No sound with email messages

Open the settings App > Notifications > Messages > Text tone. Make sure you have it set.
If so, Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

Similar Messages

Can't get sound on emails, messages and alerts on iPad 1

My iPad doesn't have sound onr emails, messages or alerts

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

I restarted my iphone and when it booted back up i received a loud pining sound with a message stating please give me back my iphone. it popped up for a second and went away.

I just restarted my iphone because of lag and when it popped back up there was a loud pinging sound with a message that appeared that stated give me back my iphone. It went away after a few seconds and the sound stopped. I restarted 4 times since then to see if it happened again but it never occured.
After doing a bit of looking around online i noticed that messages like these appear through the find my iphone app. I bought the phone new a year ago from my provider and broke it right out of the box and everything so i know didnt buy a stolen phone or anything.
Help or adice on the issue would be greatly appreciated.
Thanks.

Thanks for the response. I thought about maybe i was somehow messing around in icloud but i dont quite recall doing that but with new toys you never know what you may press. I just wanted to see if there was some sort of glitch going around perhaps.
I've changed my passwords for all my accts to be on the safe side as it is looking like there is no glitch that may cause this.
it's beginning to look more and more like it was caused by a person.
thanks a bunch.

Need to attavh a file with email message

Hi All,
I need to attach a file to the email message, for the same I am using the function module SO_OBJECT_SEND.
but coudl not succeed.
Can any one have insight over the function module that how I can use it for a attching a mail to email message.
Please suggest your thoughts on the same.
Thansk,
Sandy.

Try with FM SO_NEW_DOCUMENT_ATT_SEND_API1
Sample code
data: IS_DOCDATA   type SODOCCHGI1,
        IS_RECEIVERS type SOMLRECI1,
        IS_RECEIVERS_COPY type SOMLRECI1,
        IT_RECEIVERS type table of SOMLRECI1,
        IS_CONTENT   type SOLISTI1,
        IT_CONTENT   type table of SOLISTI1,
*500369789+
        l_txt(255)    type c,
        lt_objpack    TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
        lt_objhead    TYPE TABLE OF solisti1   WITH HEADER LINE,
        lt_objtxt     TYPE TABLE OF solisti1   WITH HEADER LINE,
        l_tab_lines TYPE i,
        l_att_type LIKE soodk-objtp.
*500369789+
IS_DOCDATA-OBJ_NAME = 'MAIL'.
IS_DOCDATA-PRIORITY = 5.
IS_DOCDATA-OBJ_LANGU = SY-LANGU.
IS_DOCDATA-NO_CHANGE = 'X'.
IS_DOCDATA-OBJ_DESCR = SY-CPROG.
loop at IT_MESSAGE into IS_MESSAGE.
    clear : IS_CONTENT, l_txt. "500369789+
    move is_message-line to l_txt. "500369789+
   move IS_MESSAGE-LINE to IS_CONTENT-LINE. "500369789-
    move l_txt to IS_CONTENT-LINE. "500369789+
    append IS_CONTENT to IT_CONTENT.
endloop.
*---select_email_address
select single
         EMAILADDR
         CCEMAILADDR
    into (IS_RECEIVERS-RECEIVER, IS_RECEIVERS_COPY-RECEIVER)
    from ZGL_EMAILCTRL
   where IDENT = ''
     and ZPROGRAM = 'Z_L_SO_CREA'
     and ACTIVE = 'X'.
if IS_RECEIVERS-RECEIVER is not initial.
    IS_RECEIVERS-REC_TYPE = 'U'.
    IS_RECEIVERS_COPY-REC_TYPE = 'U'.
    IS_RECEIVERS_COPY-COPY = 'X'.
    append IS_RECEIVERS to IT_RECEIVERS.
    append IS_RECEIVERS_COPY to IT_RECEIVERS.
*500369789+
   lt_objhead-line = 'USA Order Report'.
   append lt_objhead.
   DESCRIBE TABLE lt_objhead LINES l_tab_lines.
   CLEAR lt_objpack-transf_bin.
   lt_objpack-doc_size = STRLEN( lt_objhead ).
   lt_objpack-head_start = 1.
   lt_objpack-head_num = 1.
   lt_objpack-body_start = 1.
   lt_objpack-body_num = 1.
   lt_objpack-doc_type = 'RAW'.
   APPEND lt_objpack.
   l_att_type = 'RAW'.
DESCRIBE TABLE it_content LINES l_tab_lines.
READ TABLE it_content into is_content INDEX l_tab_lines.
lt_objpack-doc_size = ( l_tab_lines - 1 ) * 255.
lt_objpack-doc_size = lt_objpack-doc_size + STRLEN( is_content ).
lt_objpack-transf_bin = 'X'.
lt_objpack-head_start = 1.
lt_objpack-head_num = 2.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = l_att_type.
lt_objpack-obj_name = 'ATTACHMENT'.
concatenate 'Usa' SY-DATUM6(2) SY-DATUM4(2) into
lt_objpack-obj_descr.                   "#EC *
APPEND lt_objpack.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
     EXPORTING
      document_data              = IS_DOCDATA
      commit_work                = 'X'
    TABLES
      packing_list               = lt_objpack
    object_header              = lt_objhead
      contents_txt               = lt_objhead
      contents_bin               = it_content
      receivers                  = it_receivers
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.

