NO SOUND WHEN MOVING VIDEOS INTO iMOVIE!! something about Mpeg muxed?!?!

I recorded my videos with my sony cybershot camera - no problems. I can rip them onto my Macbook Pro and watch them in quicktime and hear the sound just fine - no problems. But, when I pull the videos into iMovie HD to edit and try to watch the play back, I see video but no sound!! I looked in the help tab and it said that if my videos are Mpeg 1 "muxed" (or something like that) then I won't be able to hear any sound. Well how do I convert my videos to something that will allow me to hear the sound when I'm editing them in iMovie HD???
Any help would be greatly appreciated!!!!!!!
Thanks!
Macbook Pro Mac OS X (10.4.8)

Welcome to discussions, designerman.
iMovie can't import MPEG1 or MPEG 2 files, and that's waht you are trying to do.
Read this:
Can not hear audio in iMovie when I import an MPEG clip
http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
:)Sue

Similar Messages

Whenever I import a video into Imovie something it changes the lighting

Hi my name is Jon,
I have a problem with Imovie 11, whenever I import a video (MOV file) it totally messes up the start and end of the video. I had a very dark video and at the start it made it look whiteish and very light. Please Help! The video says Lily's Dubstep Fail Part 2 in intervals and the beginning as you see below is jacked up Please help, I use Imove 11 and the video type was a MOV file.
Original:
Bad Version:

Hi
Can this be a setting in Your Camera ?
I NEVER use any of the Camera functions - so that I have an as Clean original to start from and then I can add whatever effect later. If I go wrong I have a Clean original to re-start from.
.mov - are no Video-Codec - it is a container (sort of folder) and can hold just about anything good or bad.
Open the .mov file with QuickTime-player
Open Inspector [cmd+I]
Read Video format (codec) : nnnnnnnnnnnnnnnnn
Frames per second : YY.yy fps
What does they read ?
Yours Bengt W

I have been trying to import VHS video into iMovie via a Hollywood Dazzle bridge. Did not have trouble until I upgraded to mavericks. I have a mac book pro, 10.9.1, iMovie 10.0.2. Says it is recording, but when I go to check, it says the file is empty.

I have been trying import VHS video into iMovie via a Hollywood Dazzle bridge. I have been successful doing this in the past, but now it is not working. I have a mac book pro, 10.9.1, (mavericks), iMovie 10.0.2. Everything in iMovie looks like it is working. It reads "recording" in the upper left hand corner of the pane while the video is playing. When I stop the process to check on my clip it says that the file is empty. The only thing that has changed since I did it successfully is that I upgraded to mavericks from whatever I had previously. My system is about one year old. Any suggestions?

Hey, Clinton,
     Thanks for your help! I was able to go to iMovie 9.0.9 and import video. I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support. They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded. That didn't change anything. In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge. But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2.
     1. Open iMovie 9 (finder/applications/iMovie 9.0.9
     2. Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
     3. Close iMovie 9
     4. Open iMovie 10 (probably in the dock)
     5. File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events. Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.)
     6. Select the clips and import. Click the blue "Import Selected" button on the bottom right.
You may get a message that some files cannot be imported. Click continue import. It's a little glitchy. It imports your clip, and also makes a copy of it, too. On the copy, the audio is normal, but the video is choppy. In any case, you would delete the copy, anyway.
Hope this additional information helps somebody else. Thanks again, Clinton for helping me!

Why can't I import sound with video into iMovie from digital camera?

This is disturbing. I have a digital video camera that took great video + sound. I import into iMovie (using my DV cable that came with the camera) and get video but no sound.
Now, in the past the sound came in, but no longer. Any and all advise is requested. I have to make number videos of lectures starting Wednesday evening and have to be able to provide video with audio.
Thanks.

Try importing video shot with the camera's internal
microphone. If that doesn't work either, the mic is
not the problem.
I have no problem importing sound with video when using the internal video camera mic. No problem (other than sound quality issues with the speaker being 40 feet away from the camera's internal mic!
But I can play back the video made with the external mic in the camera and the sound is stunningly clear, crisp and loud. It's just a matter of getting it out of the camera into my Mac. I don't think it's the microphone; it must be the computer.
I just find it sad to believe that Apple's software is so limited--even in Final Cut Express HD.

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

When i import a video into iMovie the quality gets very ******,but when its not in iMovie it looks awesome

when i import a video into iMovie the quality gets very ******,but when its not in iMovie it looks awesome, please help

Exact same problem

Can you use midi sounds when recording videos on Photobooth?

