No sound when playing an audio clip from a website
I'm trying to play an audio clip on a website. The site shows that the clip is playing, but I have no sound. My speakers are on and none of my volume mixers are muted. I played a clip from a different website and had sound. I spoke with Customer Service for the website where I'm not getting sound, and they tried playing the same clip on their computer, using Firefox, and it played the sound. I also tried playing a different clip on the same website, but again didn't have sound.
I'm using Firefox 16.0.2 on Windows XP
You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process.<br />
You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound.
See:
* https://support.mozilla.org/kb/No+sound+in+Firefox
* https://support.mozilla.org/kb/Video+or+audio+does+not+play
You can clear the Flash local storage and settings if the Flash player is involved.
*Windows Control Panel > Flash Player > Storage: Local Storage Settings
**Remove a specific domain: Local Storage Settings by site
**Remove all domains: Delete All and Delete Data
Flash Website Storage Settings panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
Global Storage Settings Panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html
Similar Messages
-
Lost all my sound when playing movies and shows from internet
i seemed to have lost all sound when playing movies from internet. i still have "system" sounds and beeps?
The speaker is not that good but maybe yours is defective if you have the volume fully raised.
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted and have a poor contact.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R" or "R".
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
Apple Retail Store - Genius Bar -
How do i play an audio clip from a server?
I am trying to play an audio file on another server, for example:
URL url = new URL("http://example.com/hello.wav");
AudioClip click = Applet.newAudioClip(url);
click.play();This doesn't seem to be working, can anyone tell me what I'm doing wrong?
Thanks very much.
Edited by: JavaJenius on Mar 7, 2008 6:47 PMUse a SwingWorker:new SwingWorker<AudioClip, Void> () {
protected AudioClip doInBackground () throws Exception {
return Applet.newAudioClip (new URL ("http://www.geocities.com/darrylbu/sounds/ringout.wav"));
protected void done () {
try {
get ().play ();
} catch (ExecutionException ex) {
ex.printStackTrace();
} catch (InterruptedException ex) {
ex.printStackTrace();
}.execute ();Depending on your need, you may want to make that a named class AND/OR assign it to a variable reference and call execute separately AND/OR you may want to call loop () instead of play () inwhich case you may want to assign the AudioClip to an instance field so that stop () can be called from any method.
For a console app, I would have recommended a Thread:new Thread (new Runnable () {
public void run () {
try {
Applet.newAudioClip (new URL ("http://www.geocities.com/darrylbu/sounds/ringout.wav")).play ();
} catch (MalformedURLException ex) {
ex.printStackTrace();
}).start ();The same reasoning applies.
Please read the API for anything you're not familiar with, and get back if you have any questions.
db -
How do I stop background audio clips from playing while browsing sites?
Firefox is my default browser. I use Google chrome and Internet explorer sessions for background monitoring news site sessions at the same time. I have no problem with the other two browsers. While surfing with Firefox I get unwanted background audio clips that start and run by themselves. I cannot stop them. They run and then stop by their self. They are some sort of adware and I cannot find the source to remove them. I also get video clips sometimes that I can stop that run around the outside of the active window I am viewing. These is very annoying. I have uninstalled Firefox and reinstalled it but the problem does not go away. I antivirus software, registry change protection software, and registry cleaning software. The problem is with the default browser.
How can I locate and remove the plugin, addin or service that starts this annoying activity. I have no special unwanted toolbars installed. There is nothing in the installed programs list in the control that shouldn't be there.I had a similar problem to this. EVERYTIME i started firefox, it would play an audio clip from a flash game i played a while ago, it would last 5 minutes before finishing. i tried the starting in safe mode, but that didn't work for me, so after that i then tried RESETTING firefox, and that has worked for me.
On another side of startup problems, firefox would also open up a new tab on startup, usually 22find.com or do-search.com. i know these are caused by a virus and have since deleted it, but it had changed a preference file in firefox causing it to continue to open on startup.
Having since done the firefox reset, i haven't had either of these problems AT ALL! would recommend this as a possible fix for you friend before trying any lengthy troubleshooting process or downloading any extra anti-virus removal software.
here's the like to showing you how to reset firefox: https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems -
I no longer have sound when playing my clips through adobe premiere elements 12. How to I correct this problem? I have checked all audio levels and there is no mute on etc. I updated to 12.1, but still no sound in any clips. Even not on old files which used to work.
bfun
What computer operating system is your Premiere Elements 12/12.1 running on? Can we assume that this audio plays back OK
on the same computer when you are using a computer player independent of Premiere Elements?
