade to Tiger or is Toast 7 the only options?
Cheers for any help you can give!
Phil
iMac G5 17" 1.8Ghz ,160GB hard drive,airport,superdrive,768MB ram Mac OS X (10.3.9)

Phil:
Toast 6 or 7 Titanium will definitely burn the DVDs to which you refer, assuming, of course, that you have a DVD burner that will.
Good luck.
cornelius
Pismo400, 100 GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS 10.4.3 Mac OS X (10.3.9) Beige G3 OS 8.6

When trying to burn a DVD, I have Disc Burning Errors. What Can I do?

When trying to burn a DVD, I have Disc Burning Errors. What Can I do?

Since Premiere Pro after version 2 does not burn a DVD at all, you should ask in the Encore forum
http://forums.adobe.com/community/encore?view=discussions
When you go there, the KIND of information you need to supply
PPro Information FAQ http://forums.adobe.com/message/4200840

Error when tryying to burn ny dvd with Encore

I am getting a error when tryying to burn ny dvd with Encore
PCG "baseball_and_more" has an error at 00;00;00.
Internal software error:0% line basball_and_more -PGC Info name == baseball_and_more ref == Bpgc, time 00;00;00
Anyone know what this is due to?
If I add another clip before the base_ball_and_more then I get the same erro but at 16:45:0I 4
This seems related to changing the M/N field in the adobe media encoder. If I use defaults while encoding in premier
I dont get them error in Encore. But if I change the defaults ( hope fully to get better DVD results) I get the error.

First, back on the main page http://forums.adobe.com/community/encore enter
pcg
into the SMALL forum search window on the right and read previous discussions
Second, try exporting from Premiere as DV AVI type 2 and give that to Encore... use the Automatic encoding setting and let Encore make the decision on what will best fit on a DVD

When trying to Burn a DVD I get the following error: 'The drive reported an error:Sense Key=MEDIUM ERROR Sense Code=0x73,0x03' Please advise

when trying to Burn a DVD I get the following error:
'The drive reported an error:Sense Key=MEDIUM ERROR Sense Code=0x73,0x03'
Please advise

this reccommendation is to OS 10.5.8 only
Go to the hard drive find the following folders and look for the following file, com.apple.finder.Plist, delete it and restart the computer. Its found under the following folder Users-account name-library-prefrences. This helped resolve my issue for now.

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Can Movies be burned to DVD?

Can movies be burned to DVD in new iTunes 7 ? Thanks

You see, this is why I was excited about iTunes 7. Until the player comes out, there's no point in buying movies unless you have the space on your ipod (and money) to have multiple copies of the same movie in different formats.
Same reason why I don't understand UMD on the PSP. A portable DVD player would be just as useful.
I can burn protected audio files to CD and use elsewhere, why not TV shows and movies?
I apologize for simply ranting, though I do appreciate that somebody had the answer to this as being no (currently).
Apple is all about freedom, this seems to be a step in the wrong direction.
Everything else about iTunes 7 appears amazing. Just highly disappointing, I suppose. I was done buying DVDs at the store if this had been a yes...

How to fix keyboard clicks and lock sounds when they are on in setting , sounds and still do not work?

How to fix keyboard clicks and lock sounds when they are on in setting , sounds and still do not work?

Double-click the Home button and swipe the Task Bar to the right. Check Volume and Mute Settings.
Message was edited by: Diavonex

Pictures are blurry when slideshow is burned to dvd using iPhoto, iMovie and iDvd. How do I correct?

I used iPhoto, iMovie, and iDVD... How do I create a slideshow burned to a DVD without getting blurry images when slideshow is played through DVD a player?

You created the slideshow using the built-in Ken Burns effect in iPhoto or iMovie? I've never found that to be up to my expectations; additionally, if the people or objects in the pictures have certain designs (in their clothes), using movement can blur them. I use Photo to Movie myself - to me it creates the smoothest movement in slideshows. Another possibility is the size of your images: did you increase or decrease their original size? And when you encoded it, what settings did you use? I use the Share > Quicktime > Expert settings and then choose these options:
I've found that these settings result in the most lossless conversion. After the new .mov file is saved to the desktop, I then add it to iDVD after creating a customized menu and theme.

No sound on movies once burned to disk

I have no idea if this is the correct place to ask my questions, but hopefully someone can help me. I made an iDVD project consisting of three movies imported from my camera and a slide show. I can view all three movies perfectly when I open from the desktop version of the project. I burned the project onto a DVD, and there is no sound when I play the movies. There is music during the slideshow and music at the opening, but no luck with each independent movie. PLEASE HELP- I have so many small movies of my kids and would love to make more DVDs out of them! Thanks so much.

Welcome to the forums, lylas.
From your description, the +three movies imported from my camera"+ have the audio problem. It's possible they're in a format that needs to be converted.
.avi movies can cause this kind of problem (yourfilename.avi). Possible workaround - If you open the camera video in iMovie, does it play correctly? And, if you Export from iMovie to iDVD, does that video play correctly?
There is software to change audio/video formats if necessary (Quicktime Pro, MPEG Streamclip, Roxio Toast, etc.). Tell us more about your video.
John

No sound when movies are burned onto DVD

Similar Messages

Maybe you are looking for