Can you use midi sounds when recording videos on Photobooth?
Basically, i like to record videos of me singing and playing guitar or keyboard, but to get a good sound for the keyboard I'd like to be able to record the audio using MIDI sounds...
Ive got Logic, I've got M-Audio Fast Track Pro, into which i have my mic, guitar, and keyboard midi plaugged into. I can use it to record the mic and guitar on photobooth as they are audio inputs, however i can't use the midi sounds on the keyboard :/ I have tried having logic open with the desired MIDI sound selected whilst recording but it doesnt work...
Is there ANY way this is possible?
HELP PLEASE!
Thanks!

I Have just the same problem, if I shout very near the microphone i can just hear something, did you manage to solve the problem?

Importing DivX 4.1.2 encoded video into iMovie HD 6

I had a PowerBook G4 1.67 GHz machine. With that, I could import DivX encoded video into iMovie HD 6. I had installed DivX for Mac 6.5 to allow this import.
I just switched to a new machine, MacBook Pro, Intel Core Duo 2.16 GHz.
I migrated over to this new machine using the Migration Assistant.
I just updated the system to 10.4.8 this morning.
When I import the same DivX encoded video into iMovie HD 6 now, the application crashes immediately.
Something did not get migrated properly...it seems.
Interestingly, there are a few video files that I had saved on my old machine using QT 7 Pro (still DivX encoded), and they import just fine on the new machine. I tried resaving the DivX video on the new machine in QT 7 Pro, but this does not rectify the problem. Very odd. I also now can not get QT Pro 7 to export these files as another encoded file. I could do that on the old machine.
I hope someone can provide me with the insight into the plug-in or reloading of something that will fix this problem. Is it compatibility of the DivX codec with the new Intel processor?
Thanks everyone.
MacBook Pro Mac OS X (10.4.7) Intel Core Duo 2.16 GHz

I'm working on a video at the moment and the way I'm dealing with it is with MPEG Streamclip. Hard drive cameras use a different format and you cannot import directly to iMovie. (Looking to go back to Mini DV Tape the way things are going)... Had to pay for MPEG Streamclip but it transcodes back to DV on the fly and then you spend hours importing to iMovie. I use a JVC Emperio hard drive Video camera. There is quite a deal of quality loss during all the various transitions unfortunately. You can also try... *Download and install DVDrop. This converts the .MOD MPEG-2 formatted video into standard Digital Video (DV) for iMovie. (see www.dropdv.com).* (cannot vouch for that one though. I'm going to try this evening. Thanks to Zac.

I tried to import a video into iMovie. Its says their is not enough space on the destination disk. I deleted many projects, and events. Nothing changed. What files do I delete and how?

I tried to import a video into iMovie. Its says their is not enough space on the destination disk. I deleted many projects, and events. Nothing changed. What files do I delete and how?

Hard drive full or near full:
You are going to have to delete, move or archive your data to regain hard drive space.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Other things you can do to gain space.
Delete any old or no longer needed emails and/or archive older emails you want to save.
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive or delete any old documents you no longer use or immediately need.
Uninstall apps that you no longer use. If the app has a dedicated uninstaller, use it to completely uninstall the app. If the app has no uninstaller, then just drag it to the OS X Trash icon and empty the Trash.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its thing initially, then go to the cleaning and maintenance tabs and run all of the processes in the tabs. Let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
If you have any other large folders of personal data or projects, these should be moved, also, to the external hard drive and then either archived to disc and/or deleted off your internal hard drive.
You may have to Purchase an external FireWire or Thunderbolt hard drive to move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
Good Luck!

Importing analogue video into imovie.

I am trying to import analogue video into imovie 5 using my canon i830 dv camera with tape out. imovie 5 will not import using this method and as I only have a few tapes to transfer I do not want to purchase further hardware. Will imovie 6 enable me to do this. Any sugestions?

iMovie has not changed in how it imports video from camcorders to the best of my knowledge. Your DV camcorder with a Firewire connection should import to iM4, 5 (HD), or 6. So it would appear that there is a problem with a setting, hardware, or something else keeping it from working. Sooooo....
Let's explore your setup. You have a DV camcorder right? It has a Firewire port? You are connecting the camera, with a Firewire cable, directly to the Mac? Daisy chained off an external hard drive? Via a Firewire hub?
Does the menu of the camera feature different connection types that you can select from (e.g. Firewire, USB, A/V jacks, etc.)?
What mode do you put the camera in when you attempt to import? Camcorder record mode? VCR play mode? Other?
When you hook up the camera what exactly happens? Do you get absolutely nothing? Do you get a message that the camcorder is connected but then can not get it to import? Do you get an error message?
Are you in an iMovie project when you attempt to import? Or are you trying to see the camcorder from the desktop?
Are you SURE the cable you have is OK? Have you tried it on another device to verify? Some cables have the molded over plastic higher on the connector than others. I personally have had devices with deep ports on them that a cable with more molded plastic (less exposed metal) not connecting but swapping to another cable with less molding and more of the metal connector exposed working correctly.
Patrick