Edits to To Dos associated with email messages don't persist

Here are the steps to replicate this problem within Apple Mail (the latest version - 4.3 on OS X 10.6.4):
1) Select some text in an email message, and click the to do button in the toolbar to turn it into a to do. This to do now appears in the list of to dos visible when you click 'To Do' under 'Reminders' in Mail's left hand sidebar.
2) Return to the email message, and edit the to do visible at its top. The to do text has changed when you view it via the email message, but if you again look at the list of to dos via Mail's left hand sidebar it has not - only the original to do text is visible. And if you then return to the email message, the do has returned to its original text.
Any help/pointers for investigation much appreciated

Sorry no help just noting that I have excately the same problem. However I am still on Leopard with Mail V3.6. I suspect one of the recent "security" updates screwed the way how Todo notes are shared with Mail and Ical...
I can also edit the Todo message with Ical and the changed text appears instantly in Mail. Just editing within a mail-message with the little yellow box above is not working. However I can change priority and due-dates but not the text....
weird stuff.... anyone has an idea? Thanks. Emilia

Bombarded with email message

I did something ....I HAVE NO IDEA WHAT!!.......tried to makes some changes with one of our email accounts....... now I get messages from RIM as follows:
This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.
BEGINETP 114
AQ3DYGUAAAAAIBAIMzFBRTI0MjQgF2xhdGl0dWRlc0BlYXJ0aGxpbmsubmV0AB2CMblQBUNN
SU1FA0CAgICAMgAAMDRDRTIzODUyK0crNAAeBBA+lMPTi3kKYxrg6O+5ABmzy4ZSXy2uquzx
AkrxcFNl
ENDETP 1616345198
EDIT: Removed excess line breaks
Message Edited by Andy on 10-27-2008 08:18 AM

Reason : You have installed Desktop Manager using the 'Desktop Redirector' option.
Step 1: If you're not using Redirector, you should uninstall Desktop Manager and then reinstall it using the BlackBerry Internet Service option.
Step 2: On your device, go to: Options > Advanced > Service Book, and delete all service books for [Desktop]
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sound with sms message bubble

I just got an iphone and when I send a sms message an alert sound goes off when it is sent. I've tried to go under the sound settings to turn it off but it still sounds unless I turn all sounds off. Is there no way to turn it off with out turning all sounds off?

Correct - there is no setting to turn off just that sound. Apple would need to add that feature.
You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

Maverick interfering with email messages.

Since installing Maverick a few days ago, every time I send a new email (in Mail) two entries of the selected name appears in the "To" box. This is annoying but deleting the second name sends one message. However, add a couple of pics from iPhoto, delete the additional (second) name from the To box still sends the recipient two identical messages. This unnecessarily eats up the recipient's monthly GB allowance.
I have just spoken to an Apple Tech Support lady and I don't think she could offer me a resolution, the cure she advised is iCloud related via Maverick and not yet resolved. I don't imagine I'm the only customer affected - or am I ?
Can anyone shed any light on this difficulty ?

Luckily, I have Apple Care, I rang the help line and my problem was sorted.
When I enter a new name in my Contacts folder, in order to find people quickly, I insert the surname first and then a comma then TAB (to separate them) then insert the christian name, viz:
Brown, Warren. This worked fine until I updated to Maverick.
Maverick doesnt like this, I was advised to delete the comma at the end of the surname but keep it separate from the christian name, i.e., two boxes.
So I reworked my contacts list and removed every comma, new messages now show only one entry per person.
I wish Apple would leave well alone !
They've stuffed up the way iPhoto and iTunes used to work, NOT HAPPY !

