No sound with apps and alerts unless headphones are in. Everything else works well. I tried resetting but it didn't solve problem.
No sound with apps and alerts. Everything else works. Tried resetting, didn't solve problem. Apps have sound with headphones only
Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
Similar Messages
-
My iPad shows it is connected to the Internet wherever there is free wifi but it is getting up and I can't get it to work? I tried rebooting but it didn't help. Any suggestions?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I tried to find the database files from my old firefox on explorer 7 but any old files I tried came up as can not open or not found. I tried the suggestions from mozilla help about what files contain the info but got the same results. I did reset but all it did was give me the few new things I've done since installing windows 8.
hello, did you install windows 8 on top of another operating system on a single machine and do you have any form of prior backup available?
one thing you could try is to search the whole filesystem (make sure you include all locations, also hidden ones) for the term ''bookmarks*.json'' - if any results show up with a date in their filename that lies before the windows install, you can then likely import them into your current firefox profile. -
Any help would be greatly appreciated
Quit FaceTime:
With the Finder active, hold the Option key down and click on the Go menu. Select Library. In that folder select the Preferences folder. In there look for these two files and trash them:
com.apple.facetime.bag.plist
com.apple.FaceTime.plist
Now try FaceTime.
p.s. there is a separate area for Macbook Pro discussions.
https://discussions.apple.com/community/notebooks/macbook_pro -
anyone have any idea's to fix
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
I was updating to ios7 and my iPad froze. I tried the restart sequence but nothing.
Keep us updated with what happens after letting the battery fully drain.
If it still remains stuck at the Apple logo, try manually placing and connecting the device to iTunes in disk mode.
Putting iPod into Disk Mode
B-rock -
Help!! The update on my airport is 6.3 I think. Shoot me!! I'm in graduate school and it's taking me all day to answer one discussion!!
Airport 6.3 utility requires ipv6 local link to work.
see http://support.apple.com/kb/TS4597
But older express may not show up even then. you need to install 5.6 utility so you can access them as well.
It is tricky but if you google around there are a number of methods listed. Here is what I do.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so. -
I just upgraded my IPhone to IOS 7.1 and now the speech to text function and Siri doesn't work
The microphone icon is white not grey
And when I hit it it only stays on for a split second
Not long enough to dictate a message
It worked fine before upgrade
And works on IPad which I also just upgraded
Help??There are many, many threads on this forum about this issue. Do a forum search for "wi-fi greyed out" and see if any of the solutions therein will work for you. Best of luck.
-
Cannot connect to App Store; says not connected to internet;everything else works fine
I can connect to internet but when I try to access via App Store, the App Store says I must be connected to the internet. Any ideas? Using Macbook Pro OS X 10.8.2.
Yeah, first of all, you running any anti-virus or firewall stuff?
-
My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?
If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
Close all apps completely and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Suddenly no sound from speakers and only from headphones
Hello,
I have a HP 8440p VQ664ET#ABU Elitebook laptop running Windows7 64bit pro.
Since today I'm experiencing the following problem:
1) no sound is heard through speakers when headphones are disconnected.
2) If I connect the headphones, the sounds are heard correctly through them: this is the expected behavior
I don't think it's a speakers hardware problem because I can make the speakers play sounds for one or two seconds like this: while a sound is being played, such as music file for instance, if I move up and down the headset volume cursor (regardless if headphones are connected or not) I can hear the played sound through the laptop speakers for a few seconds, after which the speakers mute again.
So to summarize:
1) Headphones disconnected: no sound from speakers
2) Headphones connected: sound from headphones
I rebooted, suspended and restored without any luck so far.
I'm under the impression that there might be a problem with the headphone jack: it is like the laptop always thinks that the headphones are connected and therefore cuts the output to the speakers.
Any clues?
Thanks
SergioTry installing the sound drivers from the following weblink:
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59649.exe
If the issue persists, try the troubleshooting steps mentioned in the following weblink:
HP Notebook PCs - No Sound from Speakers (Windows 8)
Offers tested solutions that begin by identifying the exact issue, and then adjusting the settings that will resolve the majority of sound problems on a notebook running Windows 8.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!*** -
Today I bought app call starsports app and now I can open app and email to starsports they say not for Canada I ask my refund but they ask me to go with iTunes support team...please can you refund my money back in my account
We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
Purchases are considered final, but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Today I bought app call starsports app and now I can open app and email to starsports they say not for Canada I ask my refund but they ask me to go with iTunes support team...please can you refund my money back in my account..
Welcome to the user to User Technical Support Forum provided by Apple.