What are the properties of these clips that worked before but do not know with regard to sound
For now, I will assume that you are working on Windows 7, 8, or 8.1 64 bit.
Have you checked the Edit Menu/Preferences/Audio Hardware ASIO settings? Do you have any 3rd party audio devices incorporated in your computer environment?
Please delete the Adobe Premiere Elements Prefs file and, if that does not work, then the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. The Windows 7, 8, or 8.1 64 bit path is
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and, in the 12.0 Folder, is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Make sure that you are working with Folder Option "Show Hidden Files, Folders, and Drives" active so that you can see the complete path cited.
Do you have installation files or installation disc with the purchased serial number in case we need to resort to uninstall/reinstall?
We will be watching for your follow up.
ATR -
Fairly new to PP. When I drag a clip from the media browser only the video goes into the timeline. It doesn't allow the audio. What could I be doing wrong?
Its al in the targeting and source patching:
Adobe Premiere Pro Help | Source patching and track targeting -
Playing an audio file from applet
Hi friends,
I have a problem to be solved .
Please help me.
I have to play an audio file from applet.When the applet loads it shold start playing .There is a progress bar in the applet it shold alsomove corresponding to that.
How can i do that.Give me an idea.
I know nothing about jmf.
I am using j2sdk1.4,windows 2000 server.Andrew,
Forgive my naivety, but i struggle with JAVA! I am desperately trying to create a JAVA plugin to SERVOY and have to date been successful with a few things. Record, Playback, convert to .spx.
I am really struggling with implementing a rewind and fastforward function of the type you have. I thought it would be easy, but it appears not.
At the bottom is the complete code from my class that is called by the servoy plugin wrapper,
i had thought that adding some simple jump 500 ms would have been easy in something like this:
public AudioStream js_FastForward (AudioStream as) throws IOException {
!!! Line or two here to move the play head forward !!!
AudioPlayer.player.start(as);
return as;
Can you give me any pointers to how i code that fast forward bit.
many thanks
David
package com.d2e.MyPlugin;
import com.servoy.j2db.scripting.IScriptObject;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.awt.Button;
import javax.sound.sampled.*;
import org.xiph.speex.*;
import org.xiph.speex.spi.*;
import sun.audio.*; //import the sun.audio package
public class MyPluginProvider implements IScriptObject {
public void JSencode()
throws IOException{
/** Version of the Speex Encoder */
final String VERSION = "Java Speex Command Line Encoder v0.9.7 ($Revision: 1.5 $)";
/** Copyright display String */
final String COPYRIGHT = "Copyright (C) 2002-2004 Wimba S.A.";
/** Print level for messages : Print debug information */
final int DEBUG = 0;
/** Print level for messages : Print basic information */
final int INFO = 1;
/** Print level for messages : Print only warnings and errors */
final int WARN = 2;
/** Print level for messages : Print only errors */
final int ERROR = 3;
int printlevel = INFO;
/** File format for input or output audio file: Raw */
final int FILE_FORMAT_RAW = 0;
/** File format for input or output audio file: Ogg */
final int FILE_FORMAT_OGG = 1;
/** File format for input or output audio file: Wave */
final int FILE_FORMAT_WAVE = 2;
int srcFormat = FILE_FORMAT_OGG;
int destFormat = FILE_FORMAT_WAVE;
int mode = -1;
int quality = 4;
/** Defines the encoders algorithmic complexity. */
int complexity = 3;
/** Defines the number of frames per speex packet. */
int nframes = 1;
/** Defines the desired bitrate for the encoded audio. */
int bitrate = -1;
/** Defines the sampling rate of the audio input. */
int sampleRate = -1;
/** Defines the number of channels of the audio input (1=mono, 2=stereo). */
int channels = 1;
/** Defines the encoder VBR quality setting (float from 0 to 10). */
float vbr_quality = -1;
/** Defines whether or not to use VBR (Variable Bit Rate). */
boolean vbr = false;
/** Defines whether or not to use VAD (Voice Activity Detection). */
boolean vad = false;
/** Defines whether or not to use DTX (Discontinuous Transmission). */
boolean dtx = false;
//HArd code src format and dest
// private String srcPath ="junk.wav";
srcFormat = FILE_FORMAT_WAVE;
destFormat = FILE_FORMAT_OGG;
//destPath="junk.spx";
byte[] temp = new byte[2560]; // stereo UWB requires one to read 2560b
final int HEADERSIZE = 8;
final String RIFF = "RIFF";
final String WAVE = "WAVE";
final String FORMAT = "fmt ";
final String DATA = "data";
final int WAVE_FORMAT_PCM = 0x0001;
// Open the input stream
DataInputStream dis = new DataInputStream(new FileInputStream("junk.wav"));
// Prepare input stream
//DP - Sort out the Wave File
// read the WAVE header
dis.readFully(temp, 0, HEADERSIZE+4);
// Read other header chunks
dis.readFully(temp, 0, HEADERSIZE);
String chunk = new String(temp, 0, 4);
int size = readInt(temp, 4);
while (!chunk.equals(DATA)) {
dis.readFully(temp, 0, size);
if (chunk.equals(FORMAT)) {
typedef struct waveformat_extended_tag {
WORD wFormatTag; // format type
WORD nChannels; // number of channels (i.e. mono, stereo...)
