No sound when ripping dvd to mp4

i have found this problem with several movies, can post list if wanted.
i mostly dvd2pod without any problems, but with these i have also tried handbrake and handbrake lite and still no sound. video is ok.
united 93 is even odder: have video in the beginning, but as the movie starts, sound goes.
any ideas

You have the latest iPod software?
And you've converted it correctly?
See this for help: Guide to converting video for iPod (Mac/Windows).

Similar Messages

No sound when playing DVDs, yet fine with bluray

my sony bluray does not have sound when playing dvds. it acts fine when using blu ray. any suggestions?

Hello jc1942_69, thank you for your message. Welcome to SONY Community!
For further assistance, please let us know with the model number of your Blu-ray disc player. As alternative, you can check the link below: http://esupport.sony.com/US/p/support-info.pl?info_id=264
However, to troubleshoot your Blu-ray disc player in a general way. Follow the steps below:
1. Turn the Blu-ray Disc player on and make sure the correct video input is selected on the TV.
2. Press the Home button on the Blu-ray Disc player remote.
3. Once the menu is displayed, press the Left arrow button on the remote and navigate to Setup.
4. On Setup, use the Down arrow button and go to Resetting and press the Enter button.
5. Under Resetting, select either Reset to Factory Default Settings or Initialize Personal Information.
NOTES:
Reset to Factory Default Settings option will display another menu where you can reset the current network, audio and video settings on the player, select All Settings if you desire to restore everything.
Initialize Personal Information will erase all personal information stored on the player and some Internet apps.
6. Go through each of the two options if you desire to completely restore the Blu-ray Disc player.
Hopefully this post helps you!

Satellite 1100-Z14: I get the only picture but no sound when playing DVD's

I know mine is a fairly old notebook,but despite updating with latest firmware, I have an intermittent problem when playing DVD's (Reg 2) in that I get the picture but no sound, particularly with some older DVD's.
CD's are ok.
Toshiba repair agent says it is a software problem and they only deal with hardware problems.
Can anyone tell me how I can deal with this problem please ? ( apart from getting a later model ! )

I think I may have stumbled on the problem, I use IntervideoDVD7 and under audio effects there is an option
'Sydney Theatre' etc, I changed it to 'off' and the sound cames back. maybe I should study their manual a bit more !

No sound when playing DVD video

Hi,
I have a K8T NEO2-FIR, Win XP pro. Basic system runs just fine. I have installed an LG DVD-ROM drive model GDR-8163B. When I play a DVD video there is no sound at all. On the other hand, there is sound when playing a music CD. I am using the on-board sound (no additional sound card installed).
I must be missing something pretty basic. Any guidance would be appreciated.

...sounds like you need to configure the DVD playing software (PowerDVD, WinDVD, WMP, etc.)...

Still no sound when converting DVD into Ipod

I'm using Videora to convert DVD's into my Ipod. The sound is not coming out but the movie is. I read the article going around about Muxed files, but this is not the case. I have converted this movie about 3 times. Does anyone else have this problem?

Interestingly enough, when I used Videora to convert DVDs, the movie's audio was replaced (twice, two different completely separate movies) with two mens' voices, while they were chatting about the movie. So, I had to download the movies I wanted via LimeWire, and convert those. That's my only suggestion to you...either that, or spend about $40 on CuCuSoft (really great, you won't regret it).

No sound when creating dvd using compressor 4

I have burned my first FCPX dvd using Compressor. The video came out well though there are no audio files. What am I not doing?

You probably didn't include the Dolby settings for your target when you were creating your Compressor job . If you use the Compressor batch templates, or if you share to DVD directly from FCX, they will do that for you automatically.
Russ

No sound on ripped dvds

After I upgraded to the new Apple TV software the movies I copied using Ripit have no sound. My Apple TV is 2 years old, not sure which version I have.

Hi
What audio and video files did you used in the project? While simulation, did you have audio?
Alberto

Dont Dig The way the Drive sounds When CDs/DVDs Go In It.....

This is my second MBP I had the core dou 17 2.6 and now I have the Core 2 Duo 2.16 15" When I put in a disc man it sounds like something from an old sci fi movie with a robot arm moving like bzzz-zzzzzz-zzzzzzzzzz rrrrrrr ,etc. I guess you get the idea. My 17 inch didnt sound likr this one. anyone else have a real loud sound drive. I really dont care about the moise as much as I dont want to configure this computer how I need it to have it sent out for weeks getting fixed

Gary
From generation to generation the sound of the Optical drives have gotten worse.
Mine works great, but isn't as quiet as my fiance's powerbook, and also sounds like it's "struggling".
Regardless, it works flawlessly...
If the sound is that horrendous, see if you can set up an appointment at an apple store to have someone listen to it... shouldn't take but a few minutes and if it is something defective, they can repair in less then 1 day if the part is in stock.

