No sound when video recorded in silent mode

I recently accidentally recoreded a video when I had my phone on silent, when I went to play the video, now with the sound on my phone on, there was no sound in the video. I thought this was because I recorded with my phone on silent but then spoke to a friend about it and he said that it still should have recorded sound and I should be able to hear it as long as my phone's not on silent when I play it. But this isn't the case. I also tried playing the video on my laptop and still had no sound, so for some reason it hasn't recorded any sound. Why has this happened and is there anyway I can fix it and somehow access the sound that should be on that video?

Yeah I had the volume up as loud as it would go and still no sound.
On my laptop it said that there was no audio stream on the video, so I'm guessing it's failed to record the sound?

Similar Messages

No sound when video recording

Since updating the software on my ipad I can no longer record videos with sound. Anyone got any ideas on how to fix this.

I was not getting any sound at all. I just recorded video on my friends iphone and I could totally hear the audio. I did a full restore back to factory settings and it is working now. I'll have to see how it goes.

Camera sound is there even when device is in silent mode ?

Camera sound is there even when device is in silent mode?

Possibly. It depends on what country the phone is from. In some countries, phones are required to make a shutter noise even in silent mode.

When I downloaded 4.3 i lost the sound when I record videos

When I downloaded 4.3 I lost the sound when I record videos

That is the issue. FCP works with footage as a Rectangular pixel setting.
Try this little trick and see if it doesn't solve it:
www.proapptips.com/shane NON-STANDARD CODECS
Shane

I can't get sound when I record video

I can't get sound when I record video

Install the free VLC player and use that.
http://www.videolan.org/vlc/download-macosx.html

I have iPhone 6plus, no sound when I record videos

I have iPhone 6plus, no sound when I record videos

NO, not yet, and when i connected the handfree the sound appeared , but when i removed the sound disappearance again !!!

No sound while video recording on N500!

Hello! I just bought Lenovo 3000 N500 for my sister who is in Germany...I want to check everything on laptop, because I want her to use it to skype me...Everything is lovely, except I can't get sound while video recording...Is it possible this laptop has a webcam, but no integrated microphone? But when I go and use windows sound recorder that comes with Vista it records audio...But I can't get video to work with audio recording in the same time...Anybody there with a solution? Thank you , people!

Same problem. Here's my solution:
For now i record video using an app calle "Video FX Live". It records sounds clearly. Native iphone app still doesnt records any sound.
So this proves the sound issues during video recording or facetime IS an IOS BUG.

I have the 5S and there is a check mark next to no sound when phone is in lock mode that prevents me from getting my calls and messages. How can I turn that off? Clicking it does nothing. Please help! Thanks!

I have the 5S and there is a check mark next to no sound when phone is in lock mode that prevents me from getting my calls and messages. How can I turn that off? Clicking it does nothing. Please help! Thanks!

Thanks for taking the time to try to help me. . I checked and the Do not disturb is off. The check is still there stopping calls from coming in when phone is locked. Any other ideas? Thanks again!

I don't get sound when I record video, but I do on download video recorder apps

So I tried to record a video yesterday for Vine app, and there was no sound, and I thought that's weird, so I tried it on the normal video recorder app, and no sound. I downloaded a video recorder app, and the sound works on that... so what's wrong with my phone? How do I fix that?

Hello there, Mark.
The following Knowledge Base article offers up some great recommendations for troubleshooting issues with apps downloaded from the App Store:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
In your case you may also want to close all apps that are running during the "Restart the App" step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

No sound from Video Recording on iPad Mini

Hi All Apple users,
Just need to check how do i troubleshoot this problem.
I can hear the sound from videos from all other websites and other playback apps.
but when i tried recording a video, the sound just did not project out from my recordings.
it is a mic problem? because i had no problems before. it just so happened one fine day...

why can't you record your video ?
is the option gone?
does it give you an error?
does it show as if it's recording but don't produce a recording in the end?
basicly more info is needed

NO SOUND IN VIDEO RECORDING

I have trouble in the video recording in my iphone...where all the sounds in other areas are functioning..eg.I can do recording in the voice memo..but when I do the video recording ..the sound was not recorded inside..Pls advise...