DWORD nSamplesPerSec; // sample rate
DWORD nAvgBytesPerSec; // for buffer estimation
WORD nBlockAlign; // block size of data
WORD wBitsPerSample; // Number of bits per sample of mono data
WORD cbSize; // The count in bytes of the extra size
} WAVEFORMATEX;
if (readShort(temp, 0) != WAVE_FORMAT_PCM) {
System.err.println("Not a PCM file");
return;
channels = readShort(temp, 2);
sampleRate = readInt(temp, 4);
if (readShort(temp, 14) != 16) {
System.err.println("Not a 16 bit file " + readShort(temp, 18));
return;
// Display audio info
if (printlevel <= DEBUG) {
System.out.println("File Format: PCM wave");
System.out.println("Sample Rate: " + sampleRate);
System.out.println("Channels: " + channels);
dis.readFully(temp, 0, HEADERSIZE);
chunk = new String(temp, 0, 4);
size = readInt(temp, 4);
if (printlevel <= DEBUG) System.out.println("Data size: " + size);
//DP ENd sort wave file
//Now Choose the mode , we have a file sampled at 44100
mode = 2; // Ultra-wideband
// Construct a new encoder
SpeexEncoder speexEncoder = new SpeexEncoder();
speexEncoder.init(mode, quality, sampleRate, channels);
if (complexity > 0) {
speexEncoder.getEncoder().setComplexity(complexity);
if (bitrate > 0) {
speexEncoder.getEncoder().setBitRate(bitrate);
if (vbr) {
speexEncoder.getEncoder().setVbr(vbr);
if (vbr_quality > 0) {
speexEncoder.getEncoder().setVbrQuality(vbr_quality);
if (vad) {
speexEncoder.getEncoder().setVad(vad);
if (dtx) {
speexEncoder.getEncoder().setDtx(dtx);
// Display info
// Open the file writer
AudioFileWriter writer;
if (destFormat == FILE_FORMAT_OGG) {
writer = new OggSpeexWriter(mode, sampleRate, channels, nframes, vbr);
else if (destFormat == FILE_FORMAT_WAVE) {
nframes = PcmWaveWriter.WAVE_FRAME_SIZES[mode-1][channels-1][quality];
writer = new PcmWaveWriter(mode, quality, sampleRate, channels, nframes, vbr);
else {
writer = new RawWriter();
writer.open("junk.spx");
writer.writeHeader("Encoded with: " + VERSION);
int pcmPacketSize = 2 * channels * speexEncoder.getFrameSize();
try {
// read until we get to EOF
while (true) {
dis.readFully(temp, 0, nframes*pcmPacketSize);
for (int i=0; i<nframes; i++)
speexEncoder.processData(temp, i*pcmPacketSize, pcmPacketSize);
int encsize = speexEncoder.getProcessedData(temp, 0);
if (encsize > 0) {
writer.writePacket(temp, 0, encsize);
catch (EOFException e) {}
writer.close();
dis.close();
* Converts Little Endian (Windows) bytes to an int (Java uses Big Endian).
* @param data the data to read.
* @param offset the offset from which to start reading.
* @return the integer value of the reassembled bytes.
protected static int readInt(final byte[] data, final int offset)
return (data[offset] & 0xff) |
((data[offset+1] & 0xff) << 8) |
((data[offset+2] & 0xff) << 16) |
(data[offset+3] << 24); // no 0xff on the last one to keep the sign
* Converts Little Endian (Windows) bytes to an short (Java uses Big Endian).