Only vibrates does not ring or sound with text even with tones selected

HELP!!! My phone is not on silent or do not disturb but it only vibrates and does not ring or sound with text messages All sounds have been selected correctly. Any idea what could be wrong?
Thanks!

I don't have sound anymore either. The mute button is in the correct position, the sounds are all on and the volume is all the way up. iTunes plays but I only get vibrations when a call or text comes through. I tried resetting but it did not solve the problem.

Email messaging fault

I have created a java exe, through jbuilder 9 enterprise. The program seems to execute fine and creates no exceptions, however when it is run from the commmand line it comes back with "email messaging fault". I am using the latest versions of mail.jar and activation.jar, on an NT machine and am using outlook 2000 for email. Would appreciate any incite someone has on this subject.
thanks
E Thompson

Post the full stack trace

Process Chain - Email Messaging

Hi Gurus,
We have implemented the Process chain with Email messages (Success or Failure). We are getting the entire log message of the process chain instead of just 1 line message (Load of 0FIAP is success).
Is there a way to suppress the message when it send the email.
Please advise.
Thanks. Gowda.

I personally like to receive all of that data if I need to look at it. So, what I do instead is have a meaningful header/title for the message. Something like <system>: <success/fail>: <chain name>.
So, if I was in production (system BWP), with chain ZBW_MASTER_DATA and it ran successfully, I would see an e-mail titled:
BWP: Success: ZBW_MASTER_DATA.
With this, I know the message came from BWP, the chain ran successfully and it was ZBW_MASTER_DATA.
No need to look at the message at all. Unless I received BWP: Fail: ZBW_MASTER_DATA!
Sorry, I didn't answer your question, but I hope I made your life easier in the long run!
Brian

Possible to change default alarm from "Message with Sound" to "Email"?

I was wondering if there is a way to change the default alarm when creating an event in iCal, from "Message with sound" to "Email". The option is not available in preferences, and I was just hoping that there might be a way to change the default, using Terminal, and if not, perhaps there is another way. If anyone knows of a way to accomplish this, I’d sure appreciate it.
Thanks very much for your help.

Your not alone - I'm also looking for a solution to this problem.

HT5858 I have had difficulty launching sites from within my email messages. So, in trying to revert to the default settings on my iPad I went into "Settings" and reset everything. Now, I have a black screen with a white apple and a white line! What do

For the last severl weeks I have had difficulty launching sites from within my email messages. Thinking that I may have gone into "Settings" and set something wrong, I decided to reset to the default settings. So, in "Settings" I chose reset everything. Now, when I turn my iPad on all I get is a black screen with the picture of a white apple and a white line below it. Nothing else works. What can I do? Do I need to send this back to Apple to be restored?

You will hopefully be able to restore it yourself. It sounds like you erased all constant and settings rather than resetting all settings. But I'm basing my theory on the fact that you are seeing the Apple logo with the white progress bar (the white line) on the screen. That's what you would see if the software was being reinstalled and then it stopped on you. If that is what happened, you need to restore again and most likely need to use recovery mode.
You can read about recovery mode here.
Recovery mode - Apple
However ...... If you are seeing the white line when you turn the iPad, let it go for twenty minutes or so, before you try restoring again. There is possibility that the software is still be installed and it can take a while before you see that white line move at all indicating that progress is being made.
Frankly, I don't think that the software is still being installed, but since you didn't say specifically how long the iPad has been like this, it could just be that the software hasn't finished installing yet. If you know better - meaning that it's been like this for hours or longer, then you do need to restore the device.

Is it possible to play different sounds for emails and instant messages ?

Hello,
I was wondering if it was possible to play different sounds for emails and instant messages. I am using Thunderbird quite often with both emails and instant messages imported from Gtalk.
I think it would be very convenient to be able to distinguish both sounds as they do not imply the same things.
Thank you very much.
Olivier Hubert.

There are only six chat add-ons, three of them are about notifications. Pick one you think will do the job for you. https://addons.mozilla.org/en-US/thunderbird/extensions/chat/?sort=popular

Problems with You Tube Videos received in email messages

I'm having problems with You Tube when I receive as part of an email message. Sometimes I don't get sound. Also, When I click on the file or link, it takes forever to open and then it starts loading, which also takes so long. I usually give up and delete the message. Am I doing something wrong? can someone help?

Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Then from your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Deta
Quit and relaunch Safari to test.

No sound with email messages

Similar Messages

Maybe you are looking for