Same problem. Here's my solution:
For now i record video using an app calle "Video FX Live". It records sounds clearly. Native iphone app still doesnt records any sound.
So this proves the sound issues during video recording or facetime IS an IOS BUG.

Error when running netca in silent mode

I found a type-o in Oracle's documentation for running netca in silent mode. See link:
http://download-west.oracle.com/docs/html/B10811_05/app_nonint.htm#BABJFJID
There is a line that reads:
$ORACLE_HOME/bin/netca /silent /responsefile=/local_dir/netca.rsp
However, it should read:
$ORACLE_HOME/bin/netca /silent /responsefile /local_dir/netca.rsp
Hope this saves you all lots of headaches!
--Julie Johnson

user8909477 wrote:
i am running netca command in linuxGreat. But WHICH Linux???? Surprisingly it makes a difference. Just like asking to talk to a person, and specifying by family name, you might get the mother, the father, the son - and each might give a different response.
>
in /u01/oracle/TEST/db/tech_st/11.1.0/network/admin
i am going to TCPs litener with port 2484.
following error is appeared
so please Guide me to solve this problem.
Oracle Net Services Configuration:
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Are you logging on as root? Are you SU'ing to Oracle or trying to run as riit?
Try logging out - all the way out. Don't stop there, you need to log ALL the way out.
And then log in as user Oracle.
Logging in as root causes all sorts of headaches. Only SU to root, and then only when you absolutely need it.
Now that you have logged out of root, and logged in (not just su'd) to oracle, what happens??

T420 --no sound when video chat with windows live messenger or skype?

there is no sound when i tried to video chat using msn or skype.
I dont know what to do with it .really frustrated
who could help me ?thank you very much

This issue is resolved by installing the latest drivers. Lenovo has the driver and this is in another discussion:
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-sound-card-problem-causing-Skype-crash...
However, the Lenovo ThinkVantage Toolbox thinks everything is current.

Bug or Feature? iTunes doesn't write ID3 Tags when you recorded in VBR mode

When you record music from a CD with iTunes (6.0.4 and 6.0.5) using higher bit rates (High Quality) together with VBR, then the iTunes database initialy shows a correct entry. But if you check the created mp3-files with the Finder application you will see that there is no id3-tag in the file.
When you later move your iTunes music folder, iTunes asks you to modfify everything concerning the embedded infos (id3 tags). If you then say "yes" your database is gone.
I saw a couple of postings where users complain about that iTunes loses the id3 tag when they burn a CD. I think that there has never been a physical ID3-Tag although the iTunes database shows a correct entry.
Is some kind of a bug fix out there or should I use Musicmatch within Parallels Desktop for Mac in order to properly record in VBR mode?

Odysseas,
"But if you check the created mp3-files with the Finder application you will see that there is no id3-tag in the file."
You can't see ID3 tags in the Finder. The data is imbedded in the song file itself.
Regular, commercially produced CDs do not support ID3 tag information. When you insert a CD and it opens in iTunes, the application will go out on the internet and look up the track information in the Gracenote (CDDB) database.
Then, when you rip the CD to an MP3 or AAC etc. the track information is then incorporated into the encoded song file. Using VBR shouldn't prevent the ID3 tag information from being transfered.
However, if you then burn a music CD from that file, the ID3 tag information is lost.
Matt

Importing video recorded in elp mode

i know you can only import video into iMovie recorded in sp or lp mode. does anyone know how i would be able to import something recorded in elp mode?
do i need to buy a different version of iMovie or a different program altogether? I currently have iMovie HD.
any information would be helpful. thanks.
Message was edited by: teneail

Hi t
a. Avoid all other than SP-mode. LP-mode gives severe audio sync. problems and lot's of drop outs.
b. Only way to save Your elp-mode material might be to import it via the analog-out on Your Camera
(has to be same as recorded!) and via an Analog/Digital video bridge as Canopus.
In this case I would try to find anyone that has an ADVC-300 that might repair some drop-outs.
Yours Bengt W

No sound when video recorded in silent mode

Similar Messages

Maybe you are looking for