No sounds after lollipop upgrade

Updated my t2 ultra to lollipop and now the earpiece is not working and music and videos not producing any sound. Only getting sound through earphones. Please help

Check if there's any dirt or someting inside the 3.5 jack, and also repair your phone with PCC PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355

Similar Messages

Why My iPhone 4 doesn't have sound after I upgrade it to IOS 7.0.2

Why My iPhone 4 doesn't have sound after I upgrade it to IOS 7.0.2?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

Front cam deteriorated after lollipop upgrade

Afte lollipop upgrade front cam pictures are very sloppy and blurry . Previously they were much much better now the picture quality is too bad as if I am using a 0.2 pixel cam
Has anyone faced this issue pl help me

I can assure everyone here that both the cameras are WORKING PERFECTLY FINE with me in fact after lollipop upgrade, the main camera has become much much much more awesome!
Have a look at my Z1 cam's improvement - http://i.imgur.com/6Cor3JK.jpg
Either the phone is still not updated correctly, or you have some wrong settings in your 'manual camera settings'
Try this - Clear defaults, cache, and settings for your phone's camera application and try again.
P.S. I was using GoogleCamera for these photos in kitkat and in lollipop as well (link attached)
Feel free to ask away :-)

No alarm sound notification after lollipop upgrade

I am unable to hear my alarm sound after upgrading my z2 to lollipop. Interruptions are set to all yet this.
Kindly help.
Solved!
Go to Solution.

What if you try a different alarm sound?
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

How to Reinstall Lenovo Security After Lollipop Upgrade?

I upgraded my lenovo s60a from kitkat to lollipop but after the upgrade, lenovo security was removed/ uninstalled. I can't find it again. I really like this app and need it badly. How to install it again? please help
Regards
[Moderator changed title to describe topic.]

I really loved the Lenovo Security App too. However, it is no longer available in the Android L update (for all international phones, not only S60-A, but most (or all) of the other models with Android L as well).

Crackling sounds after 761 upgrade

The crackling sounds are still there after an upgrade to 761. This is very dissapointing.
perk

OK. Thank you for your answers. We will see if there will be a solution to this annoying problem. (I have seen in privious posts under the subject Problem: Notification Sounds and Ringtones that this would be solved in the next upgrade after .757 (ref. Richard from Sony)).
perk

Ringer has no sound after ios7 upgrade

Ringer has no sound after ios 7 upgrade

Did you figure out how to fix this problem because I have the same problem and I am very upset. My daughter was sick and the school called and because of this problem I missed the call.

Chrome browser missing tabs after Lollipop upgrade

Hi
Chrome now hides the option to close a tab or jump to another one. Any fix?
Thanks!
Cheers,

Chrome Tabs were moved after Lollipop to the Recent Apps screen (the 2 rectangulars soft button on the right). They will persist even if you restart your phone. You just switched off this feature and can get it back by turning tabs merge on again.

NO Sound after Bios Upgrade

After updating Bios to version 2.00 there's no sound through Speaker if I switch to headphones, sound it's OK. If I suspend the PC, sound its back for almost 5 or 10 minutes then it goes.
If in Smart Audio app, I switch audio mode from Classic to Multi Stream, sound its back but after sometime it goes, just like if I suspend the PC. SO I think it's not an Speaker Issue.
PS: Tried reinstalling Audio Driver but no Luck same Problem.
The Laptop is a:
Toshiba Satellite C645-SP4131L
No Hardware Upgrade
Win 8 Pro (Clean Install) (Drivers are from Toshiba One Click Upgrade) (This problem also occurs in Win 7 and a Live CD of Ubuntu)

The only way to know for sure if it's a hardware or software issue is to try a system recovery. If the problem persists, you'll know it's a hardware issue (including a BIOS issue).
- Peter

No digital sound after Vista upgrade on Audigy Platinum

I finally got around to upgrading my Media Center PC from Win XP to Win Vista Ultimate x64. Following the upgrade and after installing the latest official drivers for my Audigy Platinum, I am unable to get any sound when using the digital out on the sound card. I also made sure to change the Audio Console setting to use SPDIF. If I switch to normal line out, it works fine and digital out worked fine on Win XP.
I tried searching but only came up with threads pertaining to the X-Fi and Audigy 2.
Is there something else Im missing to get this working in Vista?
Thanks a bunch!!

Hi there-
I just finally had the chance to install these drivers and I still have no sound coming out when I connect to the digital out of my Audigy card. Again, Ive verified the Audio console has been changed to SPDIF output and still nothing.
Is there something Im missing here? Are there other settings I need to change / set in Vista to get this working? This is very frustrating that this worked without issue in XP and I really dont want to have to go back to it.
Any help is much appreciated!!