* @param data the data to read.
* @param offset the offset from which to start reading.
* @return the integer value of the reassembled bytes.
protected static int readShort(final byte[] data, final int offset)
return (data[offset] & 0xff) |
(data[offset+1] << 8); // no 0xff on the last one to keep the sign
AudioFormat audioFormat;
TargetDataLine targetDataLine;
public Class[] getAllReturnedTypes() {
// TODO Auto-generated method stub
return null;
public String[] getParameterNames(String arg0) {
// TODO Auto-generated method stub
return null;
public String getSample(String arg0) {
// TODO Auto-generated method stub
return null;
public String getToolTip(String arg0) {
// TODO Auto-generated method stub
return null;
public boolean isDeprecated(String arg0) {
// TODO Auto-generated method stub
return false;
public String js_Record (String name){
captureAudio();
return "Started Recording " +name;
public String js_StopRecord (String name) throws IOException{
//new ActionListener(){
// public void actionPerformed(ActionEvent e)
//Terminate the capturing of input data
// from the microphone.
targetDataLine.stop();
targetDataLine.close();
// }//end actionPerformed
//};//end ActionListener
// JSpeexEnc ("junk.wav","output.spx");
JSencode();
return "Stop Records " +name;
//Play audio file
public AudioStream js_Playback (String name) throws IOException{
InputStream in = new FileInputStream("junk.wav");
AudioStream as = new AudioStream(in);
AudioPlayer.player.start(as);
return as;
public AudioStream js_ContPlay (AudioStream as) throws IOException {
AudioPlayer.player.start(as);
return as;
//Stop Play
public AudioStream js_Stop_Playback (AudioStream as) throws IOException{
AudioPlayer.player.stop(as);
return as;
//This method captures audio input from a
// microphone and saves it in an audio file.
private void captureAudio(){
try{
//Get things set up for capture
audioFormat = getAudioFormat();
DataLine.Info dataLineInfo =
new DataLine.Info(
TargetDataLine.class,
audioFormat);
targetDataLine = (TargetDataLine)
AudioSystem.getLine(dataLineInfo);
//Create a thread to capture the microphone
// data into an audio file and start the
// thread running. It will run until the
// Stop button is clicked. This method
// will return after starting the thread.
new CaptureThread().start();
}catch (Exception e) {
e.printStackTrace();
System.exit(0);
}//end catch
}//end captureAudio method
// This method creates and returns an
// AudioFormat object for a given set of format
// parameters. If these parameters don't work
// well for you, try some of the other
// allowable parameter values, which are shown
// in comments following the declarations.
private AudioFormat getAudioFormat(){
float sampleRate = 44100.0F;
//8000,11025,16000,22050,44100
int sampleSizeInBits = 16;
//8,16
int channels = 1;
//1,2
boolean signed = true;
//true,false
boolean bigEndian = true;
//true,false
return new AudioFormat(sampleRate,
sampleSizeInBits,
channels,
signed,
bigEndian);
}//end getAudioFormat
class CaptureThread extends Thread{
public void run(){
AudioFileFormat.Type fileType = null;
File audioFile = null;
//Set the file type and the file extension
// based on the selected radio button.
//if(aifcBtn.isSelected()){
// fileType = AudioFileFormat.Type.AIFC;
// audioFile = new File("junk.aifc");
// }else if(aiffBtn.isSelected()){
// fileType = AudioFileFormat.Type.AIFF;
// audioFile = new File("junk.aif");
// }else if(auBtn.isSelected()){
// fileType = AudioFileFormat.Type.AU;
// audioFile = new File("junk.au");
// }else if(sndBtn.isSelected()){
// fileType = AudioFileFormat.Type.SND;
// audioFile = new File("junk.snd");
// }else if(waveBtn.isSelected()){
fileType = AudioFileFormat.Type.WAVE;
audioFile = new File("junk.wav");
// }//end if
try{
targetDataLine.open(audioFormat);
targetDataLine.start();
AudioSystem.write(
new AudioInputStream(targetDataLine),
fileType,
audioFile);
}catch (Exception e){
e.printStackTrace();
}//end catch
}//end run
}//end inner class CaptureThread
} -
How do I play an audio clip embedded in a PDF file in Acrobat DC for iOS?