How to rip DVD to Sansa/iPod/iPhone/PSP/Zune and other MP4 and MP3 Players

This guide shows you how to rip DVD to MP4, AVI, MP3, WMV, WMA, FLV, MKV, MPG, RM, 3GP, and other video/audio formats supported by popular mp4 and mp3 players by using DVD Ripper .
Step 1: Install and run DVD Ripper
Step 2: Import DVD.
Place the DVD into your DVD drive and click the “Load DVD” button to load DVD.
Tips: This DVD Ripper can load three DVD source, you can load your DVD from DVD drive, DVD folder in your PC and also IFO file.
Step 3: Video settings.
Select the output video format you want from the “Profile” drop-down list.
Tips:
1: You can also select Audio Track and Subtitle from their respectively drop-down list.
2: If you like the current image of the video you can use the “Snapshot” opinion. Just click the “Snapshot” button the image will be saved and you can click the “File” next to “Snapshot” button to open your picture. You can select the destination of the picture by clicking the “Preference” button. As default the captured image will be saved at:
C:\Documents and Settings\Administrator\My Documents\Aiseesoft Studio\Snapshot
3: If you want to merge the selected contents into one file you can check the “merge into one file” option. As default the merged file is named after the first selected file (either a title or a chapter)
4: You can click the “Settings” button to set your video parameters.
In the Video Settings, you can select Encoder, Frame Rate, Resolution and Bitrate for your movie
In the Audio Settings, you can select Encoder, Channels, Bitrate and Sample Rate for your movie.
when you choose the specific settings, the lower window will show the "help" to explain the meanings of each setting.
Step 4: Start conversion
Click the “Start” button to start your conversion and in a short while it will be finished.
Step 5: Click “Open” button to open your output destination file.
More tips:
1: Trim Movie
If you just want to convert a clip from your DVD movie, you can click the “Trim” button to open the Trim dialog, you can trim a duration of the selected title or chapter by either dragging the Start Time and End Time sliders or setting the time parameters in each corresponding field.
After you set the trimming time, the length of the captured clip will be shown in the Select Length box for your reference.
2. Movie Effect
If you want to change the original video effect, you can click the Effect icon to set the video brightness, contrast, saturation, etc. You can also set the special effect for your movie to cater to your need.
3. Video Crop
With Aiseesoft DVD Ripper you can remove the black edges around your movie video by checking the “Crop” option, so you can watch your movie on your portable players in full screen.
There are three methods available to crop your video:
Method 1: Crop by selecting a crop mode
Select a crop mode in the crop mode drop-down list and click OK to save the crop. There are three pre-set crop modes
for your choice: No Crop, Cut off top and bottom black edges, Cut off top black edge.
Method 2: Crop by adjusting the crop frame
The crop frame is the dashed line around the movie video. There are four adjustment lines on the crop frame. Each line allows you to crop the movie video from a different position.
To crop your movie video, you can just move your mouse cursor to an adjustment box and drag the crop frame.
Method 3: Crop by setting the crop values
There are four crop values on the lower left part of the crop window: Up, Down, Left and right. You can set each value to crop your movie video, and the crop frame will move accordingly.
Before you start to crop your movie video, you can select an output aspect ratio from the Zoom list. There are four choices available: Full screen, Keep original, 16:9 and 4:3. After you select an output aspect ratio and finish the crop, the result can be previewed in the Preview window of the program main interface.
dvd ripper for mac

Thanks! But when I visit the site recently, I found the program was upgraded. Now it has 2 optimized output formats specially made for iPod 30G and 60G players! Thus it is easier and more convenient to use without complex settings as other software. Try it at http://www.imtoo.com/downloads/dvd-to-ipod.converter.exe
Another good news: there was a new discount suite ImTOO DVD to iPod Suitethat contains both the DVD to iPod Converter and iPod Movie Converter. It saves newly $20! Hope this can do some help

No sound w/ WMP when playing DVDs

The picture looks fine and I have sound when playing music, video & Flash files. Also I have two drives and no sound on either of them and i have tried several different DVDs

Hi rbfeik,
Did you by chance upgrade from Vista to Win 7?
If so, did the DVD player work prior to upgrading?
Did you upgrade using the HP Upgrade Assistant?
I'm thinking you need to install a Win 7 version of your DVD software.
Here is the Win 7 64bit software and drivers page for your PC:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3813...
Look for DVD related software and drivers.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Any ideas why a film I have converted to mp4 format, that plays with sound through my PC windows media file- only has a picture but no sound when transferred to my ipod touch via the Itunes?