[SOLVED] No sound after massive upgrade

Hello,
I'm just writing to ask for some information about my problem. Recently I upgraded my ArchLinux system after a while without doing it.
My surprise came when, after rebooting my system is without sound. No sound anywhere. Both the speakers and the volume are turned up at the maximun and there's still no sound.
I would appreciate any information you could give me to solve this problem which is killing me.
Also say that before the upgrade the sound was working perfectly.
Here's my rc.conf file:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="es_ES.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Madrid"
KEYMAP="es"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(vboxdrv)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="WORK_GROUP"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(vboxdrv syslog-ng dkms_autoinstaller !network !netfs dbus @wicd @alsa kdm @crond preload openntpd)
Thanks
PS: Sorry for my English, it's not my first language
Last edited by eherranzr (2012-07-07 11:25:45)

DSpider wrote:
Are you in the audio group?
$ groups
Sure, I'm in the audio grup:
groups
lp wheel network video audio optical floppy storage power users
DSpider wrote:Try to follow the wiki as closely as possible. Install alsa-utils, run "alsamixer" and make sure no channels are muted (no "MM").
This is what I tried the first but everything seems okey:
DSpider wrote:$ speaker-test -c 2
speaker-test -c 2
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 16384
Period size range from 1024 to 1024
Using max buffer size 16384
Periods = 4
was set period_size = 1024
was set buffer_size = 16384
0 - Front Left
1 - Front Right
Time per period = 5,632541
0 - Front Left
1 - Front Right
Tried it also, but no sound in the speakers.
drcouzelis wrote:
My sound card stopped working today after I updated. I was surprised because my soundcard always worked before. My music player (audacious) said something like "No audio device available".
I had to reboot 2 times. After that, my sound card worked again. I don't know why.
I don't know if you have the same problem as me, but we both had a similar problem on the same day doing the same thing (working sound card -> update -> no sound). Maybe it's just a coincidence?
What a shame but that was not the solution, my computer has been rebooted more than twice since then and still no sound

Xperia z1 compact email problems after lollipop upgrade

Hi there,
I have one huge issue with the email accounts I manage on my Z1C after upgrading to Lollipop.
Downloading new messages used to be extremely fast with Kitkat. Now with the new OS, this has turned into a nerve-racking operation.
Sometimes I have to try three, four times before messages are actually downloaded. Besides, while a tone announces the presence of new messages, these are not displayed. I have to open an old message and then go back to the main page, wait for it do reload and eventually I can see the new messages visualised.
The whole opearation may take several minutes. If this happend on a normal browser, I would immediately think of a problem with the cache memory...
I add that the upgrade procedure was smooth and ended successfully. All the other apps work perfectly, the connection to the Internet is fast and efficient, the problem occurs both when I'm connected to a Wi-Fi router and when I use my provider's network (H3G). I use the default application to manage all my email accounts. The email accounts are set as IMAP.
Have you experienced any similar issues? Does anybody have any idea of how to sort out this problem. Thank you all for your help!

I've experienced this problem also. The new version of Email saw all of my Gmail messages as new mail, so it took about an hour for me to deal with the barrage of new notifications. After that was dealt with, Email now works... but it's incredibly S... L... O... W. Message downloads used to be a snap, but now it can take 20 to 30 seconds just to download a half dozen new message headers. When I actually tap a message header to open the mesage, it takes another 10 to 30 for the message text to display.

Amazon Apps after Lollipop upgrade

I can't sign into any Amazon app after upgrade to lollipop. My keyboard won't pop up to enter the email address of the account. Anyone else have this problem?

This is coming off a factory reset, so that should be the problem. Tried anyway and didn't work. Can't uninstall and reinstall app because its a factory app.

Issue with WIFI after LOLLIPOP upgrade Z3C

Z3C, upgraded to Lollipop and WiFi became slow, speed went down from 80 mbps to 3 mbps !!!
Phone seems sluggish in general, KitKat was fantastic, now I have a slow phone.
Bluetooth transfer also went from 160 kb to 90 kb....
Does anyone know how it can be fixed? what about the 5ghz band for the WiFi on the phone?

Yes, same WiFi problem with safe mode. Everything was perfect until the upgrade to Lollipop. Now WiFi speed is 1/10 of before, and phone is slow in general. realy sad, sometimes even whatsapp messages takes minutes to be delivered.
Does anyone know how to select only 5ghz channel for the WiFi on the phone?

No notifications in notification bar on lock screen after Lollipop upgrade

Before my G3 was "upgraded" to 5.01, I could double tap the screen, the lock screen would come up, and at the top of the screen in the notification bar, there would be icons for new SMS, emails and calendar events, if there were any new ones.
After the 5.01 "upgrade", that is no longer the case. I have to actually unlock the screen, and then the icons in the notification bar are visible.
I've heard and read that the 5.01 upgrade now lets you have notifications directly on the lock screen. That is NOT what I am referring to. This is the actual notification bar icons, which worked before the "upgrade", but now do not.
The first image below show where the notifications for SMS, emails, calendar events, etc used to be shown. The second image shows the icons are visible after unlocking the phone.
So, does anyone know how to make the notifications show up in the notification bar while the lock screen is displayed?

All the notifications for the G2 and G3 have been under the clock that I have seen and no indicators in the bar.

No sounds after lollipop upgrade

Similar Messages

Maybe you are looking for