It looks like playing audio clips from PDF files is currently not available on Acrobat DC for iOS, could this be enabled?
Also it would be nice to be able to pause/restart/stop audio playback, see audio clip length and progress bar and jump to the desired position.
ThanksUse a SwingWorker:new SwingWorker<AudioClip, Void> () {
protected AudioClip doInBackground () throws Exception {
return Applet.newAudioClip (new URL ("http://www.geocities.com/darrylbu/sounds/ringout.wav"));
protected void done () {
try {
get ().play ();
} catch (ExecutionException ex) {
ex.printStackTrace();
} catch (InterruptedException ex) {
ex.printStackTrace();
}.execute ();Depending on your need, you may want to make that a named class AND/OR assign it to a variable reference and call execute separately AND/OR you may want to call loop () instead of play () inwhich case you may want to assign the AudioClip to an instance field so that stop () can be called from any method.
For a console app, I would have recommended a Thread:new Thread (new Runnable () {
public void run () {
try {
Applet.newAudioClip (new URL ("http://www.geocities.com/darrylbu/sounds/ringout.wav")).play ();
} catch (MalformedURLException ex) {
ex.printStackTrace();
}).start ();The same reasoning applies.
Please read the API for anything you're not familiar with, and get back if you have any questions.
db -
Facebook has challenged the copyright of a movie using iMovie audio. Am i allowed to share movies made using audio clips from iMovie?
Just curious as to why it's coming up as a copyright violation?
Hard to say. I think FaceBook errs on the side of abundance caution when they detect anything that sounds like music.
It's also possible to that people use samples of various pieces of iLife audio contest to create a piece of work that they then copyright.
Matt -
No sound when playing burned DVD with Windows Media Player
Hello!
I made a 10 minute movie which I burned , tested and delivered today.
But it turns out that when playing the DVD with WMP, there is no sound.
I had tested the movie playing it with powerDVD, and it worked as it should. When playing it with a normal DVD player and TV it works allright.
But I had not tested it with WMP. And sure enough, when playing it with WMP there is no sound!
The ones who will show the DVD will do it from a computer to a video projector, and maybe they don't have a "proper" DVD program installed. But I heard that there was sound when playing with "VLC" which is a relief.
But I feel the need to get to the bottom of why there is no sound with WMP? Any clues?In NTSC-land, one has but two choices: PCM/WAV or DD AC3, which is a particular "flavor" of MPEG. In PAL-land, one does have the option of MPEG (not DD AC3) as an option, but that seems to be falling out of favor.
When MS was re-tooling WMP, they wanted to add back the functionality of commercial (pressed/replicated) DVD's, but sought to limit any burned DVD's. Do not know what the mindset is now, so much could have changed with a few iterations of WMP. I have to admit that I just do not reach for it that often.
In the Project, or Disc, menus, one can tell En which Audio Transcoding to use. As John T, suggests, I would definitely do a test with PCM/WAV, and X my fingers.
If your client(s) is/are set on WMP as the player, there is hopefully a scheme that you can get to work. Also, remember that some older versions of WMP might not play the DVD at all, unless one finds the right plug-in, that basically hacked the intended setup in those older versions. Just like when delivering to a client, and not knowing their systems' calibration, or setup, trying to cover every base in a particular player software might involve a lot of work, and prayer.
Good luck,
Hunt -
Playing the audio file from the point of mark
Hi All, i want to play a audio file from the point of mark.
i have used mark() method to mark but when i play the audio it is still playing the audio from the starting point. please help me.Hi,
Question:
1. You have a folder for each DVD whose video contents you edited.
Answer: Yes
Question:
You talk about projects 34, 35, 36, 37. Are these projects associated with only one specific DVD?
What is supposed to be in each project - just edited VTS_01_1.VOB or edits from the others in the series
such as VTS_01_2.VOB, VTS_01_3.VOB, etc.
Answer:
Project 34 has edited Premiere Elements file 34 and the VOB files (VST_01_1.VOB, VTS_01_2.VOB, etc) from DVD#34
Project 35 has edited Premiere Elements file 35 and the VOB files (VST_01_1.VOB, VTS_01_2.VOB, etc) from DVD#35
Project 36 has edited Premiere Elements file 36 and the VOB files (VST_01_1.VOB, VTS_01_2.VOB, etc) from DVD#36
etc.