Getting Analog Video into iMovie

Greetings,
OK, so I have successfully imported digital video into iMovie on several occasions with my "newer" video camera (a SONY DCR-TRV80).
Problem is, I have and older camera (a Canon ES800A) that uses 8mm tape. I've been wanting to get rid of the camera (a nice one for it's time) but, I have about 6 tapes worth of video that I'd like to at least permanently archive.
I suspect there is some hardware device out there that will allow me do to this - can anyone tell me would I need to be shopping for? (hoping it's not prohibitively expensive!)
Any help would be appreciated!
Next up? - a camcorder with a hard disk!
Thanks,
Jim

Hi : I have a related problem maybe you could help me with....I've got about 6 Beta tapes [ remember them ? ] that I'd like to transfer to DVD while there still viewable. About 4 hours of tape on each....
I have an Optura 20 DV [Canon] and a Beta tape machine. The optura 20 manual says you should be able to run the RCA plugs out of the Beta unit into the AV jack on the Optura, then FW out into I - Movie. OR you can record onto a DV tape, then into IMovie. I've had no luck with either method. No Beta material shows on the DV monitor no matter what I do. It does play into a standard T.V from Beta, so I know the tape AND the Beta machine are working.
Do I need something like that Canopus Converter ? ....don't know if that' s the exact name .
Any suggestions appreciated...Thanks
Braden

TS3376 The microphone on my i-pad mini does not seem to hear/pick-up any sounds when recording videos, facetime etc. Has anyone else had this problem?

The micro phone on my i-pad mini seems to have stopped working. The unit has never been rough housed and is always kept in a safe environment....we can hear everything fine, but no one can hear us and it does not pick up any sounds when recording video. Any suggestions on how to fix it?

I Have just the same problem, if I shout very near the microphone i can just hear something, did you manage to solve the problem?

DI imported an mpeg4 video into iMovie 10.0.5 and the Precision Editor is grayed out and I can't edit. Why??

I imported an mpeg34 video into iMovie 10.0.5 and I am unable to edit it. Precision Editor and Clip Trimmer are grayed out. Any idea why this is happening?

Did you get any joy with answering this?
My first thought was that maybe when you imported you chose to leave the files in place rather than copy then to the iMovie library..but I can't see where that option is now.
I too have created a short movie from load f clips..but can't export or share either..the 'Share 'menu is empty..you go to it and no sub menu appears.

Please recommend digital format for importing video into iMovie.

I have iMovie '09 and am considering a purchase of a new digital camcorder. I want to easily inport video into IMovie for editing and burning DVD's for use on our home player and for importing into Facebook, email, etc. Can you recommend the best digital format for me? Also, if you have any recommended camcorders I would appreciate that too. I'm looking for something portable with High Def and either a hard drive or flash drive memory component (or both-hybrid).

I would suggest that you pick something from[this list|http://support.apple.com/kb/HT3290]

Trouble importing video into iMovie from External HD

I have video from my Panasonic Full HD camera. I have already transferred the video off the camera and onto an external hard drive. When I try to import the video into iMovie those files are grayed out. Does anyone have any idea how to make this work?
It is all my video of my son's first year since birth!

It is very important that when you transferred the video off the camera, you kept all files and folders from the camera. If you did, you can open iMovie and use FILE/IMPORT FROM CAMERA ARCHIVE and navigate to the folder that contains the contents that you removed from the camera.
In the future, open iMovie and use FILE/IMPORT FROM CAMERA. This will bring up an import screen. There you can click a button that says Create Camera Archive. This will automatically get you all the files you need off the camera, and it gives you a good backup.
You can also import directly into iMovie from this screen.
If you did not preserve the contents of the camera - for example, you just copied the .mts files, but did not copy the rest of the files and folders, you will need a third party app to convert the .mts files so that iMovie can read them. Two apps that people use for this are ClipWrap and Voltaic HD. They are pricey, but if you did not copy the full camera contents, this may be your best bet.

NO SOUND WHEN MOVING VIDEOS INTO iMOVIE!! something about Mpeg muxed?!?!

Similar Messages

Maybe you are looking for