Any ideas why a film I have converted to mp4 format, that plays with sound through my PC windows media file- only has a picture but no sound when transferred to my ipod touch via the Itunes?

See:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos

Loud clicking sound when trying to play a DVD

HP Pavilion Ultimate d4995t desktop PC with Realteck High Definition Audio. Vista Premium O/S. I play my sound via my HDMI cable to the speakers in my monitor. When I attempt to play a DVD in the DVD drive, I get a loud clicking noise with no sound from the DVD. This only happens to DVD's. CDs play sound without a problem. If I copy the same DVD files to the hard drive, I can play it from the hard drive and sound works. If I plug in speakers to the audio-out and disable the HDMI output, I can play the DVD in the DVD drive and the sound plays through those speakers without the noise. I have ran Microsoft sound tool without success. Updated all the sound drivers. I reloaded Vista, that corrected the problem. But as time went on the problem came back. I suspect the problem was caused by an Microsoft update. Anyone have any suggestions?
This question was solved.
View Solution.

Hi,
Yes, it happens after installing Service Pack for Vista through Windows Update.
Click Start->'Control Panel -> Sound -> Playback -> Select Realtek HDMI Output, click Properties. Click Advanced Tab above,
Unclick 'Allow applications to take exclusive control of this device', click Apply/Ok.
Check if the issue is resolved, if not, select HDMI Output on Sound Window, click Properties, click Enhancements tab, check the option 'Disable all sound effects', click Apply/Ok.
Thank You.
Kiran Talluri
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer "Accept as Solution" if it solves your issue

Why don't I get any sound when export from imovie to quicktime DVD

Help. I am a new imovie user so hope not being stupid. am using G4 powerbook with OS X 10.3.9. imovie 3.0.3 and quick time 7.1.2. Have made 2 films so far - first exported fine into quicktime with sound. Second exports but without any sound. This film is 5 mins long. It plays fine in imovie, and if exported as low quality for web also records sound (when 188 kg), but big version for DVD gives the problem. thanks for any advice. Sue

Hi Sue: (Nice name)
Welcome to discussions!
It may be that your quicktime is not getting along well with you OS X version...try to revert back to another version of quicktime (BUT- I don't know if this will work with your current QuickTime though)
http://www.apple.com/support/downloads/quicktime652reinstallerforquicktime701.ht ml
(I'll keep checking around for more help...)
Sue

No sound when DVD played on TV

Hi, I don't know if anyone can help.
I am new to creating DVD's, but did this weekend - my band's promo movie. I created the movie and rendered it to High Quality via iMovie HD - the movie includes the audio.
I burnt the DVD by Roxio Toast 6 via an external DVD writer (that always defaults to NTSC format, althugh I am UK based and tried choosing the PAL option to no avail).
When the DVD was put in the Mac it played fine with audio. When put in my DVD player to view on TV, the DVD plays as normal EXCEPT there is no sound!
Does anyone have any ideas why this might be the case, and if there is a solution that doesn't cost squillions of pounds?
Many thanks!
Ian

When the DVD was put in the Mac it played fine with audio. When put in my DVD player to view on TV, the DVD plays as normal EXCEPT there is no sound!
It sounds like your PAL DVD player doesn't like to play NTSC discs.
Take a look at: Exporting your movie for viewing in a PAL or NTSC format at http://docs.info.apple.com/article.html?path=iMovie/HD/en/im110.html
Note it says When you first create a new project in iMovie HD, you can select a video format for the project.
BTW, with Toast 6: select the Video tab. To the left of the window you should see Advanced - Select Advanced - then under Options, select PAL.

BURNED DVD PLAYS WITH SOUND ON PC BUT NO SOUND WHEN PLAYING ON TV ???

BURNED DVD PLAYS WITH SOUND ON PC BUT NO SOUND WHEN PLAYING ON TV - VIA VIDEO PLAYER ??

Hi,
It may be worth trying another burning application to see if this helps the issue.
Download and install the free utility, ImgBurn and use this to create the DVD. Guides on using this to burn to single layer and dual layer discs are below.
Burning DVD Files To Single Layer Discs
Burning DVD Files To Dual Layer Discs
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

No sound when ripping dvd to mp4

Similar Messages

Maybe you are looking for