Question:
2. If you screen each DVD video file VOB for a given DVD disc, does the content follow sequentially and cleanly?
Answer:
Yes
When I run the VST_01_1.VOB, VTS_01_2.VOB, etc from each project the audio and the video are clean and match.
When I run the edited Premiere Elements file that were created after project 34 edited Premiere Elements file project 35, 36, 37 etc. I am getting the audio from project 34
When I run the edited Premiere Elements file that were created before project 34 edited Premiere Elements file project 1, 2, all the way to 33. I am getting the correct audio
Thanks,
Ron -
Drag & drop audio clip from timeline to project window ?
i no longer can drag a clip from timeline to the project window & then breakout the clip to mono by selecting clip - audio options- breakout to mono - now when i drop an audio clip from timeline into the project window it does not show up anywhere in the project window - did an update get rid of this function ? it was much better than having to go back to the unedited original source & start from scratch ...
thanx for your time Jim - i understand that would be the preferred method but that was a quick fix until recently i have noticed that i can no longer do it by just grabbing the edited clip & drop it in project window so that i can modify just that portion of the original files properties - it still functions that way on a friends machine - was just kinda weird that i can't get it to work that way any more …
-
Editing Multiple Audio Clips From Premiere in Audition
Hi there,
I am working with video/audio in Premiere that has frequent cuts (although the audio is derived from two files) and I need to edit all the audio files at once, rather than one by one, in Audition. I was hoping to this by nesting the audio in Premiere but I am not able to edit the nested file in Audition after this.
If anyone has any ideas of how to work with and apply the same properties to multiple audio clips from Premiere in Audition I would greatly appreciate it.
Thanks...Hi everyone, I also have a trouble with cs6. I just record 3 tracks in the early today, then when I got home, I saved as sexs file ( wrong decision). After that, I went back and try to open the file, it can't file the recording tracks. The only one thing still exist is my beat, what should I do to recovered it? thanks for helping me out of this.
-
PSE13: no sound when playing AVCHD videos
In the PSE 13 Organizer I'm not getting any sound when playing AVCHD files:
These files play just fine in PSE12
These files play just fine in Premiere Elements 13 and 12
The files are from various cameras (Sony RX100M3, Sony and Panasonic camcorders)
Other video formats work fine (e.g., .wmv, .mov files from an iPhone, .avi etc)
Any ideas? A quick search indicates this problem has occurred occasionally over the last several years across various versions of PSE.
ThanksHi Anewsha
I use .mts.
To clarify : The problem occurs in the organizer part, where sound
disappears after palying 30 seconds. I run a fairly powerful computer, Core
i7, 16 G Memory with NVIDIA GeForce GTX 750
BR Ulf
2015-02-11 16:02 GMT+01:00 yossi000 <[email protected]>:
PSE13: no sound when playing AVCHD videos created by yossi000
<https://forums.adobe.com/people/yossi000> in Photoshop Elements - View
the full discussion <https://forums.adobe.com/message/7184570#7184570> -
haw do i get a refund for an app that do not work properly.
i tryed all the troublesooting and still not working properly
the app is T3 magazine ther is no sound when playing the articles on the player
thenksFOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Getting Refunds for your iTunes Store Purchases
http://www.labnol.org/software/itunes-app-store-refunds/13838/
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
Cheers, Tom
Maybe you are looking for
-
Error while scheduling data in QA
Hi Experts, I am having this problem while Scheduling data in QA. I tried activating Infosource in se38 with program rs_transtru_activate_all but still i am getting the below error, can anyone let me know why is this happening.... Diagnos
-
Does apple care warranty cover mighty mouse?
hi. as many has experienced, i experienced problems with scrolling up and/or down w the mighty mouse. i tried to clean it with a few methods, and the one that worked was when i used a clean piece of paper, turned the mouse upside down, and rubbed it
-
Hello, When I create a new PO with CO01, I have to release manually each PO with CTRL-F1. I know there is a way to perform an automatic release during the creation of the PO (it worked on our previous system). Could you please let me know how I can f
-
How to fix non-working CS6 product Help menus
I had been running the CS6 Master Collection trial download version. I could not access the "Online Help" and "Support Center" choices in the main Help menu on any of the CS6 applications. The options were not working, able to connect, or gave erro
-
HT2474 save files not to desktop
Hi, I just bought a Mac (OS X Mountain Lion). I saved some old files from a flash drive onto my desktop. My question is: how do I move those files off my desktop and save them elsewhere to declutter the space? They are not files I access on a regular