For your issue.. Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
I have find the codec installed on my PC do you see an undesirable one I have highlighted the one that seems strange should I uninstall how can I do this safely
Daniel
Codecs audio
Type
Nom
Format
Binaire
Version
ACM
Codec Microsoft IMA ADPCM
0011
ACM
CODEC A-Law et u-Law Microsoft CCITT G.711
0007
ACM
Codec audio Microsoft GSM 6.10
0031
ACM
Codec Microsoft ADPCM
0002
ACM
Fraunhofer IIS MPEG Layer-3 Codec (decode only)
0055
ACM
Convertisseur PCM Microsoft
0001
DMO
WMAudio Decoder DMO
0160, 0161, 0162, 0163
WMADMOD.DLL
6.1.7601.17514
DMO
WMAPro over S/PDIF DMO
0162
WMADMOD.DLL
6.1.7601.17514
DMO
WMSpeech Decoder DMO
000A, 000B
WMSPDMOD.DLL
6.1.7601.17514
DMO
MP3 Decoder DMO
0055
mp3dmod.dll
6.1.7600.16385
Codecs vidéo
Type
Nom
Format
Binaire
Version
ICM
Microsoft RLE
MRLE
msrle32.dll
6.1.7601.17514
ICM
Microsoft Vidéo 1
MSVC
msvidc32.dll
6.1.7601.17514
ICM
Microsoft YUV
UYVY
msyuv.dll
6.1.7601.17514
ICM
Codec Intel IYUV
IYUV
iyuv_32.dll
6.1.7601.17514
ICM
Toshiba YUV Codec
Y411
tsbyuv.dll
6.1.7601.17514
ICM
Codec Cinepak de Radius
cvid
iccvid.dll
1.10.0.13
DMO
Mpeg4s Decoder DMO
mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
mp4sdecd.dll
6.1.7600.16385
DMO
WMV Screen decoder DMO
MSS1, MSS2
wmvsdecd.dll
6.1.7601.17514
DMO
WMVideo Decoder DMO
WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
wmvdecod.dll
6.1.7601.18221
DMO
Mpeg43 Decoder DMO
mp43, MP43
mp43decd.dll
6.1.7600.16385
DMO
Mpeg4 Decoder DMO
MPG4, mpg4, mp42, MP42
mpg4decd.dll
6.1.7600.16385
De : sarika02
Envoyé : 17 juin 2014 19:26
À : Daniel Cloutier
Objet : On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
created by sarika02 <https://forums.adobe.com/people/sarika02> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6466796#6466796> -
Running my 3rd generation iPad on iOS 7.0.4, I saturated all the available iPad screen space (which would be the 15 home screens or desktop worth of space) with apps, and the apps that got bumped out of the last screen space mysteriously disappeared. Where are those missing quick lauch app icons now? The apps are still installed and can be searched/accessed through the finder, but they no longer have a user friendly access. How can I solve this problem?
Christopher Doryan wrote:
Hi Hexonxonx, thanks for trying to help, but next time please read the entire discussion, in oder to better comprehend what is being asked. The reason being is that your answer added nothing to what had already been mentioned.
Like I said, I was aware it was possible to access the apps through the finder, but the question revolved around how to recover the quick launch app icons for certain vanished apps.
Wow, kind of a snotty response to someone who was taking their own time to offer help. Whether you thought it was helpful or not, didn't deserve such an unkind retort. Maybe when you realize we all just users here trying to help others like you, who have issues and we don't get anything in return for the countless hours some people here spend offering that assistance, you'll maybe be a little less quick to be critical.
Just sayin.......
Oh and Meg offered the right answer. Put your Apps in Folders, which will create extra space for the apps which have disappeared.
Maybe you are looking for
-
until yesterday the program was fine, but nothing changed and I can not interact with Labview (version 8). Ctrl-E would not switch to diagram, string ctrl or number ctrl would not take anything. I move my mouse onto the ctrl and click, the screen jus
-
On my IPad 2, I can not access the keyboard to send or reply to an e-mail. What am I doing wrong?
On IPad2, I have not been able to access keyboard to send an email. What to do?
-
I have been researching this issue for quite a while. The basic issue is that when trying to login to Bank of America website I get the following error: "Your browser sent a query this server could not understand. " I get this regardless of the brows
-
My itunes music which was on an old PC and lost it all and had to re-install new itunes but cannot upload music from my ipod back into itunes to re-create my playlists again....how can this be done?
-
SRM : Disable Graphical approval preview for SC/PO/INV
Hi Experts, We are using SRM 5.0, We want to disable Graphical approval preview and application by default should pick Table approval preview . please advise, how this can be achieved. Object : SC/PO/INV Regards Kumar